Booom
To get OTA updates you have to mount system partition read only. So you can't write in system and edit build.prop.
Enviado desde mi Mi A1 mediante Tapatalk
AridaneAM said:
To get OTA updates you have to mount system partition read only. So you can't write in system and edit build.prop.
Enviado desde mi Mi A1 mediante Tapatalk
Click to expand...
Click to collapse
Just edited thread. Thanks..
Please add a big warning, that OTA is broken with this method. Users who don't want to root choose it usually to keep OTA possible..
This is misleading.
By editing Build.prop files by mounting System Read / Write, you are basically acting as a Root user.
OTAs won't install.
mahfoozceecy said:
This is misleading.
By editing Build.prop files by mounting System Read / Write, you are basically acting as a Root user.
OTAs won't install.
Click to expand...
Click to collapse
I already edited the OP. I was in a hurry And its already mentioned here 2 times.
_mysiak_ said:
Please add a big warning, that OTA is broken with this method. Users who don't want to root choose it usually to keep OTA possible..
Click to expand...
Click to collapse
Sure my friend
Rajeev said:
I already edited the OP. I was in a hurry And its already mentioned here 2 times.
Click to expand...
Click to collapse
I meant, you should remove NO ROOT from the OP as this method is done by getting ROOT ACCESS in a different way.
Thanks for your guide
but i prefer to root device then latest magisk.apk then install magisk zip then camera2apk module then activate it then camera works
ramesh1686 said:
Thanks for your guide
but i prefer to root device then latest magisk.apk then install magisk zip then camera2apk module then activate it then camera works
Click to expand...
Click to collapse
Good
mahfoozceecy said:
I meant, you should remove NO ROOT from the OP as this method is done by getting ROOT ACCESS in a different way.
Click to expand...
Click to collapse
What he/she said.
So what to do when OTA comes? also, what about Google camera lag?
harshu0101 said:
So what to do when OTA comes? also, what about Google camera lag?
Click to expand...
Click to collapse
Since files are pushed into /system you won't be able to install OTA.
Only solution= flash firmware. You can flash older and get OTA or you can flash newer version (OTA included)
Thread closed at OP request
Related
So I've been getting lots of different questions about how to get this and that on android 7.0 nougat so to make it easier for everyone to find ill create this thread.
1. TWRP
Is twrp available for N? If so where can I find it?
http://forum.xda-developers.com/p9/how-to/twrp-3-0-2-0-n-t3506947
2. ROOT
Oh cool now I have twrp. So how can I root?
Download phh r275 version and flash
Download and install Material phh apk: Release post
Now you should be good to go. If any issues feel free to ask here or in phh official thread.
3. BUSYBOX
User friendly zip flash this and the below steps isn't needed!
Flashable zip (1.25.1) : https://mega.nz/#!zlRm3S4B!9rAtfi0wI8oFu6xjJITgF0dRwV21UPsxvZQZzMo6VXk
This one is a bit tricky. If you run root. But
Download jrummy's busybox on Gplay.
Select installation folder to /system/xbin or if u don't want to touch system folder use /sbin if available. U can replace jrummy''s busybox with stericsson version if you like it better. But you must have installed jrummys version first if you're booted into android. Else stericsson busybox might have issues installing. Or u can use zips which contains busybox Google busybox flashable.
4. VIPER
More user friendly if using this zip the below steps should only need se Linux mode changer!
Flashable zip: https://mega.nz/#!f8wlzIrB!vVCAv-xqWB8lOrcQTgIyFL0WS7MFsE9iFb08E1YKV2Y
Is quite a mess to get working. You need se Linux mode set to permissive. Flash guitarheroes version of v4a (2.5.0.5) once flashed you need to replace the audio effects in /vendor/etc/audio_effects else you'll get I/O driver installation failed. Copy the .so files to /system/lib and /system/lib64 and set correct permission. If you have wrong busybox message. Try different versions of busybox but I use latest from stericsson and it works great. Hope u get it working.
Oh and don't forget to allow sd storage access or you'll get driver I/O error as well. And se Linux changed to permissive use se Linux mode changer for it. It works great with phh!
5. MAGISK
As it seems to be now. Magisk won't work due to loop issues on boot. And mount seems to have losetup fail 1 on mounting a .img while booted.
6. Xposed
Not yet available. Be patient rovo needs time we can wait for him
7. comes soon.
