Related
Original Title: what is the solution <<>> cotulla
Hi guys
I was trying to upgrade my I mate Jam to HTCMAG_ROM_WWE_O2
I followed the instructions but after the hard reset the screen stay on USB and down there is v1.00 and nothing else, On my PC its only shows please wait and dont remove or dissconnect >>etc.
what is the solution with it,
regards
By the way where I can be back to the old version ,,
Which OS do you use on your PC?
Vista and 7 did not work for me. Only Xp.
orbN said:
Which OS do you use on your PC?
Vista and 7 did not work for me. Only Xp.
Click to expand...
Click to collapse
Yeah that was the problem,, I use WIndows 7 on my labtop,,
I tried at home using XP it worked but now the problem is showing on the screen as follows :
HTCMAG_ROM_WWE_3
by Cotulla
64RAM
Bad Radio
I tried to hard reset using contacts and calender with softreset it tells to press the green blah blah..
I did and still the same.
I tried to install any other upgrade else than WWE_3 but nothing
Help please;
Hi,
install the required radio 1.12.
So long,
MrFX
MisterEffiks said:
Hi,
install the required radio 1.12.
So long,
MrFX
Click to expand...
Click to collapse
Can't do anything. when I hard reset it shows the USB and version blah blah then it restart again..
I tried to install the original rom and any other rom but same problem.
if connected to the computer via USB it keep restarting over and over
and other solution ??
will Bootloader help ? I tried but it is still the same issue.
torontovka said:
Can't do anything. when I hard reset it shows the USB and version blah blah then it restart again..
I tried to install the original rom and any other rom but same problem.
if connected to the computer via USB it keep restarting over and over
and other solution ??
will Bootloader help ? I tried but it is still the same issue.
Click to expand...
Click to collapse
I'm Having the same problem, so please if anyone know the solution please post it here...
Thanks in Advance...
torontovka said:
Original Title: what is the solution <<>> cotulla
Hi guys
I was trying to upgrade my I mate Jam to HTCMAG_ROM_WWE_O2
I followed the instructions but after the hard reset the screen stay on USB and down there is v1.00 and nothing else, On my PC its only shows please wait and dont remove or dissconnect >>etc.
what is the solution with it,
regards
By the way where I can be back to the old version ,,
Click to expand...
Click to collapse
Hey I came up with a solution, worked for my device hope it would w0rk for y0u either...
Anyhow, when it shows usb/cable at the top and radio version at bottom, Press and hold Contacts and calendar button and press Reset button with your stylus, this will hard reset your device and will bring your device alive...
looking forward for your reply...
HaSnAiN.ZaiDi said:
Hey I came up with a solution, worked for my device hope it would w0rk for y0u either...
Anyhow, when it shows usb/cable at the top and radio version at bottom, Press and hold Contacts and calendar button and press Reset button with your stylus, this will hard reset your device and will bring your device alive...
looking forward for your reply...
Click to expand...
Click to collapse
just want to help to straighten !!
i-Mate JAM hard reset
To perform a full reset
A full device reset clears memory, deletes all data and restores the Pocket PC Phone to its default settings. Programs installed at the factory remain, erasing all data that you have created and programs you have installed. Press and hold the power button, and then use the stylus to press the soft reset button at the same time. Be sure you have backed up all your data in a SD card or on your PC before performing a full reset.
I am experiencing this problem where when i try to connect my phone to my laptop a message is displayed saying that USB DEVICE NOT RECOGNIZED. Also i am not getting that option in my phone too asking me in which mode to connect. I am not able to connect my phone as a storage media. I also tried factory reset and reset via stock rom but no avail. I am currently running on stock rom 4.1.1. any help would be appreciated.
thank you
pirlozme said:
I am experiencing this problem where when i try to connect my phone to my laptop a message is displayed saying that USB DEVICE NOT RECOGNIZED. Also i am not getting that option in my phone too asking me in which mode to connect. I am not able to connect my phone as a storage media. I also tried factory reset and reset via stock rom but no avail. I am currently running on stock rom 4.1.1. any help would be appreciated.
thank you
Click to expand...
