Related
For fix fix EXYNOS BUG
1.Make a Backup
2.Full wipe
3.Download mode and through ODIN flash this firmware XX LL7 http://www.hotfile.com/dl/187400765/9fda7d4/N7100XXDLL7_N7100OXADLL4_XEF.zip
4. root chainfire http://download.chainfire.eu/264/CF-Root/CF-Auto-Root/CF-Auto-Root-t03g-gtn7100.zip
5.Now you have superuser, not CWM.
6. Trough ODIN flash CWM Chenglu https://hotfile.com/dl/176065007/332cffb/cwm6-recovery-n7100-121014.tar.html
7.flash this Rom or another or restore Backup!
8.Triangle Away if you want
AbyssN2 kernel 1.5.1 Final Stable Version
Deodex
Transparent weather widget and more, see screenshot!:laugh:
]
Info and download:
http://www.nonsolosmartphone.it/post78496.html#p78496
It's compatible with Simplistic Framework V3.0.1 DLL4!
:laugh::silly:
DWNLDNG NOW
I'll try & test it 2NT
:good:You're welcome!:good:
Hello Antonio, thanks for your hard work and time, Ok I installed the official firmware DLL7 by odin to update the bootloader than rooted it installed recovery gave it a complete wipe (data factory reset, system wipe, cache and dalvik wipe), than installed your Rom, it boots up but message pops up as soon as phone starts "set up wizard has stopped working" and the phone restarts.....any help, thank you.
vtec303 said:
Hello Antonio, thanks for your hard work and time, Ok I installed the official firmware DLL7 by odin to update the bootloader than rooted it installed recovery gave it a complete wipe (data factory reset, system wipe, cache and dalvik wipe), than installed your Rom, it boots up but message pops up as soon as phone starts "set up wizard has stopped working" and the phone restarts.....any help, thank you.
Click to expand...
Click to collapse
+1
I have the same problem. I always do a full wipe.
vtec303 said:
Hello Antonio, thanks for your hard work and time, Ok I installed the official firmware DLL7 by odin to update the bootloader than rooted it installed recovery gave it a complete wipe (data factory reset, system wipe, cache and dalvik wipe), than installed your Rom, it boots up but message pops up as soon as phone starts "set up wizard has stopped working" and the phone restarts.....any help, thank you.
Click to expand...
Click to collapse
Mystenes said:
+1
I have the same problem. I always do a full wipe.
Click to expand...
Click to collapse
The full wipe, you have to do when flash the original firmware,for Exynos Bug Fix, then do the root and then my rom!:good:
ok thank you very much, I will give it a try, Regards.
Sent from my GT-N7100 using xda premium
Hello
I have the same problem
Thank u
The amazing rom
The amazing icons
Can you work Theme holds fingerprint includes the upper bar and screen Contact slash black or blue
Thanks again
Excuse use Google translation
majeeed said:
Thank u
The amazing rom
The amazing icons
Can you work Theme holds fingerprint includes the upper bar and screen Contact slash black or blue
Thanks again
Excuse use Google translation
Click to expand...
Click to collapse
No problem, but I love this theme!
araby said:
Hello
I have the same problem
Click to expand...
Click to collapse
Full wipe before flash original firmware, then no wipe for install this rom!:good:
hi there, regarding the abyss kernel, im using the default setting, but my phone seems like turning off automatically ( the led still flashing, only black screen) once every after full charge. I have to press the power button to turn it back on.
do you know what might be the problem ? or maybe the correct settings other than defaults? thanks. been reading the angelo thread in the nss forum but im still clueless , lol
antoniomistretta said:
I suggest to you, to have the new bootloader to flash via Odin the new official firmware, of course after making a backup!:
............................
............................
............................
..................
Click to expand...
Click to collapse
antoniomistretta said:
The full wipe, you have to do when flash the original firmware,for Exynos Bug Fix, then do the root and then my rom!
Click to expand...
Click to collapse
Thank you Antoniomistretta , my old friend , for your great wrk
I DO folow your instructions , and had a smooth instalation without any problems , so far
Keep the GOOD wrk
May GOD bless you
abumhmmd1 said:
Thank you Antoniomistretta , my old friend , for your great wrk
I DO folow your instructions , and had a smooth instalation without any problems , so far
Keep the GOOD wrk
May GOD bless you
Click to expand...
