So apparently on Samsungs official news site , the AOD display has a sensor that will disable the AOD when it's placed inside a pocket or a bag (Why would your watch be in your pocket or bag instead of your wrist?). You would think this would also work if say you're wearing a long sleeve shirt. I have been unable to trigger this via long sleeve shirts and I don't have thin enough clothing to test the pocket, nor do I own a bag to test.
"The device’s 3-inch circular Super AMOLED display has a resolution of 360 x 360. Its 16 million colors, full color Always On Watch continuously shows the time rather than fading to black. The ambient light sensor helps to adjust the brightness of displayed information and works to automatically disable the Always On Watch when users can’t see the screen, such as when the watch is in a pocket or a bag. Users can opt to personalize their Always On Watch with customizable, interactive watch faces."
Who's willing to help me test this feature?
Naturesretard said:
So apparently on Samsungs official news site , the AOD display has a sensor that will disable the AOD when it's placed inside a pocket or a bag (Why would your watch be in your pocket or bag instead of your wrist?). You would think this would also work if say you're wearing a long sleeve shirt. I have been unable to trigger this via long sleeve shirts and I don't have thin enough clothing to test the pocket, nor do I own a bag to test.
"The device’s 3-inch circular Super AMOLED display has a resolution of 360 x 360. Its 16 million colors, full color Always On Watch continuously shows the time rather than fading to black. The ambient light sensor helps to adjust the brightness of displayed information and works to automatically disable the Always On Watch when users can’t see the screen, such as when the watch is in a pocket or a bag. Users can opt to personalize their Always On Watch with customizable, interactive watch faces."
Who's willing to help me test this feature?
Click to expand...
Click to collapse
Someone already posted on the forums about how their AOD wasn't working, and they found out it was because their strap was blocking their wrist from making contact with the sensor. I'm guessing that the heart rate sensor didn't sense a pulse and turned off the screen completely, or some other sensor all together.
Here's the link:
http://forum.xda-developers.com/gear-s3/help/problems-feature-t3507324/page2
My AOD also turns off when the watch determines that I'm sleeping and then requires a security pin.
Sent from my SM-G935P using Tapatalk
optimummind said:
My AOD also turns off when the watch determines that I'm sleeping and then requires a security pin.
Click to expand...
Click to collapse
My AOD works just fine. But it will not turn off when sleeping or covered. It senses my heartbeat just fine. Perhaps my unit is defective? How did you get it to turn it when sleeping, anything special?
Naturesretard said:
My AOD works just fine. But it will not turn off when sleeping or covered. It senses my heartbeat just fine. Perhaps my unit is defective? How did you get it to turn it when sleeping, anything special?
Click to expand...
Click to collapse
Nothing special. My Classic began to track my sleep automatically out of the box. After I wake up, I press a button or rotate the bezel then put in my pin. Shortly afterwards, I get an alert on the watch and it shows in numbers & a graph how long I slept and also shows me how long I was motionless, how long I had a little bit of movement, and how long I was restless.
When the watch is simply covered up by my longsleeve shirt or a jacket, my AOD doesn't turn off.
Sent from my SM-G935P using Tapatalk
It won't turn off AOD with long sleeves, because it knows you're wearing it. It only turns off if it's NOT on your wrist. Or when you're sleeping.
Did anyone install the new PK7 watch update on their Gear S3? Any issues with AOD? Like AOD not working or turning off despite the AOD setting being on?
Sent from my SM-G935P using Tapatalk
I just got my Frontier today, and I came here now looking for answers on the AOD feature i have been hearing about but have not witnessed as of yet... My watch goes completely black every time after about 4 to 5 second of inactivity. Like i said i was coming here now to XDA to find out if this was a config problem or what?? Two things I have seen here that may be an issue for me, 1 - i always wear long sleeve shirts, and 2 - i have always had trouble with the smart watch heart rate monitors getting a good pulse on my wrist. (This is my 5th smartwatch, 4th samsung) I did do all of the updates today when initially using watch. I have been wearing it about 8 hours. Hope this helps.