More stuff.
Sent from my FRD-L09 using Tapatalk
how does your audio_effects.conf look like? i used one for aosp from "ARISE+Sound+Systems+Deuteronomy+2.3.3.zip" and got it working but don`t know if this is the right one for our device (huawei phones).
paratox said:
how does your audio_effects.conf look like? i used one for aosp from "ARISE+Sound+Systems+Deuteronomy+2.3.3.zip" and got it working but don`t know if this is the right one for our device (huawei phones).
Click to expand...
Click to collapse
It doesn't matter if it's aosp. Since it is for v4a it will work. As long as the audio effects works it doesn't matter.
Also I just finished my hopefully new nougat viper4android zip (i made my own for M with material designed version for my s5 neo) which worked fine until now.
Now it extract all files to its locations even to /vendor partition which all zips I used previously never had. I'll also update busybox zip which previous available is 1.24.2 which I'll bump up to 1.25.1.
I'll also going to upload my stuff to android file host. But that will be later
New files can be found https://mega.nz/#F!HlpzlaZL!wGNoJinVPZL0YiBcdbLlKA
Tapatalk is messing with the link
Sent from my FRD-L09 using Tapatalk
Updated op with latest busybox by stericsson. More user friendly now
Sent from my FRD-L09 using Tapatalk
LastStandingDroid said:
Updated op with latest busybox by stericsson. More user friendly now
Click to expand...
Click to collapse
Nice job mate!
dodgedroid said:
Nice job mate!
Click to expand...
Click to collapse
Easy to do when you got a zip for it just update the busybox executable and replace old one
Sent from my FRD-L09 using Tapatalk
Installation of ARISE
paratox said:
how does your audio_effects.conf look like? i used one for aosp from "ARISE+Sound+Systems+Deuteronomy+2.3.3.zip" and got it working but don`t know if this is the right one for our device (huawei phones).
Click to expand...
Click to collapse
How did you installed ARISE in Nougat?
I've been trying all day and I'll always end with an I/O or Busybox error. I tried a lot of things, like changing /vendor/etc/audio_effect.conf to audio_effect.conf.bak or installing Busybox into system/bin, but none of them seems to work for me.
I'm on B361 btw. And sorry for answering an old post
LastStandingDroid said:
Also I just finished my hopefully new nougat viper4android zip (i made my own for M with material designed version for my s5 neo) which worked fine until now.
Now it extract all files to its locations even to /vendor partition which all zips I used previously never had...
New files can be found https://mega.nz/#F!HlpzlaZL!wGNoJinVPZL0YiBcdbLlKA
Click to expand...
Click to collapse
Do you know, is your Viper4Android installer compatible with the following rooting/Busybox configuration:
- L09 c432/b378
- TWRP 3.1.0-0
- SuperSU-v2.79-201612051815-EMUI5.0.zip
- Rummy"s BusyBox (installed to /system/xbin)
as described by @hakaz and @Atarii in the post #102 and follow-ups:
https://forum.xda-developers.com/showpost.php?p=71588837&postcount=102
Also, should SELinux really be switched to Permissive mode for V4A to work on P9 with Nougat?
Thanks
zgfg said:
Do you know, is your Viper4Android installer compatible with the following rooting/Busybox configuration:
- L09 c432/b378
- TWRP 3.1.0-0
- SuperSU-v2.79-201612051815-EMUI5.0.zip
- Rummy"s BusyBox (installed to /system/xbin)
as described by @hakaz and @Atarii in the post #102 and follow-ups:
https://forum.xda-developers.com/showpost.php?p=71588837&postcount=102
Also, should SELinux really be switched to Permissive mode for V4A to work on P9 with Nougat?
Thanks
Click to expand...
Click to collapse
Yes it should be compatible and yes u need to switch to permissive mode else it'll be asking you to install over again, or simply not start to work
Sent from my CUBOT_MANITO using Tapatalk
LastStandingDroid said:
Yes it should be compatible and yes u need to switch to permissive mode else it'll be asking you to install over again, or simply not start to work
Click to expand...
Click to collapse
Yes, thanks, I have flashed your Viper.zip through TWRP and installed vViPERFX_v2.5.0.5.apk
I have also installed SELinuxModeChanger and set SELinux mode to stay Permissive over rebooting
Viper4Android works fine - thanks
LastStandingDroid said:
5. MAGISK
As it seems to be now. Magisk won't work due to loop issues on boot. And mount seems to have losetup fail 1 on mounting a .img while booted.
