Related
I have a strange problem with a HTC Touch PRO. Here is my problem:
- I insert the USB cable and the phone asks if I want to use mass storage or activesync
-the phone shows a connection on the screen
-The PC is not sensing anything, the activesync is not connected.
I think this problem appeared after I used a wrong usb cable...
Anyone knows anything what to try? or this is a hardware problem?
Did you select ACTIVESYNC?
There are 2 modes this phone can do..
1) Standard ActiveSYNC or
2) AS a MASS STORAGE DEVICE -like a flash drive...
You have to select ActiveSYNC to actually SYNC software/calendar, else it will show up as just another drive to drag/drop files..
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
laseru said:
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
Click to expand...
Click to collapse
The problem is likely with your operating system on your pc.
You can try things like, un-installing the HTC usb driver in device manager.
Check your firewall.
- allow activesync for trusted
- I know for ZoneAlarm you have to go to the adapters section and set the ipaddress (a new one is created when your phone is hooked up via USB) to be trusted.
If that doesn't fix issue perhaps its a corrupt install of ActiveSync. Try uninstalling and reinstalling.
laseru said:
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
Click to expand...
Click to collapse
I've had this happen to me. I've got so many USB to mini-USB cables and they are not all alike.
Sometimes, it would work and sometimes activesync would not recognize it.
CHANGE YOUR CABLE to another. Hopefully, you've labeled the original cable that came with the phone..
(also, look at the mini cable where it plugs into your phone. Make sure there are no loose pins and/or verify that the 'plug' is level.
Try a different USB port
Try unchecking "use advanced network configuration" in Async settings on the phone. Some computers (for various reasons) have a hard time communicating with the phone when it's configured as a network device - unchecking this will often allow Async to find and connect to the phone, at the expense of some other functionality.
coincendentally i am having the same exact issue, it started last night.
i have tried 3 different cords, on all 3 usb ports on my computer. same thing the phone asks what kind of connection i want whether i select disk drive ofr active sync noting happens. whats weird is that the phone is charging when its connected however the computer is not seeing it at all.
i have tried all the recommendations in this thread but nothing is working. anymore help would be greatly apprciated!
Me too I have tryed everything but none is working.
I think that this a hardware problem, and the problem started to happen after i used a non HTC cable, bad quality. I think some kind of controller is dead. So i started to live with that
When I connteced to the PC via USB, my TP also asked me how to connect (AS or as disc). But suddenly it doesn't ask anymore. I had to deactivate "advanced network configuration" to conntect to AS.
The checkbox "ask each time USB connects" is activated.
What can I do that the phone asks again when I connect it?
Thx.
I have the same thing going on... suddenly a few days ago my fuze only charges when I plug it in the desktop with a usb cable... I re-flashed and it worked about halfway through a sync and then started again... I've tried different cables... uninstalled all of the usb drivers, and reinstalled then updated them... Disconnected the power supply... tried every setting on my phone, and in windows.... I've even uninstalled the last batch of windows updates that came out last week... nothing seems to work...
really simple solution.
decheck advanced network config. plug in cable wait till you see usb connected. a small box. after that choose for example activesync
internet share
This happened to me last night and I figured out that after you toggle your internet sharing you can sync up again. Idk why it works out like that but it worked for me.
This sound reasonable, because the last thing I did before was selecting the "internet sharing" option in the menu when you connect to USB.
But what do you mean with "toggle your internet sharing"? Can you please describe it.
Thx.
try this
okay - first see if you're getting an active connection with your pc , not from the network connections window, but by running mymobiler. I was getting a connection through mymobiler, but active sync wasn't recognizing the device. If mymobiler works, Call your phone. it will drop your connection with mymobiler when you answer the call. then hang up the phone call. (all the while leaving your cable plugged into your phone. When the call has been disconnected your activesync will recognize the connection and sync up again. I don't know why this works, but I've been able to duplicate the results several times.
Same htc ****+ wm. Bought an iphone 3g. Everything must be tuned in windows mobile! It doesn't work how it should!
None of this seems to be working... I've even flashed new roms and it stops working halfway through the sync... it doesn't even appear as though windows recognizes the device... it makes no noise or pop-up when I connect it...
Still charges though... Don't know what is going on...
