Hi, I am new here and I wanted some assistnce to get my old Moto G working. Its stuck in boot loop. When I power it on, it is looping on the Moto screen. I tried flashing it seeing some old threads here and was getting remote failure. I also tried custom recovery but it was failing. I can see Motorola AD Interface on the PC and I have installed all drivers as well. Whatever i try just fails with the same message. "FAILED (remote failure)"
I also a saw thread which talked about the PC to show QLoader9008 in device manager but that also doesnt show in my device manager. I can just see Motorola ADB Interface.
Anything we can do to fix it. I'd really want it to get back to life if its possible.
Thank You for the help in advance.
Images tried
Motorola_Moto_G_XT1033_Falcon_ASIA_DS_5.1_LPBS23.13-56-2_CID7_CFC1
XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml by jame
Motorola_Moto_G_XT1033_FALCON_TIMBR_DS_5.1_LPBS23.13-56-2_CID12_5.1
Tools used
RSDLite 6.2.4
mfastboot-v2
Fastboot
Log Sample
F:\DownloadsFolder\Motorola_Moto_G_XT1033_Falcon_ASIA_DS_5.1_LPBS23.13-56-2_CID7_CFC1\Motorola_Moto_G_XT1033_Falcon_ASIA_DS_5.1_LPBS23.13-56-2_CID7_CFC\Firmware>fastboot flash partition gpt.bin
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slotartition: not found
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 9.950s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 15.225s
If
maau1985 said:
Hi, I am new here and I wanted some assistnce to get my old Moto G working. Its stuck in boot loop. When I power it on, it is looping on the Moto screen. I tried flashing it seeing some old threads here and was getting remote failure. I also tried custom recovery but it was failing. I can see Motorola AD Interface on the PC and I have installed all drivers as well. Whatever i try just fails with the same message. "FAILED (remote failure)"
I also a saw thread which talked about the PC to show QLoader9008 in device manager but that also doesnt show in my device manager. I can just see Motorola ADB Interface.
Anything we can do to fix it. I'd really want it to get back to life if its possible.
Thank You for the help in advance.
Images tried
Motorola_Moto_G_XT1033_Falcon_ASIA_DS_5.1_LPBS23.13-56-2_CID7_CFC1
XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml by jame
Motorola_Moto_G_XT1033_FALCON_TIMBR_DS_5.1_LPBS23.13-56-2_CID12_5.1
Tools used
RSDLite 6.2.4
mfastboot-v2
Fastboot
Log Sample
F:\DownloadsFolder\Motorola_Moto_G_XT1033_Falcon_ASIA_DS_5.1_LPBS23.13-56-2_CID7_CFC1\Motorola_Moto_G_XT1033_Falcon_ASIA_DS_5.1_LPBS23.13-56-2_CID7_CFC\Firmware>fastboot flash partition gpt.bin
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slotartition: not found
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 9.950s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 15.225s
Click to expand...
Click to collapse
If you have not already, first you need to unlock your bootlloader before flashing anything.
Related
Q&A for [TOOL] Unbrick Corrupted Bootloader
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
How do I unbrick corrupted Bootloader in XT1069?
http://forum.xda-developers.com/moto-g-2014/help/help-wipe-xt1069-t2899434
Moto G xt1031 Failed to initiate partition and bootloader locked cant select any opt
So i was in the process of putting in a new rom on my moto g using flashify and it went all bad after reboot. It got stuck in a bootloop and any selection i made just gave me failed to validate boot image. Ive tried many different methods and none have worked or i get stuck on one of the steps. I am fairly new to custom roms kernels flashing and rooting and basically have learned what i know from teaching myself and reading up on forums.. Please help as soon as possible i will be very grateful. I have tried @Boss442 thread and kinda stuck i wish i could at least be able to send a message but since i am absolutely brand new to xda in order for me to do that i have to write 10 posts so i thought why not just write my own. Also my bootloader relocked itself so i think thats one of the reasons why i cant load anything to it or might be because i dont have adb enabled on my phone but how can i do that when i cant even get into the actual phone.
