Hi, I have been following this forum for a long time but I had never logged on. I commented my problem, although I saw several threads that deal with the subject, I did not see any updated or that I clarify the doubts well.
I'm from Argentina and buy aliexpress LG V10 H900, refurbish, came with Android 5.1. Seeing through several forums I saw that ATyT released an official update to 6.0 Marshmallow, to update via LGUP (via OTA I did not get to be outside the USA). I did not have problems to flash it, but when I started to test the functions, I found that the fingerprint reader does not work, it does not let me directly enter the settings. LG VPN error when starting, does not allow me to uninstall preinstalled apps (restarts the cellphone), among other errors.
Then I found out that you can not go back to Android 5.1, nor is there another ROM to try. I made a complete wipe from the cel options after the update. When I wanted to start from recovery I could never, try with all the key combinations and I could never, it is as if I did not have recovery ... Nothing work for me.
Sorry if the post was long, I hope to solve it and give me their experiences and opinions. Thanks and greetings to the community
i'm sorry
MrRobot_84 said:
Hi, I have been following this forum for a long time but I had never logged on. I commented my problem, although I saw several threads that deal with the subject, I did not see any updated or that I clarify the doubts well.
I'm from Argentina and buy aliexpress LG V10 H900, refurbish, came with Android 5.1. Seeing through several forums I saw that ATyT released an official update to 6.0 Marshmallow, to update via LGUP (via OTA I did not get to be outside the USA). I did not have problems to flash it, but when I started to test the functions, I found that the fingerprint reader does not work, it does not let me directly enter the settings. LG VPN error when starting, does not allow me to uninstall preinstalled apps (restarts the cellphone), among other errors.
Then I found out that you can not go back to Android 5.1, nor is there another ROM to try. I made a complete wipe from the cel options after the update. When I wanted to start from recovery I could never, try with all the key combinations and I could never, it is as if I did not have recovery ... Nothing work for me.
Sorry if the post was long, I hope to solve it and give me their experiences and opinions. Thanks and greetings to the community
Click to expand...
Click to collapse
Welcome to LG's Hell :crying:
i'm stuck in this too and then i got unkown battery then i throw my phone to the trash
Nawaf Bawyan said:
Welcome to LG's Hell :crying:
i'm stuck in this too and then i got unkown battery then i throw my phone to the trash
Click to expand...
Click to collapse
I come from an LG G2 and the truth never a problem, to this day it still works perfect. But since I have the V10 several problems have arisen. Now when I plug it in to charge it it marks a crossed out battery, as if it had to be replaced. I'm afraid to get the battery to take it. The load itself lasts little and nothing, has excessive consumption as "inactive phone" (sometimes up to 40% of total consumption), and never gave me more than 1:45 hours of screen.
Regarding the ROMs, I saw on the AtyT page that there are several updates (I have the 90021w), but there are at least 3 more that correct security problems supposedly. It would be a matter of downloading these updates and installing via LGUP, maybe the problems will be solved. I installed the 90021w which was an update, instead there is a ROm that I get ATyT which is the complete one when they made the change from 5.1 to Marshamllow. Maybe loading that (I think it's the 90021v) will also be able to finish with the forced closures and other ... Someone already tried this method ??
consulta.!!!
amigo soy de argentina tambien y tengo exactamente el mismo problema, pudiste solucionarlo?
spawn_stash said:
amigo soy de argentina tambien y tengo exactamente el mismo problema, pudiste solucionarlo?
Click to expand...
Click to collapse
Hola como estas, aun no pude solucionarlo, solo hay opciones para los modelos vs990 o h901, para la bosta de atyt nada, un saludo
Related
Does anyone know how to solve this? Because my Moto g is not qualified to unlock bootloader? someone managed to solve this?
Next time buy unbranded?
Sent from Sauwny the TL
Durteedee said:
Next time buy unbranded?
Sent from Sauwny the TL
Click to expand...
Click to collapse
My Moto G is the operator Claro
Wait, did you try unlocking or do you just think its not unlockable?
https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth
go here and check if yours is really unlockable or not? (only sure way to know)
Make sure that you have entered the code properly
Sent from my Moto G using xda app-developers app
i don't know if operator device lock allow u to unlock the bootloader or not but if it is okey after you get the code from ADB don't copy that!! instead of that enter the code manual and type it on keyboard this is my expreince that works fine for me,hope works for u too.
