I have experience rom'ng Samsung phones and have never run into something this bad. My S6 Edge SM-G925P will not flash any stock/non-stock rom. Tried OI1/OH/OJ/OF, all fail Nand Write. Some suggest, split ROM in pieces and install separately in ODIN, but do not explain what that means and how to do it. When USB (official samsung cable) plugged in, phone gives Smart Switch error. I am attaching screenshots as these say it all. Please, any 'good' advice on how to attempt fixing this and getting ANY Android OS version installed? Am at wits end with this. Also, I can't get the SN because the dog ate the box and it's not on the back of the phone, plus phone won't boot other than download mode.
I was finally able to successfully install a Stock ROM and when it rebooted it showed the Samsung & Sprint logos and started charging. Currently at 40% and will try to boot the device shortly. I wanted to share that what helped was to use this specific ODIN version found at http://www.galaxys6edgeupdate.com/odin3-v3-10-6-download/ and OJ7 rom. Note the image on the website shows Odin with SM-G920/G925 where other ODINs don't show this. Confirmed! The phone rebooted and is now working. As a matter of fact, much of the data on it was maintained. Now just need to unlock it!
What files did you use.. I am on CUstom Binary and Status and get a nand fail on sboot.sh with a SW REV CHECK FAIL DEVICE 4 BINARY 3
anonymoustl said:
What files did you use.. I am on CUstom Binary and Status and get a nand fail on sboot.sh with a SW REV CHECK FAIL DEVICE 4 BINARY 3
Click to expand...
Click to collapse
I am in the same boat as well ;(
yall still need help with frp lock? if so message me
Kennii said:
yall still need help with frp lock? if so message me
Click to expand...
Click to collapse
Kennii,
I am experiencing the issues mentioned above. Can't flash with any of the stock roms using odin for my SM-G925P neither can come up with a serial number that works with smart switch.
I found a serial number for SM-G925I and the smart switch software goes to the next step. Do you have any serial number that goes with SM-G925P?
I have a SM-G955U1 I'm trying to downgrade to Nougat since Oreo totally borked the bluetooth in both my cars (both BMW's - audio connects ~50% of the time, phone book no longer transfers).
I'm failing to flash G955U1UES2AQL1 with Prince Cosmey Odin v3.12. The error I keep receiving is:
SW REV CHECK FAIL : [abl]Fused 3 > Binary 2
I've also tried to flash G955USQS2BRB1.
A quick Google says it's because I'm trying to downgrade versions, but doesn't this model have an unlocked bootloader?
What am I doing wrong? Any guidance is greatly appreciated.
What version are you currently on?
Just my guess is that your on v3 not a v2 bootloader hint the error. The secure bootloader is saying it's a 3 and the firmware binary is saying I'm a 2. Since they dont match no go. Same if you tried to flash a 1 you would probably see Fused 3 > Binary 1
bmxmike said:
What version are you currently on?
Just my guess is that your on v3 not a v2 bootloader hint the error. The secure bootloader is saying it's a 3 and the firmware binary is saying I'm a 2. Since they dont match no go. Same if you tried to flash a 1 you would probably see Fused 3 > Binary 1
Click to expand...
Click to collapse
any solution plz
I desperately need downgrade from oreo to nougat version and this is my problem, the bootloader version...
there is something like nougat with bootloader 2could be official (preferably) or custom rom (last option)...
I know this should be in Rom,kernels,rev. I'm a junior member so I can't post their yet
So I've recently rooted my phone. I got too excited and tried installing a custom boot animation that screwed up my phone and it couldn't shut down only restart.
Then I had an idea to wipe the system through TWRP and I accidentally deleted everything (Wiped internal storage) so download mode was blank. Then I tried installing stock Rom but I extracted it, removed the stock recovery.img.lz4 and replaced it with the TWRP Recovery. For some weird reason the firmware was acting weird with T mobile roaming and stuff that wasn't supposed to be there cause I'm not a t mobile customer. Then I just flashed stock Rom (Augaust security patch) with Odin. Aaand I got RMM Locked again :crying::crying:
I thought flashing combination firmware again would allow me to access the OEM unlock option and flash TWRP again.
