Database Info

Request for software.

hey , i would be very happy if someone could provide me with the following ROM for the gear s3 frontier SM-R760.
the firmware version is R360XXU1BPK5 / R360OXA1BPK5.
cheers .

R360XXU1BPK5
Click to expand...
Click to collapse
But you know you request SM-R360 Firmware for SM-R760...
Best Regards

software info
I saw in a post where Samsung said it rolled out that version for the SM-R760.

Try to read again... for instance here:
https://www.sammobile.com/2016/11/23/gear-fit-2-now-getting-a-new-firmware-update/
1.
R360XXU1BPK5
You can Google this...
Is SM-R360 also known as Gear Fit 2
2.
This Firmware + news is over 1 year old...
Only as info...
No idea if this helps you...
Best Regards

can someone send me link firmware for my
i cant find sm-r760-b4a5

Gear S3 Sensors not working after recent update

Sensors like wrist wake up, heart rate monitoring etc are not working after the latest update.
I also did multiple watch reset, factory reset, cleared both gear app & plugins data.
However, my friend's watch is working even after this update, we bought it together. So, it happened to few unlucky ones only.
The only difference between our watch is MCU version (checked using test mode, sensor hub, *#0*#):
My MCU version is BR010 (Status: Fail) where as his MCU version is BR0118032200 (Status: Pass).
I think this is the probable cause, may be my update was not applied well or fully since we have exact same watch brought from same place at same time.
Hope next update will fix it.
Tizen version: 3.0.0.2
Software version: R760XXU2CRG3
Model: SM-R760

I have this problem not... seen yet...
At the moment I am on FT30 Combination Firmware:
Code:
CQL1
Attached is Screenshot...
No idea if output depend on Firmware Version...
Later I will compare with FTMA BQC2... Combination Firmware.
I can only offer for tests... CRC3 Firmware from SM-R760... Tizen 3:
https://www.file-upload.net/download-13169587/R760XXU2CRC3_sideloadWork.7z.html
Maybe somebody can test if downgrade fix this problem...
netOdin + Instructions + Videos is here:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
For Flashing Firmware...
Best Regards

Could you please guide me through downgrading process, I can take risk.
Where can I get files for R760XXU2CRG3 ?
Let me know.

R760XXU2CRG3 is only on paid sites for money...
Try CRC3...
Link I allready posted 2 times...
Or older CQL1:
https://forum.xda-developers.com/gear-s3/development/rom-samsung-gear-s3-sm-r760-t3755374
"Guide" is here:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Best Regards

@5ajish
Any kind of progress?
You tried to dowgrade?
https://us.community.samsung.com/t5.../board-id/wearabletech/thread-id/24567/page/3
Here someone wrote about poweroff for looooooooooong time:
https://us.community.samsung.com/t5/Wearable-Tech/Gear-S3-frontier-sensors-don-t-work/td-p/315405
Other idea is to check if maybe as Standalone Watch...
https://www.youtube.com/watch?v=2bVpAItyzWE
Idea is to iliminate Phone/Gear Software crap Bugs...
To check if Gear alone can do Sensor Reset to Factory default...
Best Regards

Thanks @adfree
One of my friend suggested to wait for next update and as per the site you gave above, samsung larry is also saying to wait till next update.
So, I have not done any downgrade yet, if nothing works I will probably do it soon in future and let you know.
Thanks for your kind help.

