Related
Hey guys, before I say something. I have really searched for help on the forum, although I clearly need help.
So I was trying to ROM the new Revelation rom and ended up in a bootloop where phone is restarting at HTC screen. I've flashed ROMs a several times with no problem whatsoever, until now.
I have 4Ext recovery and can access it without problems. Tried installing other ROMs as Cm10 with no luck.
At the time is says in bootloader.
Information about device
**** UNLOCKED ****
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Click to expand...
Click to collapse
ADB-information (when typing "adb getvar all")
version: 0.5
version-bootloader: 1.27.0000
version-baseband: N/A
version-cpld: None
version-microp: None
version-main: 3.33.401.6
product: pyramid
platform: HBOOT-8260
modelid: PG5813000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 4012mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 617f0a98
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
----------------------------------------------.
I've tried installing the RUU 3.33.4, (which I believe is the right firmware for me, still nothing happens really, it loads in bootloader, nothing more).
Thank you very much for any help, I'd really appreciate it.
Links with similar problems
http://forum.xda-developers.com/showthread.php?t=1600324&highlight=bricked+sensation
http://forum.xda-developers.com/showthread.php?t=2271457
Folks, the surgery went well! I fixed it.
Was looking for every possible solution and found a guide! Finally got my lovely sensation back.
1. Put the firmware PG58IMG file in root (3.33.4 - since my fastboot told me so). Let it "flash".
2. Went inside 4Ext and removed the PG58IMG file.
2. Formated and wiped dalvik and cache.
3. With 4Ext smartflash turned on I flashed CM10.1 ROM.
4. Bootet back to bootloader in 4Ext, connected my device to adb and fastboot.
5. Copied the boot.img from the CM10.1 Rom-file and put it in the same folder as adb and fastboot.
6. Typed "fastboot flash boot boot.img", let it flash.
7. Reboot, phone back and feeling good!
Hope this helps for anyone who's stuck at HTC logo screen and has S-ON. Since the S-ON kind of prevented me from changing CID etc. I tried this, which worked successfully!
NickenA said:
Hey guys, before I say something. I have really searched for help on the forum, although I clearly need help.
So I was trying to ROM the new Revelation rom and ended up in a bootloop where phone is restarting at HTC screen. I've flashed ROMs a several times with no problem whatsoever, until now.
I have 4Ext recovery and can access it without problems. Tried installing other ROMs as Cm10 with no luck.
At the time is says in bootloader.
Information about device
ADB-information (when typing "adb getvar all")
----------------------------------------------.
I've tried installing the RUU 3.33.4, (which I believe is the right firmware for me, still nothing happens really, it loads in bootloader, nothing more).
Thank you very much for any help, I'd really appreciate it.
Links with similar problems
http://forum.xda-developers.com/showthread.php?t=1600324&highlight=bricked+sensation
http://forum.xda-developers.com/showthread.php?t=2271457
Click to expand...
Click to collapse
Even I had the same problem today.
http://forum.xda-developers.com/showthread.php?t=2349395
In short..the culprit was the boot.img.
It was not being flashed even after enabling smartflash in 4ext recovery.
So basically what I did was exract boot.img from the AndroidRevolution rom and flashed it via fastboot(fastboot flash boot boot.img).
And it worked!!
Try this and report.
@NickenA
You should probably remove your imei and serial number from OP.
Sent from my Ouya
You can still flash Revelation but since you are S-ON you may need to flash the boot.img separately like you posted in your solution. So, extract the boot.img from the ROM, flash the ROM then push boot.img to your phone afterwards, and before you know it you will be enjoying the smoothest Sensation possible!
I've been having the same problem, once again, after trying to flash Revelation (and yeah, I'm also 1.27 with S-ON) so this looks like it's definitely the common denominator. Even with SmartFlash in 4EXT, the boot.img doesn't seem to flash for any ROM after attempting to flash revelation - I even tried 3 others that I know used to work just fine. I was starting to get afraid that I may have softbricked my phone, but I'll go ahead and try flashing boot.img manually. Thanks
EDIT: Worked like a charm - only needed to do fastboot flash boot boot.img
The other method with the PG58IMG is going a little overboard, IMO
Jus flash the proper boot.img
NickenA said:
Folks, the surgery went well! I fixed it.
Was looking for every possible solution and found a guide! Finally got my lovely sensation back.