When I tried to flash I got an error SW rev check fails device 3 binary 2. If anyone could help me I would really appreciate it. Also if anyone knows why I got the T mobile stuff after I did the TWRP thing (out of curiosity) I would like to know. Please respond.
DeadRatGames said:
I know this should be in Rom,kernels,rev. I'm a junior member so I can't post their yet
So I've recently rooted my phone. I got too excited and tried installing a custom boot animation that screwed up my phone and it couldn't shut down only restart.
Then I had an idea to wipe the system through TWRP and I accidentally deleted everything (Wiped internal storage) so download mode was blank. Then I tried installing stock Rom but I extracted it, removed the stock recovery.img.lz4 and replaced it with the TWRP Recovery. For some weird reason the firmware was acting weird with T mobile roaming and stuff that wasn't supposed to be there cause I'm not a t mobile customer. Then I just flashed stock Rom (Augaust security patch) with Odin. Aaand I got RMM Locked again :crying::crying:
I thought flashing combination firmware again would allow me to access the OEM unlock option and flash TWRP again.
When I tried to flash I got an error SW rev check fails device 3 binary 2. If anyone could help me I would really appreciate it. Also if anyone knows why I got the T mobile stuff after I did the TWRP thing (out of curiosity) I would like to know. Please respond.
Click to expand...
Click to collapse
It seems that your filmware is corrupt.
Which bootloader binary are you on, binary 2 or 3, Nougat or Oreo?
Remember that if you have binary 3 you cannot downgrade to binary 2.
And don't use the combination rom anymore because you have to know what you're doing its risky.
I can advise you to do a fresh install of the official country filmware from out of the box, and after that update to the latest filmware version, and a big chance to get rid of RMM prenormal state, with oem-unlock back.
If you're on binary 2, just flash an official filmware from your country before the August security patch, after that update it again to the latest version.
solamente said:
It seems that your filmware is corrupt.
Which bootloader binary are you on, binary 2 or 3, Nougat or Oreo?
Remember that if you have binary 3 you cannot downgrade to binary 2.
And don't use the combination rom anymore because you have to know what you're doing its risky.
I can advise you to do a fresh install of the official country filmware from out of the box, and after that update to the latest filmware version, and a big chance to get rid of RMM prenormal state, with oem-unlock back.
If you're on binary 2, just flash an official filmware from your country before the August security patch, after that update it again to the latest version.
Click to expand...
Click to collapse
Thanks for responding, I'm currently on binary 3 on android Oreo August security patch.
What do you mean by a fresh install from out of the box. Like Download the latest version from updato?
I apologise if I seem a little clueless lol.
DeadRatGames said:
Thanks for responding, I'm currently on binary 3 on android Oreo August security patch.
What do you mean by a fresh install from out of the box. Like Download the latest version from updato?
I apologise if I seem a little clueless lol.
Click to expand...
Click to collapse
What I meant is the first official filmware you had when the phone was bought,and if you were on binary 2, but that doesn't matter now you're on binary 3.
Now you have to flash the official filmware from your country, it must be a binary 3 filmware because downgrading will not work.
After that you have to do jailtime for 168 hours untill oem unlock is gonna appear again.
Do not restart the phone or disconnect the network at this time.
solamente said:
What I meant is the first official filmware you had when the phone was bought,and if you were on binary 2, but that doesn't matter now you're on binary 3.
Now you have to flash the official filmware from your country, it must be a binary 3 filmware because downgrading will not work.
After that you have to do jailtime for 168 hours untill oem unlock is gonna appear again.
Do not restart the phone or disconnect the network at this time.
Click to expand...
Click to collapse
Do I really need to wait 168 hours lol?
DeadRatGames said:
Do I really need to wait 168 hours lol?