I already went there on the Motorola website and not of
Remove all spaces in between
Sent from my XT1033 using xda app-developers app
I faced same issue try unlink your device from moto services wait for atleast 12hrs then...try unlocking again!
it worked for me!
I had exchanged for a retail stock rom a few days ago, but still get an error
So I will not be able to install CM11: (good if had a rom that already come with unlocked bootloader, root, cwm
i also bought my moto g from claro and i unlocked it without problems, i heard of a guy with the same problem, his device was defective
spanish: yo tambien compre mi moto g en claro y lo pude desbloquear sin problemas, escuche de un tipo con el mismo problema, su telefono estaba defectuoso
Gonzanob said:
i also bought my moto g from claro and i unlocked it without problems, i heard of a guy with the same problem, his device was defective
spanish: yo tambien compre mi moto g en claro y lo pude desbloquear sin problemas, escuche de un tipo con el mismo problema, su telefono estaba defectuoso
Click to expand...
Click to collapse
Me and my friend bought at the same store the two of course, and they do not give to unlock
The first time i tried to unlock my bootloaders i also got that response that is unlockable. But then i tried couple off times, and i think that the third time was successful.
Did u tick the I agree to be bound by the terms of the legal agreement on the bottom of the page first and then click if your device can be unlocked?
this is my code, do not know why It's impossible to unlock, wanted to test the CM11, when I had the L7 was even easier to unlock the boot
3A45890945149233#3034323331313931303400585431303333000000#12DBFC8932562B4C1138B310AE39D9959BD3EDF9#EA3EB2010F0000000000000000000000
NikolasG. said:
this is my code, do not know why It's impossible to unlock, wanted to test the CM11, when I had the L7 was even easier to unlock the boot
3A45890945149233#3034323331313931303400585431303333000000#12DBFC8932562B4C1138B310AE39D9959BD3EDF9#EA3EB2010F0000000000000000000000
Click to expand...
Click to collapse
Remove the spaces and retry.
I've removed the spaces
Yup, tried with your code and it didn't work, cross checked with my own string and the no. of chars and everything else matches. How did you copy this code from command prompt? Use right click, mark, select the text, right click title bar,copy so that you have no errors rather than manually copying. If it isnt human error and that is the right code, I guess you really can't unlock this one.
I think my Moto G is rotten
3A55000495394616#5441393333303056314F00585431303333000000#F3096BB5A8EA61F8509E51CFDCC6CDEBE1403E91#B86CC3020F0000000000000000000000
thats my code.. i can not unlock
Could anyone please help me out? I have a bricked device and am looking into how to unbrick it.
I'm particularly interested if the English version of HiSuite which says it supports the L09 and L29 actually does.
Could anyone with an L29 or an L09 please put their device in fastboot and try the system recovery from hisuite:
http://consumer.huawei.com/minisite/HiSuite_en/
A new version which supposedly supports the phones was released.
Could anyone confirm if this works?
cmon guys, help out this man, so that he can continue to help us with new firmware updates
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
I did it with a L29 device. The app says Device is in recovery mode, and once I clicked next, It says your device is not supported for system recovery. Please take your device to a nearby huawei service center.
If your device is unlocked reflash through fastboot
Sent from my HUAWEI NXT-L29 using Tapatalk
M.Noury said:
If your device is unlocked reflash through fastboot
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
I wish that I could do that, but there are partitions that I can't flash with fastboot, which I did flash using other means when reverse engineering the updates. Those are the partitions which are broken and don't allow my phone to boot, or show anything on the screen for that matter.
There is a restore mechanism built into Huawei's fastboot to get into a separate restore mode, but I think there is a special recovery image needed which the Huawei Hisuite app can access. I just don't know how to find it when all the devices come back as unsupported, despite being shown as supported in the documentation. It's very strange.
This is something that Sony had done with two hidden partitions FOTA and TA . This makes the device unbrickable and also.Have the OEM ways to keep the boot locked with hidden features.