Click to expand...
Click to collapse
in my p9 lite emui 5.0 magisk is successfully installed !
it worked by flashing the modded boot.img by @HassanMirza01 and by setting selinux to permissive !!
big thanks to @Paolo83 who found this method
simo255 said:
in my p9 lite emui 5.0 magisk is successfully installed !
it worked by flashing the modded boot.img by @HassanMirza01 and by setting selinux to permissive !!
big thanks to @Paolo83 who found this method
Click to expand...
Click to collapse
Having Magisk, can you now also install Xposed?
PS: Please provide links to your resources and threads.
Btw, you have P9 Lite - does the method for Magisk apply also to (regular) P9 (single SIM)?
zgfg said:
Having Magisk, can you now also install Xposed?
PS: Please provide links to your resources and threads.
Btw, you have P9 Lite - does the method for Magisk apply also to (regular) P9 (single SIM)?
Click to expand...
Click to collapse
it workes because we have a modded boot.img created by @HassanMirza01, ask him what he did so as to he will do the same for p9 boot.img(or anyone else)
install selinux and set it to permissive, after that install magisk app via playstore and click on autoinstall
no xposed isnt working because there is no xposed for Nougat.
simo255 said:
it workes because we have a modded boot.img created by @HassanMirza01, ask him what he did so as to he will do the same for p9 boot.img(or anyone else)
install selinux and set it to permissive, after that install magisk app via playstore and click on autoinstall
no xposed isnt working because there is no xposed for Nougat.
Click to expand...
Click to collapse
Can you post the link to install his kernel?
Danymat said:
Can you post the link to install his kernel?
Click to expand...
Click to collapse
it won't work because it's a boot.img of p9 lite not for p9
simo255 said:
it won't work because it's a boot.img of p9 lite not for p9
Click to expand...
Click to collapse
So for p9 we don't have any solutions to install magisk?
Danymat said:
So for p9 we don't have any solutions to install magisk?
Click to expand...
Click to collapse
try to install the pre rooted boot.img (phh one) via this link https://forum.xda-developers.com/p9/development/root-pre-rooted-boot-img-p9-nougat-b378-t3574548
and follow the steps that i wrote above
simo255 said:
in my p9 lite emui 5.0 magisk is successfully installed !
it worked by flashing the modded boot.img by @HassanMirza01 and by setting selinux to permissive !!
big thanks to @Paolo83 who found this method
Click to expand...
Click to collapse
Is this using a Magisk.img in /data folder?
As said magisk can be made working since we had supersu working by chain I still doubt it uses a loop
Sent from my CUBOT_MANITO using Tapatalk
LastStandingDroid said:
Is this using a Magisk.img in /data folder?
As said magisk can be made working since we had supersu working by chain I still doubt it uses a loop
Click to expand...
Click to collapse
no there is no magisk.img folder, but there is a magisk folder which include those files (look at the screenshot
simo255 said:
no there is no magisk.img folder, but there is a magisk folder which include those files (look at the screenshot
Click to expand...
Click to collapse
Yes this is how Magisk is being made working
Sent from my CUBOT_MANITO using Tapatalk
Hello,
I rooted my device and installed AdAway,
Everytime I reboot I lose the blocking functionality.
How do I fix that?
Thanks
EDIT: https://forum.xda-developers.com/mate-9/help/ro-rooted-mate9-t3564231
bel3atar said:
Hello,
I rooted my device and installed AdAway,
Everytime I reboot I lose the blocking functionality.
How do I fix that?
Thanks
EDIT: https://forum.xda-developers.com/mate-9/help/ro-rooted-mate9-t3564231
Click to expand...
Click to collapse
If you used PHH to root, open the zip, open config.txt in a text editor, change "verity" to "noverity". Save and flash again.
You might need to flash back your stock boot image before flashing.
Edit: That link you posted there is full of misinformation.
Keeping system RO is best. It's not read-only/read-write that's causing it to roll back hosts.
I did that, but the flash fails with error 1.
I can't even install the original superuser-r310-beta.zip
bel3atar said:
I did that, but the flash fails with error 1.
I can't even install the original superuser-r310-beta.zip
Click to expand...
Click to collapse
Did you restore your stock boot image first?