Thanks @adfree
One of my friend suggested to wait for next update and as per the site you gave above, samsung larry is also saying to wait till next update.
So, I have not done any downgrade yet, if nothing works I will probably do it soon in future and let you know.
Thanks for your kind help.

adfree said:
I have this problem not... seen yet...
At the moment I am on FT30 Combination Firmware:
Code:
CQL1
Attached is Screenshot...
No idea if output depend on Firmware Version...
Later I will compare with FTMA BQC2... Combination Firmware.
I can only offer for tests... CRC3 Firmware from SM-R760... Tizen 3:
https://www.file-upload.net/download-13169587/R760XXU2CRC3_sideloadWork.7z.html
Maybe somebody can test if downgrade fix this problem...
netOdin + Instructions + Videos is here:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
For Flashing Firmware...
Best Regards
Click to expand...
Click to collapse
I have the exact same model, R760 with Tizen 3.0.0.2 I also lost Heart Rate monitor, wake-up gesture, etc.
I followed what you said and I successfully downgraded to the ROM file that you provided. I know that it worked because I was prompted on the phone to do the update to the latest version (which caused the problem). However, I still have not regained the functionality and SensorHub in Test Mode still says FAIL.

...update to the latest version (which caused the problem)...
Click to expand...
Click to collapse
Can you please tell me your latest Version?
Because at the moment we have 3... depend on CSC/Sales Code...
CRG4
CRG5
CRH1
Click to expand...
Click to collapse
Other ideas...
A
Check as Standalone after Reset...
NOT connect to Phone
I mean this:
https://www.youtube.com/watch?v=JmgmUW1lyyo
B
Try Combination Firmware... is Standalone WITHOUT Phone...
Maybe "self healing"...
Only ideas...
Best Regards

Model: SM-R760
Tizen: 3.0.0.2
Software Version: R760XXU2CRH1
MCU Firm Version: BR010
MCU Name: BCM4774IUB2G
Thanks for trying to help.

MCU Name: BCM4774IUB2G
Click to expand...
Click to collapse
Interesting, looks like my Value on Screenshot/Picture:
https://forum.xda-developers.com/showpost.php?p=77326216&postcount=2
MCU Firm Version: BR010
Click to expand...
Click to collapse
Hmmmm...
I have longer Value... BR011blablabla...
But your Value looks like here:
My MCU version is BR010 (Status: Fail) where as his MCU version is BR0118032200 (Status: Pass).
Click to expand...
Click to collapse
Hmmmmmmmmm...
I have never updated to newer Version as CRE3...
not CRG3 nor CRG4 nor CRG5 nor CRH1...
Maybe if more userS can post Values... then maybe we can find if accidently something goes wrong...
Or special Hardware mismatch...
Best Regards

Well I did use the ROM that you uploaded. Would that have changed the MCU?

So the ROM when it is downgraded is R760XXU2CRC3. When Gear app updates the firmware it goes to R760XXU2CRH1.
I'm in the USA.

Code:
R760XXU2CRH[B]2[/B]/R760OXA2CRH[B]2[/B]
Is online in Vietnam...
No idea about Changelog...
Best Regards

https://us.community.samsung.com/t5/Wearable-Tech/Galaxy-Watch-Gyro-Stops-Working/td-p/384038
:good:
Also many other Bugs I saw on Gear S2 and S3 and Fit and...
Amazing Evolution...
Best Regards

adfree said:
https://us.community.samsung.com/t5/Wearable-Tech/Galaxy-Watch-Gyro-Stops-Working/td-p/384038
:good:
Also many other Bugs I saw on Gear S2 and S3 and Fit and...
Amazing Evolution...
Best Regards
Click to expand...
Click to collapse
That's crazy. Brand new watch already defective
Of course the Samsung moderators are of no help.
Thanks.

adfree said:
I have this problem not... seen yet...
At the moment I am on FT30 Combination Firmware:
Code:
CQL1
Attached is Screenshot...
No idea if output depend on Firmware Version...
Later I will compare with FTMA BQC2... Combination Firmware.
I can only offer for tests... CRC3 Firmware from SM-R760... Tizen 3:
https://www.file-upload.net/download-13169587/R760XXU2CRC3_sideloadWork.7z.html
Maybe somebody can test if downgrade fix this problem...
netOdin + Instructions + Videos is here:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
For Flashing Firmware...
Best Regards
Click to expand...
Click to collapse
I have tried downgrading the firmware yet no luck on sensor hubs.

