I reinstalled my s3's system
it showed success but can't boot actually
just show the black screen with red words "SW REV. check fail . device:2 binary.... Download has been failed"
is the firmware problem?
hope somebody can help me
I reinstalled my s3's system
Click to expand...
Click to collapse
Can you explain more?
What you made?
Best Regards
adfree said:
Can you explain more?
What you made?
Best Regards
Click to expand...
Click to collapse
thanks
I tried to upload the picture but didn't succeed
The reason for the problem is that I use netodin to reinstall the system
However, it seems like that the firmware I used to install is older than the gear its existing one
well ,all of the above is my guess
SW REV. check fail . device:2 binary.... Download has been failed
Click to expand...
Click to collapse
SW is Software
REV means Revision...
Samsung have Rollback Prevention... so downgrade is not ever possible...
You can only back to:
Code:
[B]2[/B]BQC5
[B]2[/B]BQH1
But not to:
Code:
[COLOR="Red"][B]1[/B][/COLOR]APK7
You have SM-R760 or SM-R770?
Best Regards
Edit 1.
If problems with Download wireless Mode.. look here:
https://forum.xda-developers.com/showpost.php?p=72292560&postcount=51
If you have the same problems with your (bricked) S3 then go to download wirelessly mode en as soon as you see the flower then push the power button 2 seconds en let it go for 1 second, than push it again for 2 seconds en let it go for one and so on til you get him in to download wirelessly mode. May take some attempts but it saves my ass a few times.
Click to expand...
Click to collapse
adfree said:
SW is Software
REV means Revision...
Samsung have Rollback Prevention... so downgrade is not ever possible...
You can only back to:
But not to:
You have SM-R760 or SM-R770?
Best Regards
Edit 1.
If problems with Download wireless Mode.. look here:
https://forum.xda-developers.com/showpost.php?p=72292560&postcount=51
Click to expand...
Click to collapse
Wow!maybe this is the reason for my problem
My gear is R760 and the firmware which I used was Apk6 ,the older one lol
I'll try the newest one later
Anyway, thank you so much
adfree said:
SW is Software
REV means Revision...
Samsung have Rollback Prevention... so downgrade is not ever possible...
You can only back to:
Code:
[B]2[/B]BQC5
[B]2[/B]BQH1
But not to:
Code:
[COLOR="Red"][B]1[/B][/COLOR]APK7
You have SM-R760 or SM-R770?
Best Regards
Edit 1.
If problems with Download wireless Mode.. look here:
https://forum.xda-developers.com/showpost.php?p=72292560&postcount=51
Click to expand...
Click to collapse
chiyeung524 said:
Wow!maybe this is the reason for my problem
My gear is R760 and the firmware which I used was Apk6 ,the older one lol
I'll try the newest one later
Anyway, thank you so much
Click to expand...
Click to collapse
You can rollback any firmware into R760
Install through net odin this one: https://forum.xda-developers.com/gear-s3/development/rom-samsung-gear-s3-sm-r760-t3588082
After that you can install any firmware.
Downgrade from Tizen 3 is possible too.
@r4yv3n
I have tried from Combination Firmware 2BQC2 to 1APK7 without success.
You are sure you can back from Software Revision 02 to 01?
@chiyeung524
Problem solved?
Device is alive again?
Best Regards
adfree said:
@r4yv3n
I have tried from Combination Firmware 2BQC2 to 1APK7 without success.
You are sure you can back from Software Revision 02 to 01?
@chiyeung524
Problem solved?
Device is alive again?
Best Regards
Click to expand...
Click to collapse
yep
already solved perfectly
now it's BQH1 version
but it didn't receive the push of tizen3 update message
why？thanks
Code:
yep
already solved perfectly
now it's BQH1 version
but it didn't receive the push of tizen3 update message
why？thanks
For few CSC/Sales Code BQH1 is not in FOTA database... but BQC5...
But you could direct flash CQK3...
https://forum.xda-developers.com/gear-s3/how-to/rom-r760xxu2cqk2-samsung-gear-s3-sm-r760-t3712576
Usefull would be... you know your CSC/Sales Code... as few CSC received:
CQK6
Otherwise your next update via FOTA takes "longer"...
