My CWM is pointed to my external SD card, so I can't install new ROMs, etc. How do I get CMW to point to the internal SD card when I boot into recovery? Thanks.
Long Version:
----------------------------------
Hello. I was preparing for a full wipe of my phone (Galaxy S3 i9300) for a clean flash for my next ROM. So I did was I got a SD Card Reader and plugged my SD Card in and put it in a laptop to copy the files, while suddenly, my SD Card got corrupted. I tried to format the SD Card with the same SD Card Reader (not knowing the Card Reader was faulty) but it made things worse. So, I took a different Card Reader, and formatted the SD Card and now all seems well. Until, when I put the .ZIP file in the SD Card, put the SD Card on my phone, and install .ZIP from SD Card on my phone using TWRP (2.8.6.1), it displays the error "E: Zip file is corrupt!" So naturally, I restarted the phone into recovery, formatted the SD Card using TWRP, changed the file system to FAT (vfat) and it displays the error "E: Unknown MTP message type: 1", then I tried repairing the file system, and it was successful. So I did was put the .ZIP in the SD Card again and try it again, with no luck.
I have already used all of these to format the SD Card and the phone still thinks the .ZIP file from the SD Card is corrupted:
Diskpart
Chkdsk
EaseUs Master Partition
Windows Format
SD Formatter (v4.0)
---------------------------------------
TL;DR
Phone got fully wiped, SD Card got corrupted while transfering files because of faulty Card Reader, SD Card got formatted a lot of times, Finally got the SD Card running, but now, if I put it inside the phone, it thinks the .ZIP File from the SD Card is corrupted.
What should I do?
p.s. (I already downloaded the same .ZIP file multiple times to make sure it was healthy, and it is)
zek.yuuki said:
Long Version:
----------------------------------
Hello. I was preparing for a full wipe of my phone (Galaxy S3 i9300) for a clean flash for my next ROM. So I did was I got a SD Card Reader and plugged my SD Card in and put it in a laptop to copy the files, while suddenly, my SD Card got corrupted. I tried to format the SD Card with the same SD Card Reader (not knowing the Card Reader was faulty) but it made things worse. So, I took a different Card Reader, and formatted the SD Card and now all seems well. Until, when I put the .ZIP file in the SD Card, put the SD Card on my phone, and install .ZIP from SD Card on my phone using TWRP (2.8.6.1), it displays the error "E: Zip file is corrupt!" So naturally, I restarted the phone into recovery, formatted the SD Card using TWRP, changed the file system to FAT (vfat) and it displays the error "E: Unknown MTP message type: 1", then I tried repairing the file system, and it was successful. So I did was put the .ZIP in the SD Card again and try it again, with no luck.
I have already used all of these to format the SD Card and the phone still thinks the .ZIP file from the SD Card is corrupted:
Diskpart
Chkdsk
EaseUs Master Partition
Windows Format
SD Formatter (v4.0)
---------------------------------------
TL;DR
Phone got fully wiped, SD Card got corrupted while transfering files because of faulty Card Reader, SD Card got formatted a lot of times, Finally got the SD Card running, but now, if I put it inside the phone, it thinks the .ZIP File from the SD Card is corrupted.
What should I do?
p.s. (I already downloaded the same .ZIP file multiple times to make sure it was healthy, and it is)
Click to expand...
Click to collapse
Try the opening the zip file on the sd card on your pc with winrar or 7 zip.
Else get a new SD Card
Hit thanks if i helped you.
ClawSpark said:
Try the opening the zip file on the sd card on your pc with winrar or 7 zip.
Else get a new SD Card
Hit thanks if i helped you.
Click to expand...
Click to collapse
Yes, the .zip file does work. I can open it on my pc
Sadly, I can't get a new SD Card. Mainly because I need this SD Card because it is a 32GB SDHC Class 10 SanDisk SD Card, and it's not cheap to get a new replacement (of the same SD Card).
I would like to know how to fix this corrupted SD Card. Because everytime I plug it into my PC (and use Windows Check Drive for Errors, and Chkdsk) and find there's no errors. And then when I finished placing the files into the SD Card, when I plug it the next time, everything got corrupted, but Windows still does not detect any errors on the drive..... wut
zek.yuuki said:
Long Version:
----------------------------------
Hello. I was preparing for a full wipe of my phone (Galaxy S3 i9300) for a clean flash for my next ROM. So I did was I got a SD Card Reader and plugged my SD Card in and put it in a laptop to copy the files, while suddenly, my SD Card got corrupted. I tried to format the SD Card with the same SD Card Reader (not knowing the Card Reader was faulty) but it made things worse. So, I took a different Card Reader, and formatted the SD Card and now all seems well. Until, when I put the .ZIP file in the SD Card, put the SD Card on my phone, and install .ZIP from SD Card on my phone using TWRP (2.8.6.1), it displays the error "E: Zip file is corrupt!" So naturally, I restarted the phone into recovery, formatted the SD Card using TWRP, changed the file system to FAT (vfat) and it displays the error "E: Unknown MTP message type: 1", then I tried repairing the file system, and it was successful. So I did was put the .ZIP in the SD Card again and try it again, with no luck.
I have already used all of these to format the SD Card and the phone still thinks the .ZIP file from the SD Card is corrupted:
Diskpart
Chkdsk
EaseUs Master Partition
Windows Format
SD Formatter (v4.0)
---------------------------------------
TL;DR
Phone got fully wiped, SD Card got corrupted while transfering files because of faulty Card Reader, SD Card got formatted a lot of times, Finally got the SD Card running, but now, if I put it inside the phone, it thinks the .ZIP File from the SD Card is corrupted.
What should I do?
p.s. (I already downloaded the same .ZIP file multiple times to make sure it was healthy, and it is)
Click to expand...
Click to collapse
Copy paste via USB cable? The ZIP might be corrupted in a way that the script is broken or somehing. Try copypasting the file via USB and if that doesn't work download a different ZIP.
janekmuric said:
Copy paste via USB cable? The ZIP might be corrupted in a way that the script is broken or somehing. Try copypasting the file via USB and if that doesn't work download a different ZIP.
Click to expand...
Click to collapse
Thanks for all the help. I was in contact with SanDisk and they are willing to replace the corrupted microSD Card. Anyways, thank you
I've flashed my tablet (SM-T800) according to the thread here:
http://forum.xda-developers.com/gal...android-6-marshmallow-tab-s-10-5-lte-t3219759
One of the instructions mentions coping SuperSU and GApps to the SD Card afterwards so they can be reflashed after an update. Does this mean I can't format the SD card as internal storage?
You can. But you still can copy files to SD card AFAIK.
I've been rooted for a while without any issues, until recently I'm not sure what happened but suddenly TWRP won't show the /mnt folder or be able to access anything on my SD Card, I've tried mounting and selecting the SD Card in TWRP settings but it displays 0MB and won't select it. All I see is my Internal Storage files, which means I can't flash anything easily. I don't know when it happened but it was working about a week ago. I formatted my SD Card as ext4 in TWRP itself and also tried NTFS on Windows.
NOTE: I can view the SD Card in Solid Explorer and on my computer, TWRP is the only one that can't mount/read any SD Card files or even recognize it.
Is there any way I can work around this without formatting the SD Card?
I have a new SD Card and I think this is the reason for my lost backup files in TWRP. How can I check this or can I check the sd card?
If it's a new SD card how are there backup files on it period, did you transfer the twrp folder to the new SD card?
PoochyX [emoji2959][emoji2959][emoji2959]
** Delete **