Reinstall Mobile Device Manager!
modulusman said:
None of this seems to be working... I've even flashed new roms and it stops working halfway through the sync... it doesn't even appear as though windows recognizes the device... it makes no noise or pop-up when I connect it...
Still charges though... Don't know what is going on...
Click to expand...
Click to collapse
I've experienced this issue multiple times, as I use my TP to sync with many stations. The solution is way more simple than you think and it has nothing to do with cables!.
You probably use Win Vista so all you need is to uninstall "Windows Mobile Device Center", restart the PC and install a fresh copy from MS site.
http://www.microsoft.com/downloads/details.aspx?FamilyID=83D513EA-9DF9-4920-AF33-3A0E2E4E7BEB&displaylang=en
If you're on XP, do the same with the Active sync solution for XP.
Good luck!
yeah this happens to me every now and then. the advanced network configuration option really helps, but sometimes i just need to plugin/unplug the usb cable from teh phone/cable or cable/computer a couple more timesbefore it picks it up...
goodluck!
When I got my Captivate and first plugged it in to my laptop, I was surprised when I was greeted with four options on the screen, Kies, Music Device, Media Device, and USB Tethering. Of course, I tried out USB tethering and it worked nicely.
It looks like the latest OTA update just removed that functionality. The option isn't presented when I connect to my laptop. I wonder if they removed it all together or just hide the option.
Of course, there are several other tethering options available, so it's not a great loss, but I thought people might like to know about it. I'm just glad the update didn't brick my phone! Now if I could only fix the problem with the phone turning itself off randomly when it sleeps. This update doesn't seemed to have helped with that problem at all.
Captivate PC Internet (Tethering) Option Gone?
Wow, thanks for the heads up, I kind of figure that may happen they give a little and take a lot. Did you have the dreaded GPS issue and if you did was it fixed? Have you checked to see if the PC Internet option was removed from Settings>Applications>USB Settings?
Thanks Roger
Yes, the OTA took off the usb tethering option in USB settings. GPS does not seem to have been fixed on my end at all. Been about a minute, and navigation is still trying to get a lock.
Autarkhis said:
Yes, the OTA took off the usb tethering option in USB settings. GPS does not seem to have been fixed on my end at all. Been about a minute, and navigation is still trying to get a lock.
Click to expand...
Click to collapse
Thanks, I'll hold out for the Froyo update.
Roger
Why not use pre8?
From a phone on an app
What is pre8?
I just did the update and now I'm screwed. I'm at work with a bunch of homework to do and can't tether. How can I fix this before tomorrow night? I don't want to root my phone and can't use pdanet because my laptop doesn't have Bluetooth.
why not flash cognition ? That has mobileap in it...
Sent from my SAMSUNG-SGH-I897 using XDA App
Since I don't want to root my phone are my only options to either add Bluetooth to my laptop and pay for pdanet or add tethering to my plan?
jamespaulritter said:
Since I don't want to root my phone are my only options to either add Bluetooth to my laptop and pay for pdanet or add tethering to my plan?
Click to expand...
Click to collapse
Have you looked into the 1-click factory restore option?
i dont think that it requires root to work.
I just broke down and bought easy teather works great.
Sent from my SAMSUNG-SGH-I897 using XDA App
still having a little bit hassle on having a lock or fix location. always needs the help of network. GPS alone is kinda........urrrrggghhh!
If you are ok with a USB cable, I found a way to still use tethering over the USB cable after the OTA update. It is just not a straight forward as it was before. Here is how I got it to work on stock ROM, no root access.
Plug in USB cable and connect to PC. Select Mass Storage mode (when you have activated the Ask on connection in the USB Settings - Application menu under Settings). Fully connect you phone to the PC, by pulling down the Status bar and selecting the USB connect line and making the internal (and optional if you have installed external) Memory card visible on your PC. The on the PC disconnect the USB drives again (you have to disconnect first on the PC) and then end the USB Mass Storage mode by pulling again down the Status Bar on the phone and turn off the USB connection. Then when you unplug the USB cable and replug it and now select the Kies connection type, it will successfully connect to Samsung Kies. If you now have Samsung Kies on your PC installed (the UK version)you can select there the Tethering and start it and you can connect and your phone will do Tethering.
I tried it several times and every time it worked. This is not as elegant as it was before, but at least if you need an internet connection and your phone is the only way to get to it, you can still tether.
