Database Info

Mate 9 Unlock/Relock/Lock question

Hello, i have a big doubt about unlock my Mate 9.
I have read some guides but i'am confused, i will not lose the warranty and i see that with software dc-unlocker is possible relock the bootloader at original status, it is right? there are other softwares that do same job?
Sorry for my bad english.
thanks for help

Khris00 said:
Hello, i have a big doubt about unlock my Mate 9.
I have read some guides but i'am confused, i will not lose the warranty and i see that with software dc-unlocker is possible relock the bootloader at original status, it is right? there are other softwares that do same job?
Sorry for my bad english.
thanks for help
Click to expand...
Click to collapse
There's a difference between lock and relock.
Relock will say 're-locked' in the bootloader, and that's probably voiding warranty.
You can get it to say 'locked' by flashing official firmware, you have a few options here...
1. Firmware Finder
2. Flash update guide
3. Dload method (only for C636B136 and AL00C00B115)
4. FunkyHuawei (paid)
5. Dc unlocked (i think anyway, and paid)

ante0 said:
There's a difference between lock and relock.
Relock will say 're-locked' in the bootloader, and that's probably voiding warranty.
You can get it to say 'locked' by flashing official firmware, you have a few options here...
1. Firmware Finder
2. Flash update guide
3. Dload method (only for C636B136 and AL00C00B115)
4. FunkyHuawei (paid)
5. Dc unlocked (i think anyway, and paid)
Click to expand...
Click to collapse
thanks for answer
So is possible change the status just flashing the stock firmware? is so simple?
i need to do then unlock bootloader>>install modded recovery>>flash modded rom. For return to the stock firmware and bootloader locked what i need to do? i flash the stock firmaware but the twrp remain?
thanks

Khris00 said:
thanks for answer
So is possible change the status just flashing the stock firmware? is so simple?
i need to do then unlock bootloader>>install modded recovery>>flash modded rom. For return to the stock firmware and bootloader locked what i need to do? i flash the stock firmaware but the twrp remain?
thanks
Click to expand...
Click to collapse
No. When you flash stock firmware everything is back to stock. If there was a way to flash a modified update.zip with Twrp as recovery instead of stock recovery it would be possible. But as far as I know we can't yet. I've tried to repack using Huawei Update extractor but it doesn't want to, header mismatch. (this is on all extracted files, not just twrp)
The only reason to get locked bootloader would be if you needed to return the phone because of a software error. If it's hardware it should be replaced anyway.

ante0 said:
There's a difference between lock and relock.
Relock will say 're-locked' in the bootloader, and that's probably voiding warranty.
You can get it to say 'locked' by flashing official firmware, you have a few options here...
1. Firmware Finder
2. Flash update guide
3. Dload method (only for C636B136 and AL00C00B115)
4. FunkyHuawei (paid)
5. Dc unlocked (i think anyway, and paid)
Click to expand...
Click to collapse
ante0 said:
No. When you flash stock firmware everything is back to stock. If there was a way to flash a modified update.zip with Twrp as recovery instead of stock recovery it would be possible. But as far as I know we can't yet. I've tried to repack using Huawei Update extractor but it doesn't want to, header mismatch. (this is on all extracted files, not just twrp)
The only reason to get locked bootloader would be if you needed to return the phone because of a software error. If it's hardware it should be replaced anyway.
Click to expand...
Click to collapse
thanks for help Ante and sorry for my newbie questions, i will just flash one mod rom instead a stock i have now(B182) because i don't like emui, but if is possible when i'll go to sell i can back to stock condition and warranty Ok, i can do that?
thanks

Khris00 said:
thanks for help Ante and sorry for my newbie questions, i will just flash one mod rom instead a stock i have now(B182) because i don't like emui, but if is possible when i'll go to sell i can back to stock condition and warranty Ok, i can do that?
thanks
Click to expand...
Click to collapse
Yep. Flashing stock firmware will do that.
You won't get rid of emui though. We don't have AOSP so emui is always there...

ante0 said:
Yep. Flashing stock firmware will do that.
You won't get rid of emui though. We don't have AOSP so emui is always there...
Click to expand...
Click to collapse
you mean all modded roms are emui based?