Hi, Giovanni need ur help, i stucked in
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
actually my phone is bricked for the script, and I tried with all MBM versions my phone is locked now.
Helppp PLsss i need my Moto G
ditto. I think the nand might just be corrupt, though, I dunno. same error message.
torqueo said:
ditto. I think the nand might just be corrupt, though, I dunno. same error message.
Click to expand...
Click to collapse
Thx u know how fix the nand?
unexpected packet
I'm getting this on moto G, and the bootloader was corrupted after i've received and installed system update 4.4 today
opening device: \\.\COM5
OKAY [ -0.000s]
greeting device for command mode
OKAY [ 1.763s]
identifying device
Unexpected packet: 4. Was expecting: 14
FAILED (blank-flash:sahara-chip-stat:unexpected packet)
I had a weird problem and posted at http://forum.xda-developers.com/moto-g/help/hard-bricked-trying-to-update-to-4-4-4-t2926071
I have error
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
Notification LED solid on plug
Hi,
I my Moto G 4G also bricked after it ran out of battery.
The notification LED just remains solid when I plug in the USB cable.
The PC doesn't even recognize the phone.
Left it a day charging in a 1.5A charger and still wouldn't turn on.
Left it another day charging in the PC, still nothing.
Any idea if this phone still has hope?
Moto G 4G steady led
My Moto G 4G doesn't want to power on or charge anymore after losing battery 1 night.
I can't get into fastboot and the PC doesn't recognize the device.
Everytime I plug it to a charger or PC, the notification LED is just always on.
Is there still a way to salvage this?
I have this error:
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
Phone breaked after OTA update from retail.en.us 4.4.3 to 4.4.4.
Wilk this procedure work on moto g 2ndgen
I have moto g 2nd gen.and its not turning on.tried most ways.none worked.it shows the qhusb_bulk in pc.wil the above procedure work or can u help with specific steps for my phone
najin said:
I have moto g 2nd gen.and its not turning on.tried most ways.none worked.it shows the qhusb_bulk in pc.wil the above procedure work or can u help with specific steps for my phone
Click to expand...
Click to collapse
I will try to make unbricker to 2nd gen, but i dont have a moto g 2nd gen, if someone can send me a broken moto g i can develop an app that repair it
moto g xt1033 rom TIM-BR-DS_4.4.4_KXB21.14-L1.40_37_cid12_CFC_1FF_SVC
Hi felas,
i got a xt1033 with fastboot 41.13. this device is locked and i try to flash a rom
TIM-BR-DS_4.4.4_KXB21.14-L1.40_37_cid12_CFC_1FF_SVC
and i got it this report
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
C:\Users\RUIVO\Desktop\#Roms moto G\Roms\TIM-BR-DS_4.4.4_KXB21.14-L1.40_37_cid12
_CFC_1FF_SVC.xml>SET fastboot=.\mfastboot-v2\mfastboot.exe
C:\Users\RUIVO\Desktop\#Roms moto G\Roms\TIM-BR-DS_4.4.4_KXB21.14-L1.40_37_cid12
_CFC_1FF_SVC.xml>.\mfastboot-v2\mfastboot.exe flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.020s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.360s]
finished. total time: 0.400s
C:\Users\RUIVO\Desktop\#Roms moto G\Roms\TIM-BR-DS_4.4.4_KXB21.14-L1.40_37_cid12
_CFC_1FF_SVC.xml>.\mfastboot-v2\mfastboot.exe flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.102s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) Failed to flash partition tz
(bootloader) Failed to flash tz
FAILED (remote failure)
finished. total time: 11.075s
C:\Users\RUIVO\Desktop\#Roms moto G\Roms\TIM-BR-DS_4.4.4_KXB21.14-L1.40_37_cid12
_CFC_1FF_SVC.xml>.\mfastboot-v2\mfastboot.exe reboot-bootloader
rebooting into bootloader...
