have lineage oreo for S2 9100 , and 9300????
download links Do you have to note 2 oreo
It would be smarter to build Android Oreo Go,unfortunately no I do not have the experience to do it but it is just a suggestion.
GO SGS3
Dinkec27 said:
It would be smarter to build Android Oreo Go,unfortunately no I do not have the experience to do it but it is just a suggestion.
Click to expand...
Click to collapse
Totally agree! Read about this somewhere recently, it seems like the best option for our older devices. And Yes! No notion of how to do it but perhaps some nice adventurous Dev will take up the torch.
We need supporting kernel man!
hishamnoobie said:
We need supporting kernel man!
Click to expand...
Click to collapse
fourkbomb is working on a new kernel for i9300, named midas. Just wait,won't be long time.https://github.com/fourkbomb/linux
That's great news. Does someone maybe know the current status of the development?
Ok, I just found this: https://blog.forkwhiletrue.me/pages/roadmap/
aureliomilitao said:
have lineage oreo for S2 9100 , and 9300????
Click to expand...
Click to collapse
i think that someone is developing lineage 15.1 for our beloved device
here's the link- https://forum.xda-developers.com/ga...14-1-i9300-t3544531/post76226256#post76226256
Any news?
PLHokus said:
Any news?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks like it's coming along nicely with a lineage-15.1 branch https://github.com/fourkbomb/android_device_samsung_midas
Sly Fox007 said:
Looks like it's coming along nicely with a lineage-15.1 branch https://github.com/fourkbomb/android_device_samsung_midas
Click to expand...
Click to collapse
that is for all s3 versions or only i9300 ?
hasan.sy said:
that is for all s3 versions or only i9300 ?
Click to expand...
Click to collapse
""Midas" is the codename for the family of boards consisting of the Galaxy S3 (GT-I9300, GT-I9305, SHV-E210K/L/S) and the Galaxy Note 2 (GT-N7100, GT-N7105)." from https://blog.forkwhiletrue.me/pages/midas-mainline/
when did this project will finish am waiting...... for my devices gt-i9305
Someone can always try to transform the S3 into treble compatible so that everyone can then try to use the GSI Treble roms at least to breath some live back into the S3
Here's an update on the development: https://blog.forkwhiletrue.me/posts/an-almost-fully-libre-galaxy-s3/ It's not for Oreo development specifically but it's about u-boot and the kernel.
Sly Fox007 said:
Here's an update on the development: https://blog.forkwhiletrue.me/posts/an-almost-fully-libre-galaxy-s3/ It's not for Oreo development specifically but it's about u-boot and the kernel.
Click to expand...
Click to collapse
the device tree for s3 on los15.1 already prepeared here.but midas still not perfect which needs a lot skills to run.so no body build a rom to try…(excepet the author)
https://github.com/fourkbomb/android_device_samsung_midas
mountainguan said:
the device tree for s3 on los15.1 already prepeared here.but midas still not perfect which needs a lot skills to run.so no body build a rom to try…(excepet the author)
https://github.com/fourkbomb/android_device_samsung_midas
Click to expand...
Click to collapse
how to install this kernel to devices any idea about it
pandeyshreedhar said:
how to install this kernel to devices any idea about it
Click to expand...
Click to collapse
It's not ready for anything but booting linux. If you really want to try it out, instructions are at the bottom of the page.
Try it yourself
If you're after something to tinker with, have a spare GT-I9300/GT-I9305/GT-N7100/GT-N7105 lying around, and don't really care about using anything based on the old kernel (be that LineageOS, Replicant, or the stock firmware), you can even try this for yourself. While it should be possible to go back to the proprietary bootloader, I have not tested doing so: doing this would be left largely as an exercise to the reader. It's also worth mentioning that LineageOS/Replicant will boot under u-boot with a kernel compiled without CONFIG_ARM_TRUSTZONE set, but the display will not work (probably because u-boot does not initialise the display).
...
Click to expand...
Click to collapse
Hi all,
I guess we can expect Oreo ROM for our s3 by using a method called MicroG which galaxy s2 also uses the same structure for supporting lineage 15. Or we can port los 15 from galaxy s2 because both the offer a similar kernel version.
Cheers if anyone tries to build los 15 for our device using the given info..
( Note: the given info might be correct according to a dev that I've confirmed.)
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey Community, so far there was no device tree for the combination tilapia/cm10.2 so i decided to do my own one as i still have tilapia and want to compile cm / cm based roms from source for it. So here it is.
