Related
Hey so I was wondering if I could keep my root after installing the default os or something similar.
So I rooted my phone with a custom OS and it worked all fine. I then logged into my google account and worked fine. I restarted my phone and then at the top it just says Custom Binary blocked by FRP.
I have fixed it so I can use it but I was wondering if I could root it and then remove it somehow? That was the only issue I was having when I did that. Rooting worked and everything just I need to know a way to either delete FRP or Get around it where I won't see it again. Hopefully this makes some sense.
Android Version: 6.0.1
Model Number: SM-G920P
Phone: Samsung Galaxy S6
If you need anymore info let me know.
XDA Visitor said:
Hey so I was wondering if I could keep my root after installing the default os or something similar.
So I rooted my phone with a custom OS and it worked all fine. I then logged into my google account and worked fine. I restarted my phone and then at the top it just says Custom Binary blocked by FRP.
I have fixed it so I can use it but I was wondering if I could root it and then remove it somehow? That was the only issue I was having when I did that. Rooting worked and everything just I need to know a way to either delete FRP or Get around it where I won't see it again. Hopefully this makes some sense.
Android Version: 6.0.1
Model Number: SM-G920P
Phone: Samsung Galaxy S6
If you need anymore info let me know.
Click to expand...
Click to collapse
Greetings and welcome to assist. This is for the edge variant but the principal is the same, you need to turn off OEM lock
https://forum.xda-developers.com/s6-edge-plus/help/root-s6-edge-custom-binary-blocked-frp-t3400416
Good luck
Sawdoctor
Hi guys,
I just bought a Samsung Galaxy S7 SM-G930W8 via Ebay but unfortunately it is FRP locked. I know how to bypass the FRP but Android 6.0.1 needs to be installed and as it seems to me Android 7 is installed on it. I downloaded the original 6.0.1 firmware from Samfirmware for the SM-G930W8 but Odin gives a notification "system rev check fail device 1 binary 0". It seems that one gets this notification when trying to install an incorrect original firmware. The problem is that I cannot retrieve any info from the device because of the FRP lock (cannot get into device info).
Is there a way to find out which firmware is installed on it right now so I can download and install the correct 6.0.1 firmware?
try Phone Info Samsung
enrique54 said:
try Phone Info Samsung
Click to expand...
Click to collapse
people need to try start reading posts........
My device is FRP locked
People need to post in the right section to begin with...
sanderh said:
people need to try start reading posts........
My device is FRP locked
Click to expand...
Click to collapse
Easy fix use Odin to downgrade firmware bypass the FRP lock then set phone up to your Gmail etc... Then upgrade I done it before to a FRP locked S7 edge and was pretty easy to do
Sent from my SM-G930F using Tapatalk
I've looked for quite a while on anything that could help me root the phone, and have had no success with anything. I'm worrying at this point that the bootloader is just locked and have to ask, is there anything else I can do to root this phone? Willing to try pretty much anything, even at risk of bricking it.
Lavitz324 said:
I've looked for quite a while on anything that could help me root the phone, and have had no success with anything. I'm worrying at this point that the bootloader is just locked and have to ask, is there anything else I can do to root this phone? Willing to try pretty much anything, even at risk of bricking it.
Click to expand...
Click to collapse
I'm interested in this too but in all likelihood nobody with the knowledge is even working on it because this is a niche phone.
Locked bootloader..
Well i have this fone now...i bought it because it was a good deal so it seemed..Less than 100$ for fone and service activation plan...I have rooted just about every Samsung i have ever owned...So heres what i have come up with..There is no OEM option in Developer options...On any other samsung fone i always go right into developer options and disable OEM by turning it off...Then i either have used Kingroot apk or Kingoroot apk in the past and they have worked...sometimes u have to find the perfect version to match your android software specifically...Now i have always had huge success with Odin and flashing TWRP via Laptop or Computer via USB connection, but thats something each individual should personally take the time and educate theirselves on just in case... Sorry to say that the Samsung J3 Orbit with Total Wireless and Oreo 8.0 needs a serious look at...
Lavitz324 said:
I've looked for quite a while on anything that could help me root the phone, and have had no success with anything. I'm worrying at this point that the bootloader is just locked and have to ask, is there anything else I can do to root this phone? Willing to try pretty much anything, even at risk of bricking it.