OKAY [ -0.000s]
finished. total time: -0.000s
C:\Users\RUIVO\Desktop\#Roms moto G\Roms\TIM-BR-DS_4.4.4_KXB21.14-L1.40_37_cid12
_CFC_1FF_SVC.xml>.\mfastboot-v2\mfastboot.exe flash logo logo.bin
C:\Users\RUIVO\Desktop\#Roms moto G\Roms\TIM-BR-DS_4.4.4_KXB21.14-L1.40_37_cid12
_CFC_1FF_SVC.xml>.\mfastboot-v2\mfastboot.exe flash boot boot.img
< waiting for device >
---------------------------------------------------------------------------------------------------------------------------------------------------------
And this is device info report of my phone
---------------------------------------------------------------------------------------------------------------------------------------------------------
(bootloader) version: 0.5
(bootloader) version-bootloader: 4113(*)
(bootloader) product: falcon
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x5
(bootloader) emmc: 8GB Sandisk REV=06 PRV=07 TYPE=
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno: c8295d
(bootloader) cid: 0xFFFF
(bootloader) channelid: 0xDEAD
(bootloader) uid: 72E149030F000000000000000000
(bootloader) unlocked: Not supported
(bootloader) iswarrantyvoid: Not supported
(bootloader) mot_sst: 8
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partitio
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sdi.git:
(bootloader) sbl1.git:
(bootloader) rpm.git:
(bootloader) tz.git:
(bootloader) aboot.git: git=MBM-NG-V41.13-0-g7dc8e
(bootloader) qe:
(bootloader) ro.carrier:
all: listed above
finished. total time: 0.057s
---------------------------------------------------------------------------------------------------------------------------------------------------------
Sorry for my bad english. Im brazilian and i want to revive my xt1033.
Thanks
My Moto G died and after performing all the steps I can not revive esto.Con blankflash to 4.4.4 I have this error "FAILED (blank-flash: sdl-transfer-image: send-image: Error reading packet)"
corrupted MBM-CI_4.4.4 for Moto G
I agree with suhridkhan that this file is corrupted.
I can download it, but no zip program will work, throwing up a 'this is not a valid Win32 application' message.
Does anyone have an uncorrupted 4.4.4 blankflash file.
Or is there yet an Android 5 file?
There is huge problem(s) with my moto g.
1)when it is booted into the stock rom(i didn't change it after unlocking the bootloader and rooting ) it constantly shows that gapps have crashed.
2)when i boot into recovery(twrp 2.6.3.3) it is stuck on the teamwin screen.
3)i tried to reflash stock by the instructions given in this thread with out locking the device i.e. 4.2 and 4.4, neither cmd nor the bootloader shows any error and that every thing is flashed and erased perfectly. But there is no change in the state of the mobile i.e. problem 1 and 2 still remain.
4) when i try to follow whole instructions i.e. locking the boot loader .every thing flashes perfectly but cmd says sst failure and bootloader says "Hab check for system failed .".But there is no change in the system, when i boot the phone it still says gapps crashed repeatedly and none of the user data is erased.
5)fastboot works in bootloader and when booted into device but adb works neither in device nor in bootloader "adb get-state" always returns unknown.
6)the bootloader says status code:3(i dont know if it is supposed to mean something or not)
i Want to know if my bootloader is corrupted or not.
and how can i fix my device..
my firmware version is 4.4.4
Please do reply...
it is my only device and i can not even make calls i have been stuck with the problem since a week.
I don't understand what "Run Fastboot_IMG1" means. What exactly do I have to do?
hi
if u can get ito download mode search how to install android 5.0 lollipop on to moto g on youtube in the video the guy doing the tutorial will show u some command pronmpts to flash the stock firmware onto your phone i have a feeling this will work for u but only if u can go into download mode
Hello,
I am attempting to root my Motorola Moto E 2nd Gen and have hit a wall. I have successfully unlocked my device but have come to a stand still after getting quite frustrated with the unsuccessful flashing of the TWRP. Once I get to the "fastboot flash recovery recovery.img" part in the command prompt, I continually receive the message as follows:
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
target reported max download size of 299892736 bytes
sending 'recovery' (14348 KB)...
