[ROM]{FLASHABLE STOCK}[LENOVO] [K6][K6 Power][K33] [S231] - Lenovo K6 / K6 Power / K6 Note ROMs, Kernels, Reco

* Based on Official Nougat (7.0) S231_K33_ROW for Lenovo K33 TWRP Flashable
* This is complete s231 Rom/ firmware not s231 OTA
* Rom made with SupperR Kitchen
* Can be flashed on K33a42 / K33a48 / K33b36 / K33b37​
Disclaimer!
I am not responsible for bricked devices!!!​
Features
* Based on official Nougat S231 Release
* Full stock experience
* Can be flashed on top of MM but upgrade to N through OTA or QFil is recommended.
* Rom made using Supper'r Kitchen
Requirements:
* Lenovo K33
* Installed Custom Recovery TWRP.
* Time and patience
Instructions
* Download the zip and put it on internal or external sd card( if you have one)
* Boot into TWRP Recovery
* Create Backup of your ROM.
* Select Install zip.
* Choose the zip you downloaded, and wait till the flashing finishes.
* After installation the device will boot and reboot, this is normal.
* Finish the setup and enjoy the phone.
* For Root Flash SuperSU.zip from recovery
DOWNLOAD LINK
MEGA
G-Drive
Thanks
SuperR Kitchen
Lenovo-Forums.ru
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dont Forget to say thanks

Thanks...

thanks working for me

Marshmallow file
Plzzz plzzz plZz give flashable file through twrp for marshmallow 6.0.1 also .

Guys,
Is this rom compatible with K33a48?

roti86 said:
Guys,
Is this rom compatible with K33a48?
Click to expand...
Click to collapse
Haaays.... Find your stock ROM in this forum not thread

roti86 said:
Guys,
Is this rom compatible with K33a48?
Click to expand...
Click to collapse
Compatible with all K33 Variants.

Back

I install this ROM on my Lenovo K6 power and use this for some days and I see that the rom lags and freezes sometime ,battery backup is very bad and the rom has excessive heating problem with normal usage like 10 minute browsing or facebooking. So I go back to the lineage OS 15.1 custom ROM far better than this though this linega ROM also have few minor bugs.

Some screenshots of this Rom--

Rommaster94 said:
Some screenshots of this Rom--
Click to expand...
Click to collapse
How is the Battery Backup and is Dolby atmos working ??

Captain_Akshay said:
How is the Battery Backup and is Dolby atmos working ??
Click to expand...
Click to collapse
Battery backup is very bad only 4 to 5 hours of SOT. Also heating problem was there. Dolby works fine on mobile speaker but if you play home theatre with it then the experience will be pathetic.

Rommaster94 said:
Battery backup is good in compare to any other custom ROMs available for K6 power and dolby atmos working Fine, sound quality was super
Click to expand...
Click to collapse
Thats great since it is a modified version of stock nougat !!

Do i have to wipe cache,system,data,dalvik also like during installing custom rom??

moonranger98 said:
Do i have to wipe cache,system,data,dalvik also like during installing custom rom??
Click to expand...
Click to collapse
Yes...... Installation method is same like custom rom

moonranger98 said:
Do i have to wipe cache,system,data,dalvik also like during installing custom rom??
Click to expand...
Click to collapse
Thanks:fingers-crossed:

Rommaster94 said:
I flashed it on my k6 power k33a42 and works like a charm...fast ,responsive, smooth, and good battery backup, most importantly i get back my device certification from play store :fingers-crossed:
THANKS ADILRENZU:good:
Click to expand...
Click to collapse
do apps like tez work?

I flashed in k33a48 through twrp... It shows error.... "This package is for k33,karate,k33b36,lenovo_k6 devices... this is a k33a48" please help me.... i havent slept last night...

Simon1994 said:
I flashed in k33a48 through twrp... It shows error.... "This package is for k33,karate,k33b36,lenovo_k6 devices... this is a k33a48" please help me.... i havent slept last night...
Click to expand...
Click to collapse
flash the recovery from karthikk. from twrp website. for k33. then flash the Rom.

