so i went to this website:
https://romfirmware.com/2017/07/28/huawei-honor-6x-bln-l24/
and it has some different firmware things for the honor 6x BLN L24 model.. and one of them is a point version variant that says can be flashed through twrp?
will this work should i trust this?
edit// on the site it says the version for it is BLN-L24C567B360 however mine is BLN-L24C567B366 (5.0.1 EMUI..i think B360 is EMUI 5.0?)
Rommco05 said:
You have a newer firmware on your phone. Yes point version can be flash over twrp in some situations, same like over dload
Click to expand...
Click to collapse
can you explain what dload is to me? this phon is my first phone ive had that i could really do something with in the rooting community.. my other one was a galaxy grand prime with no rom support or any img files and it got bricked cause i of course had to screw with the build.prop file XD
Rommco05 said:
You must turn off the phone before installing. You need to turn it on with holding all 3 buttons ... vol + + down + power button, after that will start installation
Click to expand...
Click to collapse
okay... so after i extract the particular recovery image i need.. i reboot to the fastboot menu, use adb to flash over the img, like i did with twrp... and reboot into the stock recovery menu?
Rommco05 said:
Basically yes. What you need to do after?
Click to expand...
Click to collapse
put the update.app file in a folder on my sd card called dload. and update from sd card?
also i got two files.. recovery.img and recovery2.img... which do i use ?
okay so i read on a thread for the honor 7 having two recovery images... one being the stupid erecovery crap and the other being normal recovery menu? and i guess im able to get both regular and twrp running together on two different partitions somehow?
Rommco05 said:
You can not have two recovery on your phone. For you, only recovery.img is important. Why do you need to replace twrp for stock recovery?
Click to expand...
Click to collapse
i ****ed up my phone... the good backups i had with twrp got ****ed up and are some messed up rooted version running a stock rom where the sound doesnt work at all, speakers headphone, blue tooth calls, apps, etc and camera doesnt work (front and back and camera app doesnt run) and i cant watch any videos on any app.. so i was going to restore the stock firmware
i still use adb reboot recovery to boot into the regular recovery menu ? (not erecov)
alright.. im stuck again.. i rebooted to recovery and it gave me 3 options. reboot, wipe data/factory reset, and wipe cache partition... what do i do to install the firmware??
see its almsot 4 am for me right now.. if you could just talk me through this i would be okay..
never mindd i looked at your previous reply
and i believe its stuck at 5%
alright well it just rebooted and it didnt restore the stock firmware..i still have all my apps and **** and nothing has changed
do i have to factory reset it now? or..
xSpartacusx said:
do i have to factory reset it now? or..
Click to expand...
Click to collapse
If all working then dont go for factory reset. let it be like this.
shashank1320 said:
If all working then dont go for factory reset. let it be like this.
Click to expand...
Click to collapse
nothings working still . camera, sound videos, etc.. still broken.. phone still rooted.. i followed this other ugie i saw on here where you wipe all partitions and things and then do the file from dload and things, and it still stuck at 5%?
heres another question.. when i went through the firmware finder i got 3 files.. update.zip, update_data_full_public.zip, and update_full_BLN-L24_hw_usa.zip they all contain a update.app file... am i using the right one? im using the one from update.zip
now it appears to be stuck at the boot animation screen.. fml
//edt: standby... i actually havent finished the guide..
yup.. i dun ****ed up.... i cant use adb to reboot to recovery.. say null device not found..
i can go into fastboot by doing power and vol down... if i do vol up and power to try to get into recovery/twrp/whatever, it does nothing and does the normal booting process.. holding all three down just does the automatic sd card install thing that doesnt work... what do i do? i think i ****ed it up
well as far as i can tell my phone is bricked cant boot into recovery via key presses or adb.. i get device not found on adb..
fastboot works and i can flash still but i cant get into twrp or anythin i dont know why..
if i let it boot it just stays at the bootloading animation..
am i able to do factory reset from fastboot?