Click to collapse
Thank you, thank you, thank you!:laugh:
For fix fix EXYNOS BUG
1.Make a Backup
2.Full wipe
3.Download mode and through ODIN flash this firmware XX LL7 http://www.hotfile.com/dl/187400765/9fda7d4/N7100XXDLL7_N7100OXADLL4_XEF.zip
4. root chainfire http://download.chainfire.eu/264/CF-Root/CF-Auto-Root/CF-Auto-Root-t03g-gtn7100.zip
5.Now you have superuser, not CWM.
6. Trough ODIN flash CWM Chenglu https://hotfile.com/dl/176065007/332cffb/cwm6-recovery-n7100-121014.tar.html
7.flash this Rom or another or restore Backup!
8.Triangle Away if you want
shinchan162 said:
hi there, regarding the abyss kernel, im using the default setting, but my phone seems like turning off automatically ( the led still flashing, only black screen) once every after full charge. I have to press the power button to turn it back on.
do you know what might be the problem ? or maybe the correct settings other than defaults? thanks. been reading the angelo thread in the nss forum but im still clueless , lol
Click to expand...
Click to collapse
Strange. When you get it, but it should not, if you left everything default, hold for ten seconds, the power button.Or change kernel!
Yesterday:
Hi Antoniomistretta ,
...
I noticed that the battery life is better in this ROM
did you introduced some tweekes , or it is related to XXDLL7 firmware , or I'm just lost
abumhmmd1 said:
Hi Antoniomistretta ,
...
I noticed that the battery life is better in this ROM
did you introduced some tweekes , or it is related to XXDLL7 firmware , or I'm just lost
Click to expand...
Click to collapse
Same old tweaks, my friend. Firmwar is good, kernel is good!:good:
abumhmmd1 said:
Hi Antoniomistretta ,
...
I noticed that the battery life is better in this ROM
did you introduced some tweekes , or it is related to XXDLL7 firmware , or I'm just lost
Click to expand...
Click to collapse
antoniomistretta said:
Same old tweaks, my friend. Firmwar is good , kernel is good !:good:
Click to expand...
Click to collapse
OK
this means .. better battery in this ROM not related to the first one , neither the last one .
and you agree with me ... its related to XXDLL7 firmwar , and added .. the kernel
THANKs
My wife has Nexus 5 (it is completely stock and unrooted with unlocked bootloader) running running Android 4.4.2. Recently, the stock camera app stopped recording videos. Tapping the record button does not do anything while camera works perfectly in photo mode. I factory reset the phone but the problem persists. Any suggestions? Thanks in advance.
lock the bootloader and send it back
shahidhussain said:
My wife has Nexus 5 (it is completely stock and unrooted with unlocked bootloader) running running Android 4.4.2. Recently, the stock camera app stopped recording videos. Tapping the record button does not do anything while camera works perfectly in photo mode. I factory reset the phone but the problem persists. Any suggestions? Thanks in advance.
Click to expand...
Click to collapse
Try to clear data and cache from camera in settings.
If that doesnt work either and you really have done the factory reset, you have to send it to repair bc of an hardware deffect. :crying:
lichti1901 said:
Try to clear data and cache from camera in settings.
If that doesnt work either and you really have done the factory reset, you have to send it to repair bc of an hardware deffect. :crying:
Click to expand...
Click to collapse
I will try that but I think factory resetting clears cache, anyway. The phone camera worked fine previously but now suddenly it stopped.
Thanks anyway.
I have the same problem, when I change the camera app to record nothing happens when I press the red record button. I think the problem started when I upgraded to 4.4.2
Sent from my Nexus 5 using Tapatalk
shahidhussain said:
I will try that but I think factory resetting clears cache, anyway. The phone camera worked fine previously but now suddenly it stopped.
Thanks anyway.
Click to expand...
Click to collapse
And you flashed the right one? Hammerhead-4.4.2
Like i said before, if that doesnt help, you have to send it back to get a replacement.
You need to uncompress each download before use, which creates a new directory for that exact download. That directory contains a ./flash-all.sh script, which handles the various operations, installs the necessary bootloader, baseband firmware(s), and operating system. Note that this operation deletes all user data by default
Click to expand...