Simon1994 said:
I flashed in k33a48 through twrp... It shows error.... "This package is for k33,karate,k33b36,lenovo_k6 devices... this is a k33a48" please help me.... i havent slept last night...
Click to expand...
Click to collapse
Go to this thread :- https://forum.xda-developers.com/k6-power/development/recovery-twrp-3-0-2-lenovo-vibe-k6-t3618912
and download the latest TWRP version i.e 3.2.1-0
NOTE :- K6 POWER - K33
K6 NOTE - K53

Related

[ROM][UPDATED][KK]NubiaUI for lenovo A6000/+

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This custom rom is packed with lots of features and is based on the stock rom with modified themes, drop down chameleon status bar and much more which you can see at the bottom of the post in screenshots. NibiaUI is generally focused more on the user interface and also the performance is quite well and you will love the other features available in it.
I am not the developer of this rom I am just sharing this rom with you all.
Pre-requisites
1. Rooted device
2. CWM installed
3. Custom Rom of NUBIA-UI -Download
4. Google Services (Gapps) :- Download this is a pico gapps
5. Backup all your data.
Features of NUBIA UI
Pre-Rooted – Supersu installed
Drop down Chameleon Status Bar
Lunar Lock Screen
Advanced Setting for Header
CRT Screen Lock with Switch Camera, Switch Lock Screen,
Display Calendar in Screen Lock
Double Tap to Unlock Screen
Virtual Power Buttons
Google Assistant
Xposed Status Bar (Two Styles)
Custom Label Status Bar Speed Switch (Three models)
Control Button Switches
many more…
What's new in update
WiFi bug fixed
Google Apps error fixed
Camera app crash fixed
Authentication error fixed
Many more bugs fixed
More
if you don't like default camera app then you can download stock KitKat camera from this link
you can direct flash this zip vie CWM or TWRP recovery.
How to install NUBIA-UI Custom Rom
Step 1 : Copy the rom zip, gapps zip in your SD Card
Step 2 : Boot into Recovery
Step 3 : Enter recovery mode
Step 4 : Make full wipe including “system” (dalvik cache and others)
Step 5 : Flash the rom and then the gapps
Step 6: Reboot (the first boot can take up to 2 minutes)
SCREENSHOTS
About the ROM
Android Version: 4.4.4
ROM type: NUBIA-UI
ROM Author: liuxingghost
I hope you'll like my share:good:
It doesnt have installing problem na....
rajgabbar said:
It doesnt have installing problem na....
Click to expand...
Click to collapse
no just use CWM or any recovery that support kitkat no flashing issues
soan0 said:
no just use CWM or any recovery that support kitkat no flashing issues
Click to expand...
Click to collapse
It doesnt install from twrp....in lollipop
rajgabbar said:
It doesnt install from twrp....in lollipop
Click to expand...
Click to collapse
use twrp of kitkat version it is not a lollipop rom
soan0 said:
use twrp of kitkat version it is not a lollipop rom
Click to expand...
Click to collapse
For that i have to install kitkat stock rom first
rajgabbar said:
For that i have to install kitkat stock rom first
Click to expand...
Click to collapse
no need if u r on lollipop use kk2lollipop pach and then flash this zip
soan0 said:
no need if u r on lollipop use kk2lollipop pach and then flash this zip
Click to expand...
Click to collapse
Can u please send me an link of that patch
rajgabbar said:
Can u please send me an link of that patch
Click to expand...
Click to collapse
which phone do u have a6000 or a6000 plus
soan0 said:
which phone do u have a6000 or a6000 plus
Click to expand...
Click to collapse
A6000 plus
rajgabbar said:
A6000 plus
Click to expand...
Click to collapse
read this
https://forum.xda-developers.com/lenovo-a6000/how-to/firmware-base-switcher-a6000-plus-t3411914
soan0 said:
read this
https://forum.xda-developers.com/lenovo-a6000/how-to/firmware-base-switcher-a6000-plus-t3411914
Click to expand...
Click to collapse
well i managed to do that ...btw thanxxx
rajgabbar said:
well i managed to do that ...btw thanxxx
Click to expand...
Click to collapse
get going bro:fingers-crossed::good::laugh:
soan0 said:
get going bro:fingers-crossed::good::laugh:
Click to expand...
Click to collapse
I must say this is the rom i m searching for.
Bro i have flashing issue. I used vibe 2.5 custom rom ( my device is lenovo a6000 plus), when i try to flash this rom over twrp it will stuck on boot.
D TheThWr said:
Bro i have flashing issue. I used vibe 2.5 custom rom ( my device is lenovo a6000 plus), when i try to flash this rom over twrp it will stuck on boot.
Click to expand...
Click to collapse
bro wait for few minutes and it is kitkat rom so first flash kitkat patch file and then rom if you have done this then wait for few minutes it will boot up
Bro I do same as u tell but result will be same. I have try since long time to flash kitkat ROM but result will be same. I can't understand what can I do for short out this problem plz help me.
---------- Post added at 02:01 PM ---------- Previous post was at 01:57 PM ----------
This problem is also seen when flashing CWM recovery or old Twrp recoveries. After flashing Recovery it will stuck on boot.
it has some problem with speaker.......after every 15 secs there is a crashing voice from speakers if u listen a music
Right bro, I have also this problem on this Rom.
rajgabbar said:
it has some problem with speaker.......after every 15 secs there is a crashing voice from speakers if u listen a music
Click to expand...
Click to collapse
bro i am not the dev of this rom
but tow thing u can do
1....disabled the sound fx in the setting or equalizer
2....install other sound fx or equalizer
1 method is the best

