Database Info

[ROM] [BL] [CSC] [MODEM] Samsung Gear S3 SM-R765A ( R765AUCU1APJ8 )

Hello friends,
Please find the rom files lited below for this device. From now onwards I will include the PIT files in the same thread.
Please note this is for AT & T model.
ROM : AP_R765AUCU1APJ8 Google Drive
BOOTLOADER : BL_R765AUCU1APJ8 Zippyshare
MODEM : CP_R765AUCU1APJ8_CL367188_QB5111100 Zippyshare
PIT : Zippyshare
CSC : CSC_ATT_R765AATT1APJ8 Zippyshare

Is csc is different check mine R765AATT1APJ8 mine also is att

What could happen if I flash this CSC on my S3 Classic?
Since it's a US CSC I believe this could activate SPay on other S3 models

dxzdxz1 said:
What could happen if I flash this CSC on my S3 Classic?
Since it's a US CSC I believe this could activate SPay on other S3 models
Click to expand...
Click to collapse
You will probably brick your watch since this is a firmware for LTE version

10urshin said:
You will probably brick your watch since this is a firmware for LTE version
Click to expand...
Click to collapse
Even flashing only the CSC instead of the entire ROM?

dxzdxz1 said:
Even flashing only the CSC instead of the entire ROM?
Click to expand...
Click to collapse
I have compared CSC versions with people who have Spay on their watches and found we have the same versions. I don't believe it is the CSC that activates*Spay installation. I have tried everything I can think of and nothing works.*I even tried GPS spoofing and that didn't work. It did install Spay into Gear Manager but not onto the watch.

10urshin said:
You will probably brick your watch since this is a firmware for LTE version
Click to expand...
Click to collapse
Sword Fish said:
I have compared CSC versions with people who have Spay on their watches and found we have the same versions. I don't believe it is the CSC that activates*Spay installation. I have tried everything I can think of and nothing works.*I even tried GPS spoofing and that didn't work. It did install Spay into Gear Manager but not onto the watch.
Click to expand...
Click to collapse
Me too man. I did a full dump from my watch and compared to a friend who bought his watch on US (and is able to use SPay here In Brazil) and what I found was that SW_Configuration.xml inside CSC folder was different. Everything else is the same.
I've tried to change the file but the CSC folder is RO.

dxzdxz1 said:
Even flashing only the CSC instead of the entire ROM?
Click to expand...
Click to collapse
I thought you gonna flash the whole rom, idk what would happen if you flash only the csc partition let alone if it even get pass the md5 check on netodin.

Anyone in this firmware got the "Jansky Wearable" update?
Mine did not....

tids2k said:
Hello friends,
Please find the rom files lited below for this device. From now onwards I will include the PIT files in the same thread.
Please note this is for AT & T model.
ROM : AP_R765AUCU1APJ8 Google Drive
BOOTLOADER : BL_R765AUCU1APJ8 Zippyshare
MODEM : CP_R765AUCU1APJ8_CL367188_QB5111100 Zippyshare
PIT : Zippyshare
CSC : CSC_ATT_R765AATT1APJ8 Zippyshare
Click to expand...
Click to collapse
Zippylinks are dead. Does anyone have a copy?

@tids2k
@ others too, who allready downloaded these files
Please re upload files...
Zippyshare Links are expired.
Thanx in advance.
Best Regards

I will upload them again this weekend.

There are tons of reasons to flash a phone or a tablet with a custom rom. Why would I flash my watch?
What does this rom have that the stock rom does not? It seems all that happens is Samsung Pay is disabled.

There are tons of reasons to flash a phone or a tablet with a custom rom. Why would I flash my watch?
What does this rom have that the stock rom does not? It seems all that happens is Samsung Pay is disabled.
Click to expand...
Click to collapse
:cyclops:
1.
This Firmware is outdated + Links are expired...
2.
Are you really sure you know the difference between this Firmware and "Stock"?
Why do you think here is Custom Firmware?
This is Orignal "Service" Firmware for use with ODIN...
3.
Samsung Pay...
If you read other Threads/posts...
Their are enough what disable Spay crap...
4.
NO Custom ROMs for Gear S3 available... as PROTECTED against Modification...
Only as hint for you...
Best Regards

OK that's what I figured. Thanks.