Hope this will help someone out there who needs a PC connection!
thgoepel said:
If you are ok with a USB cable, I found a way to still use tethering over the USB cable after the OTA update. It is just not a straight forward as it was before. Here is how I got it to work on stock ROM, no root access.
Plug in USB cable and connect to PC. Select Mass Storage mode (when you have activated the Ask on connection in the USB Settings - Application menu under Settings). Fully connect you phone to the PC, by pulling down the Status bar and selecting the USB connect line and making the internal (and optional if you have installed external) Memory card visible on your PC. The on the PC disconnect the USB drives again (you have to disconnect first on the PC) and then end the USB Mass Storage mode by pulling again down the Status Bar on the phone and turn off the USB connection. Then when you unplug the USB cable and replug it and now select the Kies connection type, it will successfully connect to Samsung Kies. If you now have Samsung Kies on your PC installed (the UK version)you can select there the Tethering and start it and you can connect and your phone will do Tethering.
I tried it several times and every time it worked. This is not as elegant as it was before, but at least if you need an internet connection and your phone is the only way to get to it, you can still tether.
Hope this will help someone out there who needs a PC connection!
Click to expand...
Click to collapse
For anybody who is wondering this worked fine for me as well. I selected UK for my location and language. I'll post back up letting you know whether or not it works selecting USA. Once configured and installed, it takes roughly 60 seconds to be up...
thats excellent. i do have Kies installed. I'll give it a shot tonight.
Wifi lost while charging from computer
Can any confirm since the update, wifi connections are now lost while charging from computer via the usb port. Edge or 3g is available if you turn off wifi before connecting. With wifi on, disconnect the usb from the computer and wifi access is again available on the phone.
Running Easytether now. Doesn't require root and seems to work fine. Available on the market, if you pull your sim card. $10 for the full licensed version.
Samsung Kies is free software specifically for the galaxy s series and allows you to tether.
The link is below. being a new member they wont let me post an actual link.
**in.samsungmobile.com/support/softwaremanuals/software.do?phone_model=GT-I9000&sw_type=SW**
Is there a way to re-enable the tethering option through the source code or rooting? Also if Froyo is OTA from AT&T, I would assume they would continue to keep this option hidden/removed. Am I right?
Zman28SS said:
Is there a way to re-enable the tethering option through the source code or rooting? Also if Froyo is OTA from AT&T, I would assume they would continue to keep this option hidden/removed. Am I right?
Click to expand...
Click to collapse
Yea, check the android development section. The Cognition ROM re-enables both USB and Wireless tether...
Tethering was not removed by the update. You don't need Kies installed, you don't need root, and you don't need any tricks. If you select the "Kies (firmware update)" mode, tethering works fine, assuming you've installed the USB drivers and created the necessary dial-up networking connection for the USB mode.
I want to know if there is a way to use an android device as a wireless adapter? Not wireless tethering of your data connection but the ability to use the wifi connection on your pc.
Sent from my DROID3 using Tapatalk
Turn your data off and turn on your WiFi, connect to the desired network and try to tether via usb to your phone. This should hopefully bridge your connection if you have an aosp ROM. I'm not sure about sense, as I've never tried it on a sense ROM before.
Sent from my PG86100 using XDA App
So you mean download the wirless tether app and use it while data is off? And you can do it via usb?/ I've never used data tethering so idk im a noob
Sent from my DROID3 using Tapatalk
He meant to say, connect to wifi and in settings there will be an option to tether via usb
Although i am also not sure about sense roms
Or you can use a market app
There are many, Easy Tether will do the job
Connect to the wifi network and then use usb tethering
okay well I have a droid 3 so there aren't any roms out for it and when I try a wifi tether app from the market it disables your wifi
Sent from my DROID3 using Tapatalk
Moved to proper section
yus4eel said:
okay well I have a droid 3 so there aren't any roms out for it and when I try a wifi tether app from the market it disables your wifi
Sent from my DROID3 using Tapatalk
Click to expand...
Click to collapse
Okay, so basically what you're going to be doing is using your phone as a USB WiFi dongle. To do this, follow these instructions VERY carefully.
1) Assuming that you are already rooted (via z4root, Gingerbreak, or some other means), search for "EasyTether Lite" on the Android Market and download it.
2) Go into Settings>Wireless & Networks
3) Uncheck the box that says "Mobile Network", "3G", "Mobile Data" or something along those lines.