Here u can download the ROM:
CM_10.2_200920_unofficial
Here u can download the GAPPS for 4.3: LINK
Device TREE :https://github.com/n3ocort3x/android_device_asus_tilapia
CHANGELOG (grouper, as no tilapia is official) :http://10.2.cmxlog.com/?device=grouper
Its tested and working. So lets enjoy JB4.3. I will build every now and then and update thread title. I cant say how often i will build at week, but I will.
Credits:
CyanogenMod Team (of course)
@LorD ClockaN
@maxwen
@TUN_SD
@semdoc
for always supporting me
another one.. just in case
Live long and prosper here.
Is it possible to enable Bluetooth-Tethering for the CM10.2 tilapia builds? On 10.1 this is not available and I don't know if this is a technical limitation or just a "forgotten" feature that needs to be enabled for tilapia devices.
Well done m8!
Sent from my Nexus 7 GSM using Tapatalk 4
Good to now that someone has been able to build to tilapia , 5 minutes ago i has able to make a bootable build also . Already a month that i was trying (I'm not a developer ) .I used the 10.1 device tree with the 4.3 bloobs that i download from the aosp tree.
Installed and it's working like a charm!
Thank you!
Did anyone already tried to flash this over an official 10.1 build? Did your device catch fire or could you continue without a factory reset?
Yes please is any wipe needed or just flashing Rom and gapps?
Sent from my Nexus 7 using xda app-developers app
Ask for rom
what different of cm-10.2-20130901-UNOFFICIAL-tilapia.zip and cm-10.2_tilapia_unofficial_ncx_3108.zip
and what i should to install?
Thanks for your efforts n3ocort3x, much appreciated.
ganjar1989 said:
what different of cm-10.2-20130901-UNOFFICIAL-tilapia.zip and cm-10.2_tilapia_unofficial_ncx_3108.zip
and what i should to install?
Click to expand...
Click to collapse
The first one seems to be from RBMacGregor - that one hasn't been updated for almost a month now and some features seem to not work there, as users reported. The second is from this thread - more recent one and seems to work okay, so I guess safe to install
I do like CM so I flashed it today and haven't as yet found anything untowards. Thanks OP for it.
n3ocort3x said:
Hey Community, so far there was no device tree for the combination tilapia/cm10.2 so i decided to do my own one as i still have tilapia and want to compile cm / cm based roms from source from it. So here it is.
Here u can download the ROM: CM_10.2_010913_unofficial
Here u can download the GAPPS for 4.3: LINK
Device TREE : coming soon today (just needs more cosmetical attention before i push to gerrit)
Its tested and working. So lets enjoy JB4.3. I will build every now and then and update thread title. I cant say how often i will build at week, but I will.
Click to expand...
Click to collapse
its safe a dirty flash?
Fatal1ty_18_RUS said:
The first one seems to be from RBMacGregor - that one hasn't been updated for almost a month now and some features seem to not work there, as users reported. The second is from this thread - more recent one and seems to work okay, so I guess safe to install
Click to expand...
Click to collapse
nope i deleted it... the first one was mine from yesterday with some testing stuff...
Device tree is up here now:
https://github.com/n3ocort3x/android_device_asus_tilapia
Do I have to flash a new bootloader / radio to switch from 10.1 to 10.2?
Sent from my Nexus 4 using Tapatalk 4
LordDeath said:
Did anyone already tried to flash this over an official 10.1 build? Did your device catch fire or could you continue without a factory reset?
Click to expand...
Click to collapse
I've tried with no luck. A factory reset helped.
cithrix said:
Do I have to flash a new bootloader / radio to switch from 10.1 to 10.2?
Click to expand...
Click to collapse
You shouldn't have to, but I would do it anyway. Luckily we have a nice sticky thread about that: http://forum.xda-developers.com/showthread.php?t=2175086
Currently we don't have vendor blobs and other external repos for tilapia. From where u sync the repos? Slim? Or?
Can u list what/where the repos in your local manifest?
Thanks
Are you guys going to merge your changes with the official CM repos or are you going to maintain your own unofficial builds?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is Evervolv?
Evervolv is an AOSP (Android Open Source Project) rom. We're fully open sourced and encourage it with no restrictions. The work put into this rom is community driven and and Evervolv Project is made up of numerous members and contributors. And this whole time we were receiving 4.3 nightlies
Right now the current source we are working on is Jellybean (Android 4.3.x).
