Related
So.. here goes my problem..
Got my Qtek 8310 three days ago, and the very same day I got it, decided to upgrade from WM5 to WM6. However, the battery charge meter gave me wrong info about the battery charge percentage, and the phone battery died just after I formatted the BINFS and re-setted the device in TeraTerm.
The device still powered on, after each USB cable re-insert, but died, after 5-10 seconds. After a couple of attempts, the phone didn't turn on at all.
Did some info search on the web and found out, that my battery fell to an critical voltage level. Li-Ion batteries require a certain voltage to even be able to accept a charge.
As I got an non-original battery (Sanyo ST26C) I suppose it is poorly designed and doesn't have good under-voltage protection (I have read about other HTC models (e.g. Wizard) having this problem as well), so the battery dropped below these limits and phone now identifies the battery faulty and doesn't let it charge. This is for consumer safety, because attempting to charge damaged Li-Ion cells can be dangerous, as Lithium is known to be able to catch fire/explode.
So the phone doesn't let to charge the battery in any way (1amp wall charger or USB cable).
Anyways, I tried to jump start the battery (charge with bare wires) to give it initial charge and... it worked. However, there goes my main problem: As soon as I insert the battery which has the initial charge, the phone starts immediately and boots to a bootloader (as there is no OS, formatted BINFS) and the the phone does not charge while in bootloader.
Then, I tried to turn off the phone: Hold down power off button for 5 seconds - phone turned off. But as soon, as I release the button, red light flashes once (as it does everytime, when you try to turn on the phone, it's normal) and then orange LED comes for a second, indicating a charge (as the battery is no longer considered faulty - phone lets it to charge), BUT then phone starts again to the bootloader and it somehow prevents further charge.
So: as soon as I release the power off button, after the phone has shutdown, it starts again, everytime, and soon the battery dies again.
My own thoughts of solving this:
* Get a fully charged battery from a friend, install the windows on the phone, and then charge my own battery (I know noone, who may have HTC Tornado, will be hard to get);
* Buy some standalone dock charger, which can charge batteries directly and charge the battery happily (haven't seen any around yet, so will be really pain in the arse, to get one);
* Charge battery with bare wires for an extended period of time, to give it enough juice to install windows (which I strongly doubt, as battery damage could occur);
Any other ideas? Ideas and comments, from people who know, or had similar experience is more than welcome. Looking forward for answers
Its funny. Reading you I've realized what people tell me about "I make a question and I answer it myself" So... You have the answers my friend. For options 1 and 2, use E-Bay. As a matter of fact, there is an aftermarket charger in ebay that charges your phone and a spare battery and it includes the spare battery when you buy the charger. I believe it runs for under $20.00. For option 3 use some wood cloth pins(those used to hang cloth to dry). I would say with at least 2hrs charge you should get a good 50% charge on your battery, enough to flash your phone.
Edit: Here is an Ebay Search. But, keep searching till you find the one that includes the extra battery. Chances are your battery is no good or won't last you very long.
Good Luck!
Get a new battery man, these li ion batteries, are no joke, especially the fact that they are made in China/Taiwan, I myself had used a tornado battery even till the days when the battery has bloated and cracked the back cover, when a single charge could not even last 4 hours.
Those days, were like having a timebomb in your pocket, ended up I got mysel a new tornado at a price cheaper than a replacement battery.
markanthonypr said:
Its funny. Reading you I've realized what people tell me about "I make a question and I answer it myself" So... You have the answers my friend.
Click to expand...
Click to collapse
Well yes, I have some suggestions, but I am also expecting others to have some, too. And by sharing the knowledge, maybe I could prevent myself to spend more money on this issue
markanthonypr said:
For options 1 and 2, use E-Bay. As a matter of fact, there is an aftermarket charger in ebay that charges your phone and a spare battery and it includes the spare battery when you buy the charger. I believe it runs for under $20.00.
Click to expand...
Click to collapse
The main problem with e-bay is... my country. at least 80% of the items, don't ship to my location.
markanthonypr said:
For option 3 use some wood cloth pins(those used to hang cloth to dry). I would say with at least 2hrs charge you should get a good 50% charge on your battery, enough to flash your phone.
Click to expand...