//edit: i did fastboot erase userdata accoring to some websites online.. no success in booting... is there anything i can do at this point?
Rommco05 said:
Disconnect the phone from the usb and switch off. Turn on and hold the power button + vol up when you see the Honor logo release power button but still hold the vol. Now you should be in recovery, perform factory reset
Click to expand...
Click to collapse
thank you so much for that little tip i thought i ****ed something up that was preventing it from going into recovery..
omg thank you so much it booted to the set up menu... thank you... ill report back with the status of camera and sounds and things
Related
Hello
I followed this guide http://forum.xda-developers.com/show....php?t=2507905 to root my new Nexus 5 and flashed this rom http://forum.xda-developers.com/show....php?t=2528265 onto it, when I tried to boot it up it got stuck in the boot animation so I rebooted into recovery and wiped the data, cache partition and the dalvik cache and tried to boot it up and encountered the same problem so I went to reboot and it wont boot back up not even to the bootloader and when I plug it into my pc its unrecognized and wont even show charging animations
Did I brick my new phone?
Smragnol said:
Hello
I followed this guide http://forum.xda-developers.com/show....php?t=2507905 to root my new Nexus 5 and flashed this rom http://forum.xda-developers.com/show....php?t=2528265 onto it, when I tried to boot it up it got stuck in the boot animation so I rebooted into recovery and wiped the data, cache partition and the dalvik cache and tried to boot it up and encountered the same problem so I went to reboot and it wont boot back up not even to the bootloader and when I plug it into my pc its unrecognized and wont even show charging animations
Did I brick my new phone?
Click to expand...
Click to collapse
Press and hold volume up then connect usb cable, what the result?
bitdomo said:
Press and hold volume up then connect usb cable, what the result?
Click to expand...
Click to collapse
same as above, nothin.
Smragnol said:
same as above, nothin.
Click to expand...
Click to collapse
Then it is bricked , but I don't really understand how could fromating data, cache and dalvik cache destroy the bootloader . There must be something wrong those recoveries, because you are not the only one
Did you ever check the md5 of the rom you flashed? It could have been a corrupted download
does your bootloader work? hold the vol up/down and power on boot. if u can get to the bootloader u can save it with wugs nexus tool.
malibu_23 said:
does your bootloader work? hold the vol up/down and power on boot. if u can get to the bootloader u can save it with wugs nexus tool.
Click to expand...
Click to collapse
If you can get into bootloader you can save it without a tool kit.
Do this if u can't go into recovery
http://forum.xda-developers.com/showthread.php?t=2513937
But if u are able to go into recover, just flash any other rom, make sure you before flashing u do a factory data reset, and after finished wipe cache/dalvik always so u dont go into bootloops.
Through some miracle I was able to get to the bootloader (sat there and held the vol and power buttons for like 3 minutes while my pc dinged and donged as it disconnected and reconnected) but I'm unsure of what to do now. Should I keep trying to load a custom rom on it or just go back to stock? and either or how am I going to get the rom on the internal storage as its still not being recognized by my pc (but I do have fast boot access)
Smragnol said:
Through some miracle I was able to get to the bootloader (sat there and held the vol and power buttons for like 3 minutes while my pc dinged and donged as it disconnected and reconnected) but I'm unsure of what to do now. Should I keep trying to load a custom rom on it or just go back to stock? and either or how am I going to get the rom on the internal storage as its still not being recognized by my pc (but I do have fast boot access)
Click to expand...
Click to collapse
I'd flash the factor image with fastboot and start all over
Do this if u can't go into recovery
http://forum.xda-developers.com/showthread.php?t=2513937
But if u are able to go into recover, just flash any other rom, make sure you before flashing u do a factory data reset, and after finished wipe cache/dalvik always so u dont go into bootloops.