Click to collapse
Make yure that data gets wiped also! Dont forget to backup your sdcard bc it gets also wiped.
lichti1901 said:
And you flashed the right one? Hammerhead-4.4.2
Click to expand...
Click to collapse
I did not flash anything. The phone was OTA updated. Please note that the phone received OTA update and when I applied it, it completed its process but did not update (it was still on older android version) and this happened several times (I mentioned this on a separate thread here on XDA old post).
lichti1901 said:
And you flashed the right one? Hammerhead-4.4.2
Like i said before, if that doesnt help, you have to send it back to get a replacement.
Make yure that data gets wiped also! Dont forget to backup your sdcard bc it gets also wiped.
Click to expand...
Click to collapse
I downgraded Nexus 5 from Android 4.4.2 to 4.4 and now the camera is working fine. But I am afraid of updating it back to 4.4.2.
shahidhussain said:
I downgraded Nexus 5 from Android 4.4.2 to 4.4 and now the camera is working fine. But I am afraid of updating it back to 4.4.2.
Click to expand...
Click to collapse
Flash the whole 4.2.2 stock rom in fastboot bro, i have no issues with video recording both on Dalvik and Art runtime
lichti1901 said:
And you flashed the right one? Hammerhead-4.4.2
Like i said before, if that doesnt help, you have to send it back to get a replacement.
Make yure that data gets wiped also! Dont forget to backup your sdcard bc it gets also wiped.
Click to expand...
Click to collapse
gee2012 said:
Flash the whole 4.2.2 stock rom in fastboot bro, i have no issues with video recording both on Dalvik and Art runtime
Click to expand...
Click to collapse
Yes, I did it. Flashed the stock 4.4.2 and everything seems to work fine. However, when I tried updating using OTA after downgrading the update failed and stopped with "Error" message. After flashing 4.4.2 from scratch will hopefully allow smooth future OTA updates. Thanks everyone.
shahidhussain said:
Yes, I did it. Flashed the stock 4.4.2 and everything seems to work fine. However, when I tried updating using OTA after downgrading the update failed and stopped with "Error" message. After flashing 4.4.2 from scratch will hopefully allow smooth future OTA updates. Thanks everyone.
Click to expand...
Click to collapse
Glad you worked it out!
Good thing is - you got a Nexus, so its easy to flash all the stuff and go back to stock/factory image/recovery/...
:highfive:
Any update on this? I have this exact problem. No unlock, not root just pure OTA stock.
1. Video does not record. You press the red button and no timer comes up.
2. A VID_20140126_224910.mp4.tmp file is created 395.54 KB.
3. Time lapse works as do all the other camera functions.
4. The basic Google FAQ has generic instructions if an app does not work so I followed these.
5. in safe mode the camera works fine.
6. Power off and on again. The Video Camera then works fine and creates normal .mp4 files.
Things I have done that may affected the Camera in the first place;
1. Clear cache.
2. Put a .thumbnails file in DCIM to stop the gigantic .thumbnail folder being created.
3. Running nova launcher.
Unlikely these are a factor as I isolated them as an issue and rebooted but worth a mention just in case.
Camera works but have found the it subsequently stopped working again and had to repeat the Google FAQ steps to fix an app.
To answer my own question I found the uninstalling Said It_1.3.37.apk fixed the problem and just to prove it reinstalling brought the problem back.
---------- Post added at 06:01 PM ---------- Previous post was at 05:27 PM ----------
Quick update. the developer emailed me back. He co firmed it does the same on his device and will send an update.
Guys i am not able to take any screenshort on my phone after updating to cos 12.1. When i try to take a screen short it says ( can't take screen short due to limited storage space, or its not allowed by the app or the organization) pls help and how to take screen short.
Thanks
hi mate, here a few solutions for you:
after updating you should wipe cache.
You can make a screenshot by holding volume down and power button at the same time.
Otherwise you can add the screenshot menue to the power menue:
go to settings, buttons, power menue and check screenshot. So you can take a screenshot with your power menue. Don't forget to make a reboot, done :fingers-crossed:
Greets, reinipic
reinipic said:
hi mate, here a few solutions for you:
after updating you should wipe cache.