Click to expand...
Click to collapse
Unfortunately you do with the 1 august patch, if you can find a previous official filmware, for example april, may, june or juli patch you can do the trick to set back the date and time 7 days and get oem unlock back.
But this does not work anymore with the august patch or later, that means you have to wait 7 days.
solamente said:
Unfortunately you do with the 1 august patch, if you can find a previous official filmware, for example april, may, june or juli patch you can do the trick to set back the date and time 7 days and get oem unlock back.
But this does not work anymore with the august patch or later, that means you have to wait 7 days.
Click to expand...
Click to collapse
How do I downgrade though?
DeadRatGames said:
How do I downgrade though?
Click to expand...
Click to collapse
At this time its impossible to downgrade from a binary 3 towards 2 or from 2 to 1.
You can only upgrade, Samsung has blocked the downgrading from a higher to a lower binary, therefore it is useless to try it with Odin, it won't succeed.
Maybe someone else knows a way around to downgrade, but I don't.
DeadRatGames said:
I know this should be in Rom,kernels,rev. I'm a junior member so I can't post their yet
So I've recently rooted my phone. I got too excited and tried installing a custom boot animation that screwed up my phone and it couldn't shut down only restart.
Then I had an idea to wipe the system through TWRP and I accidentally deleted everything (Wiped internal storage) so download mode was blank. Then I tried installing stock Rom but I extracted it, removed the stock recovery.img.lz4 and replaced it with the TWRP Recovery. For some weird reason the firmware was acting weird with T mobile roaming and stuff that wasn't supposed to be there cause I'm not a t mobile customer. Then I just flashed stock Rom (Augaust security patch) with Odin. Aaand I got RMM Locked again :crying::crying:
I thought flashing combination firmware again would allow me to access the OEM unlock option and flash TWRP again.
When I tried to flash I got an error SW rev check fails device 3 binary 2. If anyone could help me I would really appreciate it. Also if anyone knows why I got the T mobile stuff after I did the TWRP thing (out of curiosity) I would like to know. Please respond.
Click to expand...
Click to collapse
1. You didn't posted in the wrong section. This one is the correct one, the one where you wanted to post is reserved to ROMs, kernels and other projects.
2. Modifying Official firmwares is a bad idea if you don't know how to do it. Seems also you downloaded the wrong firmware for your phone.
3. Flashing Combination firmware is useless since OEM Toggle is still enabled (you said you were rooted so I suppose yes). RMM flag is still stored in RPMB and doesn't gets resetted by flashing that factory fw, to set RMM back to Normal you need to flash the full stock firmware for your country and wait the classic 168h countdown.
4. The "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: x, BINARY: x" is caused because you're trying to flash a firmware with a lower rev. than the one installed in your phone. You need to flash a firmware with the same or higher rev (In this case, you need a XXU3/XXS3 or higher fw). Forget to flash a fw with a lower rev since RP fuse prevents you to do it (if you force install the bl via TWRP you get an hardbrick)
BlackMesa123 said:
1. You didn't posted in the wrong section. This one is the correct one, the one where you wanted to post is reserved to ROMs, kernels and other projects.
2. Modifying Official firmwares is a bad idea if you don't know how to do it. Seems also you downloaded the wrong firmware for your phone.
3. Flashing Combination firmware is useless since OEM Toggle is still enabled (you said you were rooted so I suppose yes). RMM flag is still stored in RPMB and doesn't gets resetted by flashing that factory fw, to set RMM back to Normal you need to flash the full stock firmware for your country and wait the classic 168h countdown.
4. The "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: x, BINARY: x" is caused because you're trying to flash a firmware with a lower rev. than the one installed in your phone. You need to flash a firmware with the same or higher rev (In this case, you need a XXU3/XXS3 or higher fw). Forget to flash a fw with a lower rev since RP fuse prevents you to do it (if you force install the bl via TWRP you get an hardbrick)
Click to expand...
