Database Info

[Q&A] [ROM][4.2.2] Sazy ROM 5.1

Q&A for [ROM][4.2.2] Sazy ROM 5.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.2.2] Sazy ROM 5.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

good rom! but the colors in the screen are a little bit dark why?

Tolez said:
good rom! but the colors in the screen are a little bit dark why?
Click to expand...
Click to collapse
Because you have enabled Adaptive Screen in Display, and because My ROM have some tweaks for saving battery.

beegee said:
Because you have enabled Adaptive Screen in Display, and because My ROM have some tweaks for saving battery.
Click to expand...
Click to collapse
ok thanks!

I have a stock 4.2 rooted ROM, before I flash it, I have to unroot it? because you said, it's rooted.
And thanks a lot, seemed really great ROM.

SmzAmir said:
I have a stock 4.2 rooted ROM, before I flash it, I have to unroot it? because you said, it's rooted.
And thanks a lot, seemed really great ROM.
Click to expand...
Click to collapse
I can;t install this if you don't have root so no, you don't need to unroot.

How to install from CM12
Hi, how to install from CM12? I flashed from TWRP 2.8.4.0 after a full wipe + data, and ended up with Samsung power-up logo. Reflashed CM12 again. Pozdrav!

Can someone please build/compile/port this rom to gt-i9105 as well please. I too want to run this awesome rom on my device. I feel quite jealous of you 9105p guys:- (

can i flash the latest build without wiping data if im using 6.0 build? thanks..

udate of rom
if i hve same rom already then how i update latest version,,? i mean flash with full wipe caches and devil or just simple flash the updated rom,,?
sorry my bad eng
---------- Post added at 06:28 PM ---------- Previous post was at 06:22 PM ----------
Najechi said:
can i flash the latest build without wiping data if im using 6.0 build? thanks..
Click to expand...
Click to collapse
same thing i want to know...?

hello sir,
plz give me reply..?

raicevic said:
Hi, how to install from CM12? I flashed from TWRP 2.8.4.0 after a full wipe + data, and ended up with Samsung power-up logo. Reflashed CM12 again. Pozdrav!
Click to expand...
Click to collapse
Wipe all.
Pozdrav i tebi!
---------- Post added at 08:40 AM ---------- Previous post was at 08:39 AM ----------
LightKnightX said:
Can someone please build/compile/port this rom to gt-i9105 as well please. I too want to run this awesome rom on my device. I feel quite jealous of you 9105p guys:- (
Click to expand...
Click to collapse
I will do something about that.
---------- Post added at 08:41 AM ---------- Previous post was at 08:40 AM ----------
Najechi said:
can i flash the latest build without wiping data if im using 6.0 build? thanks..
Click to expand...
Click to collapse
I always wipe data and everything, I also recommend that to everyone.

information need
when new sazy 7 relese...?
---------- Post added at 07:31 PM ---------- Previous post was at 07:06 PM ----------
i hve mobile signals problam ,,,,,,,, droped repeatedly

Signature not Recognized
Hello there,
I have a GT-I9105P
Android Version - 4.2.2
Baseband Version - I9106PXXUBNG2
Build Number - ***** . I9105PXXUBNG1
When I enter the "stock" recovery mode
Power botton + Volume Up + Home Botton
I wipe data
I choose update from sdcard, select the ROM file and then I get the message "signature verification fail"
Am I doing something wrong?

nomig said:
when new sazy 7 relese...?
---------- Post added at 07:31 PM ---------- Previous post was at 07:06 PM ----------
i hve mobile signals problam ,,,,,,,, droped repeatedly
Click to expand...
Click to collapse
No such issue found here.
Sazy 7 will be out soon.

Thank u sir

Plz make sazy 7 more lightweight and fast

Ask anything about Xaiomi Mi4i

Feel free and Ask anything about Xaiomi Mi4i! ??

I would like to ask u if u know the spelling of xiaomi

Ya I wrote it by mistake sorry

Rom win 10

I flashed cm13 from this http://forum.xda-developers.com/mi-4i/development/rom-cyanogenmod-13-t3277419
But when it comes to the Welcome screen, it gets stuck, and then reboots.
Pls help.