Click to collapse
Thanks for the suggestion. The main reason why I am in serious doubt about this option, is that standard chargers usually have some sort of regulators and monitors the charge, prevents from overcharging, etc. But on the other side, USB charge output is only 100 mA, so it couldn't be that bad if you think about it
karhoe said:
Get a new battery man, these li ion batteries, are no joke, especially the fact that they are made in China/Taiwan, I myself had used a tornado battery even till the days when the battery has bloated and cracked the back cover, when a single charge could not even last 4 hours.
Those days, were like having a timebomb in your pocket, ended up I got mysel a new tornado at a price cheaper than a replacement battery.
Click to expand...
Click to collapse
Well, the fact, that it is manufactured in China actually says nothing Many companies choose China to manufacture their products because of low costs. And the most of electronics is manufactured in China and other Asian countries.
Anyway, before getting myself an new battery, I would like to try resurrect this one If this won't last long for me - no problem, I will get an new one. But until I'm convinced enough, it's a waste of money, which I don't like doing
And one more thing.. maybe someone knows a way to keep the phone power off?
Because as I said earlier on, it's charging only when it's turned off, and not in the bootloader. And problem is that, as soon as I put the battery, it starts-up the bootloader.
Get a desktop charger perhaps?
Or if you are adventurous enough, mod the USB cable, and charge the battery directly, only if you know what you're doing, and only if it works
karhoe said:
Get a desktop charger perhaps?
Click to expand...
Click to collapse
Well.. thanks for the answer, but we've already discussed this option and now I am asking whether or not, someone knows a way to turn off the phone and keep it turned off (prevent from self startup) while the phone has no OS (got formatted BINFS).
karhoe said:
Or if you are adventurous enough, mod the USB cable, and charge the battery directly, only if you know what you're doing, and only if it works
Click to expand...
Click to collapse
I've already done that, and yes, it works. But I need someone to confirm, if it is safe enough to charge the battery for an hour or two.
Have anyone tried that?
I don't think that it's very safe. But I was having a similar problem, and I just left the phone connected to the power cable, and even though it seemed like it was not charging, it apparantly was.
Or you could just get a new battery. On expansys I saw a new one for ~$20.
nav1 said:
I was having a similar problem, and I just left the phone connected to the power cable, and even though it seemed like it was not charging, it apparantly was.
Click to expand...
Click to collapse
Well..
With a modified USB cable (bare wires), which got power output of 100mA I have charged battery directly for approximately 3 minutes, and the phone turned on, and was operational for 4-5 minutes until the battery died again.
And before that, I've tried leaving it on an mains charger, which got power output of 1A (1000mA, 10 times USB). I left it for a hour or two, although no led was showing up to indicate a charge. The phone didn't event turn on after this 2 hour "charge".
And the reason for this is explained in my first post. Will try to leave it charge over a night, though, expecting for a miracle
nav1 said:
Or you could just get a new battery. On expansys I saw a new one for ~$20.
Click to expand...
Click to collapse
But new batteries usually come empty, so it's no use to me. I have also explained why, on my previous posts.
So before buying an cradle charger, I would like to find out if these budget-friendly solutions will work:
1) Find out how to keep the phone powered down (because it's the only moment, when it truly charges);
2) Find out if it is safe enough to charge battery with bare wires for extended period of time (1-2 hours);
Just came up with another idea. Searched the forums and found a very similar problem to mine:
fritzgerald said:
For some odd reason my wizard likes to say the battery is full when its actually dead and that it's dead when it's really full. Well a few days ago I was reflashing to try and take care of the issue and it died during the middle of flashing. It would only goto the bootloader screen and would not charge. Well I decided I'd post a few pictures of my recovery technique utilizing my wife's phone. Cat5 cable striped at the end and twisted to each of the positive and negative battery terminals and the Blackberry's battery put it so I could use it to power the wizard.
Click to expand...
Click to collapse
So.. I've got a Sony Ericsson w810i, would this technique work? The w810's battery is Li-Polymer, 900mAh 3.6V (although some sources say, that this exact battery is 3.7V..), compared to Li-Ion 1150mAh 3.7V Tornado's battery.
Voltage seems suitable..
Haven't got any answers to my previous posts, so I tried.
The trick worked, Sony ericsson's battery can feed HTC Tornado perfectly. However... got another problem..