4) Check the box that says "WiFi" and connect to the desired network.
5) Now, download and install the drivers you need for EasyTether to work with your computer here (note that you are going to do this from your computer and not your phone): http://www.mobile-stream.com/easytether/drivers.html
6) Connect your phone to your computer via USB cable and open the EasyTether app. Enable tethering and with a little bit of magic and fairy dust, you should now have a connection on your computer.
Good luck mate.
Need for same
Need an expert here!
what we look for is using android phone to connect other devices not only to internet but also to each other .
We could do it with our modem,but with tethering is like a hotspot , every device can connect internet but cannot see other devices.
Everywhere i looked was explainin "how to tether" which is built in android 2.2 already.
Helps will be highly appreciated
Is it too simple?
I had trouble getting USB tethering on my macbook, not my PC, but:
I searched the market for USB tethering.
and with "Easy Tether lite" (the first app in the search results; there are other options, I tried this one first and it worked great).
I installed on my phone, ran it, followed the wizard, had to install USB tethering drivers for OS X at some point.
Now:
Phone getting WiFi from my router and entering my computer via usb.
I even set it up now to send this very post!!
cheers,
-nerB
EDIT: (Hmm, your syntax is kind of shaky, original poster... You don't mean use the computer as a wireless adapter for your phone do you?? that would be internet pass-through, yes? I think you do mean USB tethering but using a WiFi source, not the mobile connection. Is this as simple as hooking up a usb data tether but using the WiFi instead of 3G from your phone, such as to use a dingy laptop without wireless to get the WiFi in a Starbucks/etc/etc? Hmm.
Otherwise, your phone is not a WiFi wireless adapter, it has one that your phone OS connects to, which then "usb tethers" to computer...
I've never even seen a usb cable that connects a mobile phone to a mobile phone. Haha. I suppose if you had one, you should be able to USB tether from one phone and Internet Pass-Through on the other.....:/ )
Check out this thing called Bluetooth for that. It works wonders.
Sent from my ICS loving Evo 3D.
solution without additional software while having cyanogenmod
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.
Chiefbrain said:
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.
Click to expand...
Click to collapse
yet another reason to consider CM flash
Just some questions...
OK GUYS. thnx for the usefull info.
Now i wanna say that suppose we have this wifi dongle for connecting to computer..(see photo attached) we use this for connecting WIFI to our PC's. RIGHT???
NOW i wanna ask if it is possible that we can use our phone instead of this ""DONGLE"" as wifi signal catcher. NEITHER USB NOR WIFI TETHERING(like easy tether lite or many other options available on XDA.) [people are actually asking for "THIS OPTION" so we don't have to spend another 20-30 bucks but they ends up with USB or WIFI tether)
we connect our phone to PC and Search for WIFI Signals on PC... NOT on the phone itself.
please guys, if any one know how to do this then please share. OR please tell if it is possible or not..
thnx...
bump
pump
me too.
I want pc look the android devices (via usb) such as "usb wifi" and control the wifi (of android)
Chiefbrain said:
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.
Click to expand...
Click to collapse
Well sir thanks it surely did help some one out and in this case its me so thanks again ....
using linux
im wondering is there anyway to use my phone as my wifi adpater so that ill install kali linux on my pc and receive wireless ssid
Use phone as wireless adapter for pc
just connect to wifi network in android and connect that android to pc with data cable and enable usb tether in android phone
MikeCriggs said:
Okay, so basically what you're going to be doing is using your phone as a USB WiFi dongle. To do this, follow these instructions VERY carefully.
1) Assuming that you are already rooted (via z4root, Gingerbreak, or some other means), search for "EasyTether Lite" on the Android Market and download it.
2) Go into Settings>Wireless & Networks
3) Uncheck the box that says "Mobile Network", "3G", "Mobile Data" or something along those lines.
4) Check the box that says "WiFi" and connect to the desired network.
5) Now, download and install the drivers you need for EasyTether to work with your computer here (note that you are going to do this from your computer and not your phone): http://www.mobile-stream.com/easytether/drivers.html
6) Connect your phone to your computer via USB cable and open the EasyTether app. Enable tethering and with a little bit of magic and fairy dust, you should now have a connection on your computer.
Good luck mate.
Click to expand...