Post your full build if you don't have it.
MHA/LON-LxxCxxxBxxx
ante0 said:
did you restore your stock boot image first?
Post your full build if you don't have it.
Mha/lon-lxxcxxxbxxx
Click to expand...
Click to collapse
mha-l29c432b182
bel3atar said:
mha-l29c432b182
Click to expand...
Click to collapse
https://mega.nz/#!VhlkmQbJ!sgq55_e6cf78VwxmKvUHD7f23aJnnWUwdOehft2Lpdk
Flash In TWRP to Boot partition, then flash your superuser zip with "noverity" in config.txt
ante0 said:
https://mega.nz/#!VhlkmQbJ!sgq55_e6cf78VwxmKvUHD7f23aJnnWUwdOehft2Lpdk
Flash In TWRP to Boot partition, then flash your superuser zip with "noverity" in config.txt
Click to expand...
Click to collapse
Solved, thank you =)
One more question: Will I still get OTA updates or will I have to apply them manually?
bel3atar said:
Solved, thank you =)
One more question: Will I still get OTA updates or will I have to apply them manually?
Click to expand...
Click to collapse
If you don't modify anything in /system, /product or /vendor you should still get OTA.
For example: installing Busybox modifies /system. Viper4Android modifies /vendor and /system.
If you need Busybox you should consider switching to Magiskv12. Its busybox is systemless (Doesn't modify anything).
And with Magisk you can use Android Pay and PokemonGO (and other apps that use SafetyNet).
MagiskHide is a little buggy on Mate 9, and other Huawei devices that use Nougat. If you enable it, fingerprint and pin will break after you reboot. If you just enable, run Android Pay, and disable after you will be fine.
You may, or may not, have noticed Xposed for SDK27 came out today I for one, am hyped. However, I cannot get it to install. The app gives a 404 error when I try to download though through there. I can download through the official DB, but that doesn't work either, gives me a 'failed to mount /system'. I'm assuming there's some perms issue, but i'd rather not mess with it. I'm on a Verizon Pixel 2.
Edit:Systemless is out if you're having issues installing. But you won't pass safety-net.
D3RP_ said:
You may, or may not, have noticed Xposed for SDK27 came out today I for one, am hyped. However, I cannot get it to install. The app gives a 404 error when I try to download though through there. I can download through the official DB, but that doesn't work either, gives me a 'failed to mount /system'. I'm assuming there's some perms issue, but i'd rather not mess with it. I'm on a Verizon Pixel 2.
Click to expand...
Click to collapse
The Xposed zip failed to flash in twrp for me too. I'm on a Google bought device.
Edit
I get the same 404 error when attempting to download and install through the Xposed installer app.
jascolli said:
The Xposed zip failed to flash in twrp for me too.
Click to expand...
Click to collapse
Which is weird because @wanam is a tester on a Pixel 2 xD
D3RP_ said:
Which is weird because @wanam is a tester on a Pixel 2 xD
Click to expand...
Click to collapse
Yeah i was running it for almost a week now on my Pixel2.
You cannot flash it through TWRP, the zip installer doesn't support A/B partition yet.
I used to install it through Xposed Installer App, if it doesn't show up the framework screen, check "Show outdated versions", copy the zip file to "/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework" and re-open the app.
wanam said:
Yeah i was running it for almost a week now on my Pixel2.
You cannot flash it through TWRP, the zip installer doesn't support A/B partition yet.
I used to install it through Xposed Installer App, if it doesn't show up the framework screen, check "Show outdated versions", copy the zip file to "/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework" and re-open the app.
Click to expand...
Click to collapse
Ahhhhh my man! Thank you!
wanam said:
Yeah i was running it for almost a week now on my Pixel2.
You cannot flash it through TWRP, the zip installer doesn't support A/B partition yet.
I used to install it through Xposed Installer App, if it doesn't show up the framework screen, check "Show outdated versions", copy the zip file to "/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework" and re-open the app.
Click to expand...
Click to collapse
Ok wait, it can't flash now because read only fs. To flash it through recovery I would need to restore stock recovery, right?
wanam said:
Yeah i was running it for almost a week now on my Pixel2.
You cannot flash it through TWRP, the zip installer doesn't support A/B partition yet.
I used to install it through Xposed Installer App, if it doesn't show up the framework screen, check "Show outdated versions", copy the zip file to "/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework" and re-open the app.