Here's how I wired it up. The positive wire takes two contacts and the negative takes another two aswell. The ends of the wires are then connected to the sony ericsson's battery. Phone starts, and boots to a bootloader. Everything's seem to be perfect.
Then I plug in the USB cable into the computer, the other end to the phone. Phone recognizes the cable and puts label "USB" at the bottom of the screen.
However, there's something wrong with the connection.. TeraTerm fails to connect and Update ROM utility fails, too, with an "cannot connect" error..
After that, I have tried using the original battery, with no wires attached, just plugged it in (gave it an initial charge again) and the USB worked without any problems: TeraTerm can connect.
So the problem seems to be in wiring.
I have tried to connect the wires in different random ways (crazy, I know), but only one alternate way did worked. Although, phone did heat-up rapidly at the area, where it says "HTC Innovation" and phone's display showed "USB" even if no USB cable was connected.
So.. looking forward to some thoughts or any knowledge, of why is this happening, wiring schemes, or any other suggestions..
FINALLY! SUCCESS!! I've connected the wires from the sony ericsson's battery to touch only one pin on the phone, instead of two, as shown in the picture. The phone didn't turn on, as I've tried this before.
But then remembered that the same pins charge the original battery, so inserted the battery and VOILA! Phone turned on to the bootloader and the USB circuit wasn't blocked no more! Flashed the phone to WM6.5 now successfully and the original battery is charging, as I write this post )
So, if anyone got HTC smartphone dead, while flashing, let me know, will try to help you out, since I've walked through this hell myself
Thanks goes to karhoe, for an excellent guide for flashing, also dharvey4651 for an excellent guide on installing vista's USB drivers (got new PC, upgraded to vista) and last, but not least - the whole XDA-developers community for helping me out
1A Wall Charger Works!!
I've had the same problem discussed above. I was trying some of my own 6.5 ROMs, which by the way were getting stuck at the initial boot screen itself. Due to some unavoidable reasons and circumstances, the phone freely was left to itself at this exact state, untethered to any power source, for extended periods of time, during which it slept and refused to wake up again, all my pleadings going in vain. And when it did boot, it went into the tricolor screen conveniently and switched off in ten seconds. I turned to the net for help and found that any charger with rating above 1A would help in giving it the required juice. I didn't want to waste any of the 6 USB cables I have.
I got the original charger, which is an 1A charger, after 2-3 hours of searching my room (Hey, Don't be too hard on me! In the end, I got it, right? Actually, I use the PC for charging, and a smaller 550mA one sometimes-- both didn't work this time) and then, when I connected it showed the screen again. But this time, I found that it was capable of running it without the battery being present.
So, all I did was I kept the charger connected to it with the phone switched on in the tricolor mode and with the battery inside. After half an hour, I tethered it to the PC and flashed a proper ROM. And Voila!!! IT WORKED!! It was 2.45 in the morning!!
I guess the power from the 1A charger is enough for the phone to run and charge it too which is not the case in the 550mA one and the USB cable.
rajathvsm said:
I've had the same problem discussed above. I was trying some of my own 6.5 ROMs, which by the way were getting stuck at the initial boot screen itself. Due to some unavoidable reasons and circumstances, the phone freely was left to itself at this exact state, untethered to any power source, for extended periods of time, during which it slept and refused to wake up again, all my pleadings going in vain. And when it did boot, it went into the tricolor screen conveniently and switched off in ten seconds. I turned to the net for help and found that any charger with rating above 1A would help in giving it the required juice. I didn't want to waste any of the 6 USB cables I have.
I got the original charger, which is an 1A charger, after 2-3 hours of searching my room (Hey, Don't be too hard on me! In the end, I got it, right? Actually, I use the PC for charging, and a smaller 550mA one sometimes-- both didn't work this time) and then, when I connected it showed the screen again. But this time, I found that it was capable of running it without the battery being present.
So, all I did was I kept the charger connected to it with the phone switched on in the tricolor mode and with the battery inside. After half an hour, I tethered it to the PC and flashed a proper ROM. And Voila!!! IT WORKED!! It was 2.45 in the morning!!
I guess the power from the 1A charger is enough for the phone to run and charge it too which is not the case in the 550mA one and the USB cable.
Click to expand...
