Database Info

[Completed] [Q] Android Reverse Tethering

A/I UsbThread1 : usbServerSocket : Waiting for the host to connect
W/I waiting android server connection ... 1
W/I Waiting for connection
W/I Sending busybox21
A/E UsbThread1.run() loop error. firstByte : 39 : WTOA_copyFile
A/E UsbThread1.run() loop error. lastCommand : 32 : WTOA_setGlobalVar
A/E UsbThread1.run() loop error. Exception type : class java.io.FileNotFoundException
A/E UsbThread1.run() loop error. Exception message : /storage/emulated/0/busybox21: open failed: EACCES (Permission denied)
A/E UsbThread1.run() loop error. Exception cause : libcore.io.ErrnoException: open failed: EACCES (Permission denied)
A/E UsbThread1.run() loop error. Exception string : java.io.FileNotFoundException: /storage/emulated/0/busybox21: open failed: EACCES (Permission denied)
A/E libcore.io.IoBridge.open(IoBridge.java:409)
Plz gv the solution on these

Hi, thank you for using XDA Assist. Can you explain what you are trying to do and what device you have?

vivo v9 stuck logo

hai i am new in xda... i would like to ask about my vivo v9 bootloop stuck at logo.
i have tried using qfil but it gives me sahara error...
i tried to factory format it gives me error...
i already send to repair shop but all cannot repair..
...wiping data....
E: failed to mount /data: invalid argument
formatting / data . . .
E: failed to mount /data: invalid argument
E: format_volume failed to mount /data, formatting instead
E: /sbin/mke2fs_static failed with status 1
E: format_volume: failed to make ext4 on /dev/block/bootdevice/by-name/userdata: invalid argument
data wipe failed.

A305G doesn't turn on.

Hi, i need your help.
My Samsung Galaxy A30 (A305G) doesn't turn on. It stays in bootloop and if I try to boot into Recovery, it doesn't work. The device has the bootloader locked and it also doesn't let me flash any stock / official firmware.
When I boot into recovery, some letters appear at the bottom of the screen, which say the following:
#no data on recovery_cause#
#Reboot Recovery Cause is [UNKNOWN]#
Support SINGLE-SKU
Block-Based OTA
Supported API: 3
E: failed to mount /efs (Invalid argument)
# MANUAL MODE v1.0.0 #
E: failed to mount /cache: Invalid argument
E: failed to mount /system_root: Invalid argument
E: failed to mount /cache: Invalid argument
E: failed to mount /cache: Invalid argument
E: failed to mount /cache: Invalid argument
': Can't mount /cache/recovery/last_locale
after that, it restarts, returns to recovery and repeats the same infinitely, a kind of bootloop but in recovery.

What did you do/flash to this before it came into this situation?

Question Various application lack permissions to save to storage

This includes the camera, chrome as well as the default file browser. I would say pretty much anything stock doesn't work. I am rooted on newest Android with Ketan ROM. While checking various logs I found some messages for this happening:
Some verbose logs from LSPosed:
Early in the logs:
java.lang.NullPointerException: Attempt to invoke interface method 'void android.os.IBinder.linkToDeath(android.os.IBinder$DeathRecipient,int)' on a null object reference
W/System No compatibility callbacks set!
Not sure for which app:
neither user nor current process has android.permission.cache_content
When camera crashes:
java.lang.RuntimeException: fail to create directory :/storage/emulated/0/DCIM
Some lines found in logcat:
01-24 20:54:59.638 8878 8878 E DBManager: query: mDBAdapter is null. please init first.
When browser fails to download file:
01-24 19:41:38.415 16215 16329 E cr_DownloadCollection: Unable to copy content to pending Uri.
01-24 19:41:38.415 16215 16329 E cr_DownloadCollection: java.io.FileNotFoundException: open failed: EACCES (Permission denied)
01-24 19:41:38.415 16215 16329 E cr_DownloadCollection: at android.database.DatabaseUtils.readExceptionWithFileNotFoundExceptionFromParcel(DatabaseUtils.java:151)
01-24 19:42:17.636 16215 16339 W cr_ContentUriUtils: Cannot open content uri: content://media/external/downloads/1000000307
01-24 19:42:17.636 16215 16339 W cr_ContentUriUtils: java.io.FileNotFoundException: open failed: EACCES (Permission denied)
Some other denials:
01-24 19:28:30.861 1313 1313 W ExtconUEventObserver: Unable to read /sys/devices/platform/10ab0000.displayport/extcon/extcon0/cable.1/name. This probably means the selinux policies need to be changed.
01-24 19:28:30.861 1313 1313 W ExtconUEventObserver: java.io.FileNotFoundException: /sys/class/extcon/extcon0/cable.1/name: open failed: EACCES (Permission denied)
Several of this:
01-24 19:29:10.933 4113 10177 D IPM : Failed to open stream '/sys/devices/system/cpu/cpu0/online' in mode 'WRITE': Permission denied
Any ideas please?

