So, I brought a softbricked Yuphoria which was stuck on Yu logo when you power it on, No button combination is working you can't go to recovery nor fastboot, every combination leads to the Yu logo. now when I try to connect it to my PC it doesn't show up as any device
I have tried different cables and tried pressing power up while connecting to PC which just leads to the stuck Yu logo.
I don't know what to do I feel like there is software problem Which I can fix since I have even fixed my previous Hardbricked Yuphoria.
Please suggest me something or should I give up on it.!!?
Related
hey guys! I really need help. Actually i have a LG L70 D325 phone and i rooted it few days ago. After that, i installed CMW recovery and i also instaled ROM Manager. I used ROM Manager to install CyanogenMod 12.1 and after that, i installed GApps. As I didnt like the CyanogenMod 12.1 apps, i installed "Cleanser Mod 2.0" . I ran this with ROM Manager and i removed all app in cyanogenMod 12.1. (well, there was a list and i just selected everything. After that, i reboot it and it got stuck on" Android is starting.. starting apps".. its not starting. I want to boot on CWM recovery again but its not working ! I read about volume keys and power button (I tried everything !!), but its not going on CWM recovery !!!. It just boot the "LG logo" again and again till i let go and it continues showing the cyanogen logo and eventually gets stuck on "Android is starting.. ".. i tried connecting it to pc by USB but my pc is not recognising cause the phone is switched off i guess !
Please help me ! I really need my mobile phone !!!
Hi there,
Please make sure you can access Download Mode by turning off your phone, then hold Volume Up and plugging in your USB cable.
After that please read carefully this tutorial and see if you can flash stock firmware thru that tool.
[TUTORIAL] How to flash LG phones with LG Flash Tool 2014
Good luck
Additional info: [Q] How to recover LG l70 D320N?
Hey guys i regularly follow ur posts and those are really helpful but its the first time i am writing as i am ****ed up with my xperia c4 device. Recently i upgraded my xperia c4 to android 6.0.1 marshmallow using your flash tool flash method as i had unlocked my bootloader. after that i found that my device isn't booting into recovery mode. whenever i tried to boot into recovery it stucks at sony xperia logo and after some while it restarts automatically to the system. So i thought the recovery might be deleted when i was flashing the firmware. i was using twrp recovery made by u guys
PHP:
http://forum.xda-developers.com/xperia-c5-ultra/development/bootloader-unlocked-custom-recovery-t3285521
so I flashed that again using fastboot mode and it failed to flash and after that my phone gone totally black. Now none of the switches are working when pressing the power key its not even vibrating. when plugging it to pc via usb top notification led shows red and its not blinking. and the phone is automatically disconnecting after a while. i tried to flash the rom again through flash tool but it is showing "the device is connected usb debugging is off".
I am going crazy. please guys help me to fix this.:crying:
Thanks
Kirito69 said:
Hey guys i regularly follow ur posts and those are really helpful but its the first time i am writing as i am ****ed up with my xperia c4 device. Recently i upgraded my xperia c4 to android 6.0.1 marshmallow using your flash tool flash method as i had unlocked my bootloader. after that i found that my device isn't booting into recovery mode. whenever i tried to boot into recovery it stucks at sony xperia logo and after some while it restarts automatically to the system. So i thought the recovery might be deleted when i was flashing the firmware. i was using twrp recovery made by u guys
PHP:
http://forum.xda-developers.com/xperia-c5-ultra/development/bootloader-unlocked-custom-recovery-t3285521
so I flashed that again using fastboot mode and it failed to flash and after that my phone gone totally black. Now none of the switches are working when pressing the power key its not even vibrating. when plugging it to pc via usb top notification led shows red and its not blinking. and the phone is automatically disconnecting after a while. i tried to flash the rom again through flash tool but it is showing "the device is connected usb debugging is off".
I am going crazy. please guys help me to fix this.:crying:
Thanks
Click to expand...
Click to collapse
Greetings and welcome to assist. I can see you have already found the correct place to ask your question here
http://forum.xda-developers.com/showthread.php?t=3370395
so I'll close this one up
Good Luck
Sawdoctor
so hello everyone my yuphoria y5010a is bricked but it is not totally bricked but fastboot and recovery is not accesable and the phone showing battery low splash screen(boot logo)only i tried method of sd card by dev @Titokhan but emmc dump is not helpful for me, i also tried with QFIL tool but port not showing i have installed qualcomm usb drivers and also adb is there.
anyone witch same problem and any dev who can help is needed.
thank you.
Hi try this press both vol+ n vol- together with battery removed. Then with buttons pressed insert battery n connect to system. U should see port no. I tried it once on snapdragon phone which is stuck on battery logo. Also I later learnt that battery logo is default fastboot mode. Try to flash from that screen. Plz post ur status.
bro i gave phone to sevice center they flashed stock rom on my device so iam good now but thANKS for helping me.
I think i flashed the wrong ROM by mistake in canvas knight2 by twrp and after completing the installation there was option to reboot the phone and after tapping on it the phone becomes dead completely, nothings happening while pressing the power button , not going in recovery mode and don't showing the charging logo when I put it on charge , plz somebody help me :crying:
nishkarsh3696 said:
I think i flashed the wrong ROM by mistake in canvas knight2 by twrp and after completing the installation there was option to reboot the phone and after tapping on it the phone becomes dead completely, nothings happening while pressing the power button , not going in recovery mode and don't showing the charging logo when I put it on charge , plz somebody help me :crying:
Click to expand...
Click to collapse
I think you hard bricked your android. First connect your android to PC via USB and check it detects Qualcomm 9008 port in device manager. If yes then use qfil tool to flash your stock os to your android.
my phone micromax canvas night 2 hardbrick. dont show the boot logo.only show the penkin photo phone switch on mode...flashing proceess is compleate but dont boot the device only vibrate and show the penkin photo...what is this problem my phone please help...only fast boot flashing available in net any other flashing process in this phone ...so please help..
While rebooting phone it loads only yureka image and after that it gets power off. So, finaly I decided to flash it but after connecting to my pc I can't detect it in adb cmd. Whats th actual problem and how can I solve it???please mention thread related to flash YU YUREKA!!!!!!