Click to collapse
Glad to hear that it worked for you Unfortunately, it didn't for me (as I only have an after-market charget, not the OEM one, although it is 1A), so I had to search for alternative methods.
Anyone come across this? I put it on standby last night after reading a bit of my book on it, and it had around 50% power remaining. This morning, it was totally unresponsive; pressing the power button does nothing at all. I've charged it for 12 hours in the meantime.
I've done the following all with and without the power attached:
- Pressed and held power for 15 seconds through to a minute
- Pressed and held volume up with power to attempt to get into recovery for up to a minute
- Pressed and held volume down with powerfor up to a minute
- Pressed and held power while touching screen (read that one off another forum)
I guess potentially it could be on and in a crashed state and unresponsive to the power, so maybe in a weeks time when it runs out of juice, I'll be able to charge it and power it back up, but in the meantime, I'd welcome suggestions.
A few weeks ago I updated it to the official ICS build that was released, but did the update myself rather than using KIES, as KIES didn't even recognise my Tab's firmware original version. It's been absolutely fine before the update, and since. I only mention it because I've read about the Samsung build of ICS being prone to self bricking itself, but I couldn't determine what the symptoms of this vulnerability were.
Thanks for any help offered,
Will
did you try connecting USB cable and plugging it into your PC? did u get any activity? can ADB recognize your tab?
I think your tab just ran out of juice and the battery's protection circuit has kicked in. Try taking it to an electronic shop and plugging in different chargers preferably one with an output more than 2.1 amps to kickstart the charging. Plug it in and wait till the charging animation starts.
Sent from my GT-P6800 using xda premium
Had the same problem while on holidays. Once the battery goes below a certain level, you won't be able to charge it through USB any more. Instead you need to use the wall charger.
I think it's bad enough that the 7.7 doesn't have a micro USB port, but things like that are just stupid and Samsung made a big mistake here. It don't think it's the same with the newer tablets though. It's also not possible to just buy cables or chargers for this strange Samsung port, so when you forget your wall charger at home at some point you won't be able to use your tablet any more.
As long as you charge with the USB cable early enough, you can avoid it though.
A few months ago I experienced the same thing, the Tab just wouldn't turn on anymore.
I tried all there is without any luck.
Contacted amazon and they replaced it with a new one in less than 48 hours.
So far not Problems with the new device.
I have the P6800 and this morning I took it off charge. Put it into standby and only used it for about 20 mins then left in standby all day. It had about 95% remaining when I did so.
Picked it up this evening and the lower left area of the screen was warm and it would not switch on. Didn't think of the ADB idea but will try this next time but I had to reset it and when it powered on tonight after the reset, it was down to 15%. Within about 2 mins of checking stuff it was down to 3%.
Something is running when it is in standby but as I can't switch it on I can't check with BetterBatteryStats or CPUState to know what is wrong.
It does this every day. I am tempted to do a factory reset and reinstall only limited software.
Dave...
I see this thread is a little old but this has just happened to my P6810 too. A pity nobody reported back what the end result was.
My device had at least 95% battery last night but today I can't get it to respond at all, I've tried the wall charger and still nothing.
Anything else someone could suggest for me?
Edit. I tried getting anything from it connected to my PC but it couldn't find a device there. However I then tried it on the wall charger again and now get a blue battery icon, quite big, with a five step animation indicating that it is charging.
No idea how it went flat as the battery on this lasts a long time assuming the screen isn't on. When it boots properly I'll have a look at what the most recent apps I installed were as it has only done this once. Before this it has been perfect for the three weeks I've had it.
Cluey said:
I see this thread is a little old but this has just happened to my P6810 too. A pity nobody reported back what the end result was.
My device had at least 95% battery last night but today I can't get it to respond at all, I've tried the wall charger and still nothing.
Anything else someone could suggest for me?
Edit. I tried getting anything from it connected to my PC but it couldn't find a device there. However I then tried it on the wall charger again and now get a blue battery icon, quite big, with a five step animation indicating that it is charging.
No idea how it went flat as the battery on this lasts a long time assuming the screen isn't on. When it boots properly I'll have a look at what the most recent apps I installed were as it has only done this once. Before this it has been perfect for the three weeks I've had it.
Click to expand...