Stay away from tool kits. You got enough problems on your hand
Alright so I got the stock os flashed on there and booted up and everything is looking goood, thanks guys for all your help I'll be sure to come back if I have any more problems
Smragnol said:
Alright so I got the stock os flashed on there and booted up and everything is looking goood, thanks guys for all your help I'll be sure to come back if I have any more problems
Click to expand...
Click to collapse
Glad to hear you're back up and running. Google md5 checksum and make sure the roms you download are good. I think that was your problem
Done this to my Nexus 7.. something went wrong when flashing the Rom and ended up somehow cocking up my drivers aswell.. Weird one.
Glad to hear your back up and running buddy.
I have stock recovery and can't boot. My model is currently reported as "g2" thanks to the mahdi rom which I screwed up flashing.
Has anyone been able to flash back to a stable firmware by bypassing the model check (using a special .dll, anything?).
datdude_tc said:
I have stock recovery and can't boot. My model is currently reported as "g2" thanks to the mahdi rom which I screwed up flashing.
Has anyone been able to flash back to a stable firmware by bypassing the model check (using a special .dll, anything?).
Click to expand...
Click to collapse
i had that problem once and this is what i did...
i booted back into recovery,TWRP or CWM,
i had TWRP , went to advanced wipe and wiped everything,
system,data,cache,dalvik cache
powered down and put it back in download mode and reflashed stock.
it seems that if you dont wipe system it is still picking it up as whatever model rom you flashed.
hope that helps...
podagee said:
i had that problem once and this is what i did...
i booted back into recovery,TWRP or CWM,
i had TWRP , went to advanced wipe and wiped everything,
system,data,cache,dalvik cache
powered down and put it back in download mode and reflashed stock.
it seems that if you dont wipe system it is still picking it up as whatever model rom you flashed.
hope that helps...
Click to expand...
Click to collapse
Appreciate the response, but I mentioned in my post that I have stock recovery. Not CWM or TWRP. No dice for me
datdude_tc said:
Appreciate the response, but I mentioned in my post that I have stock recovery. Not CWM or TWRP. No dice for me
Click to expand...
Click to collapse
well how did you flash mahdi? anyways do a adb push through stock recovery.
podagee said:
well how did you flash mahdi? anyways do a adb push through stock recovery.
Click to expand...
Click to collapse
So adb is accessible through stock recovery? I hold down+power until the LG logo, then release both, and press both again. This takes me to hard reset menu, not recovery. I press power three times, the andriod guy appears with a progress bar (i think it is attempting to factory reset here) and then it reboots. Everything I seem to find on Google/XDA indicates the only way to access a recovery mode is through a custom recovery.
If it's really this simple I'm going to flip.......ha
datdude_tc said:
So adb is accessible through stock recovery? I hold down+power until the LG logo, then release both, and press both again. This takes me to hard reset menu, not recovery. I press power three times, the andriod guy appears with a progress bar (i think it is attempting to factory reset here) and then it reboots. Everything I seem to find on Google/XDA indicates the only way to access a recovery mode is through a custom recovery.
If it's really this simple I'm going to flip.......ha
Click to expand...
Click to collapse
there is a recovery menu even through stock that you can reach. not sure how to get there except through your phone being on in the kk ui. i will try looking around. kinda busy at work so if i dont respond quickly im sorry. in the mean time try again through lgflashtool. make sure your sim card is out when doing it
---------- Post added at 10:46 AM ---------- Previous post was at 10:33 AM ----------
how did you get stock recovery back on your phone?
hello i have a rooted photonQ no roms installed and wifi stopped working.wife was playing with phone and did some update on motorola update and now phone reboots to recovery asking to install update and when i click on yes gives failed update and i reboot into phone and when i access it it boots me back to recovery asking me to install update..can someone please help me..
Do you have a custom recovery installed as well...?
I know you said you are rooted... if you have a custom recovery you can try doing a factory reset, may fix the issue - note you will lose any user settings and data/apps.