1. Put the firmware PG58IMG file in root (3.33.4 - since my fastboot told me so). Let it "flash".
2. Went inside 4Ext and removed the PG58IMG file.
2. Formated and wiped dalvik and cache.
3. With 4Ext smartflash turned on I flashed CM10.1 ROM.
4. Bootet back to bootloader in 4Ext, connected my device to adb and fastboot.
5. Copied the boot.img from the CM10.1 Rom-file and put it in the same folder as adb and fastboot.
6. Typed "fastboot flash boot boot.img", let it flash.
7. Reboot, phone back and feeling good!
Hope this helps for anyone who's stuck at HTC logo screen and has S-ON. Since the S-ON kind of prevented me from changing CID etc. I tried this, which worked successfully!
Click to expand...
Click to collapse
No need to wipe/flash anything.. Most boot-loops with S-ON occur with wrong boot.img. Just use fastboot flash boot boot.img and you should be good to go.
I have the same problem... :/ (Not sure if I have to start a new thread)
I have flashed the Revelation ROM and after rebooting I'm stuck at HTC splash screen. Now after restoring my backup of my previously used CM10.1 ROM I'm stuck on splash screen too. I even tried to flash a clean CM10.1 ROM, but same problem
I'm S-OFF using hboot 1.29 and latest firmware.
BobQuentok said:
I have the same problem... :/ (Not sure if I have to start a new thread)
I have flashed the Revelation ROM and after rebooting I'm stuck at HTC splash screen. Now after restoring my backup of my previously used CM10.1 ROM I'm stuck on splash screen too. I even tried to flash a clean CM10.1 ROM, but same problem
I'm S-OFF using hboot 1.29 and latest firmware.
Click to expand...
Click to collapse
flash the boot.img of the rom manually
from cmd window the command is fastboot flash boot boot.img
rzr86 said:
flash the boot.img of the rom manually
from cmd window use the dommand is fastboot flash boot boot.img
Click to expand...
Click to collapse
I tried that as well (have I to do this even if I am S-OFF?), but still bootloop.
BobQuentok said:
I tried that as well (have I to do this even if I am S-OFF?), but still bootloop.
Click to expand...
Click to collapse
do a full wipe first and then reflash the rom
what recovery are you using?
rzr86 said:
do a full wipe first and then reflash the rom
what recovery are you using?
Click to expand...
Click to collapse
Okay, I'll do full a full wipe, a reflash and then fastboot boot.img (again).
I use 4ext. Thanks for trying to help me
BobQuentok said:
I tried that as well (have I to do this even if I am S-OFF?), but still bootloop.
Click to expand...
Click to collapse
No need for this if you're s off. Do a full wipe except sdcard and reflash.
JAM THAT THANKS BUTTON.
Happy to help.
Far_SighT said:
No need for this if you're s off. Do a full wipe except sdcard and reflash.
JAM THAT THANKS BUTTON.
Happy to help.
Click to expand...
Click to collapse
It's really strange, I have never had that problem. I rewiped (except SD) and reflashed the ROMs many times, but still bootloop.
Even restoring my backup of my CM10.1 doesn't work :/
And fastboot doesn't work, because my bootloader is *** LOCKED ***
BobQuentok said:
It's really strange, I have never had that problem. I rewiped (except SD) and reflashed the ROMs many times, but still bootloop.
Even restoring my backup of my CM10.1 doesn't work :/
And fastboot doesn't work, because my bootloader is *** LOCKED ***
Click to expand...
Click to collapse
Try using a modded hboot. Also, post your bootloader details.
JAM THAT THANKS BUTTON.
Happy to help.
BobQuentok said:
It's really strange, I have never had that problem. I rewiped (except SD) and reflashed the ROMs many times, but still bootloop.
Even restoring my backup of my CM10.1 doesn't work :/
And fastboot doesn't work, because my bootloader is *** LOCKED ***
Click to expand...
Click to collapse
with locked bootloader you are restricted to fastboot commands
what to do is flash 3.33 universal from this thread
http://forum.xda-developers.com/showthread.php?t=1459767
it will give you also a patched hboot which is unlocked
follow the instructions carefully
and before flashing check md5 sums(important)
after that try with the command again
Far_SighT said:
Try using a modded hboot. Also, post your bootloader details.
JAM THAT THANKS BUTTON.
Happy to help.
Click to expand...
Click to collapse
Sorry, totally forgot about that
*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
RADIO-11.24A.3504.31_M
OpenADSP-V05.6.0.2226.00.0418
eMMC-boot
Mar 2 2012, 18:14:34
Click to expand...
Click to collapse
I'm running latest hboot and FW from that thread: http://forum.xda-developers.com/showthread.php?t=1459767
Thanks for your help
BobQuentok said:
Sorry, totally forgot about that
I'm running latest hboot and FW from that thread: http://forum.xda-developers.com/showthread.php?t=1459767
Thanks for your help
Click to expand...