Best Regards
adfree said:
For few CSC/Sales Code BQH1 is not in FOTA database... but BQC5...
But you could direct flash CQK3...
https://forum.xda-developers.com/gear-s3/how-to/rom-r760xxu2cqk2-samsung-gear-s3-sm-r760-t3712576
Usefull would be... you know your CSC/Sales Code... as few CSC received:
CQK6
Otherwise your next update via FOTA takes "longer"...
Best Regards
Click to expand...
Click to collapse
thanks for your help:good:
Related
Hello friends,
As promised please find the attached rom, pit, csc for the classic version.
ROM : GoogleDrive
CSC : Zippyshare
PIT : Zippyshare
BOOTLOADER : Zippyshare
Thanks! This is Great!!!
Where did you obtain the files?
I will flash today and try.
If only I hadn't bricked my international classic yesterday, lol.
SirBindy said:
If only I hadn't bricked my international classic yesterday, lol.
Click to expand...
Click to collapse
You will need to connect to the JTAG pins on the watch for jtag flash. To unbrick your device.
Try to use NetOdin first and then flash recovery and kernel again and then reinstall OS.
tids2k said:
You will need to connect to the JTAG pins on the watch for jtag flash. To unbrick your device.
Try to use NetOdin first and then flash recovery and kernel again and then reinstall OS.
Click to expand...
Click to collapse
NetOdin isn't an option. Can't get to download mode.
Thanks! It Worked.
this rom is international ? or other region ?
Hi all,
Can anyone please confirm whether this version will be safe to flash onto an international Gear s3 (Vietnam purchased)? Also, does it enable Samsung Pay?
Thanks,
Paul
I need your help¡¡¡
I folowing step by step the intallation new rom and i did anything that my gear s3 doesn´t work. I can´t put my gear on mode download wireless. The gear s3 turn off in a few seconds. Please that´s happened. Please help me¡¡
Is my first flash. Helpme¡¡
tids2k said:
Hello friends,
As promised please find the attached rom, pit, csc for the classic version.
ROM : GoogleDrive
CSC : Zippyshare
PIT : Zippyshare
BOOTLOADER : Zippyshare
Click to expand...
Click to collapse
Hi,
I have a big problema in my gear S3. I am installed a rom default and then installed this rom. My gear don´t work. Is posible that you say me step by step how install the rom from zero.
Thanks.
@Apirola2
Step 1.
Identify your CORRECT Model Name...
You have SM-R760 OR SM-R770 or something else?
Please, NOT post again something like this:
https://forum.xda-developers.com/showpost.php?p=72332829&postcount=29
Best Regards
It seems APJF is too old...
As we have the problem with Downgrade Bootloader...
BQC5 is not yet available for free... as it seems.
But on paid sites you can find it for SM-R770...
So it is leaked. :good:
WARNING!
Combination Firmware BQC2 is available, BUT this is Service/Factory Firmware...
This could lead to other bigger problems... like disabled wifi...
Then only USB cable... can flash this device.
Best Regards
If it is stuck at samsung bootlogo .. go to download mode ( press power button for 5 seconds, when on the screen it says rebooting, press power button 3 times and then select download mode ( wifi ) then go to your computer and select network ( it should say Gear3-xx-xx ) , it will be an adhoc network. now wait for few seconds on the watch you will get msgs like unable to connect to 192.x.x.x but after 10-30 sec it will say connected to 192.x.x.x. Then open NetOdin and select your previous rom that you had. Or do an ugrade to a newer rom.
Will this work if I have firmware R770xxxu2aqc? I would like to flash it to stock (I'm in the US). Google doesn't bring up much of the Classic version only for the Frontier. And I'm a little confused on the installation process. Thank you for your help.
Will this work if I have firmware R770xxxu2aqc?
Click to expand...
Click to collapse
Really 3 XXX like adult content or better the movie with Vin Diesel...
And no joke... the red marked 2 means... this Firmware is tooooo old... be carefully.
Samsung integrated Rollback Prevention... "Downgrade Protection"
No idea yet, which is latest R770 Firmware public and free available... but you need an 2 instead 1...