Hisuite latest Windows app has these features to restore and when I tried,it scanned my.phone and found.My.phone to be working fine.
1) start the hisuite App on pc
2) connect to the phone in fastboot mode
3) restore
4) the app scans and looks for the partitions and then restores the bricked phone ONLY
---------- Post added at 12:58 PM ---------- Previous post was at 12:55 PM ----------
Sorry to make this as another post
After downloading from that site the app is old edition.
After installing, check updates and you get latest hisuite app with material design with more features.
If anyone wants, I can upload the app which is 30+mb
bluheart said:
This is something that Sony had done with two hidden partitions FOTA and TA . This makes the device unbrickable and also.Have the OEM ways to keep the boot locked with hidden features.
Hisuite latest Windows app has these features to restore and when I tried,it scanned my.phone and found.My.phone to be working fine.
1) start the hisuite App on pc
2) connect to the phone in fastboot mode
3) restore
4) the app scans and looks for the partitions and then restores the bricked phone ONLY
---------- Post added at 12:58 PM ---------- Previous post was at 12:55 PM ----------
Sorry to make this as another post
After downloading from that site the app is old edition.
After installing, check updates and you get latest hisuite app with material design with more features.
If anyone wants, I can upload the app which is 30+mb
Click to expand...
Click to collapse
Duraaraa I was wondering if the suggestion from Bluheart resolved your issues
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
Duraaraa I was wondering if the suggestion from Bluheart resolved your issues
duraaraa said:
Could anyone please help me out? I have a bricked device and am looking into how to unbrick it.
I'm particularly interested if the English version of HiSuite which says it supports the L09 and L29 actually does.
Could anyone with an L29 or an L09 please put their device in fastboot and try the system recovery from hisuite:
http://consumer.huawei.com/minisite/HiSuite_en/
A new version which supposedly supports the phones was released.
Could anyone confirm if this works?
Click to expand...
Click to collapse
Hi, I have a mate 8 NXT-L09 with C212B120 firmware, I tried the procedure you describe because I unlocked the bootloader, installed TWRP and rooted only to discover I did not like the out come, I lost some functionality of the huawei themes app and now I like to go back to its original out of the box state, to make long story short (not really), the huawei tool says it doesnt recognize the device and that I should take it to them for repairs, I tried this while i had TWRP and also while I had stock recovery on the device.
I wonder if it doesnt recognize the device because its rooted or with an unlocked bootloader?, im tempted to unroot and relock the bootloader and see if that will do the trick?, if i try this ill let you know what goes.
Cheers.
rom stock l09c212b120
danywalkert said:
Hi, I have a mate 8 NXT-L09 with C212B120 firmware, I tried the procedure you describe because I unlocked the bootloader, installed TWRP and rooted only to discover I did not like the out come, I lost some functionality of the huawei themes app and now I like to go back to its original out of the box state, to make long story short (not really), the huawei tool says it doesnt recognize the device and that I should take it to them for repairs, I tried this while i had TWRP and also while I had stock recovery on the device.
I wonder if it doesnt recognize the device because its rooted or with an unlocked bootloader?, im tempted to unroot and relock the bootloader and see if that will do the trick?, if i try this ill let you know what goes.
Cheers.
Click to expand...
Click to collapse
bunas danywalkert mira tengo un mate 8 de iusacel de fabrica venia con nxt-l09c212b120 y lo actulice a ala vercion b170 peor no hice un back up =( ahora tengo la vercion nxt-l0900b170 y tengo algunos errores como el de temas y otros mee gustaria saber si puedo regresar ami rom original y como le puedo hacer ? me podrias pasar tu backup o donde podria conseguir la rom original espero me puedas ayudar de ante mano muchas gracias.
Sorry amigo, only english is allowed in this forum.
alangastic said:
bunas danywalkert mira tengo un mate 8 de iusacel de fabrica venia con nxt-l09c212b120 y lo actulice a ala vercion b170 peor no hice un back up =( ahora tengo la vercion nxt-l0900b170 y tengo algunos errores como el de temas y otros mee gustaria saber si puedo regresar ami rom original y como le puedo hacer ? me podrias pasar tu backup o donde podria conseguir la rom original espero me puedas ayudar de ante mano muchas gracias.