Click to collapse
are you sure fro that thread?
because you have the official hboot version
also it is locked
the patched hboot will say at the top firmware 3.33
rzr86 said:
are you sure fro that thread?
because you have the official hboot version
also it is locked
the patched hboot will say at the top firmware 3.33
Click to expand...
Click to collapse
Yeah, I'm pretty sure since this is my only source for FW/hboot files.
I'm reflashing 3.33 universal now. Which hboot should I flash? (since the one in the thread is, I guess, only an 1.27 > 1.29 update package)
BobQuentok said:
Yeah, I'm pretty sure since this is my only source for FW/hboot files.
I'm reflashing 3.33 universal now. Which hboot should I flash? (since the one in the thread is, I guess, only an 1.27 > 1.29 update package)
Click to expand...
Click to collapse
3.33 universal will take care too of the patched hboot
probably you will have 1.27.1111
Hi,
I have an HTC ONE SV and i tried to flash a stock rom but i haven't any experience with it, and now my device is stucked in boot loading screen.
For what i understand i can install a new stock rom with fastboot because also my recovery mode is corrupted and factory reset as well because when i try to enter it remains in "Loading Recovery Mode boot screen". Could someone help me with a fix and a stock rom for:
K2_UL XC SHIP S-OFF RH
CID - 11111111
HBOOT- 2.19.0000
RADIO - 1.15.49a.00.07
Also i have S-Off as you can see from above and Bootloader Unlocked.
Thanks,
I hope that someone can help me.
What stock Rom did you chose?
Try to flash the RUU
Old.Splatterhand posted the correct link.
Gesendet von meinem HTC One SV mit Tapatalk
Fabian2103 said:
What stock Rom did you chose?
Try to flash the RUU
Click to expand...
Click to collapse
Not so fast, before you tell people to use a RUU, tell them also, how to use. Otherwise people could be lost.
mrrrdude said:
Hi,
I have an HTC ONE SV and i tried to flash a stock rom but i haven't any experience with it, and now my device is stucked in boot loading screen.
For what i understand i can install a new stock rom with fastboot because also my recovery mode is corrupted and factory reset as well because when i try to enter it remains in "Loading Recovery Mode boot screen". Could someone help me with a fix and a stock rom for:
K2_UL XC SHIP S-OFF RH
CID - 11111111
HBOOT- 2.19.0000
RADIO - 1.15.49a.00.07
Also i have S-Off as you can see from above and Bootloader Unlocked.
Thanks,
I hope that someone can help me.
Click to expand...
Click to collapse
I think it could be solved without RUU.
It seems (because of your hboot), you had already the update to Android 4.2.2? Can you tell us which software you were running? Or if you are using an european k2ul? Or any other information could be important.
Please try to use/flash this recovery for flashing a rom:
http://forum.xda-developers.com/showthread.php?p=41456540#post41456540
You have to flash with fastboot. It is made to work also on your hboot.
old.splatterhand said:
Not so fast, before you tell people to use a RUU, tell them also, how to use. Otherwise people could be lost.
I think it could be solved without RUU.
It seems (because of your hboot), you had already the update to Android 4.2.2? Can you tell us which software you were running? Or if you are using an european k2ul? Or any other information could be important.
Please try to use/flash this recovery for flashing a rom:
http://forum.xda-developers.com/showthread.php?p=41456540#post41456540
You have to flash with fastboot. It is made to work also on your hboot.
Click to expand...
Click to collapse
I don't really know if i had the update to Anroid 4.2.2 in Fast Boot Menu it sais OS-3.03.401.1? does that help you? and i think it's an european k2ul. After i flash this recovery image? what do i do next? i mean i want to revert the phone to stock but like i said the Recovery menu dosn't load is there any way to flash the recovery image and then install a stock rom through flasboot commands? i have found this post http://forum.xda-developers.com/showthread.php?t=2277112 and it sais that it's possible but i didn't have the recovery image, now i do but i'm still missing a stock rom that would work with my device.
You had an older recovery, which don't work with your hboot.
Flash the recovery i have linked for you with fastboot, then you should be able to enter recovery.
From recovery you can flash the k2ul_4.2.2_3.11.401.1_stock_odexed_v3.zip from here. It's a stock rom, with the same software number as you have had.
old.splatterhand said:
You had an older recovery, which don't work with your hboot.
Flash the recovery i have linked for you with fastboot, then you should be able to enter recovery.
From recovery you can flash the k2ul_4.2.2_3.11.401.1_stock_odexed_v3.zip from here. It's a stock rom, with the same software number as you have had.
Click to expand...
Click to collapse
Thank you, i will try this out and i will let you know if i make any progress
mrrrdude said:
Thank you, i will try this out and i will let you know if i make any progress
Click to expand...