Current version: 3.3.0p1
Nightlies (starting 8.28.2013) available for testing. Once issues are re mediated, a release build will be posted.
Pre-Requisites:
1. CWM or TWRP
2. S-Off, or thorough understanding of how you work around S-On to get the kernel included in this ROM flashed. FAUX, CM kernels are not compatible and will result in functionality issues if it boots at all.
3. Desire to be helpful in an appropriate manner. Logcats, dmesgs, etc are very helpful, and necessary to assist.
4. Full data wipe/factory reset
Downloads:
http://www.evervolv.com/devices/speedy - Named "ev_speedy-nightly-2013.xx.xx-squished.zip"
This requires gapps for 4.3, do not use 4.2 gapps.
Where do we get the GApps?
Edit: I got them from HERE. 20130813
Edit2: Wow this works great right out of the box! Nightly 10-2
thanks, runs great so far. only issue i see right now is i cant take screenshots, keeps telling me storage might be in use but its not.
Confirmed on my end. Screenshot isn't working for me either. I'll try to get a logcat later tonight.
Here is the logcat I got when attempting to get a screen shot. I hope this helps.
It's an issue across a couple of msm7x30 devices. glacier being another one
elginsk8r said:
It's an issue across a couple of msm7x30 devices. glacier being another one
Click to expand...
Click to collapse
Glad to see this device still kicking!
I'm hoping to port some roms, need testers
Zpik said:
I'm hoping to port some roms, need testers
Click to expand...
Click to collapse
im probably one of only a few left using it but you can inbox me roms and ill try when i can
Still on the shift
Sent...
-somebody- said:
im probably one of only a few left using it but you can inbox me roms and ill try when i can
Click to expand...
Click to collapse
sure! I'll start tonight, but what you guys want? How about trying a cm10.2 backport?
Zpik said:
sure! I'll start tonight, but what you guys want? How about trying a cm10.2 backport?
Click to expand...
Click to collapse
sure, at this point i havent even been paying attention to what other phones are getting cause i cant escape the shift. if cm 10.2 was where they implemented more privacy from information grabbing apps then my answer is most definitely.
-somebody- said:
sure, at this point i havent even been paying attention to what other phones are getting cause i cant escape the shift. if cm 10.2 was where they implemented more privacy from information grabbing apps then my answer is most definitely.
Click to expand...
Click to collapse
Im on it, I pm you in a little while
How about source built instead
CNexus said:
How about source built instead
Click to expand...
Click to collapse
dont got ubuntu:silly:
uploading a build now.
I meant me
I have access to a build server :thumbup:
CNexus said:
I meant me
I have access to a build server :thumbup:
Click to expand...
Click to collapse
hect yeah go for it! It may come out more stable
ParanoidKang said:
hect yeah go for it! It may come out more stable
Click to expand...
Click to collapse
Syncing source now, I'll change the evervolv setup for CM tomorrow..
CNexus said:
Syncing source now, I'll change the evervolv setup for CM tomorrow..
Click to expand...
Click to collapse
I got a port test if anyone wants to try. And keep up the good work cnexus
Snap Camera Mod
Snap is the new camera apps included in nightly of cyanogenmod, replacing the camera AOSP used so far.
This camera, based on Qualcomm's Snapdragon room, although doesn't offer all the advanced features of the latter offers a shot much faster compared to the camera AOSP, and even Google camera.
If you want to try it, here you will find an APK installable on many smartphone with Lollipop or marshmallows.
Since the camera uses libraries which are not present on all smartphones (NOW LIBS ARE INTO APK), however, does not mean that it functions: should go smoothly on all ROMS based on cyan, but also on AOSP and other.
If you try it, reported below which device you have been successful (or not).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LINK V3
MY VERSION CHANGELOG:
V2:
- Added libs into apk
- Fix crash in panoramic mode
BUGS:
problem with arm64 device (I not have a arm64 device yet )
SCREENSHOT:
CREDITS:
Cyanogenmod team
Code aurora forum
Guessing it only works on CM? Crashes on my 6P running PureNexus.
Does not work in 6p (pure nexus)
Only installing the APK will not work on some devices.
Snap needs special compiled libs to work.
Juzman said:
Guessing it only works on CM? Crashes on my 6P running PureNexus.
Click to expand...
Click to collapse
R-Jerry said:
Does not work in 6p (pure nexus)
Click to expand...
Click to collapse
Work in all arm device
Trafalgar Square said:
Only installing the APK will not work on some devices.