I purchased a used Sm-765A and it is reactivation locked; I'm trying to restore it to factory settings, Can someone tell me where I can find the instructions and files to restore it to factory? Thanks for any help.
P.s. I tried downloading from the zippy links on this thread but files are not there

1.
This Firmware which is NOT fully downloadable is obsolete
Latest know """""""""""""""""""public"""""""""""""""""""""""""... official Version:
Code:
R765AUCU[COLOR="Red"][B]2[/B][/COLOR]BQD4/R765AATT[B][COLOR="Red"]2[/COLOR][/B]BQD4/R765AUCU[B][COLOR="Red"]2[/COLOR][/B]BQD4
Obsolete!
Code:
R765AUCU[B][COLOR="Red"]1[/COLOR][/B]APJ8/R765AATT[COLOR="Red"][B]1[/B][/COLOR]APJ8/R765AUCU[B][COLOR="Red"]1[/COLOR][/B]APJ8
NOT try to flash... you can damage/brick your device! Thanx to Knox and Rollback Prevention...
2.
You have low chance to find Firmware...
3.
Reactivation Lock...
Look at youtube...
Few people offer "Service"... for SM-R760 and SM-R770...
BUT with SM-R765 is seems you will have NO luck...
Also no Combination Firmware for ATT and SM-R765A...
Really, you have no luck with SM-R765... we have more users with no luck:
https://forum.xda-developers.com/gear-s3/help/please-help-bricked-gear-s3-sm-r765s-t3665558
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
Try to contact Seller, if he remember Samsung Account... or give him/her the watch back...
Best Regards

what does flashing with this ROM allow you to do?

Code:
R765AUCU[COLOR="Red"][B]1[/B][/COLOR]APJ8/R765AATT[COLOR="Red"][B]1[/B][/COLOR]APJ8/R765AUCU[COLOR="Red"][B]1[/B][/COLOR]APJ8
R765AUCU[COLOR="Green"][B]2[/B][/COLOR]BQD4/R765AATT[COLOR="Green"][B]2[/B][/COLOR]BQD4/R765AUCU[COLOR="Green"][B]2[/B][/COLOR]BQD4
R765AUCU1APJ8 is old and obsolete AND NOT for Flashing...
Risk to brick...
Rollback Prevention...
Software Revision is 01...
Rollback Prevention Security crap require 02...
Otherwise you have similar result like these:
https://forum.xda-developers.com/gear-s3/help/please-help-bricked-gear-s3-sm-r765s-t3665558
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
Only as info.
Best Regards

Here is the link for the SM-R765A firmware: https://mega.nz/fm/l8sz2ZhY

Problems with my Gear S2

Hi. I recently purchased a second hand Gear S2. I managed to connect it to a Huawei P10, but after turning off the bluetooth by mistake and re-enabling it, the watch asks to do a Factory Reset in order to connect with a device that was already connected with it before . After that, I managed to connect it with my older Glaxy A3 2017 and tried to update the software, but surprise, a pop-up shows saying "Your Gear has been modified. Software Update is not avaible.". Ideas how to fix that? Or this issue is because my Gear S2 (purchased second hand) is a Live Demo Unit?

Live Demo Unit
Click to expand...
Click to collapse
Look at Rear Case/Back Cover...
In theory you will find... NOT FOR SALE...
Anyway... if you know which exact model name...
SM-R720X
or
SM-R732X
or
You can flash Retail Firmware... via netOdin...
Better you choose correct Firmware, according to Model Name...
Only as info.
Best Regards

adfree said:
Look at Rear Case/Back Cover...
In theory you will find... NOT FOR SALE...
Anyway... if you know which exact model name...
SM-R720X
or
SM-R732X
or
You can flash Retail Firmware... via netOdin...
Better you choose correct Firmware, according to Model Name...
Only as info.
Best Regards
Click to expand...
Click to collapse
Yeah, it says Not For Sale. Model number is SM-R720X. Can you please give me a link for firmware download?