Click to collapse
This is the infamous Sleep-Of-Death issue that is randomly experienced by myself and other users here, usually happens when WiFi bugs out due to weak signal
TeeeJaay said:
This is the infamous Sleep-Of-Death issue that is randomly experienced by myself and other users here, usually happens when WiFi bugs out due to weak signal
Click to expand...
Click to collapse
hhmmm, interesting.
I was having trouble with wifi just before this happened. Both my GS2 and this have been claiming to connect to my wifi but aren't actually getting an IP address from it.
I can't remember if it was last night or the night before but I manually set an IP address, the signal strength is fine as my abode isn't very big.
After it has recharged I'll have a poke and see what I can find, thanks for the reply.
So my device seems to be working fine again. It had gone SO flat that the date and time were incorrect!
After I could power it on I had a look at Better Battery Stats and nothing looked wrong so I have no idea what happened. None of the apps I'd installed the day before it played up had long wakelocks and weren't running when I turned it off.
For reference they were:
My Tracks
MyTrails
Google Earth
AndSMB
I'd turned both of the GPS tracking devices off before I turned it off for the night.
It hasn't played up since but it hasn't been long so I'll see what happens.
Yeah, the sleep of death is incredibly annoying. Honestly, the GTab 7.7 is a **** device. Samsung made way too many mistakes and won't do anything to fix it.
A similar thing happens to me every once in awhile. The way i check to make sure everything alright is to see if it boots into download mode. I just leave it plugged in for a couple hours and it eventually comes back on.
someth1ng said:
Yeah, the sleep of death is incredibly annoying. Honestly, the GTab 7.7 is a **** device. Samsung made way too many mistakes and won't do anything to fix it.
Click to expand...
Click to collapse
this is why my 7.7 is the last tablet/phone from Samsung i'll never trust them they are just bombarding the market with new devices and leaving the old ones to dust
^thats what I thought too but that gs4 is really tempting. I've heard worse about HTC in that regard anyways so that why I'm not going with the one.
Finally.. i bought Sony xperia Z.
I'll sell my galaxy tab 7.7. I.m very disappointed with samsung.
Sent From XPERIA Z
kishd said:
I think your tab just ran out of juice and the battery's protection circuit has kicked in. Try taking it to an electronic shop and plugging in different chargers preferably one with an output more than 2.1 amps to kickstart the charging. Plug it in and wait till the charging animation starts.
Sent from my GT-P6800 using xda premium
Click to expand...
Click to collapse
Unbelievable! ... this trick still works ... thank you very much for you help ...
^^ yo, this 'trickle charge' trick did NOT work on my (long) dead P6800... any other suggestions??
Quite strange because my Samsung GT-P6800 tablet was fully charged, it went completely blank dark as if it was off. To my amazement, SMS keeps dropping and calls kept coming in. Yet it is still as blank as though the tab was off. I pressed the power button and the volume up bottom for it to reboot. It rebooted without the screen coming up. It has been blank for two days now. What could be the cause? And what possible solution can be given?
Hey all, I just got through with this hurricane sandy business and now I find my phone not working at all. First off I'd like to say that there is no water damage to this phone and it is NOT rooted. The problem is that it just won't turn on at all, and won't charge when I try to charge the device. The day before I charged the phone and it worked fine. I can provide more details if needed but I need to find a solution to this.
Did it run down on battery completely before it did this? You might need to charge it for a bit before it turns on. Also, see if you can get your hands on a spare battery to see if it's the battery's problem. I would also try removing the battery and putting it back just to make sure it wasn't jostled loose.
bananagranola said:
Did it run down on battery completely before it did this? You might need to charge it for a bit before it turns on. Also, see if you can get your hands on a spare battery to see if it's the battery's problem. I would also try removing the battery and putting it back just to make sure it wasn't jostled loose.
Click to expand...