[Rom]Lineage-15.0-lettuce-20170922-Unofficial-(22-9-17)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device.
Note(IMP):-
-After installing rom wait some time to becoming Rom stable
-Rom take some time on 1st boot
-Rom does n't include Gapps
-Clean Flash suggested
Link:-
20170922
Changelog:-
20170922
Hotspot issue fixed
Fc while switching to mobile network fixed
Bluetooth fixed
Click to expand...
Click to collapse
20170909
Changelog:-
20170909
Initial Build
Click to expand...
Click to collapse
What's Working :
Audio
Camera
Wifi
Ril
Audio(needs to enable MonoAudio to let it work)
VideoRecording
FlashLight
Bugs:-
Proximity Sensor doesn't works
Flashing process:-
Go to TWRP
Wipe cache / dalvik cache / data / system......
Then,
flash rom
Sources:-
Device Tree:-https://github.com/DROHAN898/android_device_yu_lettuce/tree/lineage-15.0
KernelSource:-https://github.com/DROHAN898/android_kernel_cyanogen_msm8916
XDA:DevDB Information
Lineage-15.0, ROM for the YU Yuphoria
Contributors
#Rohan, #Rohan, h2o64
Source Code: https://github.com/LineageOS/android/tree/lineage-15.0
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: LineageOs
Version Information
Status: Testing
Created 2017-09-14
Last Updated 2017-09-22
Is it android O?
Dextrob said:
Is it android O?
Click to expand...
Click to collapse
Yes
#Rohan said:
Yes
Click to expand...
Click to collapse
can you add screenshots and what bugs are there in this rom?
Dextrob said:
can you add screenshots and what bugs are there in this rom?
Click to expand...
Click to collapse
Already Added & read op
Is there volte feature supported
Is there volte
abdulla abd said:
Is there volte
Click to expand...
Click to collapse
No VOLTE ...
Download link for gapps ?
Dev
I clean flashed this ROM but it couldn't boot up to system instead it got into a bootloop of Yuphoria logo
It even crashed my Recovery as well, i couldn't even boot into my recovery manager to wipe and restore the previous ROM,
Finally i somehow got information to unbrick the device using Stock ROM.
PLEASE find out the faults in it, i request u to Update the source code for TWRP( U only modify it) to make it support Oreo ROMs.
Edit:
I was able to install this ROM after installing some modified TWRP version. I will add the link to that file asap.
Nice bro
thippu46 said:
Dev
I clean flashed this ROM but it couldn't boot up to system instead it got into a bootloop of Yuphoria logo
It even crashed my Recovery as well, i couldn't even boot into my recovery manager to wipe and restore the previous ROM,
Finally i somehow got information to unbrick the device using Stock ROM.
PLEASE find out the faults in it, i suggest u to Update the source code for TWRP( U only modify it) to make it support Oreo ROMs.
Click to expand...
Click to collapse
Bro will you please send me info about how to unbrik while stuks on logo I am also fasing
NARENDRA1996 said:
Bro will you please send me info about how to unbrik while stuks on logo I am also fasing it
It's my whats app no :- 9052047905
Click to expand...
Click to collapse
Redirecting to other platforms from XDA is treated as offence according to Basic rules and regulations of this forum, so i request you to edit ur post by removing ur nmbr and that sentence first.
Answer for your problem is:
Follow the steps as mentioned by the below thread:
https://forum.xda-developers.com/yu-yuphoria/help/bricked-t3174710/page15
If you find any difficulties while doing this, please come up here and post your queries or else post it there in that thread.
All the best
Note: while installing stock firmware please be careful.