Check first Firmware on Device... with this Code:
Code:
*#1234#
Problem with LDU... Live Demo Unit
Since EPK5 it looks like Firmware detect LDU... and disable WiFi for use with netOdin...
And for valid FOTA use... you need "valid" Sales Code/CSC + Firmware Combination... otherwise you can again not update via Samsung FOTA...
Best Regards

adfree said:
Check first Firmware on Device... with this Code:
Code:
*#1234#
Problem with LDU... Live Demo Unit
Since EPK5 it looks like Firmware detect LDU... and disable WiFi for use with netOdin...
And for valid FOTA use... you need "valid" Sales Code/CSC + Firmware Combination... otherwise you can again not update via Samsung FOTA...
Best Regards
Click to expand...
Click to collapse
When entering the code *#1234#, the watch shows AP : R720XXU2AOIL and CSC : R720OXX2AOIL .
Also seem like the computer can find the AP connection from the watch and also it can connect, and netOdin does detect the watch too.

Try FIRST with older BOKK Firmware:
https://www.file-upload.net/download-12731427/smR720_BOKK_OXA.zip.html
Be carefully to download the 600 MB package... NOT any .EXE file.
I hope you will find netOdin + Instruction... otherwise ask...
Best Regards

adfree said:
Try FIRST with older BOKK Firmware:
I hope you will find netOdin + Instruction... otherwise ask...
Best Regards
Click to expand...
Click to collapse
OK, after that, what do I need to do next?

If you successfully flashed BOKK Firmware...
You can check if valid Sales Code/SCS is set... and you have your languages...
Because you have now OXX region Firmware... and I have only OXA BOKK...
If BOKK is on device... check via Phone if you get FOTA Update...
If not... then post result...
So we could try something... to make it "compatible"...
Best Regards

adfree said:
If you successfully flashed BOKK Firmware...
You can check if valid Sales Code/SCS is set... and you have your languages...
Because you have now OXX region Firmware... and I have only OXA BOKK...
If BOKK is on device... check via Phone if you get FOTA Update...
If not... then post result...
So we could try something... to make it "compatible"...
Best Regards
Click to expand...
Click to collapse
I successfully installed BOKK firmware and I have my language, which is in my case romanian, but in the Samsung Gear App, I still get the same error: Your Gear has been modified. Software updates are not available.

I still get the same error: Your Gear has been modified. Software updates are not available.
Click to expand...
Click to collapse
Do you know SDB Tool?
You are able to work with it?
We could try to identify, why Gear Manager App detect some Modification...
Maybe they increased Security to identify SM-R720X...
Best Regards

adfree said:
Do you know SDB Tool?
You are able to work with it?
Click to expand...
Click to collapse
No, I never heard of it so I don't know how it works.

As I can do the Samsung Gear in my rom custom .... to install it but try to run it tells me that the phone has been modified.

Have anyone reached out and found a solution then? 👨🏻‍🦯👨🏻‍

G9650 (Snapdragon) CSC Change/ Stock firmware change (NON ROOT)