Click to collapse
Two days ago I completely let the battery drain on its own because it was draining faster than usual and I was using it very minimally due to the lack of phone signal during the power outage. And yesterday I charged it until it was 100% in the morning and at night I charged it again until 100%. Before I went to bed, I turned off my phone and it was 90% and when I turned it on in the morning it was at 77% (which I thought was weird since the phone was not even on). Now the phone will not work at all. I took the battery out and everything. I even tried turning the phone on while trying to charge it (but it would not charge). The only feedback I got was that it vibrated when I tried turning it on this afternoon and after that was nothing. (it would either get stuck at the AT&T bootup part or I would get no display at all)
mpvsuperstar said:
Two days ago I completely let the battery drain on its own because it was draining faster than usual and I was using it very minimally due to the lack of phone signal during the power outage. And yesterday I charged it until it was 100% in the morning and at night I charged it again until 100%. Before I went to bed, I turned off my phone and it was 90% and when I turned it on in the morning it was at 77% (which I thought was weird since the phone was not even on). Now the phone will not work at all. I took the battery out and everything. I even tried turning the phone on while trying to charge it (but it would not charge). The only feedback I got was that it vibrated when I tried turning it on this afternoon and after that was nothing. (it would either get stuck at the AT&T bootup part or I would get no display at all)
Click to expand...
Click to collapse
And nothing happened to it in between at all? That's very odd. The only thing I can think of to try is another battery.
Please post all questions in the Q & A section. Thanks! Thread moved.
Sent from my Galaxy Nexus using Tapatalk 2
bananagranola said:
And nothing happened to it in between at all? That's very odd. The only thing I can think of to try is another battery.
Click to expand...
Click to collapse
Nothing I can think of. It was fully charged by 9PM the other night and shut off before I went to bed. Next morning the batter is nearly halfway drained for no apparent reason. I think I will get another battery to test.
Also I let the battery sit out of the phone for a few days now and the phone still does not work.
Niavaran
mpvsuperstar said:
Nothing I can think of. It was fully charged by 9PM the other night and shut off before I went to bed. Next morning the batter is nearly halfway drained for no apparent reason. I think I will get another battery to test.
Also I let the battery sit out of the phone for a few days now and the phone still does not work.
Click to expand...
Click to collapse
***
Get a hold of a charged battery, then after 1 hour with no battery in the device, replace the battery remove the SD-Card and the SIM-Card, replace all covers. Reboot your PC and go to firewall tab in the control panel and turn of your firewalls, then reboot your PC, then using USB data cable not a charging cable.. with your device being OFF conect to a USB connection in the back of your PC, if it's a laptop use the one next to the intranet connection. Then wait about 1min. If nothing happwned, hold the volume down button then press and release the power button. if nothing happened, hold the volume up then press and release the power button. If nothing happened do the samething this time by holding both up and down volume buttons. If nothing happened with your device connected to the PC go to MY Computer tab right click on C>Properties then go to tools click on check disc tab check mark both options then restart your PC. Before windows tour OS starts, your PC will go through a self check. let it do its thing. it takes a couple of hours. then after its down check to see if it has seen your device. if not then do procedures above once again. GOOD LUCK.
PHP:
Okay so I finally got it to turn on but in order to charge it, the phone must be turned off for some reason. Also, the touch screen is not working, even after I did a hard reset and erased all my data. I'm not sure if it is a hardware issue or a software issue because the display is working fine.
lobig
mpvsuperstar said:
Okay so I finally got it to turn on but in order to charge it, the phone must be turned off for some reason. Also, the touch screen is not working, even after I did a hard reset and erased all my data. I'm not sure if it is a hardware issue or a software issue because the display is working fine.
Click to expand...
Click to collapse
That same thing happened to a friend of mine. She took it to a technician tho and they sorted it out for her.
Hello every one, this just my first post here, but I have been follow the forum very very close since some days ago thanks to Mustaavalkosta and his new CyanogenMod Rom here:http://forum.xda-developers.com/showthread.php?t=2533007&page=283.