Snap needs special compiled libs to work.
Click to expand...
Click to collapse
Guessing this is why.
Ninnix96 said:
Work in all arm device
Click to expand...
Click to collapse
Strange. Not working on Nexus 6P which is arm64.
Juzman said:
Strange. Not working on Nexus 6P which is arm64.
Click to expand...
Click to collapse
The 6p is arm64...
Ninnix96 said:
6p is arm64...
Click to expand...
Click to collapse
So arm only, not arm64.
Works on Xperia Z1.
SD800(arm)
Lollipop 5.1.1
No extra libs
Doesnt work on Nexus 4 (arm) PureNexus
Not working on cm13nightly sprout4
Sent from my sprout4 using XDA Labs
phpbb3 said:
Doesnt work on Nexus 4 (arm) PureNexus
Click to expand...
Click to collapse
Whats your ROM?
Ninnix96 said:
Whats your ROM?
Click to expand...
Click to collapse
As he said:
PureNexus
Trafalgar Square said:
As he said:
PureNexus
Click to expand...
Click to collapse
You have tried with libs?
Ninnix96 said:
tested on many lollipop and mashmallow devices
Click to expand...
Click to collapse
let me guess, only "many" devices running CyanogenMOD?
matgras said:
let me guess, only "many" devices running CyanogenMOD?
Click to expand...
Click to collapse
No work on huawai and Samsung with emuUI or touchwiz and other
Ninnix96 said:
No work on huawai and Samsung with emuUI e touchwiz and other
Click to expand...
Click to collapse
Doesn't seem to work on AOSP either, you might want to add in the OP that it only works on CM (based) roms
matgras said:
Doesn't seem to work on AOSP either, you might want to add in the OP that it only works on CM (based) roms
Click to expand...
Click to collapse
Huawai y6 stock with nova , work perfect
What's the difference between this camera and the one that comes in the nightlies?
Will the enhancements work on all SnapDragon processor variants or only for the 800 and above? What about the lib files, are they needed for devices originally without the snapdragon camera??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Google Pixel 4 XL
Code:
- Your warranty is now void.
- You have been warned.
- Use at your own risk.
Introduction:
This is the Official Lineage OS 20 thread for the Google Pixel 4 XL.
Downloads:
Please follow the install instructions in your device's Wiki page linked below exactly, and make sure your device's firmware matches the required firmware listed.
coral - Official builds
coral - My unofficial with Google Apps/Pixel goodies included. Passes SafetyNet by default. OTA's roll roughly once a month. Support not guaranteed or implied.
If you don't follow these instructions, or use 3rd party add-ons (like Magisk) please don't expect support here.
Known Bugs:
None.
Find any? Report them according to this guide.
Notes:
The only supported GApps package at the moment is MindTheGapps, linked on our Wiki page about gapps.
Firmware is shipped in the ROM package for this device, so no need to worry about updating it on your own!
Kernel Source: https://github.com/LineageOS/android_kernel_google_msm-4.14
Rom super smooth
lineage-20.0-20221031-dtb-coral.img this need to flash and how?
also and dtbo need to flash?
thanks
Probably not the right place to ask but does lineageos plan on supporting wireguard in kernel? I use it for remote access and having kernel support is way more efficient.
bm1170 said:
Probably not the right place to ask but does lineageos plan on supporting wireguard in kernel? I use it for remote access and having kernel support is way more efficient.
Click to expand...
Click to collapse
on actively supported pixels probably not?
What mainline version was fireguard merged in? Because we enable it on those.
npjohnson said:
on actively supported pixels probably not?
What mainline version was fireguard merged in? Because we enable it on those.
Click to expand...
Click to collapse
Looks like 4.19 and newer has wireguard on stock. I'm on 4.14 on lineageos 19.1 right now and do not have support.
Edit: I'm dumb the kernel version is listed above.
bm1170 said:
Looks like 4.19 and newer has wireguard on stock. I'm on 4.14 on lineageos 19.1 right now and do not have support. Do you have any way of knowing or can someone running the 20 build above chime in and list the kernel version?
Click to expand...
Click to collapse
It's still 4.14. can't be changed.
Thank you for the rom. Can you name the pixel goodies included on your unofficial build?
Face unlock feature doesn't work???
Does it support e-sim?
theageofjupiter said:
Does it support e-sim?
Click to expand...
Click to collapse
Yes
npjohnson said:
Google Pixel 4 XL
Click to expand...