Hi everyone,
Recently I flashed a stock ROM on my SM-G9650 and wandered around quite some time before gathering all the information to flash the firmware. Now I’m here gathering most (if not all) the information anyone might need to flash stock firmware to your device. This method does NOT require root and does NOT trip KNOX
First of all:
-Disclaimer-
I will not be responsible if your device gets bricked. PROCEED AT YOUR OWN RISK. This is a guide, and even though its pretty straight forward, stuff happens.
Now, onto flashing the device:
A few prerequisites prior to flashing the device:
- ODIN (latest): https://odindownload.com/
- USB Drivers for Samsung: https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
- An ORIGINAL Cable for your device (Preferably the one that came with it).
- WinRAR or 7zip
- A backup of your data (Optional)
- Patience and time
Ok, now onto the flashing:
First things first: this is a guide for the G9650 (Hong Kong) Variant with UNLOCKED bootloader. If your device model is different, find a thread according to your device.
1- Go to: https://www.sammobile.com/forum/threads/40735-Galaxy-S9-G960-multi-CSC-pit-language , and find the correct Multi CSC for your country/Region. (I live in the Caribbean but chose to use ZTO because it has LTE+ and VoLTE, and the only bloatware is Word, Excel, PowerPoint, LinkedIn and One Drive.). Once you find your CSC, head over to https://www.sammobile.com/firmwares/ and download your desired Firmware. Here is a link for CSC code meaning: https://www.androidsage.com/2017/07...specific-product-code-csc-and-country-region/
2- Once downloaded, create a folder on your desktop and move the zip file to it, then extract. (You can choose any folder you want, I recommend desktop because it is easier to find)
3- Install the USB Drivers previously downloaded.
4- Reboot your pc (By actually opening windows and clicking reboot.)
5- Open Odin and search for the folder you placed the Firmware in.
6- Load BL, AP, CP and CSC (NOT HOME_CSC) onto the correct slots.
Now onto the phone part:
1- Unlock your phone and go to Samsung switch.
2- Back up your data. (If you do not have personal data, then skip)
3- Factory reset the phone, through the settings option.
4- Wait for the phone to boot into the welcome screen.
5- Turn off the device
6- While holding down the Bixby button and the volume up, press the power
7- When the Samsung logo shows, let go of the power and Bixby buttons. Keep holding the Volume up button until you boot into recovery.
8- With the navigation keys, factory reset the phone, once completed, wipe cache and data.
9- Turn off the device.
10- Turn on the device while holding down the Bixby button and volume down. Once the Samsung logo shows, let go of the Bixby button. Keep holding the volume down.
11- Once in the download mode (blue screen with an android), let go of the volume down. Press volume up to select download mode.
Back to the PC part:
1- Once the device is in download mode, connect it via cable and wait for ODIN to recognize it. (a blue box indicating COM port is the indicator that ODIN has recognized the device)
2- Since the BL, AP, CP and CSC have been loaded onto the correct slots, and the device is connected and recognized, go into options and make sure that Auto Reboot and F. Reset time are checked.
3- Press start and BE PATIENT AND CAREFULL, Flashing a firmware takes time. If your cable breaks connection with ODIN, YOU MAY brick your device.
4- Once completed, your phone will boot up on its own, reboot it manually.
Congratulations, you have just flashed a stock, almost bloatware free Samsung Firmware.
If you have any question, feel free to ask.
- To Mods and Admins: Forgive me if I break any rules, this is my first thread. Just let me know what went wrong and I will fix it ASAP
Resources:
https://android.stackexchange.com/questions/176515/what-do-the-terms-bl-ap-cp-and-csc-mean-in-odin
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
https://www.sammobile.com/forum/threads/40735-Galaxy-S9-G960-multi-CSC-pit-language
https://www.sammobile.com/firmwares/
https://www.androidsage.com/2017/07...specific-product-code-csc-and-country-region/
Thanks:
@murtaza02
@Incarniac
@Kimbaroth
@auky
@baderfgt
 @shaggyskunk
- Credit must be given where credit is due.
If I helped you, click that thanks button.

Awesome work, thank you for sharing this info with the rest of the world!!! =D

@lukesky1313
You might want to consider changing the links you have posted for Odin - The latest version is 3.13.1 - The xda link has Odin 3.10.6 and the first Odin link has 3.12.x
Sammobile.com is one of the more reliable sources for Firmware & They conveniently have a link to Odin 3.13.1 as well..
XDA also has a link to the latest version of Odin here:
https://forum-xda--developers-com.c.../odin-available-3-13-1-oreo-fws-t3755957/page
It's strongly recommended to use Odin 3.13.1 to Flash Oreo Firmware ??
Sent from my Galaxy S9+ using XDA Labs