I am having a similar problem with my HTC Inspire, here is my story. I bought it like it a year ago, the first thing I do was to rooted with AAHK and install CyanoyenMod cm-7-20130301-NIGHTLY-ace. Everything works just fine till a couple of months ago. One night I just leave my Inspire and go to sleep, the next morning I wasn't able to turn on, not charging, not turn on. Was not the battery because my brother has another Inspire and I check with his battery. I just leave the phone without the battery and Sim and SD for a day and them come back again, but at next day the same occurs. I try all that time, vol down+power. voldown+volup, every convination but nothing works. So I decide to dissensambly my phone... in the process I broke the ribbon flex cable http://www.ebay.com/itm/OEM-HTC-Desire-HD-Inspire-4G-Camera-Socket-Keypad-Membrane-PBC-Ribbon-Flex-Cable-/320925341841?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item4ab8a41891 The phone was in parts on my table like a month till I was able to buy and recieve the ribbon (I live in Colombia). Finally the ribbon arrives 3 days ago, so I assembled the phone again and...magic! the phone turns on. My next step was install the Mustaavalkosta Rom that I mentioned before.... but, yesterday, my phone was dead again. So a try all steps again, put out the battery, Sim and Sd... and again try all the combinations of buttons, but nothing works... So I do it again: dissensably again my phone: Only disconnecting the display doesn't works... I have to disconect the display and the ribbon cable, assembled again and just turn on again.... Now I am waiting for the next black out...
I know is a weird behavior, but may be some one can point me in some direction to fix it.. I am not a developer or anything like that, but I like to investigate and solve problems... any help will be wonderful.
Cheers!
PD: I dont have any apps installed, just trying the Rom as it is.
PD: The next time it happens I will try the niavaran advises.
Let me lay down the story first:
It all started when I tried out multiROM for the LG G3. I was running cm12 perfectly fine, unlocked and everything. Amazing battery life. But MultiROM barely worked, even though I followed the instructions exactly, I had many errors trying to get anything to boot properly. I got help with it, but ended up getting rid of multirom via internal storage (where it was) and flashing a normal, non modified TWRP 2.8.4.0. This is where stuff starts getting weird.
After getting rid of multiROM and flashing cm12 again from backup, I noticed my phone wouldn't take a charge at all. It was booted up and running at about 30% battery. My PC wouldnt do anything when I plugged it into my computer, too. I thought it was just Cyan being weird, so I rebooted into twrp and tried plugging in. No buzz, still wouldn't take a charge. For some reason, turning the phone off and plugging in the charger while it was off actually turned it on. So the charging port has to be working, the phones just being weird... but then I decided to smell the charging port. Smells like pure burning electronics. I rebooted the phone with the cable plugged in, and it boots up and charges. This is odd, because i can no longer plug the cable in while the phone is on, i have to reboot it with the cable in now in order to get it to charge. I tried flashing back to stock ROM, and same exact issue happens. Not only that, but the battery no longer holds a charge for more than a day on one full charge. It lasts about 3-4 hours now.
Please, xdaers, help a brotha out. I'm really pissed about whatever the hell is happening to my G3. It still works fine, I just have to reboot it with the cable in in order to get it to charge at all and the battery life sucks on top of that.
Note: One time after all this happened, the phone died fully. Plugging the charger in, the battery logo was flashing on and off. I tried multiple cables and chargers with the same problem. I pulled out the battery with the cable still in, and the battery logo actually stayed on the screen and once I put the battery back in, it charged again. THIS IS MAJORLY CONFUSING and hard to explain so I will clarify my issue if you are confused with my post.
Also, the phone likes to get really hot and die fast by itself even without the charger plugged in now.
thanks guys
Hi
Thanks for writing to us at XDA assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
http://forum.xda-developers.com/att-lg-g3
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
http://forum.xda-developers.com/att-lg-g3/help
Good luck!
So you flashtooled back to stock? And still persists? If so you next option is to buy both a battery and a charging port and do some trouble shooting.
2SHAYNEZ
King Ramen said:
Let me lay down the story first:
It all started when I tried out multiROM for the LG G3. I was running cm12 perfectly fine, unlocked and everything. Amazing battery life. But MultiROM barely worked, even though I followed the instructions exactly, I had many errors trying to get anything to boot properly. I got help with it, but ended up getting rid of multirom via internal storage (where it was) and flashing a normal, non modified TWRP 2.8.4.0. This is where stuff starts getting weird.
After getting rid of multiROM and flashing cm12 again from backup, I noticed my phone wouldn't take a charge at all. It was booted up and running at about 30% battery. My PC wouldnt do anything when I plugged it into my computer, too. I thought it was just Cyan being weird, so I rebooted into twrp and tried plugging in. No buzz, still wouldn't take a charge. For some reason, turning the phone off and plugging in the charger while it was off actually turned it on. So the charging port has to be working, the phones just being weird... but then I decided to smell the charging port. Smells like pure burning electronics. I rebooted the phone with the cable plugged in, and it boots up and charges. This is odd, because i can no longer plug the cable in while the phone is on, i have to reboot it with the cable in now in order to get it to charge. I tried flashing back to stock ROM, and same exact issue happens. Not only that, but the battery no longer holds a charge for more than a day on one full charge. It lasts about 3-4 hours now.