OKAY [ 0.527s]
writing 'recovery'...
(bootloader) Image size exeeded partition limits
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.579s
OR...when I apply the command "fastboot flash recovery twrp.img" (which the twrp.img file is correctly added to the folder the same as the recovery.img file downloaded from the XDA site), I get the message as follows:
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
target reported max download size of 299892736 bytes
sending 'recovery' (16152 KB)...
OKAY [ 0.581s]
writing 'recovery'...
(bootloader) Image size exeeded partition limits
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.634s
SO...I am obviously missing SOMETHING! That is what I need help with. This is my first attempt at rooting a phone so I could use good advice.
Thank you in advance for your time and assistance!
XDA Visitor said:
Hello,
I am attempting to root my Motorola Moto E 2nd Gen and have hit a wall. I have successfully unlocked my device but have come to a stand still after getting quite frustrated with the unsuccessful flashing of the TWRP. Once I get to the "fastboot flash recovery recovery.img" part in the command prompt, I continually receive the message as follows:
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
target reported max download size of 299892736 bytes
sending 'recovery' (14348 KB)...
OKAY [ 0.527s]
writing 'recovery'...
(bootloader) Image size exeeded partition limits
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.579s
OR...when I apply the command "fastboot flash recovery twrp.img" (which the twrp.img file is correctly added to the folder the same as the recovery.img file downloaded from the XDA site), I get the message as follows:
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
target reported max download size of 299892736 bytes
sending 'recovery' (16152 KB)...
OKAY [ 0.581s]
writing 'recovery'...
(bootloader) Image size exeeded partition limits
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.634s
SO...I am obviously missing SOMETHING! That is what I need help with. This is my first attempt at rooting a phone so I could use good advice.
Thank you in advance for your time and assistance!
Click to expand...
Click to collapse
Hi and welcome to XDA.
Your device has a dedicated forum here:
> Moto E 2015 > E 2015 Q&A, Help & Troubleshooting
All questions regarding your device belong in the forum linked above. You'll need to create an account first so you can post in the main forums.
Good luck
Hi my dads Moto G seems to be stuck in a bootloop.
It powers on and we get the Motorola screen followed by vibration then nothing it just seems to get stuck
I've tried Holding power + volume down and volume up on recovery it reboots and the screen goes black but every 10 seconds its as if the screen flashes and i get a glimpse of the android recovery icon
All the options it restarts then gets stuck at the moto logo screen again.
Any ideas? its out of warranty
I've downloaded minimal Abd and fastboot along with the motorola stock firmware
I've put the firmware and adb in the same folder on my desktop and start the recovery process
fastboot devices
TA00303RVM fastboot
fastboot flash partition gpt.bin
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slotartition: not found
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 9.960s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 21.375s
Any ideas where im going wrong?
You need to unlock the bootloader before flashing.
Thanks didn't see that mentioned in the guide I was following I'll give it a try 2mos.
Happy New Year
Right i think ive unlocked the bootloader.
Device is saying UNLOCKED. Status code 3
But i'm still getting the same error.??
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot: partition: not found
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 5.055s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 5.385s
The phone says Version downgraded for primary_gpt
Anyone? or is the phone dead
Hi all Phone is stuck on a bootloop with a white motorola logo.
I've since had a mess and i think ive made it worse!!
I've unlocked the Bootloader & since tried to reflash a stock image but nothings working.
Where am i going wrong????????