shaggyskunk said:
@lukesky1313
You might want to consider changing the links you have posted for Odin - The latest version is 3.13.1 - The xda link has Odin 3.10.6 and the first Odin link has 3.12.x
Sammobile.com is one of the more reliable sources for Firmware & They conveniently have a link to Odin 3.13.1 as well..
XDA also has a link to the latest version of Odin here:
https://forum-xda--developers-com.c.../odin-available-3-13-1-oreo-fws-t3755957/page
It's strongly recommended to use Odin 3.13.1 to Flash Oreo Firmware ??
Click to expand...
Click to collapse
The link i posted has ODIN 3.13.1, when you open it in the browser (request desktop site on mobile), under the first image is the button for it. I used that link and said (Latest) so that when you head there you get the latest odin. Also, the link for the firmware is sammobile . I now see that its not very intuitive so i will add the link for the firmware (just have to type the device model and download the desired firmware. Thanks for the heads up

Can I use this guide for my S9+ exynos version G965F?

rename_nick said:
Can I use this guide for my S9+ exynos version G965F?
Click to expand...
Click to collapse
You can follow these steps but refer to the G965F thread for your appropiate firmware version

Hi,
I try to flash stock rom follow this guide but CSC of my phone is not changed. it still is TEL instead of XXV.
I flashed Vietnam XXV from: https://www.sammobile.com/firmwares/galaxy-s9-plus/SM-G965F/XXV/download/G965FXXU1BRF8/223940/

rename_nick said:
Hi,
I try to flash stock rom follow this guide but CSC of my phone is not changed. it still is TEL instead of XXV.
I flashed Vietnam XXV from: https://www.sammobile.com/firmwares/galaxy-s9-plus/SM-G965F/XXV/download/G965FXXU1BRF8/223940/
Click to expand...
Click to collapse
Did you use CSC and NOT home CSC?

lukesky1313 said:
Did you use CSC and NOT home CSC?
Click to expand...
Click to collapse
Yes, I used CSC not HOME_CSC

I have been out of the Android game since the S7 Edge. I just swapped from iPhone 8+ to a S9+ and love it so far. Question I have is which firmware can I use to debloat my S9+? It's on T-Mobile and I dl the stock firmware from the posted link but I don't think this is the debloated firmware. Any help would be appreciated as I don't know what all this CSC stuff is.

AUSTIN3:16 said:
I have been out of the Android game since the S7 Edge. I just swapped from iPhone 8+ to a S9+ and love it so far. Question I have is which firmware can I use to debloat my S9+? It's on T-Mobile and I dl the stock firmware from the posted link but I don't think this is the debloated firmware. Any help would be appreciated.
Click to expand...
Click to collapse
What is your device model?

rename_nick said:
Yes, I used CSC not HOME_CSC
Click to expand...
Click to collapse
Your previous CSC was TEL? Is it grouped with the VXX in the multi CSC?

lukesky1313 said:
What is your device model?
Click to expand...
Click to collapse
SM-G965U

AUSTIN3:16 said:
SM-G965U
Click to expand...
Click to collapse
I would highly recommend searching the forums for your variant since it is a Snapdragon and probably has locked bootloader. This guide is for G9650, even though the process is basically the same.

I'm familiar with how to flash with Odin but just don't know what debloated stock ROM is compatible.
---------- Post added at 11:26 PM ---------- Previous post was at 11:24 PM ----------
I don't see a section dedicated to just the T-Mobile version on the S9+.
---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------
I don't see a section dedicated for just the T-Mobile version of the S9+.

AUSTIN3:16 said:
I'm familiar with how to flash with Odin but just don't know what debloated stock ROM is compatible.
Click to expand...
Click to collapse
Make sure the downloaded model matches your device model. For a US variant its pretty hard to find one since most (if not all) put some kind of bloat on them. Search for: Bloat free firmware g965U, and look around.

lukesky1313 said:
Make sure the downloaded model matches your device model. For a US variant its pretty hard to find one since most (if not all) put some kind of bloat on them. Search for: Bloat free firmware g965U, and look around.
Click to expand...
Click to collapse
Ok Thanks!

AUSTIN3:16 said:
Ok Thanks!
Click to expand...
Click to collapse
If you need anything else, you're welcome to come back.
Don't forget to thank!