If you are on stock recovery, I'm not sure what the issue would be - you "should" be able to take OTA's using stock recovery. You cannot take OTA's if you are on a custom recovery.
i followed this guide to root photon....http://theunlockr.com/2012/09/07/how-to-root-the-motorola-photon-q-4g-smartphone/
Cheony81 said:
i followed this guide to root photon....http://theunlockr.com/2012/09/07/how-to-root-the-motorola-photon-q-4g-smartphone/
Click to expand...
Click to collapse
Looks like that site has you flash CWM, so your answer would be "yes"....
In which case you can't take OTA's. You should be able to restore your backup in CWM, which I'm wondering if you took...?
If you don't have a backup, you can try doing a factory reset and booting... otherwise you might have to completely reset the device using a FXZ file and RSD Lite.
http://forum.xda-developers.com/showthread.php?t=2095536
lol yea forgot to do a back up...so would i need to do a factory reset in recovery? or FXZ file and RSD Lite
Cheony81 said:
lol yea forgot to do a back up...so would i need to do a factory reset in recovery? or FXZ file and RSD Lite
Click to expand...
Click to collapse
I would start with factory reset, then move to RSD if you still have issues.
Start with the least painful, and move to the most.
ok so in recovery do a factory reset? if factory doesnt work for instance, what are the instructions to use RSD
Cheony81 said:
ok so in recovery do a factory reset?
Click to expand...
Click to collapse
Yep.
ok didnt work guess we going to have to try RSD..now phone just stuck on android screen..
sorry for double posting..
So what's the issue? Where are you at? Did you have issues flashing back to stock with RSD?
ok i did the factory restore like you stated last night and now just stays at android screen..i am able to get back in to recovery but thats it..and rsd doesnt pick up device..
Cheony81 said:
ok i did the factory restore like you stated last night and now just stays at android screen..i am able to get back in to recovery but thats it..and rsd doesnt pick up device..
Click to expand...
Click to collapse
Try putting the phone into fastboot mode, and see if RSD picks up the device then.
I believe if you turn off the device, and turn it back on holding the camera button you'll get some boot options.
ok went into fastboot and click on fastboot and phone just rebooted and now its just on the warning bootloader unlocked..
Cheony81 said:
ok went into fastboot and click on fastboot and phone just rebooted and now its just on the warning bootloader unlocked..
Click to expand...
Click to collapse
So you hold power + vol down until the phone shuts off. Then hold power + camera (quickly) after it shuts down. It should turn on to a menu, hit volume down until you select "AP Fastboot". Then vol up selects, and you should see the AP Fastboot Flash Mode screen...
Thank you so much ok I'm there now..there might just be a lite at end of tunnel..what do I do now
Cheony81 said:
Thank you so much ok I'm there now..there might just be a lite at end of tunnel..what do I do now
Click to expand...
Click to collapse
Try seeing if the phone is detected in RSD Lite, follow the directions in that thread to adjust the XML file provided and try to flash back to stock.
ok i opened up rsdd lite and in description on bottom model says fastboot ASANTI_CS, and in box on top device properties says n/a..
Cheony81 said:
ok i opened up rsdd lite and in description on bottom model says fastboot ASANTI_CS, and in box on top device properties says n/a..
Click to expand...
Click to collapse
Did you go through the process of adjusting the XML and attempt flashing and it failed or...?
ok went here and got file. http://sbf.droid-developers.org/phone.php?device=3
for sprint,once downloaded open up rsd lite and clicked on the 3 dots and located file and uncompressed.then ran it and got error flash..failed flashing process.failed flashing process.unknown fastboot command (getvar) phone connected
I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.
atomkrieg said:
I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.
Click to expand...
Click to collapse
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk
soupysoup said:
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.
atomkrieg said:
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.
Click to expand...