My phones a 1st gen XT1039 (It was on Tesco) i can access recovery where it says the device is UNLOCKED Status code 3,Battery OK
but once i try and flash using mflashbootv2 using firmware
(Moto_G_LTE_XT1039)_TESCO-GB_4.4.4_KXB21.14-L1.46_cid7_CFC_1FF.xml
& I've tried
XT1039_PEREGRINE_TESCOGB_5.1_LPBS23.13-17.6-1_cid7_CFC.xml
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
I'm just getting failed to erase partitions etc
C:\Users\Dave\Desktop\mfastboot-v2>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 5.024s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 10.301s
C:\Users\Dave\Desktop\mfastboot-v2>mfastboot flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 5.097s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) Failed to erase partition
(bootloader) Failed to flash tz
FAILED (remote failure)
finished. total time: 10.952s
C:\Users\Dave\Desktop\mfastboot-v2>mfastboot flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 5.057s]
writing 'logo'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition logo
FAILED (remote failure)
finished. total time: 10.082s
C:\Users\Dave\Desktop\mfastboot-v2>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 5.374s]
writing 'boot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition boot
FAILED (remote failure)
finished. total time: 10.784s
C:\Users\Dave\Desktop\mfastboot-v2>mfastboot flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 5.374s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 10.786s
if you're bootloader is unlocked then just flash TWRP Recovery and flash custom ROMs.
jbanti said:
if you're bootloader is unlocked then just flash TWRP Recovery and flash custom ROMs.
Click to expand...
Click to collapse
I've tried flashing via TWRP.
I've followed this guide
Downloaded ABD FASTBOOT and extracted into a folder on my desktop i've also downloaded twrp-3.2.3-0-peregrine.img and put that in the same folder but renamed it recovery.img
I then shift right click > open command window here
I then type
fastboot devices
TA00303RVM fastboot
Then
fastboot flash recovery recovery.img but all i'm getting is errors??
adb-fastboot-latest_win_linux>fastboot flash recovery recovery.img
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
target reported max download size of 536870912 bytes
sending 'recovery' (8332 KB)...
OKAY [ 5.319s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 10.411s
I've never flashed anything before am i missing something? also the phone continues to try to boot up when i dont put it into recovery mode and is only listed under device manager as Qualcomm HS-USB QDLoader 9008
Bettz said:
I've tried flashing via TWRP.
I've followed this guide
Downloaded ABD FASTBOOT and extracted into a folder on my desktop i've also downloaded twrp-3.2.3-0-peregrine.img and put that in the same folder but renamed it recovery.img
I then shift right click > open command window here
I then type
fastboot devices
TA00303RVM fastboot
Then
fastboot flash recovery recovery.img but all i'm getting is errors??
adb-fastboot-latest_win_linux>fastboot flash recovery recovery.img
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
target reported max download size of 536870912 bytes
sending 'recovery' (8332 KB)...
OKAY [ 5.319s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 10.411s
I've never flashed anything before am i missing something? also the phone continues to try to boot up when i dont put it into recovery mode and is only listed under device manager as Qualcomm HS-USB QDLoader 9008
Click to expand...
Click to collapse
you need to unlock the bootloader for flashing recovery and roms.
jbanti said:
you need to unlock the bootloader for flashing recovery and roms.
Click to expand...
Click to collapse
It's saying the bootloaders unlocked
Typed fastboot oem get_unlock_data
Desktop\adb-fastboot-latest_win_linux>fastboot oem get_unlock_data
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) 3A95920045195889#54413030333033
(bootloader) 52564D00585431303339000000#749B
(bootloader) 3CCD3CF018E29770D1AC24AF8A1DADA
(bootloader) D62E1#8E6F800615000000000000000
(bootloader) 0000000
type the following in on the Motorola website
3A95920045195889#5441303033303352564D00585431303339000000#749B3CCD3CF018E29770D1AC24AF8A1DADAD62E1#8E6F8006150000000000000000000000
to generate the unique key
reboot phone back into recovery mode then type the following in adb fastboot
Desktop\adb-fastboot-latest_win_linux>fastboot devices
TA00303RVM fastboot
C:\Users\Desktop\adb-fastboot-latest_win_linux>fastboot oem unlock BZ5CL4FNM4KHWNGZPWCG
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) Device already unlocked!
FAILED (remote failure)
finished. total time: 0.019s
What do i try now?????