Khris00 said:
you mean all modded roms are emui based?
Click to expand...
Click to collapse
Yes.
And there are only 2. RomAur and Ephemeral

ante0 said:
Yep. Flashing stock firmware will do that.
You won't get rid of emui though. We don't have AOSP so emui is always there...
Click to expand...
Click to collapse
ante0 said:
Yes.
And there are only 2. RomAur and Ephemeral
Click to expand...
Click to collapse
thanks again

ante0 said:
There's a difference between lock and relock.
Relock will say 're-locked' in the bootloader, and that's probably voiding warranty.
You can get it to say 'locked' by flashing official firmware, you have a few options here...
1. Firmware Finder
2. Flash update guide
3. Dload method (only for C636B136 and AL00C00B115)
4. FunkyHuawei (paid)
5. Dc unlocked (i think anyway, and paid)
Click to expand...
Click to collapse
sorry for my bad thing. But can i ask you help me this case:
i have Mate 9 Pro LON-L29C636C361 (lastest Oreo ) , but my bootloader is unlocked, and maybe not have stock recovery .
So, which method can flash again full rom C361 (3 file : update.zip, data full, hw...etc) and complete back to stock with locked bootloader???
I read somewhere about method LON-HWOTA, but it fail when flash TWRP step, because i am on Oero, so this method can not use in this my case . Can you show me another way ?

to relock bootloader on Android 8 (MUI8), only works if you have your CORRECT oeminfo.bin. make sure you backup yours before rebranding
1. just flash TWRP
2. make folder folder HWOTA8 on SD card
3. Download HWOTA8 and copy "hwota8_rebrand" to SDcard
4. Copy your oeminfo.bin file to HWOTA8 folder.. Make sure to rename your file to oeminfo.bin
5. Boot into TWRP and install from SDcard hwota8_rebrand
Done bootloader relocked

can I get the stock OS back?

I accidentally wiped my Honor 8 with TWRP. Is it possible to get my Honor 8 back to the default OS?

Raxcu said:
I accidentally wiped my Honor 8 with TWRP. Is it possible to get my Honor 8 back to the default OS?
Click to expand...
Click to collapse
Is the bootloader unlocked? Do you know which model you had? Do you know which version of EMUI you had? Also for future reference do not make new threads without looking in guides because I think the answer is right here. https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445 . Next time you post try to be more helpful because everyone here will try to help you if you help them help you. Some people may not respond if you do not leave information, or communicate that you need help to provide the information.
If you know you had EMUI 5, this should work (assuming you use the correct firmware files and have unlocked bootloader still). What did you wipe in TWRP?

FeeningRootPriv said:
Is the bootloader unlocked? Do you know which model you had? Do you know which version of EMUI you had? Also for future reference do not make new threads without looking in guides because I think the answer is right here. https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445 . Next time you post try to be more helpful because everyone here will try to help you if you help them help you. Some people may not respond if you do not leave information, or communicate that you need help to provide the information.
If you know you had EMUI 5, this should work (assuming you use the correct firmware files and have unlocked bootloader still). What did you wipe in TWRP?
Click to expand...
Click to collapse
yes, the bootloader is unlocked, I had the FRD-L09 model, I had the EMUI 5.0. I wiped everything accidentally with advanced wipe.

Raxcu said:
yes, the bootloader is unlocked, I had the FRD-L09 model, I had the EMUI 5.0. I wiped everything accidentally with advanced wipe.
Click to expand...
Click to collapse
Next time be more careful. Here are some steps for you
1. Flash TWRP 3.1.1-1 (fastboot flash recovery twrp.img)
2. Download Firmware (If you are in Europe The L09 firmware up top should be what you use. If you are in Asia use the L09 firmware at the bottom.)
3. Move the firmware to your External SD if present and name the folder "Stock Firmware" using TWRP MTP
4. Factory Reset in TWRP (NOT ADVANCED WIPE)
5. Flash your region file before update.zip
6. Reboot to recovery in twrp, this will run EMUI stock recovery
7. Tap factory reset, wait.
You may need to Unlock the bootloader again, but your phone should be okay.

Raxcu said:
yes, the bootloader is unlocked, I had the FRD-L09 model, I had the EMUI 5.0. I wiped everything accidentally with advanced wipe.
Click to expand...
Click to collapse
Based on the method given above, were you able to restore the device? It would be new learning for me as i would go for dload but he suggested which was something new for me and i would definitely follow this instructions if i mess up or dload doesn't work.