Code:
R770XXU[B][COLOR="Red"]1[/COLOR][/B]APJF
Best Regards
Jajaja! So funny. And yes that's what my gear says. Oh ok. I guess I will have to wait for the future and see if anybody does anything with the Gear S3 Classic. So sad. Thank you for your help.
Gear S2 have Live Demo Units...
SM-R720X
SM-R732X
But I never heard of Live Demo Units from Gear S3... in theory not impossible.
To check it could be enough to enter download mode... and check if you see:
SM-R770
or
SM-R770X
BQC5 is also leaked for SM-R770...
R770XXU2BQC5_R770OXA2BQC5_OXA
Code:
AP_R770XXU2BQC5_usr.tar
BL_R770XXU2BQC5_usr.tar
CSC_OXA_R770OXA2BQC5_usr.tar
I can only not remember, if somebody offer this file for free download...
Best Regards
What's new in this version? Is the pay available? Thanks
Hey Guys, I really hope someone's going to know how to fix my problem.
I was an idiot d*ckhead, I didn't read the risks of downgrade before I downloaded this ROM and I fleshed it. I'm not a newbie, but of course it has been bricked. Bootloop and disabled wifi...
Is there any possible way to reanimate my watch (a method for usb flashing or anything) or what should I do?
I was thinking about to give it to Samsung and saying it received an OTA and just died during the update...
Please if anyone can help me, just send me a PM. I've tried to look for those "paying" websites, I wouldn't mind that either.
Thank you so much
@xedamen
If you want, you can contact me via PM...
Meanwhile you could click trough this Thread...
https://forum.xda-developers.com/gear-s3/how-to/gear-s3-android-wear-port-wip-t3584588
Focus on find Service Manual for SM-R770... you can also look into SM-R760 Manual...
Few posts are Pinout related... for soldering wires...
Caution, if you never solder wires to something really tiny... better not try with expensive Gear S3...
Problem... also minimum 1 user failed to connect USB cable to SM-R760...
And I can NOT remember any SM-R770 feedback...
-------------------------------------------------
You could try this... before you start to cry...
https://forum.xda-developers.com/showpost.php?p=72292560&postcount=51
... i found info how to get my S3 back to live again. If you have the same problems with your (bricked) S3 then go to download wirelessly mode en as soon as you see the flower then push the power button 2 seconds en let it go for 1 second, than push it again for 2 seconds en let it go for one and so on til you get him in to download wirelessly mode. May take some attempts but it saves my ass a few times.
Click to expand...
Click to collapse
Not confirmed to fix all problems with all devices and all Firmware combinations... but better try first...
My English is bad...
My German is much better.
If you can German... then feel free to contact me in PM in German. :good:
Best Regards
WARNING!!!
ONLY FOR SM-770
This is the default version!!! Functionality is very limited. It allows you to reset all the settings and lock !!!
It is possible to reset the CSC, you must install this version, and then without any CSC file.
Flash at your own risk!!!
Sewn on the instructions:
File here
Step 1: On your S3 press then hold the Home/Power button until you see the S3 screen shows up "Rebooting..."
Step 2: Release the Home/Power button then quick Press it again 03 times.
Next step, you need to be a bit quicker.
Step 3: Use the Home/Power button to navigate to "Download (wireless)" option, then Press & Hold the Home/Power button to select. You have to be real quick otherwise your S3 will reboot.
Step 4: Press the Home/Power button twice, you will see the "[WPS Mode]" change to "[AP Mode]"
Step 5: Choose the Access point with the same name appears on your S3.
Step 6: Your S3 will show that it's been connected to the IP of your computer.
Step 7: Open the Odin, your S3 will show up.
Step 8: Choose the right file for each Option AP only from the files you extract after downloading. Then press Start and wait the PASS (15-20 minutes)
thanks to @se47 for his guide for the SM-760
...
Okay, so it seems that this firmware has root access enabled by default, as "su" is locate in /bin/su of the rootfs.img. This means that we can pull images from the device and flash custom images once we figure out how to either port Android Wear over or build TWRP!
reserved
*deleted*
I have a ZTO S3 Classic, is it possible to change to XSA flashing this file? I wondering because here in Brazil we have SPay on our Smartphones but not on the Smartwatches yet
@dxzdxz1
Please be carefully...