Bettz said:
Typed fastboot oem get_unlock_data
Desktop\adb-fastboot-latest_win_linux>fastboot oem get_unlock_data
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) 3A95920045195889#54413030333033
(bootloader) 52564D00585431303339000000#749B
(bootloader) 3CCD3CF018E29770D1AC24AF8A1DADA
(bootloader) D62E1#8E6F800615000000000000000
(bootloader) 0000000
type the following in on the Motorola website
3A95920045195889#5441303033303352564D00585431303339000000#749B3CCD3CF018E29770D1AC24AF8A1DADAD62E1#8E6F8006150000000000000000000000
to generate the unique key
reboot phone back into recovery mode then type the following in adb fastboot
Desktop\adb-fastboot-latest_win_linux>fastboot devices
TA00303RVM fastboot
C:\Users\Desktop\adb-fastboot-latest_win_linux>fastboot oem unlock BZ5CL4FNM4KHWNGZPWCG
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) Device already unlocked!
FAILED (remote failure)
finished. total time: 0.019s
What do i try now?????
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-g/general/guide-unlock-bootloader-root-recovery-t3418432
follow this tutorial.
jbanti said:
you need to unlock the bootloader for flashing recovery and roms.
Click to expand...
Click to collapse
jbanti said:
https://forum.xda-developers.com/moto-g/general/guide-unlock-bootloader-root-recovery-t3418432
follow this tutorial.
Click to expand...
Click to collapse
I get stuck at the following
Download the latest SuperSU flashable zip from
Copy it to your phone.
I can't get access to my phone it doesnt show up on my pc devices etc
Bettz said:
I get stuck at the following
Download the latest SuperSU flashable zip from
Copy it to your phone.
I can't get access to my phone it doesnt show up on my pc devices etc
Click to expand...
Click to collapse
can u access ur twrp recovery?
jbanti said:
can u access ur twrp recovery?
Click to expand...
Click to collapse
Nope
I have similar issue on Moto G Falcon.
The fastboot factory images fail to write partitions. Also can't flash custom Roms. And this was sudden in the middle while I was using custom rom and the phone rebooted on its own one day and never booted up again.
I have a Moto Z3 Play that can't boot anymore. I'm stuck at the bootloader screen. I tried blankflash on Windows and Linux but failed. I tried LMSA but it said the firmware doesn't match. I tried to flash the firmware manually but failed.
On Windows 10, my device is recognized as Mot Composite ADB Interface. My model is XT1929-4
I don't know anything else what I can do to restore it
UPDATE : I think my device is dead. ADB commands doesn't work at all; only fastboot works. There's no partitions at all on my device. When I try to flash bootloader, I get these lines :
(bootloader) slot-suffixes: not found
target reported max download size of 536870912 bytes
sending 'bootloader' (9520 KB)...
OKAY [0.308s]
writing 'bootloader'
(bootloader) Validating 'bootloader.default.xml'
(bootloader) Invalid partition name xbl
(bootloader) Invalid partition name prov
(bootloader) Invalid partition name cmnlib
(bootloader) Invalid partition name cmnlib64
(bootloader) Invalid partition name abl
(bootloader) Invalid partition name keymaster
(bootloader) Invalid partition name storsec
(bootloader) Invalid partition name rpm
(bootloader) Invalid partition name pmic
(bootloader) Invalid partition name hyp
(bootloader) Invalid partition name tz
(bootloader) Invalid partition name devcfg
(bootloader) Cancelling 'bootloader.default.xml'
FAILED (remote failure)
finished. total time: 0.343s
try the motorola restore software
paulhauth25 said:
try the motorola restore software
Click to expand...
Click to collapse
I've already tried the rescue option on LMSA, and that didn't work
For that to work the device needs to be in fasboot mode
paulhauth25 said:
For that to work the device needs to be in fasboot mode
Click to expand...
Click to collapse
That's what I did, and that didn't work
have you tried to boot the twrp recovery on it yet
Yes and it doesn't boot; I saw Motorola logo for a second and the screen became black