S1CAR1US said:
I just got my Frontier today, and I came here now looking for answers on the AOD feature i have been hearing about but have not witnessed as of yet... My watch goes completely black every time after about 4 to 5 second of inactivity. Like i said i was coming here now to XDA to find out if this was a config problem or what?? Two things I have seen here that may be an issue for me, 1 - i always wear long sleeve shirts, and 2 - i have always had trouble with the smart watch heart rate monitors getting a good pulse on my wrist. (This is my 5th smartwatch, 4th samsung) I did do all of the updates today when initially using watch. I have been wearing it about 8 hours. Hope this helps.
Click to expand...
Click to collapse
Settings > Style > Always on. Have you turned that on?
Also, it won't work if the watch isn't on your wrist.
Is there a way to increase the brightness of the AOD? Mine is hard to see unless I'm in a fairly dark room.
lyall29 said:
Is there a way to increase the brightness of the AOD? Mine is hard to see unless I'm in a fairly dark room.
Click to expand...
Click to collapse
No, I just kept gesture motion on.
kronium said:
No, I just kept gesture motion on.
Click to expand...
Click to collapse
That's my set up also.
lyall29 said:
Is there a way to increase the brightness of the AOD? Mine is hard to see unless I'm in a fairly dark room.
Click to expand...
Click to collapse
Try Settings, Display, Brightness.
gpmg762 said:
Try Settings, Display, Brightness.
Click to expand...
Click to collapse
Thanks, this does seem to be the only way to make the AOD brighter.
"Samsung Flaunt" is a widget you can install, i installed it on mine (you have to select it from widget once installed) as i found certain faces i have time out into a default (black face white hands and red second hand) i didnt want this, i wanted a face of my selection be it downloaded or a pre-installed face to remain on at all times especially if i go out, if you select the "Frontier" face (pre-installed) and have AOD Turned on you lose very little in quality / dimming when the time out kicks in, with "Samsung Flaunt" you install the widget and this then allows you to have the watch face on for up to 30 mins, However it will eat your battery, but then i can live with day to day charging, I like the idea of going out for a meal or a beer with pals and my face being on, i like the idea of a smart watch simulating a "real" watch look, as we all know there are thousands of faces we can select to show off.
S1CAR1US you can change the time out by going settings/Display/Screen Timeout/ then theres a choice of 15 seconds, 30 seconds, 1 minute or 5 minutes, if you select the desired time out, and go back to your normal face, by clicking your bezel one click left (notifications) and one click right (watch face) your face should remain on for that length of time, if this isn't long enough (wasn't for me) i used the "Samsung Flaunt" widget.
Rgds
Is it possible or not to set automatique disable AOD for exemple every day at 23 h to 07 h ?
[email protected] said:
Is it possible or not to set automatique disable AOD for exemple every day at 23 h to 07 h ?
Click to expand...
Click to collapse
Would be very useful, but it is not possible.
I mean you can't set it in system settings, but it is possible to use a "complication" in Gear Watch Designer.
I designed a couple of watch faces setting a complication to turn off AOD every night, was very simple.
slimsta said:
"Samsung Flaunt" is a widget you can install, i installed it on mine (you have to select it from widget once installed) as i found certain faces i have time out into a default (black face white hands and red second hand) i didnt want this, i wanted a face of my selection be it downloaded or a pre-installed face to remain on at all times especially if i go out, if you select the "Frontier" face (pre-installed) and have AOD Turned on you lose very little in quality / dimming when the time out kicks in, with "Samsung Flaunt" you install the widget and this then allows you to have the watch face on for up to 30 mins, However it will eat your battery, but then i can live with day to day charging, I like the idea of going out for a meal or a beer with pals and my face being on, i like the idea of a smart watch simulating a "real" watch look, as we all know there are thousands of faces we can select to show off.
