I have an old, locked Rogers Communications (Canada) Samsung Galaxy Note 3, which I want to unlock and root. Unfortunately, I rooted before unlocking and damaged some system files so that the exchange server services stops all the time, and only the Home button works, the Menu and Back-up buttons don't work. Since there was no data on the phone, I reset it to factory settings, but this did not correct the exchange services or the buttons problem. Downloaded the correct stock ROM file and and tried to install it using Odin ROM installer but it failed with the following message:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1207)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What are the correct steps to repair the damage.
Related
UPDATE: I switched USB ports and it seems that it's now flashing...standby
UPDATE 2: All fixed.
Unhide for original post:
I think I need a bit of help. So last night busybox updated to the latest version (from the app). Now today when I go to start up my phone it starts up, but stays on the Galaxy S3 logo. I can boot into CWM recovery and download mode just fine. So I was attempting to flash (via Odin) back to stock so I could start fresh. I was following the advice from here: http://forum.xda-developers.com/showthread.php?t=1840030. And the bootchains flashed fine, but the root66.tar keeps failing.
This is the log I get:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_I535VRBMA2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What am I doing wrong?
Also I was running a older build of SynergyROM if that's of any use.
Hello
Here is a brief history of my SGH-I337. I need help to debug.
1. Screen cracked. Got it fixed by Samsung, where it was reset to Factory default.
2. Try to install Lollipop through Kies3, when the phone got stuck in EFR and cannot boot up.
3. Tried everything that freakboy13 posted -- did not fix the issue.
4. downloaded firmware from Sammobile.com; below is the Odin error log.
-- begin error log----
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
-- end of error log------
Do I need to check other boxes to overcome this write fail? Appreciate any suggestions.
thanks
Hi, thank you for using XDA Assist. Odin is failing because you can't flash the mdl firmware on your device. You need to flash nb1, which is not available on sammobile. See this excellent guide by gutt13, http://forum.xda-developers.com/showthread.php?t=2616221. If you have further questions ask in that thread. They are the experts on your device.
Thread closed.
I followed a tutorial because its looked the best i had seen for a while and it had most the files included it was off this forum in the developers section so i booted my s5300 into download mode started up odin 3 and begin placing the files in the correct paths. Once in the correct paths i pressed start and here is what i get a fail? can anyone explain why this might be happening i think the old owner who gave me the brick said he had partioned it so he could use a custom rom ive booted into recovery mode and i see is it cyanmobile amd clockworkmod but i think the clockwork dont have any files? and something else anyway here is the code of the odin result any help would be very helpful has ive been up all night trying to repair it to no avail i dont know how much more i can take hehe?:laugh:
EDIT: might be worth mentioning it does still have a custom rom on the partition i can successfully install it boot when i reboot it just says onkey 7s reset?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5300_XXLF5.tar.md5 is valid.
<OSM> MODEM_S5300_XXLF5.tar.md5 is valid.
<OSM> CSC_S5300_BTULF1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
pablo77777 said:
I followed a tutorial because its looked the best i had seen for a while and it had most the files included it was off this forum in the developers section so i booted my s5300 into download mode started up odin 3 and begin placing the files in the correct paths. Once in the correct paths i pressed start and here is what i get a fail? can anyone explain why this might be happening i think the old owner who gave me the brick said he had partioned it so he could use a custom rom ive booted into recovery mode and i see is it cyanmobile amd clockworkmod but i think the clockwork dont have any files? and something else anyway here is the code of the odin result any help would be very helpful has ive been up all night trying to repair it to no avail i dont know how much more i can take hehe?:laugh:
EDIT: might be worth mentioning it does still have a custom rom on the partition i can successfully install it boot when i reboot it just says onkey 7s reset?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5300_XXLF5.tar.md5 is valid.
<OSM> MODEM_S5300_XXLF5.tar.md5 is valid.
<OSM> CSC_S5300_BTULF1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=2560314
Please help me with this, my phone gets stuck on at&t logo so i can only go into download mode and every time i flash cwm recovery or stock rom using Odin, it says complete (write) operation failed. So what happened was that i had cm 12.1 lollipop and i did not want it anymore and so i got an at&t stock firmware from galaxys3.com and i flashed it with cwm recovery then i ticked wipe data, dalvik cache then it flashed and now its bricked this happens on odin every time
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747MVLUFOB1_I747MOYBFOB1_I747MVLUFOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
NaweedHabib said:
Please help me with this, my phone gets stuck on at&t logo so i can only go into download mode and every time i flash cwm recovery or stock rom using Odin, it says complete (write) operation failed. So what happened was that i had cm 12.1 lollipop and i did not want it anymore and so i got an at&t stock firmware from galaxys3.com and i flashed it with cwm recovery then i ticked wipe data, dalvik cache then it flashed and now its bricked this happens on odin every time
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747MVLUFOB1_I747MOYBFOB1_I747MVLUFOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Here is where you should ask your questions:
AT&T Galaxy S III Q&A, Help & Troubleshooting
Here is the homepage for your device model:
Samsung Galaxy S III i747
The expert advice you need can be found there.
Good luck!
Hello everyone,
I am trying to install the original Samsung rom back on my phone.
Samsung SM-930F.
I've downloaded the lastest Samsung rom and added the all the files as suggested in a tutorial here on XDA.
However, the sceen keeps showing the following.
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 3906 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 3950 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Dylan25111 said:
Hello everyone,
I am trying to install the original Samsung rom back on my phone.
Samsung SM-930F.
I've downloaded the lastest Samsung rom and added the all the files as suggested in a tutorial here on XDA.
However, the sceen keeps showing the following.
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 3906 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 3950 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try some of these suggestions
https://forum.xda-developers.com/ga...ning-to-ota-oreo-beta-3-t3920885/post79593856
spawnlives said:
Try some of these suggestions
https://forum.xda-developers.com/ga...ning-to-ota-oreo-beta-3-t3920885/post79593856
Click to expand...
Click to collapse
Thank's it seems to be working
Hi I'm trying to use odin to update my so active.. I really love this phone but following all instructions gets held up at set up connection.. is there someone who can just do this for me I'm exhausted. I don't want to give this phone up. . Please help. .I've tried different cables not such. .thanx
Jazzygirl08 said:
Hi I'm trying to use odin to update my so active.. I really love this phone but following all instructions gets held up at set up connection.. is there someone who can just do this for me I'm exhausted. I don't want to give this phone up. . Please help. .I've tried different cables not such. .thanx
Click to expand...
Click to collapse
Do you have the Samsung drivers installed? Do you have adb activated in the developer settings?