Click to collapse
Right on! Thanks NPJohnson! I will definitely be testing official and unofficial in time!
son_91 said:
Face unlock feature doesn't work???
Click to expand...
Click to collapse
It does, but I have a small glitch in the lock screen if I have the face unlock option turned on
Can you add " adaptive changing" feature to this ROM?
Thanks,
Dtb file what is it? I need to flash it and how?
pandemo_96 said:
Dtb file what is it? I need to flash it and how?
Click to expand...
Click to collapse
No. You should follow this instruction.
Tony Ronaldo Matute said:
It does, but I have a small glitch in the lock screen if I have the face unlock option turned on
Click to expand...
Click to collapse
I think that the Pixel launcher has a problem. I'm using the Nova launcher, and it's working.
son_91 said:
I think that the Pixel launcher has a problem. I'm using the Nova launcher, and it's working.
Click to expand...
Click to collapse
Thanks for letting me know, I'll try to change my launcher
son_91 said:
I think that the Pixel launcher has a problem. I'm using the Nova launcher, and it's working.
Click to expand...
Click to collapse
build with fix is in the works.
RisingOS for the Google Pixel 7/7 Pro [pantah]
What is RisingOS?
* risingOS is An OpenSource Aftermarket Android Operating System that aims to deliver unique and refreshing android experience..
Based on Android 13 QPR2
Screen Shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Whats working?
Everything I know of
Known issues
Nothing yet
You tell me
Downloads
*FASTBOOT METHODS*
Required platform-tools 33.*.*
(Stay away from 34.*.* as it gives an error)
*Cheetah*
risingOS-v1.1-Babylon-202306172142-cheetah-GAPPS-OFFICIAL-fastboot.zip
*Panther*
risingOS-v1.1-Babylon-202306180124-panther-GAPPS-OFFICIAL-fastboot.zip
Install Instructions
Reboot to bootloader
fastboot update 'path to downloaded zip file'
Data wipe can be done by adding -w (fastboot update -w 'path to downloaded zip file')
Android OS version: 13.0.0_r45
Security patch level: May 5, 2023
Build Device Maintainer: Niv
Kernel Source code: Source
Source code: https://github.com/risingTechOSS
ROM Developer: minaripenguin
Changelog: coming soon
Telegram Chat: RisingOS Pixels
Runs very well, can only recommend this ROM
I'm sorry, what is "unique and refreshing" about this ROM? Screens do look nice, but...
So far very good and stable rom. Thanks to Niv
gogoffm said:
So far very good and stable rom. Thanks to Niv
Click to expand...
Click to collapse
Just a breath of fresh air!
Is this 32 bit compatible by chance too?
Or only 64 bit.
jgrubbs said:
Is this 32 bit compatible by chance too?
Or only 64 bit.
Click to expand...
Click to collapse
Only 64
О_о Babylyon v.1.1 ?!
I'm already downloading))
RisingOS v1.1 runs great. Thanks for the update
just started running this rom today but so far everything buttery smooth no random app not respondings no hang ups, just buttery smooth with some of the most customization ive ever seen in a rom hands down. even brought back quick settings bg images! man i missed those. and the little things it does like theming for the settings app and the image header in setting options.. or the quick settings icon animations.. now THIS deserves the name CUSTOM rom, unlike most builds nowadays are just GSI's with a couple copypasta options in it.. MAJOR props to the dev for this rom i think ill stay a while.. One opinion on the post here on xda; you need a features list.. i mean it would really suck to type the extensive list out, but if people could see the amount of hard work put in, this rom would blow up so quick.
regardless, it's gonna blow up.. So excited to check this ROM out further! Thanks again.
wrong thread.sorry
Thank you Nivla, Rom is running great.
Anyone using AA with this rom. It doesn't connect with my headset.
Does this ROM support custom kernels?
jake.99x3 said:
Does this ROM support custom kernels?
Click to expand...
Click to collapse
Using Kiri kernel rn without any issues
yurishouse said:
Using Kiri kernel rn without any issues
Click to expand...
Click to collapse
Yes using radioactive ☢
Running sultan kernel..
Working flawlessly
cultofluna said:
Running sultan kernel..
Working flawlessly
Click to expand...
Click to collapse
Mind linking the download link for Sultan kernel?
Pixel86 said:
Mind linking the download link for Sultan kernel?
Click to expand...
Click to collapse
Still on testing currently
Will be published soon
Been running the whole day and it's super stable. Customizations are just enough to satisfy what I need.