Click to expand...
Click to collapse
Hi there, sorry for taking this long, didnt realize I had a message on this thread, hopefuly you already fixed your situation, if not, let me know, for sure I can help.
Saludos.
Hello friends of the forum xda developers Instead, this forum is a newbie Needed to take a doubts:
I have a mobile model with windows 10 installed that is stopped in the drawer without use
He has put windows phone 10
I would like to change it on an Iphone with COMPATIVEL System OR ate pie android EVEN Instalar 9,0
I wonder if this is possible and what procedures to take I assume of all the risks ok
Other question:
I have a moto g5 plus and the Manufacturer Promised me an Update for the oreo 8.1.0 but until the moment nothing arrived and the artist said that it has already been released but up to the moment without conditions of receipt
There is a rumor that will be released only in September
Someone confirms this information
I await any response
Marcelo - DJ KUKA
djkukapr said:
Ola amigos do forum xda developers
Primeira vez que participo deste forum e sou novato
...
Click to expand...
Click to collapse
This is an international forum , you should speak English to be understood and helped.
Hello.
Hey someone knows anything about the version "J4" without the "+" i have one, the Samsung Galaxy J4 Model: SM-J400M i'm trying to unlock the bootloader using this instructions but i do the thing but nothing happend. Also i tried changing the date, resetting the phone or enabling and disabling the knox feature etc etc... but the OEM line does not appears in developer options.
Specs info: CPU-Z
help?
Also the phone it tends a lot of random unexpectedly shutting down, especially playing games... :crying:
kapmino269 said:
Also J4+
Does your phone support treble Rom ?
Click to expand...
Click to collapse
How i can check that?
kapmino269 said:
Write in play store
check treble
And download app .
Click to expand...
Click to collapse
supposedly Yes.
New Picture. https://prnt.sc/n26sz5
kapmino269 said:
@Jorgeapp
Upload picture in another site this site is unsafe or upload it by xda labs apk .
I can't find picture in that site .
Also you don't need to ask for that just google "how to check treble support ".
Click to expand...
Click to collapse
I finally finish the Prenormal RMM state and when i turn ON the OEM unlock the phone restart and return to the factory mode, i check again and the OEM unlock is missing like nothing happend... i dont know what to do, no one has rooted my device... all tutorials are for others models. i also try using kingroot and similars and nothing.
what a disappointment.
Jorgeapp said:
I finally finish the Prenormal RMM state and when i turn ON the OEM unlock the phone restart and return to the factory mode, i check again and the OEM unlock is missing like nothing happend... i dont know what to do, no one has rooted my device... all tutorials are for others models. i also try using kingroot and similars and nothing.
what a disappointment.
Click to expand...
Click to collapse
Hi! I've the same model as you, and it looks like samsung it's updating without the option now.
I wrote about this about 2 month ago i think, if you want you can read it here:
https://forum.xda-developers.com/general/help/oem-t3892877
But, if you want modify some layers read about Andromeda and Substratum here:
https://forum.xda-developers.com/apps/substratum/official-starting-substratum-andromeda-t3798316
kapmino269 said:
Reflash stock and try again alo you can root your j400f:
Unlock oem from DEVELOPERS DEVELOPERS OPTION
Then
- Go to download mode .
-Flash this with odin .
https://github.com/TwrpBuilder/andr....2.3-TwrpBuilder-j4ltejx-2018-10-22_17-38.tar
-Reboot twrp recovery.
-Then flash this by twrp
Rmm disable security :
Link:
https://forum.xda-developers.com/attachment.php?attachmentid=4481843&d=1524258795
-then flash magisk :
Link:
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
---------- Post added at 08:52 PM ---------- Previous post was at 08:49 PM ----------
Don't flash stock send picture from download mode may by another phone and upload it .
Click to expand...
Click to collapse
wow.. i just bought this phone and want root access due to dev needings. i study programming and i was looking for twrp and some way to get root. and you just posted this!. :laugh::laugh::highfive:
just want to know if this works? becuase i already found twrp for the j4+ but was looking for the normal J4.
also i need to learn everything about the prenormal stuff and all that before rooting. but you're a lifesaver.
kapmino269 said:
Flash RMM-State_Bypass_Mesa_v2.zip after installing twrp .