You can make a screenshot by holding volume down and power button at the same time.
Otherwise you can add the screenshot menue to the power menue:
go to settings, buttons, power menue and check screenshot. So you can take a screenshot with your power menue. Don't forget to make a reboot, done :fingers-crossed:
Greets, reinipic
Click to expand...
Click to collapse
No success, did all the steps same issue and tye error displaying
xdaat said:
No success, did all the steps same issue and tye error displaying
Click to expand...
Click to collapse
Hi mate, from where did you make your update? From 11 to 12 or from 12 to 12.1
When you updated from 11, did you make a clean install?
Remember when you change the major version of a rom you have to make a clean install cause it´s a complete new system.
Dirty flash is only possible within the same version (ex. 12.0 to 12.1) !!!
Try to reflash the rom again, should work:fingers-crossed:
Greets, reinipic
By the way, is your phone rooted or is it stockrom?
reinipic said:
Hi mate, from where did you make your update? From 11 to 12 or from 12 to 12.1
When you updated from 11, did you make a clean install?
Remember when you change the major version of a rom you have to make a clean install cause it´s a complete new system.
Dirty flash is only possible within the same version (ex. 12.0 to 12.1) !!!
Try to reflash the rom again, should work:fingers-crossed:
Greets, reinipic
By the way, is your phone rooted or is it stockrom?
Click to expand...
Click to collapse
I got the solution on Oneplus forum and it helped . btw thanks for ur help too
Hi everybody,
I'm back with a new problem in my Honor 8 (FRD-L04)... I was one of the user who installed the faulty version 15.0 of the Magisk update, so as you can imagine my phone went into bootloop and had to go all over from a backup I did the past September. I was running the firmware version B385, and because I lost many important things for no backing up lately, I decided I would just update to the firmware version B389. My phone was rooted, so I had to flash a stock recovery and do a full package download for the update. Everything went smooth and the update worked well. I had to do a full wipe because after the update the bootloader locked and I unlocked it to root the phone once again. This happened 2 days ago, and today I tried to use the camera and this is were everything started going down. The camera simply doesn't load, if I clear the data and cache of the app and reopen the app, it shows the initial screen where you need to swipe it to start using the camera but after that it goes in some kind of opening closing loop, until finally it closes. When I try to open it again, it stays in a black screen until it closes. I have restarted the phone and cleared the dalvik/cache in TWRP but the problem persists. I don't know if this is important, but after starting the camera app and failing launching it, the flashlight stops working too. If i restart the phone, and start the flashlight it works well. I have been thinking in reinstalling the camera app, but I can't find the apk for it.
Hope somebody can help me with this small issue, so thanks in advanced
Rommco05 said:
Try to downgrade to an older version
Click to expand...
Click to collapse
Thanks for replying Rommco05... You mean to downgrade to the B385 update? or rollback to B381?
I have found the update.zip file for the B389 upgrade here http://gsmtube.com/android-tips-tri...89-android-7-0-nougat-update-europe-9747.html but the links appear to be broken..
Rommco05, can you help me how to downgrade? I'm a noob at this and your help would be greatly appreciated! thanks
Hi friends,
Since yesterday, my wifi and bluetooth don't work anymore. When enabling them, it scans nothing . I've made a factory reser without any psuccess !
Never seen an issue like this on any phone...
Thanks for your help guys
Have you tried restarting the phone? I had 1 time yesteday too, suddenly, the phone was idle, and when I checked Wifi found nothing. Restarted and then it works again. Not sure if related to March update or some other stuffs
creezalird said:
Have you tried restarting the phone? I had 1 time yesteday too, suddenly, the phone was idle, and when I checked Wifi found nothing. Restarted and then it works again. Not sure if related to March update or some other stuffs
Click to expand...
Click to collapse
Restarted and also factory reseted
YassGo said:
Restarted and also factory reseted
Click to expand...
Click to collapse
Wow...after a factory reset, that's pretty much it!
You can try doing the reset network settings button (you can search it in the search bar in Settings or find it in the Internet setting on top right button [wrench and reset circle]), but I can't imagine it doing better than a factory reset.