Click to collapse
I have the same issue i can charge my phone but cannot connect via usb.
Also usb otg is not working
tried everything stock rom, Custom rom everything but to no use so i guess this is a hardware issue
Even i am facing the same issue going to head to the service center today let me see what can they do ? will update here
Edit 1 : visited the Service center and corrected the issue it was a connector issue a hardware problem which occur on the mmx devices
Try USBDeview & remove all previous instances
stealthroot said:
Even i am facing the same issue going to head to the service center today let me see what can they do ? will update here
Click to expand...
Click to collapse
Hi,
You can try installing USBDeview and remove all previous instances of Micromax A110, Mediatek, etc.. from your system, restart the system and then connect again phone to your system using USB cable. Your problem may get resolved.
Google for USBDeview software or get it from here
Hit thanks, if I helped.
thanks @priyarupesh i will give a look at it thanks
after i installed updates from KIES, following things happened just after update completed and i pulled my USB cable:
> it said after installing updates that disconnect and COnnect again....so did i...but i never connected neither it is charging with USB
> No vibrations!!
Got an idea?
I didn't get your first point.
Is your phone able to boot properly? If so try a factory reset or consider flashing stock.
read below
shubham41 said:
I didn't get your first point.
Is your phone able to boot properly? If so try a factory reset or consider flashing stock.
Click to expand...
Click to collapse
its working perfect...but only one problem after updating my firmware...which is>..""" its is chrged only when its is turned off"....just after i updated....no usb connection(doesnt even pick it)...it was al right...as i updated firmware through USB using kies
....
shubham41 said:
I didn't get your first point.
Is your phone able to boot properly? If so try a factory reset or consider flashing stock.
Click to expand...
Click to collapse
dont tell me to clean my port..as i already did this...problem arised just after update!!
Hey there, guys and gals,
I'm having a bit of an issue here, and it's somewhat serious.
The issue is as follows. I have Android 5.0.1 on my Nexus 5. When I connect my computer to my laptop... nothing.
Nothing at all. It doesn't show up in device manager, not even as unknown. Fastboot doesn't detect it, nor does ADB. I can't do anything, and it's scaring me. I don't know how I could have broken it, but I need to know how to fix it.
I'm happy to do whatever to get it working, so please help...
Update: Tried to factory reset, to see if it would fix the issue. It's stuck "Erasing...", and won't go further. I'm afraid my phone may be hard-bricked... Is it possible to reflash these using JTAG, and if so is there anyone that can assist with that process?
CypherX1389 said:
Hey there, guys and gals,
I'm having a bit of an issue here, and it's somewhat serious.
The issue is as follows. I have Android 5.0.1 on my Nexus 5. When I connect my computer to my laptop... nothing.
Nothing at all. It doesn't show up in device manager, not even as unknown. Fastboot doesn't detect it, nor does ADB. I can't do anything, and it's scaring me. I don't know how I could have broken it, but I need to know how to fix it.
I'm happy to do whatever to get it working, so please help...
Update: Tried to factory reset, to see if it would fix the issue. It's stuck "Erasing...", and won't go further. I'm afraid my phone may be hard-bricked... Is it possible to reflash these using JTAG, and if so is there anyone that can assist with that process?
Click to expand...
Click to collapse
Is it stock or what? are you rooted?
Also , keep in mind that the factory reset can take up to 30 minutes.
IMO it sounds like a busted cable/usb port on either side / incorrect drivers.
Edit : JTAG is not possible on our devices , access is locked from the chipset itself.
Are u on Windows 8.1 if so I had a problem with Windows thinking that my phone was a acer and I had to go the driver settings and manually tell it that it was a ADB USB connection then it would connect fine also could be USB cable I found the nexus 5 to be very picky about cables
Sometimes I get that but it solves by going into dev and checking and unchecking usb debugg, but sounds more like a busted usb plug
Have you considered that you may be using incorrect drivers on your PC? This issue can be caused by having improperly installed drivers.
dkconor said:
Have you considered that you may be using incorrect drivers on your PC? This issue can be caused by having improperly installed drivers.
Click to expand...