[TWRP][Unofficial] TWRP for Samsung Galaxy A90 5G [A908B/N/O]

I've decided to release my compiled build (early, little or lotta' buggy perhaps) of the Teamwin Recovery Project for the Samsung Galaxy A90 5G, build from source.
As always, flashing unsigned firmware(including this one) will permanently destroy KNOX, and irreversibly set the KNOX bit to 0x1.
(Let me know if the statement above is incorrect, but yeah, this will destroy
Currently, it is built on the 9.0 manifest targeting the A908BXXU5EVK3
So, aside from that, I'm unsure what it is completely compatible for, therefore, I would like to disclaim, that I cannot guarantee success nor the quality of the build that I have on my device, to reflect the same upon your device, and that if you decide to flash this, you are responsible for any potential damage that could theoretically be caused, you have been warned.
It works, Boots to recovery, and boots to system, and a magisk installed system, on my device, Android 12, A908BXXU5EVK3, A908B.
Installation:​
Tap 'Build Number' several times to enable Developer Options.
Exit both 'About Phone' and 'Software Information' Page until you are on the primary settings page.
'Developer Options' should now be available, enter this, and enable Developer Options if it is disabled.
Enable OEM Unlock.
Reboot to Download Mode
Power off the device, Hold both Volume up and down, insert data cable while holding volumes.
Long hold volume up for several seconds to be prompted if you wish to unlock the bootloader, confirm this. Do note that confirming the bootloader unlock will format your devices data, if you have any important files you wish to retain, return to system, transfer your files to another device beforehand.
If it is already unlocked, you do not need to do this step, as you will instead be prompted to lock the bootloader, deny this.
Acquire the TWRP tar file present through the link in this thread.
Acquire both the multidisabler(if required) and vbmeta.tar from Corsicanu downloads, and acquire an Odin executable.
Launch Odin, and insert vbmeta.tar in userdata, and the twrp tar file in AP.
Connect the Samsung A90 5G to the PC in 'Download Mode', flash.
The Device will automatically reboot after flash by default, during the reboot, Hold Volume up and down, while USB is connected.
Allow Modifications, Format Data, confirm by typing 'yes'; reboot to recovery.
Install Magisk(Optional), install multidisabler.
Reboot to system.
Currently, everything but MTP(Needs a kernel fix), and Decryption appears to work(As I'm also sure this may be a TWRP12 branch thing too); so you will need to sideload any zips, or utilise OTG Storage or SD.
All three have been tested, and provide some means to transfer files into the TWRP environment.
It may not be optimised, and may have slight issues, such as what's explained, and perhaps mounts that shouldn't be there, and mounts that aren't but should.
Download and test, at your own discretion. If you are unsure about installing this; you are not obliged to do so.
Download [TWRP A908B R3QXX]
This TWRP image is not patched with Magisk
Note: To the best of my knowledge; at least two Korean recipients have accessed the file; I have yet to hear anything from other regional models.
So my presumption would be that; perhaps it works, as success would normally yield lack of a follow-up than failure would.
But still, take caution until or unless it has been verified, flashing is still your own risk.