Need help fixing an Honor 8. Stuck on EMUI 4.0 after failing with custom ROMs

Hello! So I tried flashing a custom ROM to my friends Honor 8 after reading around a bit and such but it ultimately failed and now we're trying to get it back to the default ROM. We found a ROM download but it was for the version FRD-l09C900B120 which was running EMUI4.0 and Android 6.0. I also read that the "C" version he has doesn't receive any further updates, I'm failing to find anything on the correct "C" version anywhere. If anyone could guide me through the installation process for the correct and latest firmware it would be great!
On another note, the build in eRecovery doesn't seem to want to install the update package. It always fails pretty early on after connecting to WiFi, any fix for that would be great. Thanks!
Thanks for any help!

On which ROM was the custom ROM based? You should try to flash the rollback package with dload method and then flash B120 or another EMUI 4.X ROM with same method

Rayan19997 said:
On which ROM was the custom ROM based? You should try to flash the rollback package with dload method and then flash B120 or another EMUI 4.X ROM with same method
Click to expand...
Click to collapse
The custom ROM was Linageos 14.1, so it wasn't anything EMUI based.
I'm gonna try and manually flash the ROM from an update.app that we downloaded from the app Firmware Finder.

ZelafAry said:
Hello! So I tried flashing a custom ROM to my friends Honor 8 after reading around a bit and such but it ultimately failed and now we're trying to get it back to the default ROM. We found a ROM download but it was for the version FRD-l09C900B120 which was running EMUI4.0 and Android 6.0. I also read that the "C" version he has doesn't receive any further updates, I'm failing to find anything on the correct "C" version anywhere. If anyone could guide me through the installation process for the correct and latest firmware it would be great!
On another note, the build in eRecovery doesn't seem to want to install the update package. It always fails pretty early on after connecting to WiFi, any fix for that would be great. Thanks!
Thanks for any help!
Click to expand...
Click to collapse
You did not make any twrp backup??
You are on twrp recovery right now??
Which firmware number you were on before going to custom??

hassanjavaid8181 said:
You did not make any twrp backup??
You are on twrp recovery right now??
Which firmware number you were on before going to custom??
Click to expand...
Click to collapse
We did not make a twrp backup (In hindsight we should've....)
We don't have twrp on it right not but can be fixed if needed.
We were on the latest update available to the phone which should be latest today as well. (OTA)

Flashing it manually made the phone enter a bootloop. It didn't even start the firmware. Any suggestions?
EDIT: We got into Fastboot. What are our options?

Right now your best option in my opinion is to flash Boot.img, recovery.img,cust.img and system.img that you will extract from the UPDATE.APP of your CURRENT Rom. Then just try the dload method again and again, it may not accept the firmware you try to flash but in this case just try another, but not a lower one because you need the rollback package to do that

Rayan19997 said:
Right now your best option is to pray for USB debugging to be enabled and then unlock the bootloader if you didn't do it earlier. After that you should try to flash TWRP
Click to expand...
Click to collapse
What should we do after we've flashed TWRP? When I tried flashing LineageOS 14 it decided to fail the installation somehow and be at an endless boot animation. So I'd like to get the phone restored to EMUI5.0.

Sorry, what I said was garbage, I just edited my comment, you're so quick lol

Rayan19997 said:
Sorry, what I said was garbage, I just edited my comment, you're so quick lol
Click to expand...
Click to collapse
Well currently there's a broken firmware on it of FRD-L09C432B943... Or something like that.
I think at this point he's looking at getting a new phone all together.

No matter if the firmware inside isn't working properly, with fastboot you can manually flash each partition that is needed as long as USB debugging is enabled and bootloader unlocked. After flashing these cleans parts you can properly use the dload method , and if you get an error using dload method can you tell me which one is it? At least the device behavior.
I have to sleep, I'll be right back on the morning hope you'll make it this night , if don't , please be more specific and accurate when you describe the errors you faced, that way we will be more efficient when answering
Sorry for language mistakes, English isn't my native language :silly:

Rayan19997 said:
No matter if the firmware inside isn't working properly, with fastboot you can manually flash each partition that is needed as long as USB debugging is enabled and bootloader unlocked. After flashing these cleans parts you can properly use the dload method , and if you get an error using dload method can you tell me which one is it? At least the device behavior.
I have to sleep, I'll be right back on the morning hope you'll make it this night , if don't , please be more specific and accurate when you describe the errors you faced, that way we will be more efficient when answering
Sorry for language mistakes, English isn't my native language :silly:
Click to expand...
Click to collapse
Currently there's no working OS on it so I'm gonna see if I can find a firmware that I can flash. Do you have any idea where I can get one?