Click to collapse
old.splatterhand said:
You had an older recovery, which don't work with your hboot.
Flash the recovery i have linked for you with fastboot, then you should be able to enter recovery.
From recovery you can flash the k2ul_4.2.2_3.11.401.1_stock_odexed_v3.zip from here. It's a stock rom, with the same software number as you have had.
Click to expand...
Click to collapse
Hi,
The phone now boots into recovery so i'm on the right track thanks to you, but i don't know how to flash the stock rom? what do i need to do? i put the stock on a sd card and plug it in through an external cable and a card reader but i don't seem to find where is the file? Do i need to flash the boot.img from the zip file too? or rename the zip file somehow in the sd card?
You have to flash it from recovery.
First go (in recovery) to "Wipe"-> "Advanced Wipe" and wipe everything but sd card and internal sd card.
Put the rom on your sd card, choose "Install" and navigate to the k2ul_4.2.2_3.11.401.1_stock_odexed_v3.zip.
Choose it and confirm with"Swipe to flash".
As you are S-off, you usually don't need to flash boot.img afterwards.
When flashing is done, Reboot.
Wait some minutes, first boot takes some time.
old.splatterhand said:
You have to flash it from recovery.
First go (in recovery) to "Wipe"-> "Advanced Wipe" and wipe everything but sd card and internal sd card.
Put the rom on your sd card, choose "Install" and navigate to the k2ul_4.2.2_3.11.401.1_stock_odexed_v3.zip.
Choose it and confirm with"Swipe to flash".
As you are S-off, you usually don't need to flash boot.img afterwards.
When flashing is done, Reboot.
Wait some minutes, first boot takes some time.
Click to expand...
Click to collapse
It fails to wipe with this error: E:Unable to mount internal storage. do i need to place the sd card inside the phone?
Hmmm, strange. Yes, put your sd card into your phone. If the rom is there, you can't find it, if its not in the phone.
Go on and try to flash.
old.splatterhand said:
Hmmm, strange. Yes, put your sd card into your phone. If the rom is there, you can't find it, if its not in the phone.
Go on and try to flash.
Click to expand...
Click to collapse
I found my rom on the sd card but after a few seconds the installing fails because of the same error "unable to mount internal storage" is there a way to flash this rom through fastboot?
No.
Seems, something got corrupted on your device.
Connect your phone with fastboot and type into the cmd:
Code:
fastboot getvar all
Put the output here (except your IMEI & Serial number)
old.splatterhand said:
No.
Seems, something got corrupted on your device.
Connect your phone with fastboot and type into the cmd:
Code:
fastboot getvar all
Put the output here (except your IMEI & Serial number)
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 2.19.0000
version-baseband: 1.15.40a.00.07
version-cpld: None
version-microp: None
version-main:
version-misc: XC SHIP S-OFF
meid:
product: k2_ul
platform: HBOOT-8930
modelid: PL8010000
cidnum: 11111111
battery-status: good
battery-voltage: 3909mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-0049fc265e
hbootpreupdate: 11
gencheckpt: 0
Ok, i see what i wanted to see.
Because the rom will not flash, you should really try to flash the RUU.
To do that, you need to downgrade your hboot.
Please read and follow this guide, to downgrade hboot and flash the RUU afterwards.
old.splatterhand said:
Ok, i see what i wanted to see.
Because the rom will not flash, you should really try to flash the RUU.
To do that, you need to downgrade your hboot.
Please read and follow this guide, to downgrade hboot and flash the RUU afterwards.
Click to expand...
Click to collapse
Do i really need to change the supercid to downgrade the hboot as mentioned in the tutorials? because i can't do that because my device is only recognize in fastboot. when i hit the command adb devices my serial number is not shown. but in fastboot device is. or if i use command like su in adb i get an error message like this "error: device not found"
mrrrdude said:
Do i really need to change the supercid to downgrade the hboot as mentioned in the tutorials?
Click to expand...
Click to collapse
Supercid is fine, no need to change it.
old.splatterhand said:
Supercid is fine, no need to change it.
Click to expand...
Click to collapse
It WORKED LIKE A CHARM! THANK YOU! you are a real life saver! I could not have done it without you, thanks allot!
mrrrdude said:
It WORKED LIKE A CHARM! THANK YOU! you are a real life saver! I could not have done it without you, thanks allot!
Click to expand...
Click to collapse
Nice, so have fun with your new born device :laugh:
old.splatterhand said:
Nice, so have fun with your new born device :laugh:
Click to expand...