The best/last thing that can be suggested, since it states you are rooted in your sig, is to flash the latest Full Factory image (March) and/or with the "-w" intact (since you stated that you did a factory reset so I imagine your phone is wiped anyways) and see if that doesn't fix the issue. The best 3 methods to achieve this is using the online Android Flash Tool, the tool PixelFlasher that can be found here on XDA, or manually using platform-tools (you must've used one of these in the past to be rooted, so I assume you're familiar).
Hopefully you get it figured out. Worst case, the phone is still under manufacturer's warranty and you should be able to get it replaced with a refurbished if it truly isn't resolved...
simplepinoi177 said:
Wow...after a factory reset, that's pretty much it!
You can try doing the reset network settings button (you can search it in the search bar in Settings or find it in the Internet setting on top right button [wrench and reset circle]), but I can't imagine it doing better than a factory reset.
The best/last thing that can be suggested, since it states you are rooted in your sig, is to flash the latest Full Factory image (March) and/or with the "-w" intact (since you stated that you did a factory reset so I imagine your phone is wiped anyways) and see if that doesn't fix the issue. The best 3 methods to achieve this is using the online Android Flash Tool, the tool PixelFlasher that can be found here on XDA, or manually using platform-tools (you must've used one of these in the past to be rooted, so I assume you're familiar).
Hopefully you get it figured out. Worst case, the phone is still under manufacturer's warranty and you should be able to get it replaced with a refurbished if it truly isn't resolved...
Click to expand...
Click to collapse
Yesterday I dirty flashed March update bmand disabled verity stuff. It forced me to format data. Is it enough or is there a better clean flash way ?
Btw I tried the reset network thing without success
YassGo said:
Hi friends,
Since yesterday, my wifi and bluetooth don't work anymore. When enabling them, it scans nothing . I've made a factory reser without any psuccess !
Never seen an issue like this on any phone...
Thanks for your help guys
Click to expand...
Click to collapse
YassGo said:
Yesterday I dirty flashed March update bmand disabled verity stuff. It forced me to format data. Is it enough or is there a better clean flash way ?
Btw I tried the reset network thing without success
Click to expand...
Click to collapse
Mmmm...when you stated you "factory reset", it wasn't clear whether it was from the OS system setting or when flashing...
I don't think there is a "better clean" way to flash and/or reset the phone. If you're not flashing/sideloading OTA (which you aren't)...
It (reset network) was a very long shot, but worth exploring just in case it hadn't been tried yet...
I mean, I guess you can try Android Flash Tool and even go as far as to flash to both slots and relock bootloader to get a pure, stock status and see if the problem truly sticks that way. You've already wiped the phone, so I doubt this could hurt or you lose anything important at this point. But I can't imagine dirty flashing the latest March update (or even including disabling the verity stuff) wouldnt've addressed or reset things to set the issue straight...
If it's still there after relocking the bootloader and flashing to both slots, then it's warranty exchange time (if you ever want to resolve the issue)...
*most likely the flashing somehow wrecked the system board radio enough...
If/When this works, you'll need go through the trouble of unlocking the bootloader, and reflashing the Full Factory image with disabling the verity & validation stuff, before rooting again.
Ok I think it's a hardware problem. When I shake my phone, I hear something moving.
I dropped it from my bed saturday night. The wifi module must be disconnected.
Let's send it to Google....
YassGo said:
Ok I think it's a hardware problem. When I shake my phone, I hear something moving.
I dropped it from my bed saturday night. The wifi module must be disconnected.
Let's send it to Google....
Click to expand...
Click to collapse
Are you sure that what you are hearing move when you shake the phone is just the OIS for the camera? All phones with OIS will make some noise when you shake them.
jaseman said:
Are you sure that what you are hearing move when you shake the phone is just the OIS for the camera? All phones with OIS will make some noise when you shake them.
Click to expand...
Click to collapse
I don't know my friend. Google will send me the return process tomorrow. They told me 7 to 10 days for repairing. Why did I sell my old oneplus ?
YassGo said:
I don't know my friend. Google will send me the return process tomorrow. They told me 7 to 10 days for repairing. Why did I sell my old oneplus ?
Click to expand...
Click to collapse
I have had several OnePlus phones and they have all been great for me! However, I am having no problems with my 7 Pro either so....YMMV