SACROS said:
I flashed cm13 from this http://forum.xda-developers.com/mi-4i/development/rom-cyanogenmod-13-t3277419
But when it comes to the Welcome screen, it gets stuck, and then reboots.
Pls help.
Click to expand...
Click to collapse
First you need to revert back to Miui version 6.6.10 or 5.6.11 or 5.7.13 before flashing...
---------- Post added at 07:16 PM ---------- Previous post was at 07:15 PM ----------
dipanjanpanja6 said:
Rom win 10
Click to expand...
Click to collapse
It's up to Xiaomi and Microsoft to decide the fate of Win 10 on our phones. Windows isn't an open source system like Android...

IMEI Partitions on Mi 4i
I would like to know which are the EFS partitions on Mi 4i, the id mmbcsomething19 and all.

I want to know if "Sunlight Display" works in custom ROMs. I'm on CM13.

No sunlight display does not works

Sacros again install mi rom and flash ur rom againto

haikalizz said:
First you need to revert back to Miui version 6.6.10 or 5.6.11 or 5.7.13 before flashing...
---------- Post added at 07:16 PM ---------- Previous post was at 07:15 PM ----------
Click to expand...
Click to collapse
Thanks It worked.
Earlier i flashed miui v7.0.3.0, but it didn't work, but after flashing v6.6.10, it worked nicely. Although i was getting some other problems too, but its now solved.
---------- Post added at 12:35 PM ---------- Previous post was at 12:21 PM ----------
vineetxd said:
Sacros again install mi rom and flash ur rom againto
Click to expand...
Click to collapse
Yeah, as @haikalizz wrote, i flashed miui v 6.6.10 and it worked, thanks

Now on Tap
How can I enable 'Now on Tap' on this rom cm13 ?
When i enable it in google app, it shows 'Unfortunately, Google App has stopped', and then after I hold the home button, it doesn't work.

SACROS said:
How can I enable 'Now on Tap' on this rom cm13 ?
When i enable it in google app, it shows 'Unfortunately, Google App has stopped', and then after I hold the home button, it doesn't work.
Click to expand...
Click to collapse
Choosing the right gapps package is important... Using latest 6.0 ARM64 gapps by OpenGapps works, try using that...

haikalizz said:
Choosing the right gapps package is important... Using latest 6.0 ARM64 gapps by OpenGapps works, try using that...
Click to expand...
Click to collapse
Thanks again!
It worked when i flashed open-gapps-arm64-6.0-mini. But i downloaded aroma and super versions, just to find out 1. aroma gets freeze on TWRP, 2. Mi4i doesn't have much system space for installing the super version. :silly:

[ROM][7.0.0_r14][UNOFFICIAL][5X] Bliss v7.0 for Nexus 5X [JOLLA-KERNEL]

http://forum.xda-developers.com/showpost.php?p=69929544&postcount=36

Wow, Bliss Nougat. Been using this one at old times when having LG G2. Gonna get to try this out. Thanks a million.

Amazing, thank you! Downloading now.

Wow Great i test that now
One question Substratum or theme engine ???? ( i hate substratum it's just my opinion )

Oh ****, been waiting for CM/based ROM for weeks! Im gonna try it immediately.

Sorry.. I have tested ROM.
Very bad news: Bliss derived from CM base to AOSP -->
No theme engine!

i have a internal manufacter message on boot but no problem after pass that
This Rom Work great but i'm not rooted ....

argraur said:
Sorry.. I have tested ROM.
Very bad news: Bliss derived from CM base to AOSP -->
No theme engine!
Click to expand...
Click to collapse
Not necessarily. Cm did not implement the theme engine for nougat yet. When it is available on cm probably bliss will get it to.

I will update Bliss cuz it gives internal error (with vendor) I will use 7.0.0_r12 (for bullhead)

@Renaf2 Sorry, no theme engine for any Nougat ROMs for this moment

@Renaf2 I will fix internal error message.
To enable root: Go to developer settings >> Root Access >> Apps and ADB

argraur said:
@Renaf2 I will fix internal error message.
Click to expand...
Click to collapse
Ok no problem after pass this error message everythink work well
argraur said:
@Renaf2 To enable root: Go to developer settings >> Root Access >> Apps and ADB
Click to expand...
Click to collapse
Oh ok I had been seeing in the developers options but I had to go too fast
i like bootanimation with N infinity
Thank you for your work

Renaf2 said:
Thank you for your work
Click to expand...
Click to collapse
And thank you Bliss Team because they made device sources and vendor!:highfive:

Weird. My ROM does not have Root option in Developer Options.

what vendor need to be flashed? i tried nbd90w but no luck looks very nice so far, thanks.

