Hi I hope someone can help me with this problem, I have rooted my Moto g2 XT1068 and installed TWRP however there were issues with SD card access, so I planned to install Lineage OS but somewhere along the line I must have messed up because the phone will no longer boot up.
I can still force the phone into fastboot screen with power + down buttons and connect to my Windows PC with “Minimal ADB and Fastboot” but running the command fastboot flash recovery TWRP.img returns
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery TWRP.img
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
target reported max download size of 536870912 bytes
sending 'recovery' (4598 KB)...
OKAY [ 0.188s]
writing 'recovery'...
OKAY [ 0.311s]
finished. total time: 0.505s
But on trying to reboot it seems to get stuck in the screen which says "Warning, bootloader unlocked", which is normal since unlocking, but the problem is that it gets no further than this even if I leave it on overnight.
Any help would be much appreciated.
Progress!
Hold the front page, I have found the stock firmware here https://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682 and am restoring back to stock.
The question is... am I brave enough to attempt to install the Lineage OS???
Related
Okay, so all day, I've been trying to fix this damn phone because of a root fail. I unlocked the bootloader, installed SuperSU and now the phone just reboots with a white screen and red words saying this build is for development purposdes only. I can get to download and bootloader mode fine though. Its S-On Bootloader Unlocked. I would honestly settle for it to be set to factory settings as I just need the phone fixed. Rooting has been so stressful. I don't care about losing data.
I'm thinking it failed because I used an SDHC 32GB Micro SD Card? Ive been trying to use a recovery img, Im using HTC Android Phone ROM Update Utility and thats not working. It asks to update the ROm version from 3.35.401.12 to image version (shows nothing). Then it says image error 158 (cannot update my android phone).
When flashing a recovery image, I get:
C:\Users\shaif\Downloads\Root M9>fastboot flash recovery recovery.img
target reported max download size of 800000000 bytes
sending 'recovery' (32848 KB)...
OKAY [ 2.503s]
writing 'recovery'...
(bootloader) HOSD CL#671758
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 2.792s]
finished. total time: 5.301s
Still not working.
Also tried fastboot oem rebootRUU but that took me to a screen that says Security Warning
Someone please help me, Im desperate
Hi !
I see that you have fixed your issue https://forum.xda-developers.com/showpost.php?p=71188370&postcount=1372 so I close this down
Cheers !
Hi my dads Moto G seems to be stuck in a bootloop.
It powers on and we get the Motorola screen followed by vibration then nothing it just seems to get stuck
I've tried Holding power + volume down and volume up on recovery it reboots and the screen goes black but every 10 seconds its as if the screen flashes and i get a glimpse of the android recovery icon
All the options it restarts then gets stuck at the moto logo screen again.
Any ideas? its out of warranty
I've downloaded minimal Abd and fastboot along with the motorola stock firmware
I've put the firmware and adb in the same folder on my desktop and start the recovery process
fastboot devices
TA00303RVM fastboot
fastboot flash partition gpt.bin
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slotartition: not found
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 9.960s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 21.375s
Any ideas where im going wrong?
You need to unlock the bootloader before flashing.
Thanks didn't see that mentioned in the guide I was following I'll give it a try 2mos.
Happy New Year
Right i think ive unlocked the bootloader.
Device is saying UNLOCKED. Status code 3
But i'm still getting the same error.??
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot: partition: not found
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 5.055s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 5.385s
The phone says Version downgraded for primary_gpt
Anyone? or is the phone dead
Hi I flashed my recovery to TWRP recovery, but unfortunately if I enter recovery mode in boot menu I'll get "no command" screen and I have no idea what causes that.
commands I ran:
Code:
PS C:\Users\honza\Downloads\twrp> fastboot oem unlock
...
(bootloader) Showing Options on Display.
(bootloader) Use device keys for selection.
(bootloader) erasing userdata...
(bootloader) erasing userdata done
(bootloader) erasing cache...
(bootloader) erasing cache done
(bootloader) unlocking...
(bootloader) Bootloader is unlocked now.
OKAY [ 20.799s]
finished. total time: 20.799s
PS C:\Users\honza\Downloads\twrp> fastboot flash recovery twrp-3.2.3-0-shieldtablet.img
target reported max download size of 100663296 bytes
sending 'recovery' (12448 KB)...
OKAY [ 0.545s]
writing 'recovery'...
OKAY [ 0.456s]
finished. total time: 1.001s
PS C:\Users\honza\Downloads\twrp> fastboot reboot
rebooting...
finished. total time: 0.017s
PS C:\Users\honza\Downloads\twrp> adb devices
List of devices attached
PS C:\Users\honza\Downloads\twrp> fastboot devices
thanks for help.
temporaly solved
I tried to use "fastboot boot" and this works well, and since I need TWRP only temporaly this solution is sufficient for me.