Yeah on honor official site: Hihonor
Or with firmware finder

ZelafAry said:
Currently there's no working OS on it so I'm gonna see if I can find a firmware that I can flash. Do you have any idea where I can get one?
Click to expand...
Click to collapse
If you need a full firmware then you should visit official honor site..

If you flash LineageOS on a phone without OS it won't work just because LineageOS patch the current installed System, if there is no system there is no way it will boot

hassanjavaid8181 said:
If you need a full firmware then you should visit official honor site..
Click to expand...
Click to collapse
I can't find any Honor 8 FRD-L09 downloads anywhere on the Huawei sites or Honor sites. They must've removed the downloads just like they did with the Honor 7..
Rayan19997 said:
If you flash LineageOS on a phone without OS it won't work just because LineageOS patch the current installed System, if there is no system there is no way it will boot
Click to expand...
Click to collapse
I get that now and I know how to proceed in the future.
On another note, I got a good UPDATE.APP available but it refuses to install using the dload method because the versions are different. Does anyone know which partition the USERDATA.img file goes to?

You don't have to flash each single partition but dude in my opinion it's better to flash the whole UPDATE.APP, just use the rollback package and flash a lower EMUI.
Another thing: I'm currently on honor official site and I can download firmwares, you're searching in the wrong place.
www.hihonor.com/fr/support/search-result/index.html?keywords=honor 8

Rayan19997 said:
You don't have to flash each single partition but dude in my opinion it's better to flash the whole UPDATE.APP, just use the rollback package and flash a lower EMUI.
Another thing: I'm currently on honor official site and I can download firmwares, you're searching in the wrong place.
www.hihonor.com/fr/support/search-result/index.html?keywords=honor 8
Click to expand...
Click to collapse
Thank you for that link, I downloaded it and flashed it, I couldn't find it on any other hihonor site but this French one had it.
Again, thank you, it worked flawlessly installing and it updated instantly. You saved me from a lot of worrying and anxiety about breaking my friends phone lol.

I'm really glad to read that dude

thanks for the firmware been looking for it for very long!
btw you just saved another honor 8

Boot animation problem

Hi
since i flash my update rom android 7.0
i have two Boot Animation
first is for honor
second is huawei
how remove second one?
plz help me

Try to clean flash your firmware through dload method, trying to be accurate while flashing. Something surely went bad while flashing the update you're talking about. Maybe you flashed the 7.0 for another variant, and now it messed up the firmware. Go on hwmt.ru site -> firmware database, and recover your ROM update package.
You have to pay attention and flash ONLY packages that matches your build number first 9 characters. Like "BLN-L21C432Bxxx", for example, will work only on a BLN-L21C432Bxxx. Flash only packages with PV at the end of the name.

RedSkull23 said:
Try to clean flash your firmware through dload method, trying to be accurate while flashing. Something surely went bad while flashing the update you're talking about. Maybe you flashed the 7.0 for another variant, and now it messed up the firmware. Go on hwmt.ru site -> firmware database, and recover your ROM update package.
You have to pay attention and flash ONLY packages that matches your build number first 9 characters. Like "BLN-L21C432Bxxx", for example, will work only on a BLN-L21C432Bxxx. Flash only packages with PV at the end of the name.
Click to expand...
Click to collapse
tanks but is there any way to fix it without flashing rom
because i already opened my bootloader and installed twrp
now i cant relock it
because when i relock it rom dosent load
& i have to relock it again & restore from twrp
(does d load metod need locked bootloader?or i can do it with twrp)

hamijan said:
tanks but is there any way to fix it without flashing rom
because i already opened my bootloader and installed twrp
now i cant relock it
because when i relock it rom dosent load
& i have to relock it again & restore from twrp
(does d load metod need locked bootloader?or i can do it with twrp)
Click to expand...
Click to collapse
my bootloader unlocked and load metod worked for me

aixabdennour said:
my bootloader unlocked and load metod worked for me
Click to expand...
Click to collapse
Tanks dude
The problem was twrp
I flashed stock recovery & problem solved!!?