I bought an unlocked s9+ from ebay and later found out that its country sale came from Panama. My canadian GSM network does work on the device, but certain apps like samsung members show spanish promotions or samsung pay not being available.*
Can the csc code and country be changed in this case so i am able to get the canadian setting and access.
Model: SM-G9650
CPU: Snapdragon 845
Disclaimer: i have never tried alteration of any phone before so im new to this.

JULY Security update for ZTO (G9650) now available

r760xxu2dsa1 new update

Hi
apparently new r760xxu2dsa1 is rolling out
check
https://www.facebook.com/photo.php?...OwV1eUhsGmA8TkeA9kepFrxucWN6-6BlfS36r96859pMq

Tizen 4 for few CSC/Sales Codes like:
Code:
XAR
KOO
PHE
Will try to download...
Best Regards

how can i know the CSC of my watch?
i have SM.R760 XXU2CRH1 and always says i am with latest update

We can detect and also change CSC/Sales Code...
But IMHO all variants I know to check active CSC require Tool SDB
ADB Tool is also possible...
If I have later time... I will try to describe how to...
At the moment I am downloading the 300 MB FOTA Update... :cyclops:
Best Regards

i currently, apparently have OXM
is it possible to install the new update without loosing my data? thanks a lot
adfree said:
We can detect and also change CSC/Sales Code...
But IMHO all variants I know to check active CSC require Tool SDB
ADB Tool is also possible...
If I have later time... I will try to describe how to...
At the moment I am downloading the 300 MB FOTA Update... :cyclops:
Best Regards
Click to expand...
Click to collapse

can anyone help me, i'm still on tizen 2.3.2, everytime i check for update, it says you are on latest firmware, is there anyway to manually update it ? please !!
Gear s3 Frontier SM-R760

Factory Reset and Run Setup, then Update?

mclaudio said:
how can i know the CSC of my watch?
i have SM.R760 XXU2CRH1 and always says i am with latest update
Click to expand...
Click to collapse
go to the "phone app" on your watch and type: *#1234#

Changed my csc to xar and got the update within minutes after reset. Was german code before and besides that i could only choose US english on first boot it was german after first sync.
So everything finde here

Changing CSC
Can anybody help me how van I change csc?

I'm literally looking every day for the update. I bought my S3 in UAE and i live in India. So, apart from not being able to use Samsung pay, i don't get any updates to the latest fw either.

How To Guide Guide to root Galaxy S22 Ultra (B/E/N/0), unlock bootloader and flash official firmware (noob friendly)