Click to expand...
Click to collapse
Your phone is a 2018 model of the j3. When xda finally makes a J3 (2018) thread i will request for this thread to be moved. Any root methods shown in J3 (2017) are likely not to work anymore since samsung patched the methods used. The only way to root phones now is by buying the U variants of samsung's phones which are only available from samsung's website under unlocked phones. Unlocked phones from samsung have an unlocked bootloader by default.
thepcwiz101 said:
Your phone is a 2018 model of the j3. When xda finally makes a J3 (2018) thread i will request for this thread to be moved. Any root methods shown in J3 (2017) are likely not to work anymore since samsung patched the methods used. The only way to root phones now is by buying the U variants of samsung's phones which are only available from samsung's website under unlocked phones. Unlocked phones from samsung have an unlocked bootloader by default.
Click to expand...
Click to collapse
incorrect statement.
My s9+ is a U varient with no OEM unlock option and did not come from samsung. And my s9+ is still not rootable.
OuijaElite said:
incorrect statement.
My s9+ is a U varient with no OEM unlock option and did not come from samsung. And my s9+ is still not rootable.
Click to expand...
Click to collapse
strange. what is the model number.
thepcwiz101 said:
Your phone is a 2018 model of the j3. When xda finally makes a J3 (2018) thread i will request for this thread to be moved. Any root methods shown in J3 (2017) are likely not to work anymore since samsung patched the methods used. The only way to root phones now is by buying the U variants of samsung's phones which are only available from samsung's website under unlocked phones. Unlocked phones from samsung have an unlocked bootloader by default.
Click to expand...
Click to collapse
U models are normally U.S. models which are locked tight. I run a s8 as my everyday driver which is rooted. The s9 s10 and most other us snapdragon and in this case exynos all are locked tight. And they cannot be rooted as of right now. The sampwn and other samfail do not work anymore. The U model you are referring to is the U.S. sim unlocked model not bootloader. With the S series F is the European bootloader unlocked model I don't know the European letter for J series.
Until some one finds a way to push a rooted system img on stock permissive combination kernel root will not come just like s9 and s10 us models
If these where us snapdragon we could push a rooted system combination file with safestrap just like we do on the newer bootloader on s8 using EDL and Qualcomm 9008
Just had an idea, another thread on this forum a guy says he made a modified version of Odin that can flash mix matched models. So just flash a model version of the j3 orbit that can be rooted or at least oem unlock capable to be able to flash twrp and then be able to root through twrp.
If flashing a j3 with a model number different than sm-367vl would brick it, just extract the .img partitions like boot.img or whatever the partition may be with ubuntu to restore one by one until you find which one makes the phone boot.
I don't know much about phones when it comes to this depth of modification. But I had a lg zone 3 that used this method to turn an unrootable model number version into a different model number that was rootable. Before I flashed the .img partitions of the stock software the screen had lines all over it, so using screen mirroring I was able to root the different model number software then download partition backup and restore app them restore the partitions that were for the original model number.
So basically it took both model numbers and combined some partitions of each to make it work properly.
In my head I can totally see this working. Just depends on how close to the same hardware each model number of the galaxy j3 has i guess.
I wish I would have noticed/seen this a bit sooner.. any progress or luck? I have the j337u ...
I know chimera tool is able to remove Knox kglock oemlock rmm mdm , of which mine shows kglock on, oemlock: on, frplock off. Trying to flash anything gives the error insufficient payment somethin. So there's got to be a way around it. ALSO I found interesting, the FCC id has J337t instead of U ...wonder why that is ...
(Anyone know where I can get stock j260AZ/AIO -notpaid- (cricket) firmware,I've literally checked every where )
We need someone to take that new 0day exploit rootPoC mod it however and release it
Found this [Have not tried it yet]
Came across an article on androidbiits. Not sure it's actually viable. Unfortunately I cant post the direct link until I have enough posts under my belt.
I'm willing to pitch in if someone can point me in the right direction.
Yhuda
How now????You are find How to root this phone????Please add Develop for find How to root Samsung J3 Orbit?!??
For my kglock on, oem lock on j337u, which also has some new mdm / rmm on it from consumer , I used chimera tool to set KGLock to Complete.