Click to collapse
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk
soupysoup said:
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
in the end fastboot, since i coulndt see how i could copy the img over to install via twrp
im pretty sure the button is fine, since it was cycling from the ota update install, then was working fine unlocking the bootloader, but after the flash, it crapped the bed.
Different problem
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go
siddhu007 said:
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go
Click to expand...
Click to collapse
ok, took it into a shop, got the power button fixed. It must have been on the way out because literally one minute it worked and the second it didnt. now i think ive got it narrowed down. it's saying it's unable to mount /persist. ive tried the various fixes:
e2fsck/dev/block/platform/msm_sdcc.1/by-name/persist
and
make_ext4fs/dev/block/platform/msm_sdcc.1/by-name/persist
but all i get is a not found error. not sure what to do from here on.
success!! i ended up stumbling on a bit how to restore the persist partition i didnt try. got a custom rom installs and everything works. thanks to everyone who tried to help!!
stuck in bootloop while flashing cataclysm rom
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..
When it was stuck in the loop, I had to hold vol up and down with the power button (wait a few secs until it was completely off) then reboot holding down + power till it opened the bootloader. if that doesnt work, try reflashing the bootloader via fastboot. I only found out i couldnt mount the persist partition by looking at the terminal window in twrp after trying to install a rom which kept it in the boot loop. I then used the cmd: make_ext4fs /dev/block/platform/msm_sdcc.1/by-name/persist to rebuild it.
jpau11 said:
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..
Click to expand...
Click to collapse
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.
audit13 said:
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.
Click to expand...
Click to collapse
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!
jpau11 said:
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!
Click to expand...
Click to collapse
Great to hear it. Congratulations:good:
Hi,
I have modified the system/etc/media_profiles.xml (added a new codec profile) and after that my S8+ is stuck at the flashing Samsung logo.
Unfortunately holding down Volume Up+Bixby+Power does nothing.
If I hold volume down+power then it reboots but again stuck at Samsung logo.
My phone has the latest Nougat (Renovate Ice 7.1 with SuperSU and TWRP).
Please help what can I do?
dragsterman said:
Hi,
I have modified the system/etc/media_profiles.xml (added a new codec profile) and after that my S8+ is stuck at the flashing Samsung logo.
Unfortunately holding down Volume Up+Bixby+Power does nothing.
If I hold volume down+power then it reboots but again stuck at Samsung logo.
My phone has the latest Nougat (Renovate Ice 7.1 with SuperSU and TWRP).
Please help what can I do?
Click to expand...
Click to collapse
If you cannot get into recovery which that shouldnt mess with it
The only other option would be to boot to dl mode and reflash stock firmware
TheMadScientist said:
If you cannot get into recovery which that shouldnt mess with it
The only other option would be to boot to dl mode and reflash stock firmware
Click to expand...
Click to collapse
I have not touched TWRP recovery I only modified system/etc/media_profiles.xml
How can I bcakup my internal storage now?
dragsterman said:
I have not touched TWRP recovery I only modified system/etc/media_profiles.xml
How can I bcakup my internal storage now?
Click to expand...
Click to collapse
You should still be able to reboot to twrp maybe your timing is off or something modding that file wouldnt hurt twrp
I dont know if there really is a way to backup now without recovery
dragsterman said:
I have not touched TWRP recovery I only modified system/etc/media_profiles.xml
How can I bcakup my internal storage now?
Click to expand...
Click to collapse
My recovery was working fine yesterday. I only did a backup with it.
dragsterman said:
My recovery was working fine yesterday. I only did a backup with it.
Click to expand...
Click to collapse
I own a snap dragon so i dont know the exacts
But if its like before you might try reflashing twrp in odin or how its down then booting to it and restore system from there
TheMadScientist said:
You should still be able to reboot to twrp maybe your timing is off or something modding that file wouldnt hurt twrp
I dont know if there really is a way to backup now without recovery
Click to expand...
Click to collapse
What is timing?