Click to collapse
Thank you, i will definitly
Hi everyone. I had maximun HD rom installed and working for several months but, one day my htc one s stars a infinite boot loop. I can enter into Hboot mode but when I try enter into recovery, do clear storage or do a factory reset it just restarts as it does when it try to boot the system.
I tried reflashing the recovery but it had no effect, also tried to reflash the boot.img but the same.
I'm stuck .
firmware info:
version: 0.5
version-bootloader: 2.16.0000
version-baseband: 1.20.50.05.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: HT24FW403470
imei: 359902041309034
product: vle
platform: HBOOT-8960
modelid: PJ4011000
cidnum: T-MOB010
battery-status: low
battery-voltage: 3283mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4958290506
hbootpreupdate: 11
gencheckpt: 0
Thanks for your help n_n
realityrd said:
Hi everyone. I had maximun HD rom installed and working for several months but, one day my htc one s stars a infinite boot loop. I can enter into Hboot mode but when I try enter into recovery, do clear storage or do a factory reset it just restarts as it does when it try to boot the system.
I tried reflashing the recovery but it had no effect, also tried to reflash the boot.img but the same.
I'm stuck .
Thanks for your help n_n
Click to expand...
Click to collapse
May you post your firmware infos? HBOOT version, CID, radio...
LS.xD said:
May you post your firmware infos? HBOOT version, CID, radio...
Click to expand...
Click to collapse
Thanks, I updated the post.
realityrd said:
Thanks, I updated the post.
Click to expand...
Click to collapse
You can flash this firmware update to fix your phone. It will set it back to HBOOT 2.15 and stock radio. Then you can run the stock RUU or flash a new custom recovery + rom
firmware.zip for T-MOB010--> LINK
Here is how to flash it --> GUIDE
You will need to charge your battery first as it has to be at least 30% charged. I'd suggest to charge it to 70% just to be safe.
Sounds like you got the same issue I got last year and only running a RUU fixed it.
LS.xD said:
You can flash this firmware update to fix your phone. It will set it back to HBOOT 2.15 and stock radio. Then you can run the stock RUU or flash a new custom recovery + rom
firmware.zip for T-MOB010--> LINK
Here is how to flash it --> GUIDE
You will need to charge your battery first as it has to be at least 30% charged. I'd suggest to charge it to 70% just to be safe.
Click to expand...
Click to collapse
I'll try as soon as I charge the phone, I'm having difficulties doing that. Thanks n_n
LS.xD said:
You can flash this firmware update to fix your phone. It will set it back to HBOOT 2.15 and stock radio. Then you can run the stock RUU or flash a new custom recovery + rom
firmware.zip for T-MOB010--> LINK
Here is how to flash it --> GUIDE
You will need to charge your battery first as it has to be at least 30% charged. I'd suggest to charge it to 70% just to be safe.
Click to expand...
Click to collapse
I have flashed the the firmware but I'm still unable to go into recovery mode :crying:
realityrd said:
I have flashed the the firmware but I'm still unable to go into recovery mode :crying:
Click to expand...
Click to collapse
I assume you can get into the boot loader. Maybe lock the boot loader and run the RUU to get back to stock. Someone else chime in if you have better suggestions please.
realityrd said:
I have flashed the the firmware but I'm still unable to go into recovery mode :crying:
Click to expand...
Click to collapse
Did you perform "factory reset / clear storage" in bootloader mode before you installed the custom recovery again?
808phone said:
I assume you can get into the boot loader. Maybe lock the boot loader and run the RUU to get back to stock. Someone else chime in if you have better suggestions please.
Click to expand...
Click to collapse
Already did, I had the very same thing happen to me.
LS.xD said:
Did you perform "factory reset / clear storage" in bootloader mode before you installed the custom recovery again?
Click to expand...
Click to collapse
It doesn't matter what you do only RUU will fix this.
LS.xD said:
Did you perform "factory reset / clear storage" in bootloader mode before you installed the custom recovery again?
Click to expand...
Click to collapse
nope, I just followed the guide
Darknites said:
Already did, I had the very same thing happen to me.
It doesn't matter what you do only RUU will fix this.
Click to expand...
Click to collapse
How i can know what is my correct RUU file. I have S-off (does It matter?)
realityrd said:
How i can know what is my correct RUU file. I have S-off (does It matter?)
Click to expand...
Click to collapse
OK, now I could be wrong but you being S-OFF means you can install any RUU. But obviously I would install one that matches the country/carrier and processor.
realityrd said:
How i can know what is my correct RUU file. I have S-off (does It matter?)
Click to expand...
Click to collapse
Any will do since you got S-Off.
realityrd said:
How i can know what is my correct RUU file. I have S-off (does It matter?)
Click to expand...