Click to expand...
Click to collapse
I'll do soon as I can.
Forgot to say.. how do you enable oem unlock on this device? Do I have to wait a whole week with it turned on? I want all the necessary information before installing TWRP and rooting. Also.. what about Android pie? Because Samsung posted that they will update this device to Android Pie, same for the j4+ one. I don't want to softbrick the phone or lose root when updating.
Sent from my Samsung SM-J400M using XDA Labs
Alguien tiene algun kernel para el j4lte que funciome para el nethunter ?
Es lo mismo J400 M que J400F
No entiendo ,porque parten hablando del j400 M y terminan dando remedios para el J400 F ....
Just came here as a way to thank everyone for this thread and say that the twrp for j4lte works perfect fine for SM-J400m on latest version android 10. Just enable OEM lock and flash it through ODIN.
[QUOTE = "endmjwknj, postagem: 84400367, membro: 11390151"]
Vim aqui como uma forma de agradecer a todos por este tópico e dizer que o twrp para j4lte funciona perfeitamente bem para SM-J400m na versão mais recente do Android 10. Basta habilitar o bloqueio de OEM e atualizá-lo através do ODIN.
[/CITAR]
can you help me install twrp on android 10 on j400m?
can you help me install twrp on android 10 on j400m?
brunoyp said:
[QUOTE = "endmjwknj, postagem: 84400367, membro: 11390151"]
Vim aqui como uma forma de agradecer a todos por este tópico e dizer que o twrp para j4lte funciona perfeitamente bem para SM-J400m na versão mais recente do Android 10. Basta habilitar o bloqueio de OEM e atualizá-lo através do ODIN.
[/CITAR]
can you help me install twrp on android 10 on j400m?
Click to expand...
Click to collapse
i could but there are guys who are more experienced to help you through all the process. Join this telegram group https://t.me/SamsungGalaxyJ4 and they're certainly assist you without a doubt.
Exynos Galaxy J4 is kind of similar to J3 2017 in terms of chipset and resolution so TWRP and ROMs of J3 2017 may work on J4.
Samsung Galaxy J3 (2017) ROMs, Kernels, Recoveries
Improve your Samsung Galaxy J3 (2017)'s battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
I hope someone can make a tutorial to unlock BL and get root permission。So that people can better use the black shark mobile phone
ÿeah, me too
......
johnny886 said:
中国人已经成功测试了与《黑鲨3》系列相同的解锁方法,但他们不会免费共享信息!
----------
MOD EDIT: English Translation Below
The Chinese have successfully tested the same unlocking method as the "Black Shark 3" series, but they will not share information for free!
Click to expand...
Click to collapse
I feel sad.
johnny886 said:
中国人已经成功测试了与《黑鲨3》系列相同的解锁方法,但他们不会免费共享信息!
----------
MOD EDIT: English Translation Below
The Chinese have successfully tested the same unlocking method as the "Black Shark 3" series, but they will not share information for free!
Click to expand...
Click to collapse
Well is it the same way and files? If it works like the black shark 3. I think you would need a different twrp but it should work the same.
johnny886 said:
中国人已经成功测试了与《黑鲨3》系列相同的解锁方法,但他们不会免费共享信息!
Click to expand...
Click to collapse
It's actually free, but you didn't find it
求教程
http://www.viprom.cn/list/6706.html Here's the black shark 3 unlock tutorial
没有人一样,这手机只在国内发了吧?
ZaneCode6574 said:
没有人一样,这手机只在国内发了吧?好像是···
Click to expand...
Click to collapse
Dont waste your money, Think before you buy. They NEVER released BLACK SHARK 1,2,2PRO,3,3PRO,3S KERNELSOURCES. I think YouTube reviewers need to point that as well
Jbazt_katuforzs said:
Dont waste your money, Think before you buy. They NEVER released BLACK SHARK 1,2,2PRO,3,3PRO,3S KERNELSOURCES. I think YouTube reviewers need to point that as well
Click to expand...