Had the same issue, sent back for repair......Am told that the sensor is broken and they have to change the whole motherboard and also replaced new battery as I did also mention my battery draining fast.
But now I'm stucked on firmware 2.3.2.3 which was installed by the technician, it always show that I'm on 'latest software'.

Got the same problem here
MCU Firm Version: BR010
Bin Firm Version: BR0118032200
MCU Name: BCM4774IUB2G
Quick question though, is it because the MCU Firm Version & Bin Firm Version not same. I think I saw the attached pic above, both got the same version...

nikasraf85 said:
Got the same problem here
MCU Firm Version: BR010
Bin Firm Version: BR0118032200
MCU Name: BCM4774IUB2G
Quick question though, is it because the MCU Firm Version & Bin Firm Version not same. I think I saw the attached pic above, both got the same version...
Click to expand...
Click to collapse
Same here.
I sent mine to repair center and been told the motherboard needed to replace.
Since my s3 is out of warranty the cost is not worth repairing.(around 110USD)
Hope this is a software issue.

Gear S2 R720 Firmware collection

Hello!
Finally I got the latest firmware for the Galaxy Gear S2 R720 and older firmwares :
R720XXU2AOJ3 / R720OXA2AOJ3
R720XXU2BPA4 / R720OXA2BPA4
R720XXU2EPK5 / R720OXA2EPK5
R720XXU2FRC1 / R720OXX2FRC1
Link: https://mega.nz/#F!6MNFkIBA!4e-4_3EFb8aaw20KV01kaw
Enjoy it!

Are any of these ROMs UK or EU versions? I flashed the last one and Samsung pay doesn't work in the UK for me.

@shenery Samsung Pay unfortunately doesn't work in the UK full stop.

Can someone tell me where is the tread that explains how i chose the correct firmware version and how i flash it? This is the first time I'm interested in the forum of the Gear S2 and it looks interesting. Thanks!

sorry to necropost, but do you have, or know where i could get the firmware for the G735V? Im looking specifically for R735VVRU3DRC1. Any help would be greatly appreciated

Too late?
Youdoofus said:
sorry to necropost, but do you have, or know where i could get the firmware for the G735V? Im looking specifically for R735VVRU3DRC1. Any help would be greatly appreciated
Click to expand...
Click to collapse
Here is firmware for SM-735V: full-repair-firmware.com/2018/05/repair-firmware-r735v.html
Hope it isn't too late.

Davejaws said:
Here is firmware for SM-735V: full-repair-firmware.com/2018/05/repair-firmware-r735v.html
Hope it isn't too late.
Click to expand...
Click to collapse
its never too late to try to help someone out irrespective of the outcome. That being said, Sammy rolled out an update that fixed the issue. Watch has been back in business for a few months now. Super happy kiddo! He was so let down when it started effing up. Thanks for responding man, sincerely.

Is the latest version at the top of the page or bottom... Im on R732XXU2AOJ3 is this the base version? Many thanks

Kash20011 said:
Is the latest version at the top of the page or bottom... Im on R732XXU2AOJ3 is this the base version? Many thanks
Click to expand...
Click to collapse
The latest is R732XXU2FSI1

Thank you bbsc much appreciated this isn't in the list. Mine isn't updating automatically via the android app. So I'm assuming there's no fix for this other than using Odin as I've found no other mention.
I'll try to find the latest is this the 6mb one that updates battery life.
As i think I'll need to go through all the others to get to the latest version, if Odin is the way to go.
Thanks for the help.
Atb

Kash20011 said:
Thank you bbsc much appreciated this isn't in the list. Mine isn't updating automatically via the android app. So I'm assuming there's no fix for this other than using Odin as I've found no other mention.
I'll try to find the latest is this the 6mb one that updates battery life.
As i think I'll need to go through all the others to get to the latest version, if Odin is the way to go.
Thanks for the help.
Atb
Click to expand...
Click to collapse
All known R732 firmware versions are listed here.
The watch should autoupdate up to R732XXU2FRC1
I think, it's possible to find R732XXU2FSD1 for free over the internet.
And definitely, it's possible to get R732XXU2EPK5 from here,
Good luck.