Code:
Your warranty is now void.
If you root your device, Your KNOX status will be tripped.
You can still pass the safety net after you root if you follow the instructions.
Sorry for USA models, you can't root unless you can unlock your bootloader
You will lose ALL your data if you unlock your bootloader. Do back up your data.
I am not responsible for bricked devices, or dead SD cards although it is not possible
Please do some research if you have any concerns about doing this to your device
How to flash official firmware? (not the root and unlock bootloader part!)
You will need:
A Galaxy S22 Ultra and common sense
Samsung Odin (the flashing tool of the official firmware)
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
You need to extract the zip file and you are going to use the file Odin3_v3.14.1.exe inside the folder.
Samsung Android USB Driver for Windows
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Double-click and install the exe file.
Optional: If you just want to change CSC, /efi/imei/mps_code.dat is where you can edit after rooting the phone
Replace the CSC you would like to be in the file
If you like to download the firmware of your carrier, follow the instructions bellow
Release 1.0.3 · zacharee/SamloaderKotlin
Contribute to zacharee/SamloaderKotlin development by creating an account on GitHub.
github.com
Download the platform you want to download to. (Windows)
You need to extract the zip and double-click open the file Bifrost.exe inside the folder.
You need to fill in the Model, and Region, press the Check for Updates button and the Download button.
How to find the Model: on your phone → Settings → About Phone → The third row says the Model number and you need to remove the part with the part of /xx, for example, SM-S908B/DS and you only need to type SM-S908B
How to find the Region: You can check the Region at this link https://samfrew.com/model/SM-S908B/
You need to find find a three-letter word depending on your carrier and country and type it in Bifrost, for example, EVR
Press the Check for Update button and download it with the Download button.
Put it to a place you can easily find, ie. Desktop.
After downloading it, find the file SM-xxxxx_x_xxxxxxxx_xxx.zip.enc4 on the place you put it and change the document format from .enc4 to .zip. Then, double-click and extract the file.
Open Odin3_v3.14.1.exe and turn off your phone. Connect a side of your USB to your PC/Laptop, and keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrive at Download Mode press volume up. Go back to Odin3_v3.14.1.exe:
-Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select AP_xxxxxxxxxxx.tar.md5
-Click on CP and select CP_xxxxxxxxxx.tar.md5
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
Optional: add PIT file if you have to repartition.
Press Start to flash the firmware, after that is done, your device will automatically reboot to the system.
How to unlock the bootloader?
Go to your phone → Settings → About Phone → Software information → Press Build number 6 times until you see the notice “You’re now a developer”
Go in Settings → Developer options → enable OEM unlocking
Power off your phone first. Then, connect a side of your USB to your PC/Laptop, press Vol Up + Down and then plug in the USB while keeping Vol Up+Down pressed.
When you arrive at Download Mode, long press volume up until you see the black screen. Confirm to unlock the bootloader and you will erase your device.
How to root your phone?
After you unlock your bootloader, you set up your phone and ensure you do not sign in to your Google account first. Install Magisk https://github.com/topjohnwu/Magisk/releases/download/v24.1/Magisk-v24.1.apk on your phone. You need to allow the app to install other apps so that you can install the apk.
Transfer AP_xxxxxxxxxx.tar.md5 in the firmware you download from your PC/Laptop to your phone.
Open Magisk on your phone and press the install button in the Magisk column. Select 'Select and Patch a File', 'Let's Go and find the AP_xxxxxxxxxx.tar.md5 and select it. You can have a cup of coffee if you like when you waiting for the patching of the file.
After finishing the patching, transfer the file magisk_patched-24xxx_xxxxx.tar in the Downloads folder back to your PC/Laptop.
Turn off your phone. Connect a side of your USB to your PC/Laptop, and keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrive at Download Mode press volume up. Open Odin3_v3.14.1.exe on your PC/Laptop:
Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select magisk_patched-24xxx_xxxxx.tar
-Click on CP and select CP_xxxxxxxxxx.tar.md5
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
Optional again: add PIT file if you have to repartition
When it finishes flashing, it will automatically reboot and you can gain root access.
Optional: If you want to have the safety net passed (most of the banking apps use it), then you need to install the zip
as a Magisk module in Magisk https://github.com/kdrag0n/safetynet-fix/releases
How? Go to Magisk → Modules → install from storage and select the zip you downloaded.
How to update the system without losing roots and data?
Download the new firmware of the phone and update the Magisk App if it is not up to date. Unzip the firmware you download and transfer the AP file to your phone. Patch your AP file and transfer it back to your PC (in /sdcard/Download)
Power off the phone and reboot to Download mode
Open Odin and put the new magisk_patched file in the AP slot, the BL and CP from your new firmware into their respective slots and importantly *HOME_CSC* into the CSC slot.
Press start and let Odin do its stuff.
When flashed, do not wipe.
Press and hold Vol-down and Power
As soon as the screen appears, let go of all buttons.
Within moments without any further user intervention your phone will reboot into your updated Magisk rooted mode, data intact.
Credits to:
Magisk and all the develpers
jult for informing me about the errors

Thanks, still waiting for s22u and firmware(BRI/sm-s9080).
Edit: The firmware has come up.

donkeyman1234 said:
Thanks, still waiting for s22u and firmware.
Click to expand...
Click to collapse
The time of downloading the firmware is quite long, please be patient

It gives me an error when I try to check for updates. It's the EUX version.