hamijan said:
Tanks dude
The problem was twrp
I flashed stock recovery & problem solved!!
Click to expand...
Click to collapse
now i flashed stock rom with dload method
and i cant flash twrp recovery
i flash it and it says finished
bit when i hold volume up & power stock recovery start!
what should i do?
is there other way to root than twrp?
(bln-l21c185b361)

hamijan said:
now i flashed stock rom with dload method
and i cant flash twrp recovery
i flash it and it says finished
bit when i hold volume up & power stock recovery start!
what should i do?
is there other way to root than twrp?
(bln-l21c185b361)
Click to expand...
Click to collapse
Refer rooting guide for 6X and emui 5 in my signature. Dont use other files

shashank1320 said:
Refer rooting guide for 6X and emui 5 in my signature. Dont use other files
Click to expand...
Click to collapse
Tanks man??
Problem solved

hamijan said:
Tanks man??
Problem solved
Click to expand...
Click to collapse
Glad to know. Enjoy rooted phone :silly:

[help] Bootloop after Oreo flash

hello guys, today stupidly I wanted to install oreo on my honor 8 European (starting from the firmware l09-c432b403) through the Redlotus method (great guide helped me to do a clean flash of the system) now I'm with a brick with bootloader automatically locked after the installation of oreo and I do not know how to reshuffle it since it does not light up ... can you make a miracle? :crying: :crying:

Markxdx said:
hello guys, today stupidly I wanted to install oreo on my honor 8 European (starting from the firmware l09-c432b403) through the Redlotus method (great guide helped me to do a clean flash of the system) now I'm with a brick with bootloader automatically locked after the installation of oreo and I do not know how to reshuffle it since it does not light up ... can you make a miracle? :crying: :crying:
Click to expand...
Click to collapse
Can you boot into recovery? If yes then a factory reset should solve the problem in such cases

In recovery factory wipe get error at 10% ...

Markxdx said:
In recovery factory wipe get error at 10% ...
Click to expand...
Click to collapse
Try using fastboot to wipe data

boris dmello said:
Try using fastboot to wipe data
Click to expand...
Click to collapse
I tried also through fastboot but tells me that it is not allowed to do the wipe, it will be because the bootloader is blocked.ora I do not think it is a hard brick because it goes into recovery ... now the only methods are or try to unlock the bootloader (but I can not find the product id because it does not turn on) or to find some firmware that does not make me fail the update via dload ... but they all fail ...

Markxdx said:
I tried also through fastboot but tells me that it is not allowed to do the wipe, it will be because the bootloader is blocked.ora I do not think it is a hard brick because it goes into recovery ... now the only methods are or try to unlock the bootloader (but I can not find the product id because it does not turn on) or to find some firmware that does not make me fail the update via dload ... but they all fail ...
Click to expand...
Click to collapse
Did you try the rollback firmware in dload?
You can try getting the unlock code using the IMEI and serial number on the box, unfortunately no product ID is on the box try some product id generator or using dc unlocker... It's the only known way to get the unlock code in such situation.

boris dmello said:
Did you try the rollback firmware in dload?
You can try getting the unlock code using the IMEI and serial number on the box, unfortunately no product ID is on the box try some product id generator or using dc unlocker... It's the only known way to get the unlock code in such situation.
Click to expand...
Click to collapse
what would be the firmware rollback? if you mean android 6.0 I tried to install it but it fails. yesterday I also sent the request of the bootloader code obtaining the product id through the generator. now I do not know if they will send us to send it to me, if they send it to me ... thanks anyway for your help

Markxdx said:
what would be the firmware rollback? if you mean android 6.0 I tried to install it but it fails. yesterday I also sent the request of the bootloader code obtaining the product id through the generator. now I do not know if they will send us to send it to me, if they send it to me ... thanks anyway for your help
Click to expand...
Click to collapse
No I meant the android 7.0 rollback version available in firmware finder

This one....

boris dmello said:
This one....
Click to expand...
Click to collapse
Now I try... :fingers-crossed:

boris dmello said:
No I meant the android 7.0 rollback version available in firmware finder
Click to expand...
Click to collapse
hey!
I downloaded the rollback version, extracted the update.APP placed in the Dload folder but when I restart in recovery it stops the installation at 5% ..