Click to expand...
Click to collapse
Thanks wanam, it worked perfectly!!
@wanam
Are there any modules that you have had success running on you pixel 2?
Darn. Framework shows that it is installed OK, but whenever I try to download a module the installer forces closed.
jascolli said:
Thanks wanam, it worked perfectly!!
Click to expand...
Click to collapse
wait what, how tf, did you just click install? Or did you install through recovery?
D3RP_ said:
wait what, how tf, did you just click install? Or did you install through recovery?
Click to expand...
Click to collapse
Download the Xposed zip, copy it and paste it here
"/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework"
In the Xposed installer app settings, check off "show outdated versions"
Then the zip that you posted will show up in the app to be installed.
Hope that makes sense...
Upon that, I'm faced with this issue:
jascolli said:
Download the Xposed zip, copy it and paste it here
"/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework"
In the Xposed installer app settings, check off "show outdated versions"
Then the zip that you posted will show up in the app to be installed.
Hope that makes sense...
Click to expand...
Click to collapse
No I got that far. I can't get it to install.
lps1014 said:
Upon that, I'm faced with this issue:
Click to expand...
Click to collapse
Same here pixel 2 xl magisk 15.2
lps1014 said:
Upon that, I'm faced with this issue:
Click to expand...
Click to collapse
It's a beta xD
wanam said:
Yeah i was running it for almost a week now on my Pixel2.
You cannot flash it through TWRP, the zip installer doesn't support A/B partition yet.
I used to install it through Xposed Installer App, if it doesn't show up the framework screen, check "Show outdated versions", copy the zip file to "/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework" and re-open the app.
Click to expand...
Click to collapse
Wanam
What's the trick getting /system/framework read only when installing from Xposed installer.
Thanks
Edit: those getting the read only error using a regular pixel 2 or all xl? This might help them figure it out.
I was able to get mine installed using the steps from wanam. Had to place the file in the framework folder. After that it installed fine
bigbean172018 said:
I was able to get mine installed using the steps from wanam. Had to place the file in the framework folder. After that it installed fine
Click to expand...
Click to collapse
Pixel 2 xl? If so why are some of us getting the read only error. Anything with magisk?
Pixel 2, I have magisk installed as well.
bigbean172018 said:
Pixel 2, I have magisk installed as well.
Click to expand...
Click to collapse
Would be interesting to know if anyone with 2 xl has been able to install it. It seems to be an XL issue since it has not been tested yet officially.
Like it was said it's a beta. Can't always expect it to work the first time.
Here is the download of the full rom for the Global North American Version:
http://rom.download.nubia.com/Europe&Asia/NX629/NX629J_Z69_EN_WPJ0O_V115.zip
Andd it doesnt fix any of the issues we are having with this phone.
Secretcow said:
Andd it doesnt fix any of the issues we are having with this phone.
Click to expand...
Click to collapse
Changelog?
Texan1 said:
Changelog?
Click to expand...
Click to collapse
Ask Nubia, I have no idea.
Can you give me a link or something on how to system update with a rooted device?? i already downloaded V.1.15 update i dont want my device to be stuck on a bootloop
P.S sitll new on using a rooted phone. and i use magisk and dont have TWRP
wilnore1985 said:
Can you give me a link or something on how to system update with a rooted device?? i already downloaded V.1.15 update i dont want my device to be stuck on a bootloop
P.S sitll new on using a rooted phone. and i use magisk and dont have TWRP
Click to expand...
Click to collapse
1) Open Magisk Manager. Do complete uninstall (press uninstall at the bottom)
2) Restart your phone.
3) Download the rom and put it in the root folder of your phone.
4) Go to Settings>System>System Update
5) Click the 3 dots at the top right, go to local update.
6) Update the phone using the rom you downloaded.
7) You'll have to patch the boot image with magisk again once you're done.
Secretcow said:
Here is the download of the full rom for the Global North American Version:
http://rom.download.nubia.com/Europe&Asia/NX629/NX629J_Z69_EN_WPJ0O_V115.zip
Click to expand...
Click to collapse
Do you have EN v2.09
If so please share it if possible
Secretcow said:
1) Open Magisk Manager. Do complete uninstall (press uninstall at the bottom)
2) Restart your phone.
3) Download the rom and put it in the root folder of your phone.