acbdo6 said:
It gives me an error when I try to chek for updates. It's the EUX version.
Click to expand...
Click to collapse
I am looking into the problem, please wait

acbdo6 said:
It gives me an error when I try to check for updates. It's the EUX version.
Click to expand...
Click to collapse
I think you may need to download the file at this link, although it will be slower. Usually, the app always works. Sorry
Download Samsung Galaxy S22 Ultra SM-S908B EUX Europe S908BXXU1AVA7 firmware
Fast download latest Samsung Galaxy S22 Ultra firmware SM-S908B from Europe with S908BXXU1AVA7 and Android version 12
www.sammobile.com

This will work on the Verizon version?

lucky_strike33 said:
This will work on the Verizon version?
Click to expand...
Click to collapse
I have a look at the internet and I think maybe you will need some service like that https://forum.xda-developers.com/t/sampwnd-usa-model-bl-unlock-info-u-u1-w.4201689/ if you cannot unlock the bootloader by following the guide

My s22ultra is SM-S908B EUX and I want to flash the Indonesian XID firmware which is OLE and SM-S908E. Is this possible?

gpap2004 said:
My s22ultra is SM-S908B EUX and I want to flash the Indonesian XID firmware which is OLE and SM-S908E. Is this possible?
Click to expand...
Click to collapse
you need to use the firmware of the same model number but you can use the firmware from different country

Williamtung said:
you need to use the firmware of the same model number but you can use the firmware from different country
Click to expand...
Click to collapse
Looks like Samsung changed some things there. XID firmware was available for flashing to my ex - S21 ultra . Now , in S22 ultra, I see different types of regions (SM-S908E and SM-S908B).

gpap2004 said:
Looks like Samsung changed some things there. XID firmware was available for flashing to my ex - S21 ultra . Now , in S22 ultra, I see different types of regions (SM-S908E and SM-S908B).
Click to expand...
Click to collapse
emmm... i'm not really sure about it now. maybe you can have a try then
[edit]: I have a look at the internet and I think it is all right if you use firmware of a different model. Of course, the spec should be similar/the same

Williamtung said:
emmm... i'm not really sure about it now. maybe you can have a try then
Click to expand...
Click to collapse
Yeah, but I'm afraid. I would not like to brick the phone. Except the all procedure stops from Odin and avoid bricking.

gpap2004 said:
Yeah, but I'm afraid. I would not like to brick the phone. Except the all procedure stops from Odin and avoid bricking.
Click to expand...
Click to collapse
you won't likely brick your device because I have taken a look and both devices are identical. So, I think it is fine to flash

Williamtung said:
you won't likely brick your device because I have taken a look and both devices are identical. So, I think it is fine to flash
Click to expand...
Click to collapse
This is great! Thanks ! Because XID ( Indonesian) firmware supports fully native call recording. Samsung's OTA updates are also available every month.

gpap2004 said:
This is great! Thanks !
Click to expand...
Click to collapse
you are welcome

I just made a research to the internet and I found that SM-S908E is probably different variant from SM-S908B .
SM-S908E is a snapdragon edition while SM-S908B is Exynos.
So , I think I cannot flash XID firmware for snapdragon edition to an Exynos version
I'm sad now

gpap2004 said:
I just made a research to the internet and I found that SM-S908E is probably different variant from SM-S908B .
SM-S908E is a snapdragon edition while SM-S908B is Exynos.
So , I think I cannot flash XID firmware for snapdragon edition to an Exynos version
I'm sad now
Click to expand...
Click to collapse
Oh, sorry. I haven't noticed about the SoC. The SoC in Europe is Snapdragon. So I don't think you should change it.
If you just want to change CSC, /efi/imei/mps_code.dat is where you can edit. Both firmware is the same except the CSC, no difference between them

My preordered s22u will come with snapdragon (sm-s9080 BRI ), I will use CHC csc, also like to have call recording.

gpap2004 said:
Looks like Samsung changed some things there. XID firmware was available for flashing to my ex - S21 ultra . Now , in S22 ultra, I see different types of regions (SM-S908E and SM-S908B).
Click to expand...
Click to collapse
S908E = snapdragon
S908B = exynos
Some countries have both version listed, you needs to to download one according your device
You can check about phone model number to see which one you own