Click to collapse
Alxhn said:
Sometimes I get that but it solves by going into dev and checking and unchecking usb debugg, but sounds more like a busted usb plug
Click to expand...
Click to collapse
xstokerx said:
Are u on Windows 8.1 if so I had a problem with Windows thinking that my phone was a acer and I had to go the driver settings and manually tell it that it was a ADB USB connection then it would connect fine also could be USB cable I found the nexus 5 to be very picky about cables
Click to expand...
Click to collapse
Niflheimer said:
Also , keep in mind that the factory reset can take up to 30 minutes.
IMO it sounds like a busted cable/usb port on either side / incorrect drivers.
Edit : JTAG is not possible on our devices , access is locked from the chipset itself.
Click to expand...
Click to collapse
AndreIrawan97 said:
Is it stock or what? are you rooted?
Click to expand...
Click to collapse
Right. I'll address you all at once for ease.
Firstly, the USB connector functions fine. My USB-OTG cable still allows me to access files on a flash drive.
Secondly, drivers can't be an issue in this case. It won't even enumerate the device in device manager. As if the phone simply isn't plugged in.
Thirdly, Win8 isn't the issue, as I"ve had this phone connected to this computer many, /many/ times.
So it must be a problem within Android 5.0.1
But here's the problem. In order to install anything else, I'd have to install a recovery. In order to that, I need root. In order to root, I need USB. I'm lost, guys...
I just had an idea does towel root work on 5.0 if so u could try that?
xstokerx said:
I just had an idea does towel root work on 5.0 if so u could try that?
Click to expand...
Click to collapse
Hmm... That might work. I'll take a look. But if it succeeds, then something gets broken later in the process, this thing is a paperweight, right?
Edit: According to http://forums.androidcentral.com/an...29-rooting-nexus-5-towelroot.html#post4125236 Towelroot will never be possible on Lollipop. I didn't go much further than that though...
Ya I just read that to bummer
Edit: as of now there is no way to root without pc sounds like u may have some sort of hardware failure I'm guessing only way to fix is to send it in and that's 150 bucks min
xstokerx said:
Ya I just read that to bummer
Edit: as of now there is no way to root without pc sounds like u may have some sort of hardware failure I'm guessing only way to fix is to send it in and that's 150 bucks min
Click to expand...
Click to collapse
Well... This happened when I updated via OTA (after reinstalling the stock recovery) to 5.0.1 after 5.0. I did this all over USB. Immediately thereafter, it quit. I got it to boot, btw. The erasing problem fixed itself, and it's now running, but the USB is still stuffed. This is sounding more like software than hardware. Almost as if whatever chip talks via USB lost it's own firmware somehow.
Cable or driver 95% sure. Did you try connecting it to a windows 7 /linux pc ? And ... u can never be sure but try connecting to a usb2.0 port. I had those issues when I accidentally plugged my cable in my frontal panel ( usb3.0)
A few months ago I had the same problem, my phone got not recognized by adb or fastboot. I played around a whole day with drivers and stuff like that. At the end I found a post on the internet describing that not all USB cables are able to do adb connections and I should try the original USB cable that came with my Nexus 5. So I looked for that particular cable and hey presto it worked right away.
And 2$ usb cables do break over time. They might still charge , but one cold solder joint and no connection
CypherX1389 said:
Secondly, drivers can't be an issue in this case. It won't even enumerate the device in device manager. As if the phone simply isn't plugged in.
Click to expand...
Click to collapse
So you are correct. I didn't see that in your post, my bad.
Have you tried with another cable maybe?
Make sure you have either MTP or PTP checked in Settings/Storage/USB computer connection.
Niflheimer said:
Cable or driver 95% sure. Did you try connecting it to a windows 7 /linux pc ? And ... u can never be sure but try connecting to a usb2.0 port. I had those issues when I accidentally plugged my cable in my frontal panel ( usb3.0)
Click to expand...
Click to collapse
Georg2808 said:
A few months ago I had the same problem, my phone got not recognized by adb or fastboot. I played around a whole day with drivers and stuff like that. At the end I found a post on the internet describing that not all USB cables are able to do adb connections and I should try the original USB cable that came with my Nexus 5. So I looked for that particular cable and hey presto it worked right away.