4) Go to Settings>System>System Update
5) Click the 3 dots at the top right, go to local update.
6) Update the phone using the rom you downloaded.
7) You'll have to patch the boot image with magisk again once you're done.
Click to expand...
Click to collapse
1. uninstalled Magisk.
2 restarted phone
3. downloaded the above ROM but i cant find my rooted folder. so my downloaded ROM.zip is currently located at internal storage/download
4. i went to go settings>system update
5. click on the local update. it didnt show any install option
6. how do you update the phone using the rom i downloaded???
7. the last part i still need a noob explanation on this one too
PS. sorry for the trouble guys, i came here to learn. and my root privilege is gone after i uninstalled the Magisk completely
wilnore1985 said:
1. uninstalled Magisk.
2 restarted phone
3. downloaded the above ROM but i cant find my rooted folder. so my downloaded ROM.zip is currently located at internal storage/download
4. i went to go settings>system update
5. click on the local update. it didnt show any install option
6. how do you update the phone using the rom i downloaded???
7. the last part i still need a noob explanation on this one too
PS. sorry for the trouble guys, i came here to learn. and my root privilege is gone after i uninstalled the Magisk completely
Click to expand...
Click to collapse
Dude here root folder means not the root permission. It means move the zip file from downloads and paste it in the internal storage. Don't add the zip file to any folder.
vimalrajan1988 said:
Dude here root folder means not the root permission. It means move the zip file from downloads and paste it in the internal storage. Don't add the zip file to any folder.
Click to expand...
Click to collapse
thanks for the clarification. it really helped. i think i know how number 7 works.
Thank you guys!
It came the regular way through the updater on my magic 3
Looks like the same update log as for the 2.09 Global Rom.
em902566 said:
Do you have EN v2.09
If so please share it if possible
Click to expand...
Click to collapse
Sorry, it's not on Nubia's server :/.
wilnore1985 said:
thanks for the clarification. it really helped. i think i know how number 7 works.
Thank you guys!
Click to expand...
Click to collapse
You are welcome
How on Earth have they not fixed the trigger issues with YouTube still?
Sent from my Note 9 using XDA Labs
Dear All,
I am using the Pixel 5 with Android 13 Build No: TQ1A.230105.001 and I rooted by flashed the image from Magisk app through ADB.
I checked and the phone said ROOTED and I cant grant access to apps but when I change font by any app, it isn't work and I copy in Root Explorer, I can't change the button "MOUNT R/W".
What can I do now? Should I re-root or flash again???
Thank you and waiting for your help.
Some new versions of android restrict it, and you have to do so through recovery.
Arealhooman said:
Some new versions of android restrict it, and you have to do so through recovery.
Click to expand...
Click to collapse
can I install TWRP on Andoird 13???
dpn025 said:
can I install TWRP on Andoird 13???
Click to expand...
Click to collapse
Yes. You Amy be able to set your system to rw through stock recovery, take a look if you can mount it.
Arealhooman said:
Yes. You Amy be able to set your system to rw through stock recovery, take a look if you can mount it.
Click to expand...
Click to collapse
please help me, I can't understand it.
do you have atock recovery? Or TWRP?
Arealhooman said:
do you have atock recovery? Or TWRP?
Click to expand...
Click to collapse
I'm still stock recovery.
Boot into stock recovery. Take a photo for me. If you can’, just tell me if there’s a option that starts with “mount” and what does it say?
From Android 10 and above, the system has changed to one Super Partition. This means that the system cannot be mounted as R/W as it's Read-only by nature.
There is a tool Universal SystemRW that supposedly converts the Read-only to R/W. I haven't tried it personally but it looks very promising.
swangjang said:
From Android 10 and above, the system has changed to one Super Partition. This means that the system cannot be mounted as R/W as it's Read-only by nature.
There is a tool Universal SystemRW that supposedly converts the Read-only to R/W. I haven't tried it personally but it looks very promising.
Click to expand...
Click to collapse
No, TWRP can mount too. And stock recovery for some devices
Root explorer is screwed up for some pixel ROMs including lineage so I don't know about stock. It will crash when trying to read many files, specifically text files you should normally be able to read or edit. It's working on the latest pixel experience ROM but crashed on two other roms I was trying
dpn025 said:
please help me, I can't understand it.
Click to expand...
Click to collapse
use material file manager. It's the only one that seems to be working right now