Click to collapse
Thanks for responding currently I am on stock official firmware for my country and waiting 7 days,6 days left. I appreciate you all for responding. I want to ask one last thing, if I wipe internal storage through TWRP and delete the OS (blank download mode) can I not install a binary 2 boot loader?
DeadRatGames said:
Thanks for responding currently I am on stock official firmware for my country and waiting 7 days,6 days left. I appreciate you all for responding. I want to ask one last thing, if I wipe internal storage through TWRP and delete the OS (blank download mode) can I not install a binary 2 boot loader?
Click to expand...
Click to collapse
Already replied: no. First, there's no relation between bootloader and system (why should a wipe let you flash a lower rev bootloader lol). And as I already explained, Rollback Prevention fuse avoids you to do that: in Odin if you try to flash a lower rev bin it returns an error. If you try to force install it via TWRP, you'll hard brick your device and get a dead phone
BlackMesa123 said:
Already replied: no. First, there's no relation between bootloader and system (why should a wipe let you flash a lower rev bootloader lol). And as I already explained, Rollback Prevention fuse avoids you to do that: in Odin if you try to flash a lower rev bin it returns an error. If you try to force install it via TWRP, you'll hard brick your device and get a dead phone
Click to expand...
Click to collapse
When I say wipe I mean like complete wipe. Delete everything not just date like fully wipe internal storage. But anyway thanks.
Reformat system.
DeadRatGames said:
When I say wipe I mean like complete wipe. Delete everything not just date like fully wipe internal storage. But anyway thanks.
Click to expand...
Click to collapse
Don't take any risks or you will be ending up with a hard brick, like Mesa said!
Just do your time 6 days I think.
solamente said:
Don't take any risks or you will be ending up with a hard brick, like Mesa said!
Just do your time 6 days I think.
Click to expand...
Click to collapse
Ok. Thanks
ok so i have 2 of my a8's that are frp locked right now to the same frikken account and i can't remember what it is now. one is binary 2 and the other 3. both have no oem unlock in combination so i can't bypass... will this work for me? if so how do i know what my original firmware was? or do you mean just original carrier? also when waiting the 7 days where do i let them idle during the wait if i can't get passed google login during install?
both are sm-a530w both on oreo. binary 2 and 3
vibespredah said:
ok so i have 2 of my a8's that are frp locked right now to the same frikken account and i can't remember what it is now. one is binary 2 and the other 3. both have no oem unlock in combination so i can't bypass... will this work for me? if so how do i know what my original firmware was? or do you mean just original carrier? also when waiting the 7 days where do i let them idle during the wait if i can't get passed google login during install?
both are sm-a530w both on oreo. binary 2 and 3
Click to expand...
Click to collapse
same questions
vibespredah said:
ok so i have 2 of my a8's that are frp locked right now to the same frikken account and i can't remember what it is now. one is binary 2 and the other 3. both have no oem unlock in combination so i can't bypass... will this work for me? if so how do i know what my original firmware was? or do you mean just original carrier? also when waiting the 7 days where do i let them idle during the wait if i can't get passed google login during install?
both are sm-a530w both on oreo. binary 2 and 3
Click to expand...
Click to collapse
use this technic and your problem will be solved : youtube/watch?v=WmvjDEk6w4E
amazing. youre the man. cheers.
samalderon said:
use this technic and your problem will be solved : youtube/watch?v=WmvjDEk6w4E
Click to expand...
Click to collapse
omg youre the best. thanks so much.
Hi all,
I'm having a nightmare of a time with my Galaxy S7... For some unknown reason I decided to root my phone about 2 months ago using CF Auto Root.. worked great.. This morning, was having bad lag issues, so I restarted the phone.. as soon as the Samsung logo came up, I got a red message at the top of the screen saying "Custom Binary locked by FRP".. kind of freaked out and booted the phone into Recovery mode.. wiped Cache and wiped phone (to go back to factory setting I guess).. restarted... since then, I had no boot.. it did loop for a while as I was trying to charge the phone.. but that's it.