《ROM》flyme os 6 updated version (nougat version)

i m not responsible for any incident which may happen during flashing this rom or your device may get bricked.
new or better to say updated version of flyme os
beta version of flyme version but very much stable
i m not the developer of this rom,i m just sharing this rom with u guysz.
installation process as follows:
1.must have a rooted redmi note 4 (snapdragon)
2.twrp recovery installed latest version.
3.download the rom from the link below(afterclicking the link u see all the things in chinese please click on blue box and ur downloading will start)
4.download gapps for nougat
5.boot into recovery mode
then wipe data system cache dalvik cache
no need to format ur device
6.install the downloaded zip file and the gapps
7.reboot.
enjoy u have flyme os installed with nougat.
bugs:
volte doesnt support otherwise a good rom for daily usage
thanks to all the developer who created this rom.
i m not responsible for any incident which may happen during flashing this rom or your device may get bricked.
http://openrom-dl.flyme.cn/12156221...9/flyme_Redmi-Note4x_136fei_6.8.2.1R-beta.zip
above link is for rom .
thanks
will try....
have few questions,
which nougat version? 7.1.2 or other?
I searched the flyme site, but I couldn't find the rom for mido devices. is this rom ported to mido by you?
the size is large enough to contain the gapps, but you asked to install it, is it OK?
h_bekhit said:
will try....
have few questions,
which nougat version? 7.1.2 or other?
I searched the flyme site, but I couldn't find the rom for mido devices. is this rom ported to mido by you?
the size is large enough to contain the gapps, but you asked to install it, is it OK?
Click to expand...
Click to collapse
nougat 7.1.2 buddy.
and this rom in not ported my be.
also although the rom package is almost of 1gb but u have to install gapps for google play.
Downloading....
Sent from my Redmi Note 4 using XDA-Developers Legacy app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[emoji12]
Sent from my Redmi-Note4x using XDA-Developers Legacy app
Did you flash the firmware also with this build?
Flashed, tried it, love it! My new daily driver! Hope battery will be good.
Anyone tried to uninstall system apps?
What about fingerprint and camera quality??
new version Flyme 6.8.3.8R beta was uploaded 3 days ago
https://www.flyme.cn/firmwarelist-151.html#7
download link:http://openrom-dl.flyme.cn/12156221...1/flyme_Redmi-Note4x_136fei_6.8.3.8R-beta.zip
thain said:
new version Flyme 6.8.3.8R beta was uploaded 3 days ago
https://www.flyme.cn/firmwarelist-151.html#7
download link:http://openrom-dl.flyme.cn/12156221...1/flyme_Redmi-Note4x_136fei_6.8.3.8R-beta.zip
Click to expand...
Click to collapse
Volte bug fixed in this update???
DOes anyone know how to make quick tiles collapsed? When you have notificationits alright but normally they are expanded and i dont like it
ayush.gl said:
Volte bug fixed in this update???
Click to expand...
Click to collapse
it seems not...
Is it prerooted?? What about xposed framework, will it work?
My Redmi Note 4X not boot, it stuck in Flyme logo.
[email protected] said:
Did you flash the firmware also with this build?
Click to expand...
Click to collapse
no need of that..only flash this ported rom and gapps
ayush.gl said:
What about fingerprint and camera quality??
Click to expand...
Click to collapse
fingerprint working and pretty fast also and camera quality is also good
ayush.gl said:
Is it prerooted?? What about xposed framework, will it work?
Click to expand...
Click to collapse
no u have to flash super su with lazy flasher and xposed is working for me..
drnguyenluan68 said:
My Redmi Note 4X not boot, it stuck in Flyme logo.
Click to expand...
Click to collapse
first boot may take some time....but if it is stuck on boot loop try flashing again ....
thain said:
new version Flyme 6.8.3.8R beta was uploaded 3 days ago
https://www.flyme.cn/firmwarelist-151.html#7
download link:http://openrom-dl.flyme.cn/12156221...1/flyme_Redmi-Note4x_136fei_6.8.3.8R-beta.zip
Click to expand...
Click to collapse
its the same rom as i have uploaded..
rajgabbar said:
its the same rom as i have uploaded..
Click to expand...
Click to collapse
yes, they are all official builds by @136fei