At the moment I saw 2 devices "die"...
Better wait, if repair is possible "at home" in worst case scenario...
Otherwise you can brick your Gear Wearable... then WiFi not work to connect with device... Odin...
Only as hint.
OWN risk!
Best Regards
Watches die after downgrade Tizen version.
Don't flashing APK3, APK7.
Download only same version BQC2 non-combination or any combination firmware.
Code:
Watches die after downgrade Tizen version.
Don't flashing APK3, APK7.
Download only same version BQC2 non-combination or any combination firmware.
So it looks like again sboot Bootloader is not downgradable... except Combination files downgrade Bootloader (sboot.bin)...
Hmmmm.
Any idea how to detect Bootloader Version on Wearables?
On Tizen Mobile I can see it in Logfiles...
Best Regards
se47 said:
Watches die after downgrade Tizen version.
Don't flashing APK3, APK7.
Download only same version BQC2 non-combination or any combination firmware.
Click to expand...
Click to collapse
I can only find BQC5 firmware to download (for free only the APK6 and APJF)
I imagine that BQC5 will work in this case, but could you confirm to me?
About the CSC reset, after make this CSC Reset thing, would be possible to change my CSC region? It would be awesome if we could change to XSA or any other CSC where SPay works.
AGAIN WARNING!
Be VERY very carefully with these Combination Firmware...
Today 1 user told me via PM...
He is successfully on Combination Firmware... BUT Wifi option is not available for use with WiFi Odin...
We have no solution yet, how to connect without damage device... to USB cable...
OWN RISK!!!
Risk to "softbrick" and/or you are NOT able to flash other Firmware again...
Only as hint.
Best Regards
Please, need info/confirmation.
If Combination Firmware writes older sboot Bootloader aka downgrade...
This should be possible to test with SDB and this Command:
Code:
cat /proc/cmdline
Thanx in advance.
Best Regards
Any newer version ?
Where are these firmwares coming from? I can't pull them from Samfirm or Samfirmware.com
Where are these firmwares coming from? I can't pull them from Samfirm or Samfirmware.com
Click to expand...
Click to collapse
Please read CAREFULLY...
[ROM] [FACTORY] [FTMA]
This means """Combination""" Firmware...
If you not know what it is.
NOT use it.
Own risk.
This is NOT normal leaked Firmware...
Samsung NOT share Gear S3 Firmware...
Only official Firmware updates are over the air... called FOTA...
Odin nor Net Odin nor WiFi Odin...
These are all leaked stuff...
Odin is Service Tool for authorized Service Partner... NOT for public...
Firmware is also leaked... from Service Partner...
Combination Firmware are special Service Tools... NOT for public... NOT for End User.
Again, if you not know what you are doing...
Better not try...
Risk to "soft brick" your Gear Wearable...
Only as info.
You can use Google...
Maybe then more clear what Combination Firmware can do...
Best Regards
I bought early Korean import of gear S3, but I live in US. I did not know SPay would be shut off. Very annoying. Now looking to flash stock ROM that matches my region. I understand this is a common issue.
I have been away from flashing for a long time, but if I understand the information in this forum correctly, flashing a new ROM will automatically cause the S3 to update its region internally. However, downgrading your Tizen version will softbrick the device.
I have SM-R770. Tizen Version 2.3.2.4. Software version BQ--->D<---2. I should NOT attempt to flash this BQ--->C---<2 ROM for risk of softbrick, is this correct?
Please confirm. Thank you!
... flashing a new ROM will automatically cause the S3 to update its region internally.
Click to expand...
Click to collapse
This is IMHO not correct.
Country/Region aka CSC change require special procedure... with Combination Firmware.
This happens not automatically...
Product Code is stored on device in """"protected""" area...
It is not impossible to change Product Code... but is not easy with Flashing via Odin...
Software version BQ--->D<---2. I should NOT attempt to flash this BQ--->C---<2 ROM for risk of softbrick, is this correct?
Click to expand...
Click to collapse
Yes, in main correct...
This Security crap is Bootloader related... sboot.bin...
As Info...
These Firmware packages are 1:1 from Samsung Server...
In theory, if you remove sboot.bin and cm.bin... it could be more safe to flash older Firmware...