This also switched the oem lock to off and show the toggle in Dev ops....
1st flash of magical patched img worked. But after.connectinf.the Wi-Fi , knox enrollment and instantly a sec. Msg popped up and locked up the entire device. No usb connection or.anything.
factory reset
Same Issue,.then locks up
So for try 3, flash the patched boot, let boot.
AS SOON AS ITboots to android, hit the Airplane Mode toggle to activate it to stop Knox Enrollmnt
So er.gont get
was able to unlock the boatloader with comb file that was compatible, flashed stock track phone, updated to 9 pie...
used a gig pressed power button ???
9 pie trac phone j3 orbit
patched AP file with majisk, ran with Odin : says noway fail, I was able to reflash with stock firmware, so it doesn't work on mine...
any other luck
thanks
I would really like to know if anyone has succeeded either rooting or SIM unlocking or flashing with a different firmware on this model.
I was able to access the OEM unlock in my J3 Orbit (SM-S367VL) via factory binary after flashing combination firmware.
That is as far as Ive gotten. I am assuming you would want to run ADB download mode to flash anything as factory binary seems to have some security measures against full bootloader unlock built in
Hi. I'm new here as a member, but I've found this site from my interest in rooting earlier this year. I'm aware of losing data and accidental bricking, and I've been searching for quite a while. I'm mostly interested to get rid of "bloatware" and remove ads. I currently don't know where or how to start, but I did start backing up files and data to keep. I also got SuperSU and Titanium Backup (and ADB installed on my computer).
I came across several pages of stuff, but I couldn't find anything recent/relevant. Links:
https://www.androidsage .com/2018/07/22/how-to-root-snapdragon-galaxy-s7-and-s7-edge-on-android-8-0-oreo/
https://www.howtogeek.com/115297/how-to-root-your-android-why-you-might-want-to/
https://www.howtogeek.com/239798/how-to-unlock-your-android-phones-bootloader-the-official-way/
https://www.howtogeek.com/240047/how-to-flash-twrp-recovery-on-your-android-phone/
https://www.howtogeek.com/240582/how-to-back-up-and-restore-your-android-phone-with-twrp/
https://www.techtalkies365.com/how-to-unlock-frp-of-your-samsung-phone/
TWRP for Samsung Galaxy S7 (Exynos)
[Recovery][Exynos] Official TWRP for Galaxy S7 (herolte)
[DISCUSSION][S7-SNAPDRAGON]Unlock Bootloader - R&D
If anyone can point me in the right direction, that would be helpful! I can use a PC (Windows 10) for doing part of the rooting process if necessary.
I'm using a Samsung Galaxy S7 with T-Mobile as the carrier. Model SM-G930T, version 8.0.0, and build number (just in case) R16NW.G930TUVSBCTA2.
pyereciae2788 said:
Hi. I'm new here as a member, but I've found this site from my interest in rooting earlier this year. I'm aware of losing data and accidental bricking, and I've been searching for quite a while. I'm mostly interested to get rid of "bloatware" and remove ads. I currently don't know where or how to start, but I did start backing up files and data to keep. I also got SuperSU and Titanium Backup (and ADB installed on my computer).
I came across several pages of stuff, but I couldn't find anything recent/relevant. Links:
https://www.androidsage .com/2018/07/22/how-to-root-snapdragon-galaxy-s7-and-s7-edge-on-android-8-0-oreo/
https://www.howtogeek.com/115297/how-to-root-your-android-why-you-might-want-to/
https://www.howtogeek.com/239798/how-to-unlock-your-android-phones-bootloader-the-official-way/
https://www.howtogeek.com/240047/how-to-flash-twrp-recovery-on-your-android-phone/
https://www.howtogeek.com/240582/how-to-back-up-and-restore-your-android-phone-with-twrp/
https://www.techtalkies365.com/how-to-unlock-frp-of-your-samsung-phone/
TWRP for Samsung Galaxy S7 (Exynos)
[Recovery][Exynos] Official TWRP for Galaxy S7 (herolte)
[DISCUSSION][S7-SNAPDRAGON]Unlock Bootloader - R&D
If anyone can point me in the right direction, that would be helpful! I can use a PC (Windows 10) for doing part of the rooting process if necessary.