I pressing Bixby+VolUP+Power about 20 sec while on Samsung logo and nothing.
STRANGE that if I only press Power it vibrates two times but nothing happens.
What could this could be?
dragsterman said:
What is timing?
I pressing Bixby+VolUP+Power about 20 sec while on Samsung logo and nothing.
STRANGE that if I only press Power it vibrates two times but nothing happens.
What could this could be?
Click to expand...
Click to collapse
Could be a kernel panik trying to happen Please mind the language:good:
TheMadScientist said:
Could be a kernel panik trying to happen Please mind the language:good:
Click to expand...
Click to collapse
Sorry I am just very upset now.
I can not go to DL mode also.
While on Samsing logo I am pressing VolDown+Bixby+Power and nothing happens.
Should I connect to PC while doing this?
dragsterman said:
Sorry I am just very upset now.
I can not go to DL mode also.
While on Samsing logo I am pressing VolDown+Bixby+Power and nothing happens.
Should I connect to PC while doing this?
Click to expand...
Click to collapse
do the button combo until it reboots and keep holding it If you are uick enough the second it shuts down try to switch to vol up combo
TheMadScientist said:
do the button combo until it reboots and keep holding it If you are uick enough the second it shuts down try to switch to vol up combo
Click to expand...
Click to collapse
Now I managed to get in to DL mode. (lots of tries)
I am on the warning screen.
Now how can I go to recovery? I do not have a PC right now with installed drivers, etc.
I am sure my recovery is fine so that would be the simpliest.
dragsterman said:
Now I managed to get in to DL mode. (lots of tries)
I am on the warning screen.
Now how can I go to recovery? I do not have a PC right now with installed drivers, etc.
I am sure my recovery is fine so that would be the simpliest.
Click to expand...
Click to collapse
Now boot do the reboot combo like you are trying to reboot to dl mode as so as the screen shuts off swap to bixby vol up nd power hold it for upto 10 sec
TheMadScientist said:
Now boot do the reboot combo like you are trying to reboot to dl mode as so as the screen shuts off swap to bixby vol up nd power hold it for upto 10 sec
Click to expand...
Click to collapse
Thanks man, it worked I am in TWRP now.
You saved my day!
BTW why could this media_profile.xml mess up my system?
I added a new video profile to this file to enable 4k video recording to third party apps.
I did the right syntax so WHY could this file do harm to my system?
dragsterman said:
Thanks man, it worked I am in TWRP now.
You saved my day!
BTW why could this media_profile.xml mess up my system?
I added a new video profile to this file to enable 4k video recording to third party apps.
I did the right syntax so WHY could this file do harm to my system?
Click to expand...
Click to collapse
Im not sure why it did
But now you can restore just system and should be good
TheMadScientist said:
Im not sure why it did
But now you can restore just system and should be good
Click to expand...
Click to collapse
Not so easy my TWRP backup is on my pc far away from me.
BUT I has this original media_profiles.xml on my sdcard.
Only problem that in TWRP file manager my system folder doesnt show any directory just the "bin" directory so I can not paste my media_profiles file.
How can I solve this?
I am sure my system files is there, because a few days ago I also wanted to copy a file with TWRP file manager to the system folder but also did not show just the "bin" directory.
dragsterman said:
Not so easy my TWRP backup is on my pc far away from me.
BUT I has this original media_profiles.xml on my sdcard.
Only problem that in TWRP file manager my system folder doesnt show any directory just the "bin" directory so I can not paste my media_profiles file.
How can I solve this?
I am sure my system files is there, because a few days ago I also wanted to copy a file with TWRP file manager to the system folder but also did not show just the "bin" directory.
Click to expand...
Click to collapse
That I do not know I havnt worked with twrp in quite some time
TheMadScientist said:
That I do not know I havnt worked with twrp in quite some time
Click to expand...
Click to collapse
I had to mount system.