When turn ON GPS LOCATION show this message
'in android location provider changed"
Anybody show this message
This message is broadcasted when you enable GPS, one of your apps might be showing this toast. Try to use Notification History or Toast Source to identify the source app of the toast.
Hello, I am from Italy and have another problem:
GPS on Google Maps works great until I receive (or I do) a call: in this moment GPS lose its signal until I finish my conversation. Looks like GPS and Phone signal cannot work at the same time.
Someone have this problem and find solutions?
Thanks dude you awasome problem solve
Just curious, which app was it?
Toast
Related
I just flashed up the new Energy ROM. I keep getting a pop up that says "Device in registering on a voice service only network. Data services are currently unavailable." The internet seems to be working fine. I know i am in a 1X only service area but everything was fine on the stock ROM. Why am i getting this pop up and how can i fix it?
Anyone help with a solution for the "voice service only" popup ???
I am getting the same pop up on the mighty rom and i am also in the 1x area. Data is working fine also but this error is annoying.
Device is registering on a voice only network error message
Device is registering on a voice only network. This is extremely annoying. This error message will pop up in no more than 5 seconds after you click OK. This happens on flashed roms of the Touch Pro 2. I am on Verizon.
rayearth05 said:
Device is registering on a voice only network. This is extremely annoying. This error message will pop up in no more than 5 seconds after you click OK. This happens on flashed roms of the Touch Pro 2. I am on Verizon.
Click to expand...
Click to collapse
I've been looking for a possible fix to this issue as well and can't find anything. I also contacted htc support hoping there might be a way to disable the message alert but they say it's verizon's network that sends out the message? I guess this makes sense considering it doesn't happen with the Verizon stock ROM! I was hoping a registry hack might do the trick, but if it's a message from the network then there's not much you can do to stop it unless verizon was to issue a specific carrier cab to address it. . .
did you program your phone with *228 after your last flash??
Check this out:
http://forum.ppcgeeks.com/showthread.php?t=98401&highlight=modified+prl&page=9
More specifically:
http://forum.ppcgeeks.com/showpost.php?p=1465879&postcount=85
This bug occurs on all Froyo roms (I tested it on:CM6, geo411m, evil, enomther, modaco and Google stock rom)
When I'm in a area with 0 signal (It means I cannot do any call) the signal status bar displays 2 or 3 levels, incorrectly.
I checked it on about 6 existing Froyo roms, on my Nexus One device and this bug occurs on all roms, includes the google official stock rom.
Please see the attched screenshot.
We tested it on some different nexus devices and it occurs on all these devices. My device version is Nexus One version: 110 (AT&T version).
Here is the screenshot of the bug:
******* (I cannot add the link because my account is new :/ )
I opened a new bug about it for Google, but can any developer fix it?
Here is the bug I opened for Google:
***** (I cannot add the link because my account is new :/ )
bug number:11346
Can you(the members of the forum also mark the bug with star, in order to promote the priority of the bug?
It's absolutely impossible to work with an OS that displays a wrong signal status. You never know if you really have signal or not :/
I backed to 2.1 because this bug.
Thanks to all.
Robert
I think this is more radio then ROM related, and I don't have this problem on my Nexus one. No signal=0 bars.
But you could try to flash the so called Korean radio(see Nexus android development forum ), to see if that changes anything.
Hello Robert
That is normal even in old phones. It is not a bug!!!
That signal strengh is real and correct.
The explanation is simple, when your SIM card can not reach to any of the base stations (antennas) of your provider, we generally say that you lost the signal and you can not make any calls. BUT for emergency purposes, your phone connects to the strongest available antenna of other providers (again, only when you can not reach the ones from your provider) to allow you to make emergency calls. That is why (at least in europe) when we lose the signal of our phones, usually in 95% of the cases it will still say "Only emergency calls 112 allowed".
So the signal bars you get are in reallity the signal bars of the antenna you are connected to make emergency calls. So no bug and actually it is useful, it would make no good if you try to disable that.
You will not get any bars for the signal when you are not even able to make emergency calls.
Bulltza said:
Hello Robert
That is normal even in old phones. It is not a bug!!!
That signal strengh is real and correct.
The explanation is simple, when your SIM card can not reach to any of the base stations (antennas) of your provider, we generally say that you lost the signal and you can not make any calls. BUT for emergency purposes, your phone connects to the strongest available antenna of other providers (again, only when you can not reach the ones from your provider) to allow you to make emergency calls. That is why (at least in europe) when we lose the signal of our phones, usually in 95% of the cases it will still say "Only emergency calls 112 allowed".