Click to collapse
This is the matching RUU for taking your phone back to full stock --> LINK
You probably will need to flash the included recovery before you run the RUU.
LS.xD said:
This is the matching RUU for taking your phone back to full stock --> LINK
You probably will need to flash the included recovery before you run the RUU.
Click to expand...
Click to collapse
Include recovery? You mean the stock recovery?
Thanks n_n
Don't Flash CWM Latest.
Guys Don't flash CWM Lastest Version from its website. It doesn't work. Try TWRP 2.4 or above.
Jnanadarshan said:
Guys Don't flash CWM Lastest Version from its website. It doesn't work. Try TWRP 2.4 or above.
Click to expand...
Click to collapse
Which recovery version doesn't work?
6.0.4.6
LS.xD said:
Which recovery version doesn't work?
Click to expand...
Click to collapse
Version 6.0.4.6 Doesn't work.
Jnanadarshan said:
Version 6.0.4.6 Doesn't work.
Click to expand...
Click to collapse
At all? Or for specific roms?
Hello guys hopefully someone can help me
HTC One Sv LTE (Australian under optus)
Tampered, unlocked, s-off
I installed Viper Sv 15 Rom and everything is sweet apart for the firmware.zip
Once flashed the firmware I can't go anymore on recovery mode, it stuck on the withe logo (htc and the red writing), i tried to flash TWRP (latest updated one) again and again and AGAIN... it flash successfully but when i try for go in recovery isn't working.
The mobile work if i bootup normally, i mean there is no problem with the rom i can use the phone.
IF I don't flash the firmware the phone goes on recovery... but i needed because of the robotic sound call.....
Can be because of this firmware file? also tried to match the two text file optus OTA and the one provided for the Viper sv, I swap them otherwise he can't flash it <model id fail>
modelid: PL8010000
modelid: PL8015000
cidnum: OPTUS001
mainver: 2.14.980.2
btype:1
aareport:1
hbootpreupdate:11
modelid: PL8010000
modelid: PL8015000
cidnum: OPTUS001
mainver: 3.11.401.106
btype:1
aareport:1
hbootpreupdate:11
Sorry if it's messy my post I'm not very confident with forums if you guys need more questions or details just ask, thanks:good:
What TWRP version are you using exactly (Link please)?
You are sure, your bootloader is not "Locked"?
Thanks for replying to me.
I'm using the latest version of TWRP "openrecovery-twrp-2.7.1.0-k2_ul"
I tried also to flash the other recovery CWM but nothing, the phone stuck on Htc logo with the red writing and on top it says "entering in recovery mode..." but nothing happen.
Yes it is unlocked .
I don't know anymore what to do at this point and I'm desperate because without recovery if something happen I'm with a big disadvantage.
If someone have any other ideas please let me know.
Thankyou guys
velocistar83 said:
Thanks for replying to me.
I'm using the latest version of TWRP "openrecovery-twrp-2.7.1.0-k2_ul"
I tried also to flash the other recovery CWM but nothing, the phone stuck on Htc logo with the red writing and on top it says "entering in recovery mode..." but nothing happen.
Yes it is unlocked .
I don't know anymore what to do at this point and I'm desperate because without recovery if something happen I'm with a big disadvantage.
If someone have any other ideas please let me know.
Thankyou guys
Click to expand...
Click to collapse
Try this recovery please.
old.splatterhand said:
Try this recovery please.
Click to expand...
Click to collapse
Which one the TWRP 2.7.0.1 Released ?
Thanks
YES is it working but how come??!?!!?!
I tried quiet a few versions...Do you know the reason?
Oh my god thank you so much I was getting crazy about this... :crying:
velocistar83 said:
YES is it working but how come??!?!!?!
I tried quiet a few versions...Do you know the reason?
Oh my god thank you so much I was getting crazy about this... :crying:
Click to expand...
Click to collapse
I'm not in the building business of recoveries, but the 2.2x hboot refuses to boot to an older recovery (for hboot 2.0 and older).
There are special changes for this hboot that are needed for recovery to start.
In simple words: when you are on hboot 2.2x you need the newest TWRP versions, all older versions will fail.
Sadly the older recoveries are wide spread on the web and not everybody comes to xda to search for the files.