What appears to work. Or not work in my perspective;
Anything that has a tick. To some degree works, despite that it may require a Touch of optimisation, such as the clock.
For now, there is no further plan to assertively aim on improving this, right now.
Blocking checks
- [✓] Correct screen/recovery size
- [✓] Working Touch, screen
- [✓] Backup to internal/microSD
- [✓] Restore from internal/microSD
- [✓] reboot to system
- [✓] ADB
Medium checks
- [✓] update.zip sideload
- [✓] UI colors (red/blue inversions)
- [✓] Screen goes off and on
- [✓] F2FS/EXT4 Support, exFAT/NTFS where supported
- [✓ & ✘] all important partitions listed in mount/backup lists
- [✓] backup/restore to/from external (USB-OTG)
- [?] backup/restore to/from adb
- [✘] decrypt /data
- [✓] Correct date
Minor checks
- [✘] MTP export
- [✓] reboot to bootloader (BoardConfig overruled with Download Mode instead)
- [✓] reboot to recovery
- [✓] poweroff
- [✓] battery level
- [✓] temperature
- [✓] encrypted backups
- [✓] input devices via USB (USB-OTG)
- [✘] USB mass storage export
- [✓] set brightness
- [✓] vibrate
- [✓] screenshot
- [✓] partition SD card
MTP is still being investigated.

Reserved

Reserved

Thank you so much

jerico100894 said:
Thank you so much
Click to expand...
Click to collapse
You're welcome.
I wanted TWRP for my device and realised the best bet would be to sit down at my machine for a couple of days.
If you wouldn't mind, what region is your A90.
A908B/N/O?
If anything other than B. I can assume it would be sufficient for all three and can remove any safety measures in the next one.
That also, I'll let you know if and or when I fix MTP.
Note that ADB, sideload, SD and OTG work, just not MTP.
I would also invite that if any experienced TWRP builder/Kernel Compiler can fix MTP, they can of course apply for its official maintainership, and I could test it; if they don't own the r3q.
I've just been getting to the point of vmlinux build errors in mine, to date.
Once again, Jerico, you're welcome!

I'm using A908N. and Thank you so much!

Noneinformation01 said:
I'm using A908N. and Thank you so much!
Click to expand...
Click to collapse
Perfect, does it work correctly for you, booting etc? minus MTP, I am aware that has an issue, and I'm looking to get that resolved. I'll respond back here when it does.
As said, other means of transferring files are present;
ADB Sideload, OTG and SD; these should provide you means to flash and transfer to and from TWRP.
Glad to see another international device, if it works I'll update my thread to reflect regarding int devices.
Enjoy.
If there's any issues, feel free to post them.

I'm backing up my data.
I'll try it tomorrow in south korean time
I really wanted to root my device!

It's very nice!!! Thanks very much!
It boots only twrp.
How can I boot in my android?

Noneinformation01 said:
I'm backing up my data.
I'll try it tomorrow in korean time
I really wanted to root
Click to expand...
Click to collapse
I'll be using google translate.
You can only boot to TWRP and not to system?
What have you flashed?
Edit: Sorry, was meant to reply to your latest comment.
---
Google 번역을 사용하겠습니다.
시스템이 아닌 TWRP로만 부팅할 수 있습니까?
무엇을 깜박 했습니까?
편집: 죄송합니다. 귀하의 최근 댓글에 답글을 달기 위한 것입니다.

I didn't do the initial setup after unlocking the bootloader.
There is nothing else special.