Click to expand...
Click to collapse
Telyx said:
Make sure you have either MTP or PTP checked in Settings/Storage/USB computer connection.
Click to expand...
Click to collapse
Alxhn said:
Have you tried with another cable maybe?
Click to expand...
Click to collapse
Niflheimer said:
And 2$ usb cables do break over time. They might still charge , but one cold solder joint and no connection
Click to expand...
Click to collapse
I've tried multiple cables. I KNOW that this cable is fine for ADB, because it works fine for my other devices. All of them. I may be marked a newbie on the forums, but I'm really not one. When I first signed up for this account I was, but that was in what... '07?
I've tried:
Drivers (Obviously won't work.)
Cables
Rebooting
Factory Reset
Different Computers
Linux
Windows
Switching USB connection modes
Toggling Dev Mode/Debugging on/off
Nothing works. It HAS to be a software issue on the phone. I don't think anyone read it, but it's almost as if the IC that handles USB connections has lost it's firmware. I don't think that can happen, honestly, so it must be whatever's in the ROM that TALKS to that IC that's causing the issue. Problem is, I don't know how to fix the ROM without USB connection and Fastboot.
CypherX1389 said:
Nothing works. It HAS to be a software issue on the phone. I don't think anyone read it, but it's almost as if the IC that handles USB connections has lost it's firmware. I don't think that can happen, honestly, so it must be whatever's in the ROM that TALKS to that IC that's causing the issue. Problem is, I don't know how to fix the ROM without USB connection and Fastboot.
Click to expand...
Click to collapse
Its unlikely that the ROM will be the cause if the USB port suddenly stops working.
Do you have a custom recovery?
If not, then not much you can do except send it in for repair/replacement.
Ive just encountered an issue today with my new S7. It has just stopped fast charging and will not connect to my pc. I have tried countless cables and other sockets aswell as usb ports in the pc. If anyone has encountered an issue like this before it would be must appreciated if you could help. Thank you in advance
-Chambo123
Chambo123 said:
Ive just encountered an issue today with my new S7. It has just stopped fast charging and will not connect to my pc. I have tried countless cables and other sockets aswell as usb ports in the pc. If anyone has encountered an issue like this before it would be must appreciated if you could help. Thank you in advance
-Chambo123
Click to expand...
Click to collapse
I had the same issue with connecting to my laptop a few days ago, charging was fine. I tried different cables and USB sockets like you did. I tried changing the settings from charge to mtp but nothing worked. I ended up resetting my laptop, which luckily I had been thinking of doing for a few weeks. I then installed odin and drivers etc from scratch and everything's been working fine since.....fingers crossed.
Probably not the best answer you were hoping for but resetting helped me
Sent from my SM-G930F using Tapatalk
Update- Went to Samsung said it was due to a software issue and will not reapir due to me rooting it previously. I cannot see how this would be caused by a rooting issue. I do have a custom recovery and i lost my root last week sometime to an update of some sort. Anyone have some ideas? Would be much appreciated
back everything up and try flashing the fully stock image with Odin and see if it fixes it. if it doesn't, it's not a software issue.
-Ric- said:
back everything up and try flashing the fully stock image with Odin and see if it fixes it. if it doesn't, it's not a software issue.
Click to expand...
Click to collapse
When i connect my phone to my pc odin will not pick it up
How about while in TWRP? does the MTP mount option make the phone show up on the PC?
-Ric- said:
How about while in TWRP? does the MTP mount option make the phone show up on the PC?
Click to expand...
Click to collapse
Am currenty getting custom binary blocked by fap lock
seanicca said:
I had the same issue with connecting to my laptop a few days ago, charging was fine. I tried different cables and USB sockets like you did. I tried changing the settings from charge to mtp but nothing worked. I ended up resetting my laptop, which luckily I had been thinking of doing for a few weeks. I then installed odin and drivers etc from scratch and everything's been working fine since.....fingers crossed.
Probably not the best answer you were hoping for but resetting helped me
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Ignore that its just started playing up again