Click to collapse
Personally I don't need sources, but just TWRP to debloat. I would be fine with the regular ROM
I just use this phone for gaming like if it was a videoconsole, for customizing I have my POCO F1 as my daily driver.
anyone who tried this?
How to Root Xiaomi Black Shark 4 – Two Working Methods!
In this guide, I will show you how to root Xiaomi Black Shark 4 using magisk. Because in this article we will share with you working method.
magiskupdate.com
migsymigs said:
anyone who tried this?
How to Root Xiaomi Black Shark 4 – Two Working Methods!
In this guide, I will show you how to root Xiaomi Black Shark 4 using magisk. Because in this article we will share with you working method.
magiskupdate.com
Click to expand...
Click to collapse
That is a useless placeholder site, that just uses each brand and model and sets the exact same page for the effect
They say "download the latest TWRP from twrp.me" but obviously, there is not TWRP for Black Shark 4 yet (and I have my doubts it will ever be since generally Black Shark phones have been mostly disregarded in terms of development since core kernels are never released)
Let's see how it goes.
aa2994576 said:
I hope someone can make a tutorial to unlock BL and get root permission。So that people can better use the black shark mobile phone
Click to expand...
Click to collapse
You need a modified firehose to flash in edl to unlock BL. Google helps on how to do this
The method isn't even "chinese" but from qualcomm (basically for oem's).
Jbazt_katuforzs said:
Dont waste your money, Think before you buy. They NEVER released BLACK SHARK 1,2,2PRO,3,3PRO,3S KERNELSOURCES. I think YouTube reviewers need to point that as well
Click to expand...
Click to collapse
Well most youtubers (especially those reviewing 100000$ phones) get those phones from oems and oem's dont like the custom rom development--> they will just cut the free phones for the reviewers (kinda like Nvidia tried with hardware unboxed). Also those reviewers probably cant even install a custom rom....
MiSSigNNo said:
Personally I don't need sources, but just TWRP to debloat. I would be fine with the regular ROM
I just use this phone for gaming like if it was a videoconsole, for customizing I have my POCO F1 as my daily driver.
Click to expand...
Click to collapse
Don't debloat a phone without any possibilities of getting back a working stock rom from oem with TWRP (also debloating in TWRP on a phone with super partition will break everything, leaving u with a 700 bucks paper weight) use magisk and system app debloater (if sth goes wrong disable module/root and you are back to stock)
Do you feel save with a recovery (which can easily be modified to always have access to everything u do on the phone) without any sources and from some shady chinese guy who wants to make money with it? He could just remotely lock your phone and make you pay to get the unlock token... and then do it again xD
With kernel sources you will also get a working and propper TWRP recovery, without you will always be bound to stock kernel (which you cant update bcs blackshark doesn't supply stock roms/doesn't update rooted phones) at least...
wertus33333 said:
You need a modified firehose to flash in edl to unlock BL. Google helps on how to do this
Click to expand...
Click to collapse
Can you elaborate on this? I have not found anything relevant regarding this topic
MiSSigNNo said:
Can you elaborate on this? I have not found anything relevant regarding this topic
Click to expand...
Click to collapse
https://github.com/Naveen3Singh/BLUnlocker but bs does not have official stock firmware downloads... so wait for a mayor (android) update until you update your phone to get the update download link using adb
Compré la versión china de Black Shark 4 y no la versión global, el problema que lo hace va fatal, el GPS no funciona bien, los servicios de google tampoco, ¿hay alguna forma de pasar la rom china a la rom global? No he encontrado una forma en ninguna página todavía, si alguien pudiera ayudarme con esto lo agradecería, o al menos alguien que me enseñe cómo erradicar los servicios de Google o cuál es la mejor manera para que funcionen No es necesario root o instalar twrp porque hasta ahora es imposible
Español
Compré la versión china de Black Shark 4 y no la versión global, el problema que lo hace va fatal, el GPS no funciona bien, los servicios de google tampoco, ¿hay alguna forma de pasar la rom china a la rom global? No he encontrado una forma en ninguna página todavía, si alguien pudiera ayudarme con esto lo agradecería, o al menos alguien que me enseñe erradicar los servicios de Google o cuál es la mejor manera para que funcionen sin necesidad de ser root o instalar twrp porque hasta ahora es imposible