Only when the problems start, lol
Hi everyone! Have a big problem with wife's HTC ONE SV K2UL. In the start he has official last ROM with no root, s-off and other things. In one fine day he starts work with a tons of lag's, restarts after boot and write message about “System force close”. I read many post's here and other forum and try to upgrade to custom firmware. Yes, of course I do unlock and flash TWPR, can't s-off cos don't have stable working firmware, try to write SuperSId, but w/o root it didn't work. Then I try different rom's: viper, simple etc (yes, I flash with "fastboot flash boot boot.img", cos S-ON) But every time have the same problem with lags and restarts. Try to flash RUU, but have errors: "12 signature verify fail", when boot lock and "99 signature failed" when tempered or unlock. In the end I try to use SimpleRom v4 with mod f2fs. It's starts, but haven't root, say that he lost binaries. Try to CHMOD 755 System folder, use TWPR to flash different *.zip with SuperSU and SuperUser, but the path /system/bin/su /system/bin/.ext/.su /system/xbin/su are empry anyway.
Now have: Unlock (TEMPERED), TWRP 2.7.1.1 (f2fs), HBOOT 2.00, S-ON, NO supercid, SimpleROM v4 + f2fs, NO root.
It's also restarts and don't work properly. What method's I can try to restore my fully worked HTC One SV.
P.s Sorry for my bad Eng and thx a lot for helping.
I would try a stock rom first!
SimpleROM is highly modded. Give this one a try. Moonshine S-off should also work with it.
To think about other steps we need more information.
Connect your phone with fastboot and type into the cmd:
Code:
fastboot getvar all
Put the output here (except your IMEI & Serial number)
And maby explain your restart (after reboot?) issue a bit more detailed.
old.splatterhand said:
Code:
fastboot getvar all
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: 1.18.40a.00.05
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: k2_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8010000
(bootloader) cidnum: HTC__A07
(bootloader) battery-status: good
(bootloader) battery-voltage: 3818mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
Today I will try to flash ROM from your link. Thx.
Yes, flash it and see how it works. If your problems are still there, you should try moonshine to get S-off. Then you should be able to downgrade hboot and run the RUU.
After installation official rom from link I have message:
"Setup isnt't responding. Do you want to close it?"
"Process system isn't responding. "
After boot, when I try to move circle for unlock phone, i see green HTC on white and after some second's it's restarts. Can't do anything.
P.s Lock screen also be on black pole (
Never had such message.
Have ypu done already the update to 4.2.2?
I would try another rom to noot, but if all get such problems, i think it is the phone itself.
Usually the roms which are released, don't have such big problems and if they really have, devs are working on a solution.
Hi there!
Any news related to the problem? I have exactly the same problem (problem show up after doing factory reset, before that almost a year past by using it with absolutely no problems, of course didnt perform factory reset before, rom was stock 4.1.2, CID htc_032)HTC one SV k2ul stuck at htc logo, able to enter bootloader, unlocked at HTCdev, flash TWRP, tryed several roms (flash over recovery, flash boot.img with fastboot, wipe cash...cose I am S-on). First time it boot up OK (everything is working), but after turning it off, and power it back on, it stuck at lock screen. When unlock it show white htc screen, and after a while show "system not responding.......". Sometimes factory reset over recovery bring the phone up, working normaly (sometimes), but if no luck with factory reset, only thing is flash again rom and it work...until next reboot (what is needed for S-off). Im on k2ul_JB_2.14.401.6_stock_odexed_03_06_13 , and I have tryed Saturn III v1.20 (after first boot all OK, day after mobile data not working, boot problem same like rom mentioned before) and k2ul_4.2.2_3.11.401.1_stock_odexed_v3 (booting problem less expressed, booting normaly after "power down" with power button, stuck only after rebooting from adb, sound while calling heavily distorted....).
So, any idea what went terribly wrong after factory reset??? Why the system is not responding after reboot (what is blocking it, or where is gone???) And, how to fix distorted in call sound on 4.2.2. rom with S-on, and no superCID?
Please help me get my HTC working normally!
thx in advance
To update firmware to the newest do the following:
- relock your bootloader
- download this http://fotadl.htc.com/OTA_K2_UL_JB4...2.14.401.6_release_338297mseg08soslxcubit.zip and extract firmware.zip to your pc.
- rename firmware.zip to PL80IMG.zip and copy to your ext sdcard
- boot to bootloader and confirm to flash with vol+
- reboot to fastboot mode and unlock your bootloader (usually you can use the unlock token from first time)
After firmware has flashed, you have no TWRP anymore and your old rom will not boot.
So, best is to download a 4.2.2 rom for your device and copy to you sdcard before.
And also grab the latest (!) TWRP from my index thread, because you need to flash this right after firmware in fastboot mode.
Hi there!
First, thank you for your answer!
so, I have to:
-relock bootloader (enter bootloader, fastboot, open adb, fastboot oem lock)
-extract firmware, rename to PL80IMG.zip, put on sd, reboot to bootloader (I have try once to downgrade hboot with PL80IMG, but it didnt ask vol+ to confirm, blue vertical bar in right corner filled up and bootloader starts, is that OK, or not, I mean, not asking vol+ to confirm?)