So the signal bars you get are in reallity the signal bars of the antenna you are connected to make emergency calls. So no bug and actually it is useful, it would make no good if you try to disable that.
You will not get any bars for the signal when you are not even able to make emergency calls.
Click to expand...
Click to collapse
Hi Bulltza,
Thank you very much for this detailed answer...I checked it and you right...
I still think this is not a good feature because when I am in a area with no signal and I see that there is some levels in the status bar, it confuse me and I don't know that I cannot get incomming calls.
anyway thank you for the answer.
YoMark, thank you too for your help
Its not really a bug man They only should add a icon or a notification for Emergency Calls Only. If u dont want this feature u are veryr stupid Emergency Calls! We need them
xtcislove said:
Its not really a bug man They only should add a icon or a notification for Emergency Calls Only. If u dont want this feature u are veryr stupid Emergency Calls! We need them
Click to expand...
Click to collapse
What's the relation to be stupid or not?!
It seems that you are the stupid here that didn't understand what I mean and call me stupid!!!!!
Did I write anywhere that I don't want the Emergency Call?!?! I wrote that it is impossible to work with an OS where you see that you "have signal" but in actual you don't know that you cannot get incomming calls.
Learn to understand and give respect to your colleagues instead calling them stupid and other!
Hello guys,
Thought you might help...
I bought an AT&T i987 locked to be used on rogers network. Rooted the photo and installed the app sgs unlock ran perfect.
Now, here's the problem I'm having after 1 month of use:
MMS: I can send SMS but I can't send nor receive MMS, I found a thread saying to play with the proxy setting rogers.mms.com wthv. It didn't work.
SMS: The hours written on my sent message is fine but every sms I receive are 5 hours sooner ( let say it's 15h30, It will show 8h30) Still annoying.
GPS: Some people says it's slow, but mine simply won't lock even after 5 minutes LOL. Do you need absolutly a data plan to make it work? I thought it was working like any garmin GPS out there. connecting to a satellite not the internet.
AT&T apps block ?? It won't let me download any apps out of the android market. is there a way to delete that stupid option?
And this is not related to my ATT phone but DAMN the call volume is very WEAK. I barely heard people's voice but they do heard me fine. It's like the speaker is simply too weak or there's a tweak for this?
Well guess I will start by saying MANY THANKS for your times!
To fix the mms issue do a search for the rogers message center phone number on google and input it in the stock messaging app.
As for the time issue its actually a rogers issue, either use a messaging app(handcent) that can offset the time or get sms time fix from the market.
Plenty of gps info around the forum, keep looking.
Have you tried flashing a rogers ROM to see if that fixes it?
Hi,
I have been using the Xperia custom ROM for quite some time now. I am very happy with the ROM overall but I have a big issue which I had with the original Xperia port as well. I am in UK. I don't get calls from unknown numbers. If I dial from mobile it comes fine. But if I dial from any landline where the number is blocked/private ( I used my office landline ), it doesn't even appear on my Nexus. But I can hear a very small ring on the landline I am dialing from and than it disconnects. On my Nexus S I don't even see a missed call, although it says - Data traffic disabled every time. And if the screen is turned on when I am calling on Nexus S if give the following error on screen- Unfortunately, the process com.android.phone has stopped. When I click OK, it just says Data traffic is disabled .
It might be a ROM specific issue but if someone else has faced the issue and know the resolution please let me know.
Thanks
Sometimes I get the message "I'm not seeing a WhatsApp number for that contact" when I try to use assistant to send a whatsapp message, but not always. Sometimes everything works good and sometimes I get the error.
The same thing happens when I call someone with assistant.
When it's working:
Right after rebooting the watch or turning off and on bluetooth.
When everything is working good in google app on phone > Settings -> Assistant -> devices -> galaxy watch 4, it shows "connected" and I can use assistant for commands with contacts
When it's not working:
After a while (minutes or hours) in google app the status changes to "disconnected", I don't know why.
Important: even when it shows "disconnected" the watch is still fully paired and everything works fine, notifications, calls, and so on.. even assistant is still working, except for commands with contacts like "call dad" or "send a whatshapp to John"..
Any fix? Thanks
Hi. Well I tried this silly way of forcing watch assistant to connect to google. Ask him to show you something in google like in your drive or something. Like your most recent photo. Even if you don't have anything there, it will connect to Google to look for it, and after that you can commence with send whatsup.