Markxdx said:
hey!
I downloaded the rollback version, extracted the update.APP placed in the Dload folder but when I restart in recovery it stops the installation at 5% ..
Click to expand...
Click to collapse
You should wait for the unlock code then, no other option try factory reset one last time maybe, good luck

boris dmello said:
You should wait for the unlock code then, no other option try factory reset one last time maybe, good luck
Click to expand...
Click to collapse
feel, as far as the unlock code is concerned, since I have made the request Saturday, Saturday and Sunday do not count? the code sends it automatically or there will be someone who reads the e-mails ... just out of curiosity

Markxdx said:
feel, as far as the unlock code is concerned, since I have made the request Saturday, Saturday and Sunday do not count? the code sends it automatically or there will be someone who reads the e-mails ... just out of curiosity
Click to expand...
Click to collapse
I think it's a manual process as its submitted in Google forms, even I have requested a unlock code on Saturday, I can't remember where I stored the original one or weather if I ever saved it at all. But luckily my device update was successful... B404 only had to factory reset and the bootloader was locked.
Will let you know as soon as I receive it, and you let me know too when you receive it :fingers-crossed:

boris dmello said:
I think it's a manual process as its submitted in Google forms, even I have requested a unlock code on Saturday, I can't remember where I stored the original one or weather if I ever saved it at all. But luckily my device update was successful... B404 only had to factory reset and the bootloader was locked.
Will let you know as soon as I receive it, and you let me know too when you receive it :fingers-crossed:
Click to expand...
Click to collapse
yep :good:

Markxdx said:
yep :good:
Click to expand...
Click to collapse
Have you got the code?

boris dmello said:
Have you got the code?
Click to expand...
Click to collapse
yet no .. have you received it?

Markxdx said:
yet no .. have you received it?
Click to expand...
Click to collapse
No not yet

Markxdx said:
hello guys, today stupidly I wanted to install oreo on my honor 8 European (starting from the firmware l09-c432b403) through the Redlotus method (great guide helped me to do a clean flash of the system) now I'm with a brick with bootloader automatically locked after the installation of oreo and I do not know how to reshuffle it since it does not light up ... can you make a miracle? :crying: :crying:
Click to expand...
Click to collapse
You should always backup your bootloader unlock key instead of requesting it everytime. Anyways, once you do get your unlock key, unlock the bootloader and do the following steps to restore your device:
Grab Honor View 10 TWRP from here: https://dl.twrp.me/berkeley/ and flash it using the command below:
Code:
fastboot flash recovery_ramdisk twrp.img
Replace twrp.img with the name of the recovery.
You now need EMUI 5 firmware. Go to firmware finder and download the firmware which is FullOTA-MF-PV (must have PV in the end). Copy the firmware to your SD-card. For you it should be B394: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1774/g1755/v101649/f1/full/update.zip
Now reboot your device to TWRP. It might take some time to boot to TWRP so do wait.
Once rebooted, install the update.zip file.
Reboot to system from TWRP. Your device will automatically perform a second stage install and a complete data reset.
Hooray, you're back to EMUI 5.
Now again unlock bootloader and flash EMUI 5 TWRP. Now install this zip: http://update.hicloud.com:8180/TDS/...-L09_hw_eu/update_data_full_FRD-L09_hw_eu.zip
Perform a final factory reset via erecovery and you're done.

hackslash said:
You should always backup your bootloader unlock key instead of requesting it everytime. Anyways, once you do get your unlock key, unlock the bootloader and do the following steps to restore your device:
Grab Honor View 10 TWRP from here: https://dl.twrp.me/berkeley/ and flash it using the command below:
Code:
fastboot flash recovery_ramdisk twrp.img
Replace twrp.img with the name of the recovery.
You now need EMUI 5 firmware. Go to firmware finder and download the firmware which is FullOTA-MF-PV (must have PV in the end). Copy the firmware to your SD-card. For you it should be B394: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1774/g1755/v101649/f1/full/update.zip
Now reboot your device to TWRP. It might take some time to boot to TWRP so do wait.
Once rebooted, install the update.zip file.
Reboot to system from TWRP. Your device will automatically perform a second stage install and a complete data reset.
Hooray, you're back to EMUI 5.
Now again unlock bootloader and flash EMUI 5 TWRP. Now install this zip: http://update.hicloud.com:8180/TDS/...-L09_hw_eu/update_data_full_FRD-L09_hw_eu.zip
Perform a final factory reset via erecovery and you're done.
Click to expand...
Click to collapse
hello and thanks for your help, a question, before installing the update.zip I have to do the wipe data restart in recovery and do another wipe as in custom rom?