THEORY, not confirmed yet for Gear S3
I am doing this only with my Gear S2... SM-R732...
...risk of softbrick...
Click to expand...
Click to collapse
IMHO it is closer to Hardbrick...
As Security disable wireless Download Mode...
To solder 4 wires to PCB... to have USB cable...
This is IMHO Hardware stuff...
Best Regards
Thanks so much for the info! <3
DONT TRY
JazzMac251 said:
Thanks so much for the info! <3
Click to expand...
Click to collapse
I try it, all passed and get the new watch.
Watch can restart, but there's only a SETTING icon in the watch, this is what writer said LIMITED functionalty.
DON"T TRY, you will lost a watch.
Cliff
DON"T TRY, you will lost a watch.
Click to expand...
Click to collapse
Okidoki... but you have repaired now your Watch with correct Firmware?
Or you have still problems?
"Latest" leaked Odin package for SM-R770 is here:
https://forum.xda-developers.com/gear-s3/how-to/rom-samsung-gear-s3-classic-sm-r770-t3646789
R770XXU2BQC5
Best Regards
Recovered
adfree said:
Okidoki... but you have repaired now your Watch with correct Firmware?
Or you have still problems?
"Latest" leaked Odin package for SM-R770 is here:
https://forum.xda-developers.com/gear-s3/how-to/rom-samsung-gear-s3-classic-sm-r770-t3646789
R770XXU2BQC5
Best Regards
Click to expand...
Click to collapse
Thanks Adfree, I can recovery my watch back. One more question, how can I change the CSC file? I think this is the most critical question we are asking for, Please advise.
REgards,
Cliff
Honestly Annoying said:
WARNING!!!
ONLY FOR SM-770
This is the default version!!! Functionality is very limited. It allows you to reset all the settings and lock !!!
Click to expand...
Click to collapse
Wait, does this reset the activation lock? Or what lock are you referring to?
JazzMac251 said:
I bought early Korean import of gear S3, but I live in US. I did not know SPay would be shut off. Very annoying. Now looking to flash stock ROM that matches my region. I understand this is a common issue.
I have been away from flashing for a long time, but if I understand the information in this forum correctly, flashing a new ROM will automatically cause the S3 to update its region internally. However, downgrading your Tizen version will softbrick the device.
I have SM-R770. Tizen Version 2.3.2.4. Software version BQ--->D<---2. I should NOT attempt to flash this BQ--->C---<2 ROM for risk of softbrick, is this correct?
Please confirm. Thank you!
Click to expand...
Click to collapse
i just wanted to guide you to my new post in which i explain how i successfully changed my region on my gear s3 SM-R770: https://forum.xda-developers.com/gear-s3/how-to/succesfully-changed-csc-to-xar-to-t3718236
Dear friends,
I bought a 765f to use it in Italy but the mobile net didn't work. So I had THE IDEA: i flashed my 765f with 765a rom.
Now it is bricked!
there is just a yellow triangle saying i did it with an unauthorized rom!
please help!
sorry, to be precise it was:
https://forum.xda-developers.com/gear-s3/development/rom-samsung-gear-s3-sm-r765-att-t3588066
1.
I can only find Firmware for:
SM-R765A
SM-R765T
SM-R765V
Are you sure you have SM-R765F
Enter Download Mode... check what is on Screen...
I mean NOT Download wireless.. the other Mode in this menu...
2.
In theory you have an problem...
Is Download wireless Mode possible?
Or Boot cycle? Reboot...
Best Regards
Hi,
Thank you for your fast answer.
I have a sm-r765f.
I can enter in download mode and I used wireless download mode to flash it.
Since I can flash it again could you please make available firmware you have?
I could use it until I don't find the proper firmware.
Thanks again.
BTW, it says warranty avoid:0
I have none of these Firmware packages...
I can only see them on paid site...
So they are not free available...
If I can find something... then I will post...
Sorry.
Best Regards
Edit 1.
Google Search...
SM-R765FDAAXSP
So you need something like this:
Code:
R765FXXU2BQD1/R765FOLB2BQD1/R765FXXU2BQD1
[COLOR="Red"]R765FXXU1AQA1/R765FOLB1AQA1/R765FXXU1AQA1
R765FXXU1APL5/R765FOLB1APL5/R765FXXU1APL5[/COLOR]
Next problem you could have...
