Please Help me Guys.....I've Moto G XT1033 (Indian model Dual Sim) - Moto G Q&A, Help & Troubleshooting

Guys I've Moto G XT1033 and i've been trying to flash it's stock firmware because it was bricked 3 days ago.....I tried different Firmwares...4.4.4,5.0.2 and 5.1.0 but it doesn't work.....at the starting when I use command "mfastboot.exe flash partition gpt.bin" I'm getting few error like "Version downgraded for primary_gpt" and while using this command "mfastboot.exe flash motoboot motoboot.img" i'm getting this error "version downgraded for tz".......Plz help me
How to add attachments??

resurrecting your device depends on how badly you've bricked it.
how did you brick it in the first place?

just ignore the bootloader and gpt image, its due to the Downgrade you can follow this instructions
https://forum.xda-developers.com/showthread.php?t=2700502&page=64
which work fine on your falcon.

Related

Motorola Moto G - Flashing stock failing with fastboot

Hello everyone
I am new here.
I need some assistance with my moto g.
I previously unlocked my Moto G's bootloader but realised that I just wanted it on stock and locked so I didn't damage it, so I managed to relock my
phone's bootloader and got it back to a stock rom.
After installing a system update a few days ago, my phone came back with the
"Warning - bootloader unlocked!" logo after installing a system update.
So I decided to try and reflash the stock firmware and original logo.bin from the XDA Site.
However, my flashes are failing and my moto g is stuck in a bootloop with no rom to boot up to, I have adb minimal fastboot and motorola drivers
/ adb drivers installed.
What happens: I power on the phone into bootloader mode, then I try to flash the ROM I got from droid-developers site, but whenever I try to relock
my bootloader it shows the following:
...
Ready to flash signed images!
OK: (time)
I do fastboot flash partition gpt.bin and I get:
Preflash validation failed!
SST lock failure!
Also trying to issue the command to relock the bootloader gives me
SST lock failure!
I get other errors too when flashing the sparsechunk images, it gives: Invalid PIV signed image! and for motoboot and boot images it gives: Preflash validation failed!
version downgraded for boot.
etc
I cannot recover my stock rom due to these errors, I've searched everywhere (on google) and here and I am desperate to flash the stock rom back and relock bootloader again so I can use the phone.
I am really stuck and my phone will not get out of a bootloop
Any help is really much appreciated as I need to get my phone working so I can use it
You don't need to relock the bootloader. Just follow this tutorial:
http://forum.xda-developers.com/showthread.php?t=2542219​
lost101 said:
You don't need to relock the bootloader. Just follow this tutorial:
http://forum.xda-developers.com/showthread.php?t=2542219​
Click to expand...
Click to collapse
I followed the tutorial, but when I get to the flashing stage, I get:
Preflash validation failed,
SST lock failure!
And version downraded for gpt.bin
it seems to be failing to flash these files.
What do I need to do?
You need to provide more information for people to help you. Have you upgraded to 4.4.4?
I had a similar issue when rooting my phone, and all I had to do was unplug the phone from the computer, restart the phone and computer, and then try again.
GrammarNazi said:
I had a similar issue when rooting my phone, and all I had to do was unplug the phone from the computer, restart the phone and computer, and then try again.
Click to expand...
Click to collapse
But did you downgrade from 4.4.4 to 4.4.2?
What model do you have?
Can you explain us all the steps?
Thanks
First unlock your bootloader again. You have to downgrade from 4.4.4 to 4.4.3 then to 4.4.2. During the downgrades you have to follow the same kind of firmware (example: 4.4.4 retail EU -> 4.4.3 retail EU -> 4.4.2 retail EU). When you're done if you want you can relock the bootloader.

Need gpt.bin 4.4.4 for XT1039 Moto G LTE.

The story :
I flashed gpt.bin GPE 4.4.4 from a moto G on a moto G LTE using mototool. Now my device is bricked like a stone, it can't boot anymore and stuck on logo boot. I am not an expert at all but i have the feeling that the cause is that system partition is damaged due to wrong gpt.bin : for example each time i try to flash system.img_sparsechunk.3 with mfastboot, the phone returned "too large" message.
The solution is probably to flash the correct gpt.bin for my model. I have a gpt.bin version 4.4.3 Xt1039 but can't downgrade without returning an error "Preflash validation failed" on "mfastboot flash partition gpt.bin" command : so i guess that my only hope is to find and flash the gpt.bin 4.4.4 for XT1039 to solve the problem.
But I can't find it : do you have a link to download gpt.bin 4.4.4 for XT1039 ?
Search for the 4.4.4 OTA for your device and you'll should the 4.4.4 gpt.bin in it.
Really appreciate ! I'am verry happy and relieved after spending more than 12H to understand and solve the problem !
So first i flashed the gpt.bin 4.4.4 of the OTA update package from your link, secondly i followed the instructions from this guide to flash 4.4.3 XT1039 ROM ( mfastboot method http://forum.xda-developers.com/showthread.php?t=2542219 ) and now for the first time for a long time my Moto G LTE start normaly, it is unbrick !
Thank you very much !