Please help!!
I have messed up my oneplus one bacon
I was using lineageos 16 and all was fine. For some dumb reason like getting 'Screen mirroring' feature, I decided to go back to lineageos 15.1. Somewhere in the instructions I [mis]read, a clean wipe is recommended to go back to previous release.
I wiped all my partitions from twrp. That's why, my system partition is gone.
I tried a bunch of things after searching on these forums for similar symptoms, but no luck as of yet.
I tried to flash the stock recovery and stock ROM
Recovery flash was successful and so I am on CWM, but the ROM failed as the system partition could not be mounted/unmounted
Now, my phone's state -- I have Cyanogen recovery
ADB devices does not work.
> adb reboot bootloader
adb server is out of date. killing...
* daemon started successfully *
error: device not found
Fastboot works, but am unable to unlock my bootloader, not sure how it got locked.
>fastboot oem unlock
OKAY [ 0.009s]
Finished. Total time: 0.019s
It simple reboots to the recovery without unlocking
>fastboot oem device-info
(bootloader) Device tampered: true
(bootloader) Device unlocked: false
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
(bootloader) console_enabled: 0
(bootloader) exec_console_unconsole: 0
OKAY [ 0.021s]
Finished. Total time: 0.028s
I tried sideload to upload files like stock ROM, I get verification errors.
I was hoping this thread would help me. But not sure how to apply this fix
I am unable to flash or boot as I get the following error
> fastboot flash recovery recovery.img
target reported max download size of 1073741824 bytes
sending 'recovery' (9968 KB)...
OKAY [ 0.317s]
writing 'recovery'...
FAILED (remote: Device not unlocked cannot flash or erase)
>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.318s]
booting...
FAILED (remote: Device not unlocked cannot boot)
finished. total time: 0.339s
Please help!!!
Hi, I am new here and I wanted some assistnce to get my old Moto G working. Its stuck in boot loop. When I power it on, it is looping on the Moto screen. I tried flashing it seeing some old threads here and was getting remote failure. I also tried custom recovery but it was failing. I can see Motorola AD Interface on the PC and I have installed all drivers as well. Whatever i try just fails with the same message. "FAILED (remote failure)"
I also a saw thread which talked about the PC to show QLoader9008 in device manager but that also doesnt show in my device manager. I can just see Motorola ADB Interface.
Anything we can do to fix it. I'd really want it to get back to life if its possible.
Thank You for the help in advance.
Images tried
Motorola_Moto_G_XT1033_Falcon_ASIA_DS_5.1_LPBS23.13-56-2_CID7_CFC1
XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml by jame
Motorola_Moto_G_XT1033_FALCON_TIMBR_DS_5.1_LPBS23.13-56-2_CID12_5.1
Tools used
RSDLite 6.2.4
mfastboot-v2
Fastboot
Log Sample
F:\DownloadsFolder\Motorola_Moto_G_XT1033_Falcon_ASIA_DS_5.1_LPBS23.13-56-2_CID7_CFC1\Motorola_Moto_G_XT1033_Falcon_ASIA_DS_5.1_LPBS23.13-56-2_CID7_CFC\Firmware>fastboot flash partition gpt.bin
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slotartition: not found
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 9.950s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 15.225s
If
maau1985 said:
Hi, I am new here and I wanted some assistnce to get my old Moto G working. Its stuck in boot loop. When I power it on, it is looping on the Moto screen. I tried flashing it seeing some old threads here and was getting remote failure. I also tried custom recovery but it was failing. I can see Motorola AD Interface on the PC and I have installed all drivers as well. Whatever i try just fails with the same message. "FAILED (remote failure)"
I also a saw thread which talked about the PC to show QLoader9008 in device manager but that also doesnt show in my device manager. I can just see Motorola ADB Interface.
Anything we can do to fix it. I'd really want it to get back to life if its possible.
Thank You for the help in advance.
Images tried
Motorola_Moto_G_XT1033_Falcon_ASIA_DS_5.1_LPBS23.13-56-2_CID7_CFC1
XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml by jame
Motorola_Moto_G_XT1033_FALCON_TIMBR_DS_5.1_LPBS23.13-56-2_CID12_5.1
Tools used
RSDLite 6.2.4
mfastboot-v2
Fastboot
Log Sample
F:\DownloadsFolder\Motorola_Moto_G_XT1033_Falcon_ASIA_DS_5.1_LPBS23.13-56-2_CID7_CFC1\Motorola_Moto_G_XT1033_Falcon_ASIA_DS_5.1_LPBS23.13-56-2_CID7_CFC\Firmware>fastboot flash partition gpt.bin
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slotartition: not found
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 9.950s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 15.225s
Click to expand...
Click to collapse
If you have not already, first you need to unlock your bootlloader before flashing anything.