Thank you for the helpful info, the files above Ive downloaded but they are in zips and password protected has anyone the password to decompress.
Many thanks again
---------- Post added at 08:23 PM ---------- Previous post was at 08:20 PM ----------
Found it wasnt looking there. Right down to flashing. Thanks windows4droid for the files thank goodness their hosted... fingers crossed.

i was able to connect with my iphone se 2020, but after connection issues i reset the watch but now i cant get it to connect. it works with my burner phone galaxy j5 2016

zippzYT said:
i was able to connect with my iphone se 2020, but after connection issues i reset the watch but now i cant get it to connect. it works with my burner phone galaxy j5 2016
Click to expand...
Click to collapse
that's normal, there is a bug in ios, you can not paired your gear twice ... you probably need to flash it.

Good morning every one,sorry for the intrusion, i'm new here.
Im Based in South Africa and I need a XFA (South African Region) Stock rom for my gear s2 SM-R720.
Would anyone be able to assist me please?
Thank you in advance

gear sport downgrade from tizen 4.0.0.4 to tizen 3.0.0.1

good morning I have a gear sport and since I upgraded to tizen 4.0.0.4 the battery lasts just 1 day and a half I wanted to know if it is possible to downgrade to tizen 3 or if I try you risk the brick of the sport gear

firmware R600XXU1CSF2
does anyone have this firmware? R600XXU1CSF2

I have only CSE2:
Code:
R600XXU1CSE2/R600OXA1CSE2
Overview Tizen + Firmware Versions for SM-R600:
https://doc.samsungmobile.com/SM-R600/KOO/doc.html
Best Regards

adfree said:
I have only CSE2:
Code:
R600XXU1CSE2/R600OXA1CSE2
Overview Tizen + Firmware Versions for SM-R600:
https://doc.samsungmobile.com/SM-R600/KOO/doc.html
Best Regards
Click to expand...
Click to collapse
can you load on drive or mega? even the cse 2 is fine because the csi1 sucks in battery

marco_lu said:
can you load on drive or mega? even the cse 2 is fine because the csi1 sucks in battery
Click to expand...
Click to collapse
if anyone wants to downgrade his gear sport to tizen 3 with the AIQ8 I confirm that it works without problems

R600xxu1arc4
does anyone have firmware R600XXU1ARC4 for gear sport?

guys the firmware download link is not working

Whats the diference between BQC5 and CQK3?

Hi everyone, new guy here, i just discovered odin and the firmware installation yesterday as i used the BQC5 to "repair" a gear s3 classic stuck in a reboot loop (Sorry if it is too much info but im really proud of myself as im not a very techsmart person), and i was wondering if it is worth changing to the CQK3 that i found in this forum using the same method as by some reason i cant actualize it further using the app , i read that it has tizen 3 and is able to hold more to the battery life of the watch (But i also read here about an update to the firmware that drains watch's battery),
In short im just wondering if it is worth it to go threw the hastle of changing them
Thanks a lot!

To be sure.
You repaired SM-R770?
I will try to find Tizen 4 Firmware for you...
Could take some time...
Best Regards

Yes i did! And thanks a lot!
adfree said:
To be sure.
You repaired SM-R770?
I will try to find Tizen 4 Firmware for you...
Could take some time...
Best Regards
Click to expand...
Click to collapse
Yes i did! And thanks a lot!

Sorry I am soo la ehm busy...
DSA1 is for instance here:
https://forum.xda-developers.com/smartwatch/gear-s3/rom-tizen-4-odin-files-sm-r765t-sm-t3892404
Best Regards