Click to collapse
sorry for bringin up a old thread
but man ure a life saver my dongle died on one of my pcs and i used the same method for my LG G4 works like a charm
thank you a million times man
I actually just tried the above program and it works. It has serious limitations if your not getting the paid version. Blocks a bunch of webs sites and all secure ones. It does work though. I really wish Verizon would not have found it necessary to remove wifi sharing over USB for some dam reason. The S7 I have, had it factory and they removed it. Not sure why? Seeing how it does not have a fuking thing to do with the mobile network. I can actual tether my computer by USB using mobile network and can't from my wifi. Can already bypass they're tethering fee.
I will continue reading and searching till I find a way to undo or work around big reds unnecessary removal of this feature. Even if it involves crawling a 1000 miles on my hands and knees, on broken glass to find some big wig and beating the reversal out of him with the very S7 I'm typing this on.
Hi all
I've had my N5 a couple of weeks now, and it's working nicely, except for getting bluetooth and USB tethering to work smoothly. I wonder if anyone has any suggestions?
I can connect the phone to my laptop via USB (I'm running W8 x64, for my sins), and use MTP and PTP without a problem. Selecting USB tethering results in the phone saying "tethered", but nothing appearing in the list of network adapters.
I can pair the phone with the laptop, but the only services that seem to be offered are file-transfer and audio stuff.
If I enable USB debugging, the network shows on the laptop, and seems to work OK for a while. Sometimes the phone wants to reboot while doing this (typically after a couple of minutes).
Interestingly, Device Manager shows the phone as a Nexus 5 under the 'Other Devices' category only when USB debugging is enabled, otherwise it displays as 'ADB Device' only if 'PTP' is selected, and the phone is absent when 'MTP' is selected.
I'm guessing that this is a driver issue of some sort (I hate Windows), and have had a go at installing the LG United driver, to no avail. Any pointers gratefully received.
Cheers
Charlie
I'm having issues tethering with Windows 8, both wifi hotspot and USB tethering. I can connect and it will show up as internet connected then just die. Connection even goes on my phone.
However when USB tethering with OS X all I had to do was download a package from here http://joshuawise.com/horndis, after that it pops up straight away and I don't have any problems. Can tether for ages no problems.
Will probably try a custom rom soon see if it is to do with the Nexus 5 stock rom.
Hi Charlie,
I'm having the very same problem. With my Galaxy S3, I would tether (via BT, as it was a fast connection that didn't drain my battery like WiFi hotspot!) all day long with a Win8 ultrabook. Worked brilliantly!
Just picked up a Nexus 5 last night. My Nexus 7 tablet can use the phone's internet no problem, but my Win8 machine gives no such options. All I have is a "direct connection" service visible to the laptop, I suppose for file sharing.
Has anyone made any progress on this issue at all? It seems that the problem lies with Windows8. It boggles my mind why the Nexus 5's BT tethering implementation is so different than the GS3's...
Progress report: it seems I have tethering over BT working!
I've tried a bunch of different things... the challenge now, is to figure out what it was that worked...
I would try this first: remove the Bluetooth pairing between your PC and your Nexus 5. Ensure that "Bluetooth Tethering" is indeed checked in "Tethering and Portable Hotspot" menu (under Android settings) BEFORE pairing. That might be what I did wrong, in fact.
I restarted my PC, and voila, when right-clicking on the phone pairing on my PC, under the "Connect" menu, suddenly there's an "Access Point" service visible.
I'm pretty confident the above might fix you up.
[PS: If not, the only other thing I did differently when I first tried, was I paired the phone through Win8's buried bluetooth devices menu (avoiding the alternative MetroUI interface at all costs, as I normally do). I don't see any reason why using either UI should provide different results, but hey.]
Hello guys
I just wanted a help
My PC doesn't have WiFi
But I wanted to use Shareit on it.
So I was planning to use my another phone WiFi as a WiFi dongal to my PC
Is there any way to do so?
Thanks in Anticipation
I'm not sure you can do that, but if you could, it would probably involve USB tethering which should get the job done. Just do a search for "tutorial USB tethering" or something similar and you'll get loads of guides.
It just tethers your data from your phone to your computer through the USB cable which is more dependable and consistent in my experience. Depending on your phone and carrier, you may be able to just turn it on in your settings with the appropriate drivers on the computer. My phone doesn't have it by default so I use FoxFi which has support for WiFi (which you don't have), Bluetooth and USB tethering.