-unlock bootloader, flash TWRP recovery
-go in recovery (perform any wipe?), install from sd (perform any wipe after install finish?)
-what after instaling rom from recovery? I am S-on, do I need to take out of rom boot.img file, go to fastboot, and flash again boot.img?
thx in advance
The answer is inside the quote:
1vanK said:
Hi there!
First, thank you for your answer!
so, I have to:
-relock bootloader (enter bootloader, fastboot, open adb, fastboot oem lock) Lets say: open cmd, not adb. But i think you mean the right step.
-extract firmware, rename to PL80IMG.zip, put on sd, reboot to bootloader (I have try once to downgrade hboot with PL80IMG, but it didnt ask vol+ to confirm, blue vertical bar in right corner filled up and bootloader starts, is that OK, or not, I mean, not asking vol+ to confirm?) Downgrade hboot is not possible with S-on, maybe that was the reason. Usually it asks to confirm, but if not it should be ok also. It is no modded file, it is firmware by HTC.
-unlock bootloader, flash TWRP recovery
-go in recovery (perform any wipe?), install from sd (perform any wipe after install finish?) Only wipe before, not after. A backup before the wipe does not hurt also.
-what after instaling rom from recovery? I am S-on, do I need to take out of rom boot.img file, go to fastboot, and flash again boot.img? The boot.img is inside the firmware.zip. It depends on the updater script of the rom you are using. Some wipe the partition with boot.img, some not. Try first without, if phone does not boot, flash boot.img.
thx in advance
Click to expand...
Click to collapse
All depends that you have an k2ul and the cid matches the android-info.txt inside of firmware.zip!
Hi,
right after flashing PL80IMG you provided everything start to work ok :good: ! Even rom that was currently on (4.1.2) reboots ok (didnt stuck like before). But, no matter what, I carried out all steps from previous post, an I am now on 4.2.2, and all is so far running great (try to reboot several times, with power button, from fastboot, from recovery,factory reset... didn stuck at htc screen at all, and no distorted sound during calls)! Thank You so much!!!
Any way, even "so far so good", I wonder, what was wrong? Why everything crashed last time after factory reser (on stock, no root, locked)?
I guess there is no way to get superCID on 4.2.2? What about S-off?
Thank you very much on provided link! :good:
Great news. Happy to help!
What was wrong, hard to tell, if we don't have your device here.
You can get S-off with http://rumrunner.us then Supercid.
old.splatterhand said:
Never had such message.
Have ypu done already the update to 4.2.2?
I would try another rom to noot, but if all get such problems, i think it is the phone itself.
Usually the roms which are released, don't have such big problems and if they really have, devs are working on a solution.
Click to expand...
Click to collapse
Yeah, on start i have full stock rom 4.2.2, now have ROM from your link. This message's be in all rom's which i flash to my htc.
MakOS said:
Yeah, on start i have full stock rom 4.2.2, now have ROM from your link. This message's be in all rom's which i flash to my htc.
Click to expand...
Click to collapse
It is important to use the firmware from the OTA update with the rom version, means: if you want to use a 4.2.2 rom, you need the firmware from 4.2.2.
If you want to use a 4.1.2 rom you need the firmware. So please don't mix that.
Have you already done (some time ago) the OTA update to 4.2.2?
I would be no surprise, if you use 4.2.2 rom on 4.1.2 firmware and you get errors.
old.splatterhand said:
It is important to use the firmware from the OTA update with the rom version, means: if you want to use a 4.2.2 rom, you need the firmware from 4.2.2.
If you want to use a 4.1.2 rom you need the firmware. So please don't mix that.
Have you already done (some time ago) the OTA update to 4.2.2?
I would be no surprise, if you use 4.2.2 rom on 4.1.2 firmware and you get errors.
Click to expand...
Click to collapse
Yes, on start it have 4.2.2 OTA update. But i try to flash 4.2.2, 4.2.1, 4.1, try all link, but anyway have the same message's. Want any stable w/o error's firmware, cos now it not work properly ((
Hi there,
so now i have managed some how (I don`t know how) to brick my one sv. I was moving TWRP folder with backup files from PC to phone internal storage, got ext4 error, and phone just died... no lights on charge, no bootloader, nothing.......
When I reconnect USB it is detected as QHSUSB_DLOAD device, so that indicates that there is no more bootloader... I was reading that this is fixable (without jtag box), there was explanations how to do it for sensation, and M7, but there is nothing for ONE sv...
Can U help me with advice??? How to get bootloader back on rolling???
THX in advance!!!
Sorry, no idea. If you have guides for other phones you should look there, i guess.