Samsungs Rollback Prevention... Downgrade Restriction...
If you allready flashed Bootloader with 2... then you can not go back to these red marked Firmware Versions...
Example...
Code:
[B]2[/B]BQD1
Yes, 2nd "Generation" of f. Security
Code:
[COLOR="Red"][B]1[/B][/COLOR]APL5
In Download menu you should see something like R/P... for Rest in Pi ehm Rollback Prevention...
If you see 01... then you have """"luck""""... as you could pay every leaked Firmware...
If 02... then pay only 2BQD1...
It's ok.
Let me know the links and thank you again!
It's a terrible moment for a gadgetoholic :crying:
HELP!!!
adfree said:
I have none of these Firmware packages...
I can only see them on paid site...
So they are not free available...
If I can find something... then I will post...
Sorry.
Best Regards
Edit 1.
Google Search...
SM-R765FDAAXSP
So you need something like this:
Code:
R765FXXU2BQD1/R765FOLB2BQD1/R765FXXU2BQD1
[COLOR="Red"]R765FXXU1AQA1/R765FOLB1AQA1/R765FXXU1AQA1
R765FXXU1APL5/R765FOLB1APL5/R765FXXU1APL5[/COLOR]
Next problem you could have...
Samsungs Rollback Prevention... Downgrade Restriction...
If you allready flashed Bootloader with 2... then you can not go back to these red marked Firmware Versions...
Example...
Code:
[B]2[/B]BQD1
Yes, 2nd "Generation" of f. Security
Code:
[COLOR="Red"][B]1[/B][/COLOR]APL5
In Download menu you should see something like R/P... for Rest in Pi ehm Rollback Prevention...
If you see 01... then you have """"luck""""... as you could pay every leaked Firmware...
If 02... then pay only 2BQD1...
Click to expand...
Click to collapse
so i assume i should have a BL 2.
could you link me some site where i could find a proper firmware to flash?
sorry for the disturb but i am a real newbie.
Thank you
You not disturb... this is open forum.
So you can ask what ever you need.
Only old man can not answer so fast, if he sleep.
Firmware to find is not so easy... especially if for free instead paid...
This Odin packages are only leaked Service Stuff... normally not for public...
For SM-R765F really not easy to find infos... Firmware related...
All I have found is this:
Code:
AP_R765FXXU1AQA1_usr.tar
BL_R765FXXU1AQA1_usr.tar
CP_R765FXXU1AQA1_CL427356_QB5460815_SIGNED.tar
CSC_OLB_R765FOLB1AQA1_usr.tar
If you use Google with 1 of these text strings... you can find site...
I can not advertise paid sites... (toooo much)...
I could give you Links via PM...
Private Message...
So write me PM...
Firmware I've found is old... 1AQA1
Best Regards
can anyone post some links to sites where i could find the sm-r765f ROM with the bootloader 2?
I can't see my S3 lte bricked
Thanks in advance.
Any news?
https://forum.xda-developers.com/showpost.php?p=75522361&postcount=445
Maybe if I improve few steps and maybe if easier to do it...
Somebody could help to get PIT partition.pit from alive SM-R765F
Best Regards
Meanwhile we have for Software Revision 2:
Code:
AP_R765FXXU2CRA1_usr.tar.md5
BL_R765FXXU2CRA1_usr.tar.md5
CP_R765FXXU2CRA1_CL715189_QB8540185_SIGNED.tar.md5
CSC_OLB_R765FOLB2CRA1_usr.tar.md5
Code:
COMBINATION-FT30_R765FXXU2CRB1.tar.md5
and latest:
Code:
AP_R765FXXU2CRD2_usr.tar.md5
BL_R765FXXU2CRD2_usr.tar.md5
CP_R765FXXU2CRD2_CL806632_QB9592827_SIGNED.tar.md5
CSC_OLB_R765FOLB2CRD2_usr.tar.md5
Best Regards
so my model is sm-r775t and i flashed odin with the ap stock r770 with the hope that i can use samsung pay in my country,
after that my gear is stuck at odin mode with [system stt :custom and reativation on(even though i turned it off before flash odin)
is there anything i can do to fix it,will samsung service center accept to repair it or not ?
thanks for reading and sr for my bad eng
You need MANDATORY SM-R775T Firmware...