Now, the only way the phone will power on is if I plug it into my computer in Download Mode. I am trying to flash the ROM, custom or stock, but Odin fails almost as soon as it starts the sboot.bin and the phone screen shows "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY: 1".. Also, When I try to power on the phone, it HAS to be plugged in to my computer or charger cable and it just loops with a message at the top of the screen.
I can't do anything with this phone and cant find any solutions online... please help! :crying:
PM me for images of all screens please
I had the some problem while playing with my handset I switched off OEM unlock for some reason under developer option..
Next time i reset my handset it stuck on that warning
You need to download combination file, flash it with odin, then unlock developer mode, toggle OEM unlock, than flash back your current firmware, or if you have full twrp back up restore it
JayMor81 said:
Hi all,
I'm having a nightmare of a time with my Galaxy S7... For some unknown reason I decided to root my phone about 2 months ago using CF Auto Root.. worked great.. This morning, was having bad lag issues, so I restarted the phone.. as soon as the Samsung logo came up, I got a red message at the top of the screen saying "Custom Binary locked by FRP".. kind of freaked out and booted the phone into Recovery mode.. wiped Cache and wiped phone (to go back to factory setting I guess).. restarted... since then, I had no boot.. it did loop for a while as I was trying to charge the phone.. but that's it.
Now, the only way the phone will power on is if I plug it into my computer in Download Mode. I am trying to flash the ROM, custom or stock, but Odin fails almost as soon as it starts the sboot.bin and the phone screen shows "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY: 1".. Also, When I try to power on the phone, it HAS to be plugged in to my computer or charger cable and it just loops with a message at the top of the screen.
I can't do anything with this phone and cant find any solutions online... please help! :crying:
PM me for images of all screens please
Click to expand...
Click to collapse
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
cooltt said:
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
Click to expand...
Click to collapse
Dammit.. I tried to put as much detail as possible in there lol.. obviously I forgot some.. My mistake the Galaxy s7 that I am using is a Rogers Mobile (Canada) SM-G930W8. As for not signing out before modification, omfg, that makes perfect sense.. didn't even think of doing that before rooting.. I appreciate the help!! I will give this a go and see what outcome I get.. Thanks!
[/COLOR]That was nice of you to respond so helpfully, despite you having seen the scenario posted over and over.
cooltt said:
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
Click to expand...
Click to collapse
Can't make or receive calls
Please I need help my I rooted my S7 (flat) flashed the original OS with odin Installed Twrp flashed Andriod 9 and since then I can't make or receive calls wifi seems fine. Someone please come to my rescue:crying:
Cesilina said:
Please I need help my I rooted my S7 (flat) flashed the original OS with odin Installed Twrp flashed Andriod 9 and since then I can't make or receive calls wifi seems fine. Someone please come to my rescue:crying:
Click to expand...
Click to collapse
The S7 didn't receive Android 9 so the ROM is a custom one. Any issues with custom ROM's should be asked on the ROM thread itself where you got the ROM from. It's quite normal for custom ROM'S to have bugs.
You can try flashing the ROM (Android 9 Pie) again to see if it works. If not there are several different A9 ROM's to choose from.
cooltt said:
The S7 didn't receive Android 9 so the ROM is a custom one. Any issues with custom ROM's should be asked on the ROM thread itself where you got the ROM from. It's quite normal for custom ROM'S to have bugs.
You can try flashing the ROM (Android 9 Pie) again to see if it works. If not there are several different A9 ROM's to choose from.
Click to expand...
Click to collapse
Thank you for reply. I have tried atleast 4 different custom ROMs but to avail
Cesilina said:
Thank you for reply. I have tried atleast 4 different custom ROMs but to avail
Click to expand...
Click to collapse
Do you still have an imei number listed in settings?
Can't make or receive calls
cooltt said:
Do you still have an imei number listed in settings?
Click to expand...
Click to collapse
Yes please I still have an IMEI number