[Rom] [8.1.0 ]ResurrectionRemix Rom 6.0.0 [J701x]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Oreo​
Installation Files​
DOWNLOAD ROM
Unofficial Open GApps 8.1 : DOWNLOAD GAPPS
Big thanks to:
Exynos7870 team
XDA developers
LineageOS team
DU
Omni team
AND OF COURSE TO ALL THE SUPPORTERS, DONATORS AND USERS
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
This has all the features from nougat? Any bugs?
VoiDx87 said:
This has all the features from nougat? Any bugs?
Click to expand...
Click to collapse
join here
Samsung Galaxy J7 ⑥ Nxt Group!
Group Link: https://telegram.me/joinchat/Cmh8LUAs6AFEJUfawPCiWg
Rules:
1. Respect all members.
2. Dont Flood with messages
3. Use English Only.
4. Don't share SS if you won't share rom.
5. Dont Bother Anyone.
6. NO ETAs
1- Work in Galaxy j7 neo sm-j701m ?
2- its 64bits ?
3- bugs ?
Flashing Problem
Updater process ended with ERROR: 7
Every time I flashed the rom I got this line and installation failed.What should I do now???
mr. cst said:
Updater process ended with ERROR: 7
Every time I flashed the rom I got this line and installation failed.What should I do now???
Click to expand...
Click to collapse
are you on latest twrp?
Jbgamer04 said:
are you on latest twrp?
Click to expand...
Click to collapse
I don't think so.
Now I am in a custom rom. How can I update my recovery from a custom rom?
mr. cst said:
I don't think so.
Now I am in a custom rom. How can I update my recovery from a custom rom?
Click to expand...
Click to collapse
download the latest recovery.img for your device then boot into twrp , press install and select image then select the recovery then reboot again to twrp thats it
Jbgamer04 said:
download the latest recovery.img for your device then boot into twrp , press install and select image then select the recovery then reboot again to twrp thats it
Click to expand...
Click to collapse
is custom rom not a fact to flash the twrp???
I mean nothing will happen to my phone if I flash the latest twrp staying in a custom rom???
mr. cst said:
is custom rom not a fact to flash the twrp???
I mean nothing will happen to my phone if I flash the latest twrp staying in a custom rom???
Click to expand...
Click to collapse
nothing to worry about that you are just updating the twrp
Good job bro! Keep it up!
Simrat singh said:
Resurrection Remix Oreo
Installation Files
DOWNLOAD ROM
Unofficial Open GApps 8.1 : DOWNLOAD GAPPS
Big thanks to:
Exynos7870 team
XDA developers
LineageOS team
DU
Omni team
AND OF COURSE TO ALL THE SUPPORTERS, DONATORS AND USERS
Click to expand...
Click to collapse
I want to root and install substratum in this rom..
Simrat singh said:
Resurrection Remix Oreo​
Click to expand...
Click to collapse
I am considering buying J701M (not J701F). Had anybody have any experience with this ROM (or any other J701F custom ROM) on J701M?
I noticed that the post title says "[J701x]" but still like to hear a confirmation from somebody who successfully ran this on 701M.
Thanks.
/alex
largeBrazilNut said:
I am considering buying J701M (not J701F). Had anybody have any experience with this ROM (or any other J701F custom ROM) on J701M?
I noticed that the post title says "[J701x]" but still like to hear a confirmation from somebody who successfully ran this on 701M.
Thanks.
/alex
Click to expand...
Click to collapse
Do yourself a favour and dont buy this phone , I already sold mine ...
Work on j701MT?
Simrat singh said:
Do yourself a favour and dont buy this phone , I already sold mine ...
Click to expand...
Click to collapse
Could you please elaborate if possible?
Is the phone ****ty per se OR you were specifically having problems with custom builds?
Thanks
/alex
Is this for j701f ?
Bump
largeBrazilNut said:
Could you please elaborate if possible?
Is the phone ****ty per se OR you were specifically having problems with custom builds?
Thanks
/alex
Click to expand...
Click to collapse
Works for j701m?
Don't flash latest twrp for J7 Nxt after you have faced Bootloop problem