1.
Please check if you can go to Download Wireless...
https://forum.xda-developers.com/gear-s3/help/wireless-mode-enter-gear-s3-sm-r760-t3710855/page2
If NOT work... you need USB cable... like here:
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
2.
Make Photo from Odin Mode... and upload here.
3.
I have NO Firmware for SM-R775T for repair attempt...
I will try to find something...
Best Regards
@zitvi
Only as info:
https://forum.xda-developers.com/gear-s3/how-to/firmware-how-to-unbrick-gear-s3-t3761643
Valid Firmware package for ODIN is available for SM-R765T. :good:
Best Regards
Edit 1.
Sorry, my fault... SM-R775...
But it seems I have Combination Firmware found for SM-R775T... free download.
adfree said:
@zitvi
Only as info:
https://forum.xda-developers.com/gear-s3/how-to/firmware-how-to-unbrick-gear-s3-t3761643
Valid Firmware package for ODIN is available for SM-R765T. :good:
Best Regards
Edit 1.
Sorry, my fault... SM-R775...
But it seems I have Combination Firmware found for SM-R775T... free download.
Click to expand...
Click to collapse
adfree, may I ask you to find and upload netodin firmware for sm-r775t, plz?
@veligura
Code:
R775TUVU1BRH1/R775TTMB1BRH1/R775TUVU1BRH1
R775TUVU1BRD2/R775TTMB1BRD2/R775TUVU1BRD2
R775TUVU1AQI2/R775TTMB1AQI2/R775TUVU1AQI2
R775TUVU1BQL1/R775TTMB1BQL1/R775TUVU1BQL1
These are the official FOTA updates for SM-R775T...
I can not remember if I have found SM-R775T files yet...
You can PM me...
Best Regards
Edit 1.
Combination Firmware I have...
Code:
[up_vnROM.net]_COMBINATION-FTMA_R775TUVU1AQC3.tar.rar
Hi @adfree thank you for the combination file for R775T. I have been trying to remove the 'reactivation on' on a T-Mobile Classic R775T via the SDB kit you provided and enter the commands via*ansicon;
sdb connect 192.168.0.xxx
sdb root on
sdb push empty.bin /opt/usr/media/
sdb shell dd if=/opt/usr/media/empty.bin of /dev/mmcblk0p15
sdb shell reboot download
But the reactivation is still on. (Picture attached)
Currently running on R775TUVU1BQL1 firmware
I'm using your combination file posted above R_775TUVU1AC3
Any help would be appreciated.
@vivalalibertad
I hope you can read Private Mails... look into right upper corner..
Maybe this helps you...
IMHO I sent you 2 PMs...
Best Regards
Still stuck on reactivation lock
adfree said:
@vivalalibertad
I hope you can read Private Mails... look into right upper corner..
Maybe this helps you...
IMHO I sent you 2 PMs...
Best Regards
Click to expand...
Click to collapse
Hi @adfree,
I've followed the procedure and I'm stuck. After reboot to download it shows reactivation lock is ON.
Could you share the solution with me as well?
Best regards,
Ivan
My watch is completely stock and I have never done anything to it but I tried to turn it on today and it is stuck on the logo and doesn't go any further. I tried using recovery but that just gets stuck on the logo as well. I am able to get into (wifi) download mode so I am reaching out to you guys for help maybe I can flash something via odin net to get things working again I appreciate any help.
Here is some info I got from Odin mode:
Product name: SM-R770
Current Binary: Samsung official
System status: Official
Reactivation: OFF
Secure download: Enabled
Warranty void: 0 (0x0000)
AP SWERV: B:2 K:0 S:0
I have only CQK3 as """latest""" Tizen 3 Firmware for SM-R770...
https://www.file-upload.net/download-12979722/R770XXU2CQK3_OXA2CQK3.zip.html
netOdin and instruction you could find here... if you want:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Best Regards
adfree said:
I have only CQK3 as """latest""" Tizen 3 Firmware for SM-R770...
https://www.file-upload.net/download-12979722/R770XXU2CQK3_OXA2CQK3.zip.html
netOdin and instruction you could find here... if you want:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Best Regards
Click to expand...