moto g bootloop after stormy night

good day my Moto G is in a bootloop after a night charge've tried different firmware and none out of the bootloop other than that the usb debbuging is never off've rooted and the bootloader is closed my Moto G is the xt1032 international version please help me to fix it since I can not afford another smartphone firmware that I have is the US retail 5.0.2 repair these firmware with brazil retail 5.0.2 us retail 5.0.2 and us retail 4.4.4 please help me
londerz said:
good day my Moto G is in a bootloop after a night charge've tried different firmware and none out of the bootloop other than that the usb debbuging is never off've rooted and the bootloader is closed my Moto G is the xt1032 international version please help me to fix it since I can not afford another smartphone firmware that I have is the US retail 5.0.2 repair these firmware with brazil retail 5.0.2 us retail 5.0.2 and us retail 4.4.4 please help me
Click to expand...
Click to collapse
please. Help me
londerz said:
please. Help me
Click to expand...
Click to collapse
When you flash the firmware image - what is happening? Provide a log (copy and paste fastboot screen)
londerz said:
good day my Moto G is in a bootloop after a night charge've tried different firmware and none out of the bootloop other than that the usb debbuging is never off've rooted and the bootloader is closed my Moto G is the xt1032 international version please help me to fix it since I can not afford another smartphone firmware that I have is the US retail 5.0.2 repair these firmware with brazil retail 5.0.2 us retail 5.0.2 and us retail 4.4.4 please help me
Click to expand...
Click to collapse
lost101 said:
When you flash the firmware image - what is happening? Provide a log (copy and paste fastboot screen)
Click to expand...
Click to collapse
Hello this is what happens in the different firmware I've tried
Xt1032 Brazil 5.0.2
fastboot flash partition gpt.bin:bootloader) Preflash validation failed FAILED (remote failure)
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0:bootloader Preflash validation failed FAILED (remote failure)
fastboot flash system system.img_sparsechunk.1bootloader) Preflash validation failed FAILED (remote failure)
fastboot flash system system.img_sparsechunk.2bootloader) Preflash validation failed FAILED (remote failure)
fastboot flash system system.img_sparsechunk.3bootloader) Preflash validation failed FAILED (remote failure)
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
When I try to downgrade the xt1032 version 4.4.4 us retail But the same thing happens in the version of brazil
The amazing thing is that the retail 5.0.2 xt1032 us not give me error in any of the commands but whatever the Moto g remains in bootloop
Unlocking Bootloader can sometimes resolve the 'Preflash validation' error. Corrupt emmc is the likely cause of your problems and probably unsolvable at this time. You can however - unlock bootloader - boot into TWRP (fastboot boot twrp.img) and try flashing a custom ROM zip.
lost101 said:
Unlocking Bootloader can sometimes resolve the 'Preflash validation' error. Corrupt emmc is the likely cause of your problems and probably unsolvable at this time. You can however - unlock bootloader - boot into TWRP (fastboot boot twrp.img) and try flashing a custom ROM zip.
Click to expand...
Click to collapse
if I 'll explain in more detail what you appreciate a lot
lost101 said:
Unlocking Bootloader can sometimes resolve the 'Preflash validation' error. Corrupt emmc is the likely cause of your problems and probably unsolvable at this time. You can however - unlock bootloader - boot into TWRP (fastboot boot twrp.img) and try flashing a custom ROM zip.
Click to expand...
Click to collapse
I get that twrp.img is not a recognized command
Copy and paste fully any fastboot errors. Latest version of TWRP is here:
http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621​
This FAQ explains how to set up fastboot and flash a custom recovery:
http://forum.xda-developers.com/showthread.php?t=2537119​

Moto G (xt1033) After Unbrick Not Accepting any GPT..

hey guys and moto experts..
device was on qualcomm mode.. i recover it by "blankflash_lollipop" unbrick tool..then flashed gpt and motoboot,
i used this fw's "XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml" gpt part,
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
then flashed recovery TWRP and used this ROM "XT1033_Retail_Asia_51_Untouched.zip" it worked..
but imei was 0.. so i used the fastboot erase all command and after that baseband is gone and device is not detecting the sim card..after that i used the Bootloader Brcik tool "Bootloader Bricker" and recovered again with "blankflash_lollipop"..but at this time not accepting any gpt part.. and gives error; version downgraded for primary_gpt
i tried these fw's gpt part..
BRASIL_XT1033_5.0.2_LXB22.46-28_cid12_CFC.xml
XT1033_FALCON_RETBR_DS_5.1_LPB23.13-56_cid12_CFC.xml
XT1033_FALCON_AMXBR_DS_5.1_LPB23.13-56_cid12_CFC.xml

[Completed] Stock ROM flashing failed error on moto G3

Currently I am using custom ROM lineage 14.1 on Moto G3. Now I want to install stock ROM 6.0.1. But during Installing of stock ROM I have shown below error massage during partition gpt, boot, system file flashing in PC screen and bootloader manu log screen.
"Preflash validation failed"
"Failed (Remote failure)"
On bootloader many screen
"Version downgrade for primary gpt.
I can't install stock ROM and relock my phone.
Mobile details
Moto G3 model no. XT1550
Hi !
Here is a Moto G 2015 index , flash the correct firmware for your device variant
https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Good luck !

Categories

Resources