PseudonymXIV said:
I've decided to release my compiled build (early, little or lotta' buggy perhaps) of the Teamwin Recovery Project for the Samsung Galaxy A90 5G, build from source.
As always, flashing unsigned firmware(including this one) will permanently destroy KNOX, and irreversibly set the KNOX bit to 0x1.
(Let me know if the statement above is incorrect, but yeah, this will destroy
Currently, it is built on the 9.0 manifest targeting the A908BXXU5EVK3
So, aside from that, I'm unsure what it is completely compatible for, therefore, I would like to disclaim, that I cannot guarantee success nor the quality of the build that I have on my device, to reflect the same upon your device, and that if you decide to flash this, you are responsible for any potential damage that could theoretically be caused, you have been warned.
It works, Boots to recovery, and boots to system, and a magisk installed system, on my device, Android 12, A908BXXU5EVK3, A908B.
Installation:​
Tap 'Build Number' several times to enable Developer Options.
Exit both 'About Phone' and 'Software Information' Page until you are on the primary settings page.
'Developer Options' should now be available, enter this, and enable Developer Options if it is disabled.
Enable OEM Unlock.
Reboot to Download Mode
Via, 'adb reboot download' in adb terminal; or
Power off the device, Hold both Volume up and down, insert data cable while holding volumes.
Long hold volume up for several seconds to be prompted if you wish to unlock the bootloader, confirm this. Do note that confirming the bootloader unlock will format your devices data, if you have any important files you wish to retain, return to system, transfer your files to another device beforehand.
If it is already unlocked, you do not need to do this step, as you will instead be prompted to lock the bootloader, deny this.
Acquire the TWRP tar file present through the link in this thread.
Acquire both the multidisabler(if required) and vbmeta.tar from Corsicanu downloads, and acquire an Odin executable.
Launch Odin, and insert vbmeta.tar in userdata, and the twrp tar file in AP.
Connect the Samsung A90 5G to the PC in 'Download Mode', flash.
The Device will automatically reboot after flash by default, during the reboot, Hold Volume up and down, while USB is connected.
Allow Modifications, Format Data, confirm by typing 'yes'; reboot to recovery.
Install Magisk(Optional), install multidisabler.
Reboot to system.
Currently, everything but MTP(Needs a kernel fix), and Decryption appears to work(As I'm also sure this may be a TWRP12 branch thing too); so you will need to sideload any zips, or utilise OTG Storage or SD.
All three have been tested, and provide some means to transfer files into the TWRP environment.
It may not be optimised, and may have slight issues, such as what's explained, and perhaps mounts that shouldn't be there, and mounts that aren't but should.
Download and test, at your own discretion. If you are unsure about installing this; you are not obliged to do so.
Download [TWRP A908B R3QXX]
This TWRP image is not patched with Magisk
Note: To the best of my knowledge; at least two Korean recipients have accessed the file; I have yet to hear anything from other regional models.
So my presumption would be that; perhaps it works, as success would normally yield lack of a follow-up than failure would.
But still, take caution until or unless it has been verified, flashing is still your own risk.
Click to expand...
Click to collapse
and 5-1 is not correct. it can't unlock the bootloader.
it goes to download mode without bootloader notification.

Noneinformation01 said:
I didn't do the initial setup after unlocking the bootloader.
There is nothing else special.
Click to expand...
Click to collapse
After flashing TWRP, essentially you'd format data, reboot to recovery, flash Magisk if you want it, and flash multidisabler, then you can boot to system.
----
TWRP를 플래싱한 후 기본적으로 데이터를 포맷하고 복구로 재부팅하고 원하는 경우 Magisk를 플래싱하고 멀티디스에이블러를 플래싱한 다음 시스템으로 부팅할 수 있습니다.

Noneinformation01 said:
and 5-1 is not correct. it can't unlock the bootloader.
it goes to download mode without bootloader notification.
Click to expand...
Click to collapse
Got an image of it? I have a thought on it.
----
그것의 이미지가 있습니까? 나는 그것에 대해 생각이 있습니다.

Ohh, I get what you mean. My apologies, 5-2 should be correct, and 5-1 would be an oversight on my part.
Takes you directly to, and skips it. Right?
I can't believe I missed that, normally, when I guide people on unlocking, I actually had in the past reminded people that it skips it.
So, surprisingly, I fell back on my own advice. I'll update the thread to reflect on that.
----
오, 무슨 말인지 알겠어. 죄송합니다. 5-2는 정확해야 하며 5-1은 제 실수입니다.
바로 이동하고 건너뜁니다. 오른쪽?
나는 일반적으로 사람들에게 잠금 해제를 안내할 때 그것을 놓쳤다는 것을 믿을 수 없습니다.
그래서 놀랍게도 저는 제 조언에 반했습니다. 이를 반영하기 위해 스레드를 업데이트하겠습니다.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When you enter to download mode Via, 'adb reboot download' in adb terminal, you can't following screen.
An Eng ver:
Org from: https://www.forecovery.com/wp-content/uploads/2017/07/samsung-download-mode.jpg