Wooo-hoooo
---------- Post added at 09:55 PM ---------- Previous post was at 09:25 PM ----------
Thanks for this:good:
Can hardly wait to switch to.
Question… any particular reason for jolla kernel? What about cf supersu?
---------- Post added at 10:09 PM ---------- Previous post was at 09:55 PM ----------
Its unofficial, what about official?

Where is root settings not in dev settings?

Antonioblee1 said:
Where is root settings not in dev settings?
Click to expand...
Click to collapse
Yeah known issue. Flash SuperSU zip!

jugoslavpetrovic said:
Wooo-hoooo
---------- Post added at 09:55 PM ---------- Previous post was at 09:25 PM ----------
Thanks for this:good:
Can hardly wait to switch to.
Question… any particular reason for jolla kernel? What about cf supersu?
---------- Post added at 10:09 PM ---------- Previous post was at 09:55 PM ----------
Its unofficial, what about official?
Click to expand...
Click to collapse
It prerelease of the official verson, cuz i dont use custom resources, only official Bliss sources! And Jolla Kernel was in Bliss bullhead manifest, i don't changed anything

argraur said:
It prerelease of the official verson, cuz i dont use custom resources, only official Bliss sources! And Jolla Kernel was in Bliss bullhead manifest, i don't changed anything
Click to expand...
Click to collapse
Thanks

[ROM]AEX-5.8-Unofficial Build[14/08/2018]

MODERATOR NOTICE| LINKS REMOVED | THREAD CLOSED
I will be maintaining AEX Unofficial Builds 8.x weekly...
This is my first project...
The ROMs will be non-treble...
Download(will be in android file host very soon)...
FLASHING:-
1. clean flash ( system, data, cache) recommended...
2. clean dirty(system and caches) for reflashing...

MODERATOR NOTICE| LINKS REMOVED | THREAD CLOSED

Hi bro

#kasturi_methi!

Karandon24 said:
Hi bro
Click to expand...
Click to collapse
hi... thanks for testing...
Azzkaran said:
#kasturi_methi!
Click to expand...
Click to collapse
Kasturi_methi????

Azzkaran said:
#kasturi_methi!
Click to expand...
Click to collapse
Long time no see bro:laugh:
---------- Post added at 06:03 PM ---------- Previous post was at 06:02 PM ----------
SKA97 said:
hi... thanks for testing...
Kasturi_methi????
Click to expand...
Click to collapse
He calls me like that

Karandon24 said:
Long time no see bro:laugh:
---------- Post added at 06:03 PM ---------- Previous post was at 06:02 PM ----------
He calls me like that
Click to expand...
Click to collapse
hehe just kidding
nycc to meet you again
---------- Post added at 02:38 AM ---------- Previous post was at 02:37 AM ----------
SKA97 said:
hi... thanks for testing...
Kasturi_methi????
Click to expand...
Click to collapse
He is my boii

Cool. Try to make thread a little bit better [emoji28]. Use AEX template

Ok.... I'll update soon I get new picks... Fixed apns... Next update will be sure rocking...

FsocietyInc said:
Cool. Try to make thread a little bit better [emoji28]. Use AEX template
Click to expand...
Click to collapse
Simple is elegant... Unofficial as well...
Only keeping what should a reader and tester know...

new build is up... check the changelogs.... mostly are there in my previous updates... this time with kernel, device and secuirity patch upstream...

Nice work bro

XiaomiDev said:
Nice work bro
Click to expand...
Click to collapse
:angel::angel::angel:
Thanks bro...

sorry for being inactive guys...
came with a new update... just dirty flash will work....
merged kernel upstream to 3.18.115 and device specific changes with new aex bootanimation(replacing dark pixel bootanimation)... thanks to @Jayant_Deshmukh...

What is the diferent to official ROM? And other question, the camera is not freez in te new copilation? Thanks for this wonderfull ROM!

Andres88z said:
What is the diferent to official ROM? And other question, the camera is not freez in te new copilation? Thanks for this wonderfull ROM!
Click to expand...
Click to collapse
One difference is, official ROM is treble build... But it doesn't

Andres88z said:
And other question, the camera is not freez in te new copilation?
Click to expand...
Click to collapse
default snap cam is okay... u can use gcam by urkill and config it... you'll get the best cam...

The ROM dont have app sms some one have any zip?
The ROM es very good

Andres88z said:
The ROM dont have app sms some one have any zip?
The ROM es very good
Click to expand...
Click to collapse
you can install android message from play store... more functionality than normal message app... working on it... i'm trying to fix torch toggle problem... will provide positive output by next update....

hope many of are using the latest build... the latest build is test build and will finally update the latest build by few hours after testing...
though test builds are also stable, i was testing with bringing messaging app and torch fixing from other sources(still not fixed) and many upstreams.... this coming build will be fixed from everything except torch (sorry guys for that ... ;( ).... else all are fixed...
thanks everyone for using the ROM...