I'm using a Samsung Galaxy S7 with T-Mobile as the carrier. Model SM-G930T, version 8.0.0, and build number (just in case) R16NW.G930TUVSBCTA2.
Click to expand...
Click to collapse
This would be a thread you'd want to take a look at: https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616. Unfortunately, you are on binary #11/B, and there is no root for that. There is no eng.boot for that, and that's what you need in order to root. The last eng.boot was for #10/A.
Drunkpilot said:
This would be a thread you'd want to take a look at: https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616. Unfortunately, you are on binary #11/B, and there is no root for that. There is no eng.boot for that, and that's what you need in order to root. The last eng.boot was for #10/A.
Click to expand...
Click to collapse
Hi and thanks! I'm guessing that means I can't root with my current device...?
Oh, and I did check out that thread, but I can't tell if it will work for my device (or what I'll need).
pyereciae2788 said:
Hi and thanks! I'm guessing that means I can't root with my current device...?
Oh, and I did check out that thread, but I can't tell if it will work for my device (or what I'll need).
Click to expand...
Click to collapse
Not until there is the correct eng.boot for the current binary. Our bootloader's are locked, so no way to downgrade.
Drunkpilot said:
Not until there is the correct eng.boot for the current binary. Our bootloader's are locked, so no way to downgrade.
Click to expand...
Click to collapse
Ah, great... I'll wait for the eng.boot then. Thanks again.
Hope the process for the eng.boot goes well.
I am also waiting for an eng boot for my G930T with baseband version G930TUVSBCTA2 ...
Me too
Root Help!!!
I am also on a Samsung Galaxy S7 with T-Mobile as the carrier. Model SM-G930T, version 8.0.0, and build number R16NW.G930TUVSBCTA2.
When trying to Root using odin, I keep getting the SW Rev Check Fail: [Boot] Fused 11 > binary 8 (or 1, or 4; it depends on which Tar I am using to attempt root).
If anyone finds a solution, please share! Thx!!!
same problem I want root for my mother's phone and thus change room
So, A friend gave me a Galaxy S10e from his workplace's salvage, didn't care to check for FRP or anything so now I'm effectively with a paperweight unless anyone here knows how to pass a qualcomm based, FRP locked phone.
Every corner of the web I have searched (including the second, third, and fourth page of google) have heralded 0 trustworthy results (most in hindi and have **** tons of malware)
Anyone know how to and willing to help?
UntrustedInstaller said:
So, A friend gave me a Galaxy S10e from his workplace's salvage, didn't care to check for FRP or anything so now I'm effectively with a paperweight unless anyone here knows how to pass a qualcomm based, FRP locked phone.
Every corner of the web I have searched (including the second, third, and fourth page of google) have heralded 0 trustworthy results (most in hindi and have **** tons of malware)
Anyone know how to and willing to help?
Click to expand...
Click to collapse
i found one called f*** your frp on xda, idk if it is safe or not so i would use it on a secondary laptop
on old android look up "talkback frp quick shortcut maker bug"
i found a tutorial on it by smoorez (he is pretty trustworthy in my opinion)
if you can find qualcomm firehose loaders for your device qfil is worth trying
I used samfw tool to frp unlock my Samsung
$cronos_ said:
i found one called f*** your frp on xda, idk if it is safe or not so i would use it on a secondary laptop
on old android look up "talkback frp quick shortcut maker bug"
i found a tutorial on it by smoorez (he is pretty trustworthy in my opinion)
if you can find qualcomm firehose loaders for your device qfil is worth trying
Click to expand...
Click to collapse
thanks man! tried the f*** your FRP tool, took a few tries but it definitely worked! You need to create a folder, set an exception in Windows Defender to not touche the files there, and then extract the zip file in there. I used an old laptop I don't care about but I don't think it actually contains viruses, the dude is pretty open about why it gets flagged... Still better to stay on the side of caution!
Sands207 said:
I used samfw tool to frp unlock my Samsung
Click to expand...
Click to collapse
There is a very easy way to remove Samsung FRP. There are many such applications and software available on the Internet, with the help of which you can remove FRP from your mobile phone. Link:- FRP Bypaa