Noneinformation01 said:
View attachment 5864075
When you enter to download mode Via, 'adb reboot download' in adb terminal, you can't following screen.
An Eng ver:
View attachment 5864083
from: https://www.forecovery.com/wp-content/uploads/2017/07/samsung-download-mode.jpg
in the first picture, it has another option written "Hold Volume up key: Device unlock mode"
Click to expand...
Click to collapse
Oh yeah, I got you.
The suggestion I made takes you to Download Mode, bypassing the page to unlock the bootloader, an error on my part; guide has been changed, and now only advises to use the combination, to boot to the unlock page.
Thank you for that.
----
오 그래, 내가 잡았어.
내가 만든 제안은 다운로드 모드로 이동하여 페이지를 우회하여 부트로더의 잠금을 해제합니다. 내 오류입니다. 가이드가 변경되었으며 이제 잠금 해제 페이지로 부팅하기 위해 조합을 사용하도록 조언합니다.
감사합니다.

I instaled twrp and magisk succesfully! Thank you so much PseudonymXIV!

PseudonymXIV said:
Perfect, does it work correctly for you, booting etc? minus MTP, I am aware that has an issue, and I'm looking to get that resolved. I'll respond back here when it does.
As said, other means of transferring files are present;
ADB Sideload, OTG and SD; these should provide you means to flash and transfer to and from TWRP.
Glad to see another international device, if it works I'll update my thread to reflect regarding int devices.
Enjoy.
If there's any issues, feel free to post them.
Click to expand...
Click to collapse
I think that it dont have enough permissions.
when I boot my phone to recovery, it makes many permission denied error. (and some bad date error)
----Here is the first part of the recovery.log file.
Starting TWRP 3.7.0_9-0-ddaccbe7 on Fri Aug 31 09:48:08 2018
(pid 547)
TW_NO_REBOOT_BOOTLOADER := true
I:Lun file '/config/usb_gadget/g1/functions/mass_storage.0/lun.0/file' does not exist, USB storage mode disabled
TW_HAS_DOWNLOAD_MODE := true
TW_INCLUDE_CRYPTO := true
I:TW_BRIGHTNESS_PATH := /sys/class/backlight/panel0-backlight/brightness
I:Found brightness file at '/sys/class/backlight/panel0-backlight/brightness'
I:Got max brightness 365 from '/sys/class/backlight/panel0-backlight/max_brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 365
I:LANG: en
Starting the UI...
setting DRM_FORMAT_BGRA8888 and GGL_PIXEL_FORMAT_BGRA_8888
setting DRM_FORMAT_ARGB8888 and GGL_PIXEL_FORMAT_RGBA_8888
setting DRM_FORMAT_ARGB8888 and GGL_PIXEL_FORMAT_RGBA_8888
Using drm graphics.
I:TWFunc::Set_Brightness: Setting brightness control to 365
TW_SCREEN_BLANK_ON_BOOT := true
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 365
I:Loading package: splash (/twres/splash.xml)
I:Load XML directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/splash.xml' directly
I:Checking resolution...
I:Scaling theme width 1.000000x and height 1.250000x, offsets x: 0 y: 0 w: 0 h: 0
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page splash
I:Switching packages (splash)
=> Linking mtab
=> Processing /etc/recovery.fstab for SAR-detection
I:Reading /etc/recovery.fstab
I:Flag missing argument: display=
I:Done processing fstab files
I:SAR-DETECT: SAR System detected
=> Processing /etc/recovery.fstab
I:Reading /etc/recovery.fstab
I:Processing '/boot'
I:Processing '/recovery'
I:Processing '/'
I:Flag missing argument: display=
I:Processing '/data'
I:Processing '/cache'
I:Processing '/efs'
I:Created '/efs' folder.
I:Processing '/sec_efs'
I:Created '/sec_efs' folder.
I:Processing '/modem'
I:Processing '/mdm'
I:Processing '/dsp'
I:Processing '/vendor'
I:Created '/vendor' folder.
I:Processing '/product'
I:Created '/product' folder.
I:Processing '/misc'
I:Processing '/keydata'
I:Created '/keydata' folder.
I:Processing '/keyrefuge'
I:Created '/keyrefuge' folder.
I:Processing '/dtbo'
I:Processing '/vbmeta_samsung'
I:Processing '/vbmeta_system'
I:Processing '/external_sd'
I:Created '/external_sd' folder.
I:Processing '/usb-otg'
I:Created '/usb-otg' folder.
I:Done processing fstab files