S1CAR1US you can change the time out by going settings/Display/Screen Timeout/ then theres a choice of 15 seconds, 30 seconds, 1 minute or 5 minutes, if you select the desired time out, and go back to your normal face, by clicking your bezel one click left (notifications) and one click right (watch face) your face should remain on for that length of time, if this isn't long enough (wasn't for me) i used the "Samsung Flaunt" widget.
Rgds
Click to expand...
Click to collapse
Where did u install it from.. Cannot find it in playstore store nor Samsung stire
Sent from my Nexus 6P
I went into samsung gear app/samsung Galaxy apps/searched for flaunt, installed and it should sync to widgets on your s3 gear, hope this helps?
Secret section gear 3
lyall29 said:
thanks, this does seem to be the only way to make the aod brighter.
Click to expand...
Click to collapse
if you guys trying fix all the lil things like brightness and touch and sound go settings_gear info_about device_software version when you infront of this click 5x and that will bring up dialer on there then just press *#0*# from here you can mess with brightness and all sorts of stuff if you figure wat *#0011# will help me out been trying bunch old codes from my s3 s5 days alot work on this lil thing and also if anyone figures out how too turn on dev mode cuz of thizzz pm me thanks....
Can't get my Faces from "Gear Watch Designer" to my Gear S3. - new and old stuff
Hi
After the update I can't send watchfaces from "Gear Watch Designer 1.3.2_beta build 170410 to my watch.
I first create a new watch face, and get this error "Current OPR (on Pixel Ratio) of the Always-on state is too high. This .. ( se attach picture.)
The attach picture popup, and the Watch Face don't be send to my Watch.
I restart the software and the watch, and open one of my old Watch Face, I know is OK, but I still get this messages:
How do I fix this problem ?
stonefox said:
Hi
After the update I can't send watchfaces from "Gear Watch Designer 1.3.2_beta build 170410 to my watch.
I first create a new watch face, and get this error "Current OPR (on Pixel Ratio) of the Always-on state is too high. This .. ( se attach picture.)
The attach picture popup, and the Watch Face don't be send to my Watch.
I restart the software and the watch, and open one of my old Watch Face, I know is OK, but I still get this messages:
How do I fix this problem ?
Click to expand...
Click to collapse
This means you have used high resolution images/graphics that could drain your battery quicker. Samsung gives allowable OPR upto 15%. To disable this warning and go ahead with high-resolution watchfaces, you can remove Always-on state features from your design before building it in Gear Watch Designer under Project>>Always-on state by disabling:
High color
Low-bit color
When you removed these options, default Always-on mode would be provided.
And during build, Gear Watch Designer would issue a warning for NOT generating Always-on state watch face. When asked whether to generate them, simply hit "NO". Your watch face can now be built and pushed into your Gear S3! Enjoy!!
Hi,
I've only just got my GW4 (after upgrading from the original GW). One thing i noticed is that although i have heart rate set to "Measure continuously", it doesn't seem to work on watch faces i downloaded from the play store. On those faces it rarely seems to update and i often have to press the icon on the face to get it to update manually. This used to work on the original Tizen GW. Is this a bug or deliberate? Is there any workaround ?
Hello,
From what I have read, watch faces has its own method for reading the HR, who is not correlated with the Samsung Health HR setting.
Creators can set the update interval and normally they put an interaction to manually trigger the measurement.
I never work with watch faces, but I think it's possible to create one with a lower interval period.
This is a question that I also had because all of the watch faces that arent from Samsung has this annoying issue and the other watch faces from Samsung aren't even available which sucks. I thought someone would have been able to create some work around since it was based on android now.
I am using the I-Digit watch face and continuous monitor works on it, but you have to have the AOD enabled. The setup app told me this, so I turned it on and it works just fine. You mite try that on the watch face you are trying.