Click to collapse
Thank you! I will check it out when I get home. Am I able to receive OTA updates with this firmware?
Sent from my [device_name] using XDA-Developers Legacy app
I have no Crystal Ball.
As "we" not know what happens to your device and why it stuck...
CQK3 is IMHO the only leaked Tizen 3 Firmware... for SM-R770.
If you successfully flash CQK3... I am sure we find solution to fix FOTA...
Alternate solution is buy Firmware.
Here for instance:
http://dl.pars-hamrah.com//index.php?file=/Samsung Flash Files/R Series/R770 Orginal Firmware
CQL1 for SM-R770...
But also SM-R770 is CRC3 the latest FOTA update...
Your decission.
Own risk!
Best Regards
That is weird, mine did the same thing yesterday. My phone kept saying "Gear S3 Plugin keeps closing" so I cleared data and cache. It disconnected the gear and the gear said rebooting. Then it got stuck on the boot screen. Mine is the SM-R760 instead of the SM-R770. All the other information is the same as the OP. Can someone let me know what version I should install on my watch, if it is different than the R770. It had just installed an over the air update the same day, so it is on whatever the most recent version is. As long as it is able to downgrade I don't mind going back to tizen 2.3 if that is what it takes to fix it, I just don't want to mess it up if it isn't able to downgrade. Thanks in advance.
@adfree , you are amazing!!!!!!!!!!!!!!!!! I just tried what you said and so far everything is looking great! I got the FOTA and I'm extremely happy Thank you thank you thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
PhillyD77 said:
@adfree , you are amazing!!!!!!!!!!!!!!!!! I just tried what you said and so far everything is looking great! I got the FOTA and I'm extremely happy Thank you thank you thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hopefully adfree is able to help me as well, so glad for you.
magic_man185 said:
Hopefully adfree is able to help me as well, so glad for you.
Click to expand...
Click to collapse
I hope so too best of luck!
Sent from my [device_name] using XDA-Developers Legacy app
@magic_man185
SM-R760 can update to CQL1... this is 1 version before latest CRC3...
netOdin for SM-R760 is same as SM-R770 and so on...
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
SM-R760 CQL1 Tizen 3 can be found here:
https://forum.xda-developers.com/gear-s3/development/rom-samsung-gear-s3-sm-r760-t3755374
Best Regards
adfree said:
@magic_man185
SM-R760 can update to CQL1... this is 1 version before latest CRC3...
netOdin for SM-R760 is same as SM-R770 and so on...
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
SM-R760 CQL1 Tizen 3 can be found here:
https://forum.xda-developers.com/gear-s3/development/rom-samsung-gear-s3-sm-r760-t3755374
Best Regards
Click to expand...
Click to collapse
@adfree Thank you for your help. I had seen that forum page with the CQL1, but I wasn't sure if I could downgrade from CRC3 to CQL1. I have a US version Gear S3, but the firmware says Europe. Can I still use this file, and if so do I need to do anything special? I have watched the youtube videos and it never mentions the .pit file, should I use the .pit file when imaging? Thanks again!
All CSC/Sales Code are inside 1 package...
So this Firmware is also for US Sales Code XAR... SM-R760 Frontier.
!!!
Please do only this what you see in Videos...
Select AP in AP, BL in BL, CSC in CSC...
You have only to """sort""" select 3 files...
Three files
I'll repeat:
3
NOT change any Settings in netOdin...
NOt add PIT
Btw...
PIT is allready inside CSC...
I'll repeat... summary:
3 files
Best Regards
@adfree I don't blame you for making it extremely clear, the last thing I want to do is mess up my watch. I appreciate it. I flashed it this morning and it failed for some reason the first time. I was worried it messed something up, but I put in a more reliable wireless adapter and tried again, and passed!!! Thank you so much for your help. My watch is still under warranty, but I am overseas so it would have taken months to send in for repair probably. It updated to CRC3 almost immediately and it is completely functional again. Thank you so much for your help!