I:Using automatic handling for /data/media emulated storage device.
I:Setting up '/data' as data/media emulated storage.
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/RFCM803822K'
I:Settings storage is '/data/media/0'
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
I:Decrypt adopted storage starting
I:PageManager::LoadFileToBuffer loading filename: '/data/system/storage.xml' directly
I:No /data/system/storage.xml for adopted storage
Updating partition details...
Error opening: '/data/vendor' (Permission denied)
Error opening: '/data/vendor_ce/0' (Permission denied)
Error opening: '/data/vendor_de/0' (Permission denied)
Error opening: '/data/app_fonts' (Permission denied)
Error opening: '/data/attribution' (Permission denied)
Error opening: '/data/anr' (Permission denied)
Error opening: '/data/tombstones' (Permission denied)
Error opening: '/data/misc' (Permission denied)
Error opening: '/data/apex/decompressed' (Permission denied)
Error opening: '/data/apex/ota_reserved' (Permission denied)
Error opening: '/data/app-staging' (Permission denied)
Error opening: '/data/overlays' (Permission denied)
Error opening: '/data/DownFilters' (Permission denied)
Error opening: '/data/local' (Permission denied)
Error opening: '/data/seams' (Permission denied)
Error opening: '/data/data' (Permission denied)
Error opening: '/data/app-private' (Permission denied)
Error opening: '/data/app-ephemeral' (Permission denied)
Error opening: '/data/app-asec' (Permission denied)
Error opening: '/data/app-lib' (Permission denied)
Error opening: '/data/app' (Permission denied)
Error opening: '/data/property' (Permission denied)
Error opening: '/data/fonts' (Permission denied)
Error opening: '/data/ota' (Permission denied)
Error opening: '/data/ota_package' (Permission denied)
Error opening: '/data/resource-cache' (Permission denied)
Error opening: '/data/drm' (Permission denied)
Error opening: '/data/mediadrm' (Permission denied)
Error opening: '/data/nfc' (Permission denied)
Error opening: '/data/backup' (Permission denied)
Error opening: '/data/ss' (Permission denied)
Error opening: '/data/tad' (Permission denied)
Error opening: '/data/system' (Permission denied)
Error opening: '/data/system_de/0' (Permission denied)
Error opening: '/data/system_ce/0' (Permission denied)
Error opening: '/data/misc_de/0' (Permission denied)
Error opening: '/data/misc_ce/0' (Permission denied)
Error opening: '/data/user_de/0' (Permission denied)
Error opening: '/data/rollback' (Permission denied)
Error opening: '/data/rollback-observer' (Permission denied)
Error opening: '/data/rollback-history' (Permission denied)
Error opening: '/data/incremental' (Permission denied)
Error opening: '/data/bootchart' (Permission denied)
Error opening: '/data/sblockchain' (Permission denied)
Error opening: '/data/adb' (Permission denied)
Error opening: '/data/knox' (Permission denied)
Error opening: '/data/enc_user' (Permission denied)
Error opening: '/data/snd' (Permission denied)
Error opening: '/data/semclipboard' (Permission denied)
Error opening: '/data/nfc_log' (Permission denied)
Error opening: '/data/semprivateshare' (Permission denied)
Error opening: '/data/log' (Permission denied)
Error opening: '/data/rdx_dump' (Permission denied)
Error opening: '/data/.fido' (Permission denied)
Error opening: '/data/fota' (Permission denied)
Error opening: '/data/server_configurable_flags' (Permission denied)
Error opening: '/data/sec' (Permission denied)
I:Data backup size is 1694MB, free: 63726MB.
I:cmd: /sbin/exfat-fuse -o big_writes,max_read=131072,max_write=131072 /dev/block/mmcblk0p1 /external_sd
ERROR: bad date 1980-00-00.
/sbin/exfat-fuse: bad date 1980-00-00
ERROR: bad date 1980-00-00.
/sbin/exfat-fuse: bad date 1980-00-00
ERROR: bad date 1980-00-00.
/sbin/exfat-fuse: bad date 1980-00-00
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Unmounting main partitions...