Please, xdaers, help a brotha out. I'm really pissed about whatever the hell is happening to my G3. It still works fine, I just have to reboot it with the cable in in order to get it to charge at all and the battery life sucks on top of that.
Note: One time after all this happened, the phone died fully. Plugging the charger in, the battery logo was flashing on and off. I tried multiple cables and chargers with the same problem. I pulled out the battery with the cable still in, and the battery logo actually stayed on the screen and once I put the battery back in, it charged again. THIS IS MAJORLY CONFUSING and hard to explain so I will clarify my issue if you are confused with my post.
Also, the phone likes to get really hot and die fast by itself even without the charger plugged in now.
thanks guys
Click to expand...
Click to collapse
Don't know about the charging port, but as far as battery life I'm getting the same thing, except mine lasts about 2 hours, I've decided I'm selling the phone while its still worth a bit of money, probably getting a Note 2 or Xperia Z2, I've been very unhappy with this phone, also my battery cover is falling apart and cracking,
SmokeyTech1 said:
Don't know about the charging port, but as far as battery life I'm getting the same thing, except mine lasts about 2 hours, I've decided I'm selling the phone while its still worth a bit of money, probably getting a Note 2 or Xperia Z2, I've been very unhappy with this phone, also my battery cover is falling apart and cracking,
Click to expand...
Click to collapse
Well I've had none of your problems. Note 2 or z2 is a downgrade. Have fun with that... Sucks your experience hasn't been a good one. Cheers
2SHAYNEZ
I get 13+ hours with 4 to 5 hours screen on time and 1to 2 hours of talk time. So I don't think your battery issue is normal for this phone. You have either a defective battery or phone or an app that is misbehaving.
I'm having the exact same problem with LG G3.
Can only charge when rebooted. And even then the charge indicator does not show charging.
I have to go into setting->battery where it shows 'charging'
I have tried new battery and cleaning port.
Anyone figure this out...?
My battery drained very fast before too after backed up to stock, but after I upgraded to 5.0, my phone can lives up to next morning!
Sent from my LG-D850 using XDA Free mobile app
Hi all,
My Nexus 5's battery was draining extremely fast and a factory reset / clean rom flash didn't help. So I decided to get a new battery. After installing the battery I found out the phone didn't boot. I opened up the phone again to double check all connectors I touched were in place and I even reconnected them just to be sure. My phone still didn't turn on so I hooked it up with my *original* charger and USB-cable. All I see is the charging screen (battery with lightning icon) and a few seconds later my phone turns off, only to repeat this cycle. I'm able to boot into the bootloader, the phone stays on but immediately turns off when I pull the charger. When trying a normal boot I see the Google logo and a few seconds later the phone turns off and falls back in its charging-screen-cycle.
I looked up some troubleshooting on the Google site (https://support.google.com/nexus/troubleshooter/3337561?hl=en#ts=3337943) but that didn't fix my problem either. What should I do?
The battery I ordered is an original LG TL-B9 battery.
Thanks in advance!
Are you sure the battery isn't shot or some hardware on your device isn't working
Try re-installing the old battery so that you can identify whether it's a dud new battery or if the phone itself is dead. A real pain, I know, but best to eliminate the one changed component before wasting time looking for possibly non-existent problems in working hardware.
I reinstalled my old battery shortly after I created this thread, and my phone worked again. There was a small tear in the flat cable from the connector, so I got a new battery and that one works.
Excellent!
dahawthorne said:
Try re-installing the old battery so that you can identify whether it's a dud new battery or if the phone itself is dead. A real pain, I know, but best to eliminate the one changed component before wasting time looking for possibly non-existent problems in working hardware.
Click to expand...
Click to collapse
Hiya buddy please can you link me to the place where you ordered your new battery from please, iv bin looking and their is hundreds and I don't no which ones are fakes or proper nexus 5. Thanks.
You've quoted me, but I'm guessing your question is directed at sdelange99...?