[Touch don't work on Android Pie]

Does anyone know how to make the touch work again on Android Pie? (AOSP ROM)
My touch don't work, any file? any fix?
(Sorry for my bad english)

Are u using fake amoled screen ?
If yes then i'll try to give u some sort of fix.

Yes, i use fake amoled
but I want a file that is in .zip, because my TWRP is a bit old

https://drive.google.com/file/d/1-4c5rKatbcNG9kmFCHGAGhH4jmAO3i93/view?usp=drivesdk
Flash this kernel in any OneUI based custom ROM & then hard reset.
Try & report.

OK, thank you.
Does this kernel work on AOSP or Touchwiz? or does it work on both?

Jhevi Pereira said:
OK, thank you.
Does this kernel work on AOSP or Touchwiz? or does it work on both?
Click to expand...
Click to collapse
i haven't tested it because of some reason but a senior member of samsung sent this to me; he has tested it in many ROMs.
Try it in OneUi based ROMs first, if it worked their then it will work for sure on AOSP.

it did not work. After installing the kernel on a ONEUI, the mobile phone enters the boot logo, after which the device continues to reboot infinitely in this boot logo screen

jhevison said:
it did not work. After installing the kernel on a ONEUI, the mobile phone enters the boot logo, after which the device continues to reboot infinitely in this boot logo screen
Click to expand...
Click to collapse
Reset your device lastly.
He has tested it on AOSP.

But resetting the device could not give problem? (FRP LOCK)

jhevison said:
But resetting the device could not give problem? (FRP LOCK)
Click to expand...
Click to collapse
Search forums for that.

Bro, thank you. Work on OneUI AOSP.
Can you edit this kernel so that it works on Samsung TouchWiz Pie ONEUI?

jhevison said:
Bro, thank you. Work on OneUI AOSP.
Can you edit this kernel so that it works on Samsung TouchWiz Pie ONEUI?
Click to expand...
Click to collapse
On which OneUI ROM it worked ?

Pixel port.
But i wanted it to work on the touchwiz...

jhevison said:
Pixel port.
But i wanted it to work on the touchwiz...
Click to expand...
Click to collapse
Try it on RefinedPie A6 Port.

jhevison said:
Pixel port.
But i wanted it to work on the touchwiz...
Click to expand...
Click to collapse
Send pixel Port link & tell me about bugs.

Link: https://drive.google.com/uc?id=1Axvy59b5lXtLW5OpBpRpkMsYhg-dfYp4&export=download
Bug: Rom Lag, terrible performance.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Kuchayhilal said:
Try it on RefinedPie A6 Port.
Click to expand...
Click to collapse
Don't work bro, rebooting in logo bot.
I tried hard reset, but don't worked.
How i resolve?
---------- Post added at 04:24 PM ---------- Previous post was at 04:18 PM ----------
I find this kernels:
https://downloads.siddhantnaik.me/Oxygen Kernel/j7velte/AOSP/Oxygen-Kernel-j7velte-v4.0.138-AOSP.zip
Can you edit? (ONEUI kernel)

jhevison said:
Link: https://drive.google.com/uc?id=1Axvy59b5lXtLW5OpBpRpkMsYhg-dfYp4&export=download
Bug: Rom Lag, terrible performance.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Don't work bro, rebooting in logo bot.
I tried hard reset, but don't worked.
How i resolve?
---------- Post added at 04:24 PM ---------- Previous post was at 04:18 PM ----------
I find this kernels:
https://downloads.siddhantnaik.me/Oxygen Kernel/j7velte/AOSP/Oxygen-Kernel-j7velte-v4.0.138-AOSP.zip
Can you edit? (ONEUI kernel)
Click to expand...
Click to collapse
Flash latest oxygen kernel.
https://forum.xda-developers.com/ga...xynos-7870/kernel-oxygen-kernel-v1-0-t3782983
I heard OEM display check is disabled in oxygen kernel.
I'm not a kernel developer soo can't edit.

Bro, i fix it.

jhevison said:
Bro, i fix it.
Click to expand...
Click to collapse
How buddy ?

Kuchayhilal said:
How buddy ?
Click to expand...
Click to collapse
See my post