[ROM][Android 11][RAPHAEL]crDroid v7.10 [23/09/2021][OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features
Flashing Instructions:
Pre-installation:
Firmware
First time installation:
- Boot into recovery
- Wipe Cache, System, Data
- Flash Vendor Firmware
- Flash ROM
- Flash Magisk.zip (optional)
- Reboot
Update installation:
-Boot into recovery
-Flash ROM
-Wipe cache
-Reboot to system
Sources:
ROM: crDroid Github
Kernel: Prebuilt
Download:
ROM
Changelog
Known issues:
- You tell me?
Visit official website @ crDroid.net
crDroid Raphael Telegram
crDroid Community Telegram
Donate to help our team pay server costs
Screenshots:
Notes:
- Selinux is Enforcing
- Please CLEAN FLASH if coming from Android 10.
- Please use the specific vendor/firmware for your device region.
Support Group: Telegram
Reserved
pro
Thanks you!
thx for the rom. wich GAPPS to use ?
Wonderful, finally an 11 rom that I'm gonna actually try!
Edit
There is a small bug on screenshot..
Volume down button + power key for partial screenshot..
Three finger swipe for full screen shot..
If i enable both options it only take partial screenshot..
If i turn of "partial screenshot mode"
again it takes partial screenshot..
After disabling both, and re enable.. First time it will work fine.. 2 or 3rd time, it will do the opposite..
Pls fix the Gapps Issue..
cant flash the nikgapps stock - bootloop
Pls give pixel launcher as default
Pls bring the Brightness slider to down
Couldn't find an option to switch the color to amoled black ( settings and menu etc)
But such a beautiful ROM.. Good battery.. And sooper smooth..
Thank you so much
wathry said:
thx for the rom. wich GAPPS to use ?
Click to expand...
Click to collapse
Nik Core.. Don't use other versions.. You'll end up in bootloop..
Make sure you flash the magisk after the first boot..
Magisk version 21.4
wathry said:
thx for the rom. wich GAPPS to use ?
Click to expand...
Click to collapse
Only core will work!
If you need the setup wizard, just flash the add-on "setup wizard" too!
Anyone tried using viper? Is it working? Also can anyone please tell me what's the latest Indian firmware version??
vaib said:
Anyone tried using viper? Is it working? Also can anyone please tell me what's the latest Indian firmware version??
Click to expand...
Click to collapse
viper works, but only v2.7.2.1
S.N.A.P said:
viper works, but only v2.7.2.1
Click to expand...
Click to collapse
Ok.Thanks for info.
But can you share install method .
For me It break wifi and sound .
catxda said:
Ok.Thanks for info.
But can you share install method .
For me It break wifi and sound .
Click to expand...
Click to collapse
kernel problem, never use V4A with Perf kernel, change to another kernel and wifi + sound will work normally
tv cast bugged. When i try to cast my phone on tv, it always reboot.
Bug report - display flashes once after waking up. Hopefully it isn't something that's hard to fix.
catxda said:
Ok.Thanks for info.
But can you share install method .
For me It break wifi and sound .
Click to expand...
Click to collapse
How to Install ViPER4Android on Android 11/Android 10 Q (Alternate Method)
Can't install ViPER4Android on your device running Android 11/Android 10? Don't worry, it's a known issue. In this guide, we will show you how to install ViPER4Android on Android 11 and Android 10 Q…
www.thecustomdroid.com
Follow the alternative method here and it will work. It does for me.

Categories

Resources