Database Info

ill pay someone to help me!!!!

Im getting the nfc service has stopped message non stop when at the play store. It takes me 20 mins to download 1 app. Also im getting the com.android.phone message when trying to get into mobile network which i cant get into and need to before i go overseas on jan 2nd. Everything else works fine, google wallet, touchwiz was giving me a problem but a factory reset fixed that but not the other 2 issues. I dont know what rom im using or anything like that but i have the files or the thread if you need more 411. So if you can fix this i will pay you via paypal. im available for skype video chat if you need to see the phone and whats going on with it. please help!!!!!!!!

Have you tried wiping davlik, resetting permissions, or just simply finding those apps and wiping their data?
Sent from an Apple killing JellyBean

moparfreak426 said:
Have you tried wiping davlik, resetting permissions, or just simply finding those apps and wiping their data?
Sent from an Apple killing JellyBean
Click to expand...
Click to collapse
ive wiped davlik and fixed permissions a bunch of times as well as wiped battery stats, clearing google wallet and did a factory reset.
i just noticed that the nfc thing pops up also when i use my camera and go into my gallery

Try using the full wipe version in this Thread: http://forum.xda-developers.com/showthread.php?t=1984436.

BigErnM said:
Try using the full wipe version in this Thread: http://forum.xda-developers.com/showthread.php?t=1984436.
Click to expand...
Click to collapse
ive tried the non wipe of that thread, but i need some what dummy instructions to complete this, like i said im a noob

Download ODIN here: http://d-h.st/UO0. It sounds like you may have already done this. Extract it to your desktop. I'm assuming you have already installed the Samsung Drivers here:http://www.samsung.com/us/support/owners/product/SCH-I535MBBVZW. Install those if you haven't already. Download this file from the thread: http://www.androidfilehost.com/?fid=9390214368362234355. Extract it to your desktop. Turn off your phone. Open Odin307 folder on your desktop and run Odin3 v3.07.exe. Put the phone into download mode by following second step in the thread: Put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer.
once in odin click the PDA field and select the root66_VZW_I535VRBLK3.tar.md5 you downloaded.
Leave Auto Reboot and F. Reset Time checked.
click start and
when done let phone reboot.

BigErnM said:
Download ODIN here: http://d-h.st/UO0. It sounds like you may have already done this. Extract it to your desktop. I'm assuming you have already installed the Samsung Drivers here:http://www.samsung.com/us/support/owners/product/SCH-I535MBBVZW. Install those if you haven't already. Download this file from the thread: http://www.androidfilehost.com/?fid=9390214368362234355. Extract it to your desktop. Turn off your phone. Open Odin307 folder on your desktop and run Odin3 v3.07.exe. Put the phone into download mode by following second step in the thread: Put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer.
once in odin click the PDA field and select the root66_VZW_I535VRBLK1.tar.md5 you downloaded.
Leave Auto Reboot and F. Reset Time checked.
click start and
when done let phone reboot.
Click to expand...
Click to collapse
ok so i have odin i have the drivers and downloaded the root66 file both the non wipe and wipe versions and both dont allow me to put it in pda, i get a warning msg basically saying where the file is located followed by the name of the file and then special characters that look like boxes. thats where im stuck with this process.

Do you have 7-zip or WinRAR installed? You have to extract the file out of the root66_VZW_I535VRBLK3.7z that you downloaded. The file you need to put in the PDA section in odin will be called root66_VZW_I535VRBLK3.tar.md5. That is the wipe version that I would recommend you use. The no-wipe verson file to use in odin in the PDA section is called root66_VZW_I535VRBLK3_nowipe.tar.md5.

BigErnM said:
Do you have 7-zip or WinRAR installed? You have to extract the file out of the root66_VZW_I535VRBLK3.7z that you downloaded.
Click to expand...
Click to collapse
i extracted it in my mac using stuff it, im running windows xp on virtual machine
my skype username is jonathan.ofri if you or anybody else wants to make a quick $20, id rather do it through there then the forums, ive been working on this for about 14 hours now, im exhausted!!!!!!

Good luck to you. I've done all I can. If you are still stuck use the factory images in section 5 of this guide to go completely back to stock: http://forum.xda-developers.com/showthread.php?t=1762709.

BigErnM said:
Good luck to you. I've done all I can. If you are still stuck use the factory images in section 5 of this guide to go completely back to stock: http://forum.xda-developers.com/showthread.php?t=1762709.
Click to expand...
Click to collapse
i appreciate the effort, thanks

Could be a possible hardware failure? Nfc gone bad?
Sent from an Apple killing JellyBean

FingerBlastJ said:
i appreciate the effort, thanks
Click to expand...
Click to collapse
Reflash none-wipe root66 is the right approach, you need to download and installed 7zip to your xp. Use 7zip to unzip your root66zip file, then use Odin to flash. Seems like the file is corruppted that's why Odin is not seeing the file name. Once you get this file name issue fixed, you should able to flash the zip.

nfc still works, i got nfc tags everywhere and tested them and are 100% operational.
as for the root file, i downloaded winrar onto xp to unzip the file, there are 10-15 files in it, i dont know which 1 to tack onto pda. what is 7zip? is that an extractor?

7zip is best extractor for. zips...
Sent from an Apple killing JellyBean

Double click the root66_VZW_I535VRBLK3.7z which should open it in WinRAR. If that doesn't do it open WinRAR and then select that file. There should only be one file inside to extract named: root66_VZW_I535VRBLK3.tar.md5. That is the one to use in the PDA section of odin. If WinRAR won't do it (it works fine for me), install 7-zip and extract it with that.

Verizon Firmware needed....

Does anyone know where I can download Note Edge Firmware for the Verzion Note Edge?

Credit goes to Larryp1962
For those of you who wants the firmware for any samsung device follow the steps below. I've tested it and it works every time
HOW TO EXTRACT FACTORY FIRMWARE WITH KIES (For Return To stock .tar.md5 For Use In Odin)
This is a guide for extracting the factory firmware for your samsung device using Kies Upgrade.
You may ask , I don't have a firmware upgrade.... (5.) Just follow the guide
1. Make sure your phone is plugged in...
2. Open this folder: OS C: / Users / Your name / AppData / Local / Temp
3. Your user profile’s temporary folder will open. Keep it opened, as we’re going to need to copy a file from this location in a little while.
4. Launch Kies and wait for the phone to connect.
5. You’ll see an offer to upgrade firmware of your phone – click on the firmware upgrade button. If no Upgrade click on Tool's / Firmware Upgrade and Initialisation or Firmware Upgrade setting's.
6. A few windows will pop up with questions about backup, etc – answer the questions, making sure to do a backup, and let it proceed. A window will pop up saying “preparing files”, and then a window will pop up again, showing the download progress.
7 Pay attention to the download progress. When it reaches 100%, your phone will enter “Downloading Mode” and begin flashing. YOU MUST FOLLOW THE NEXT STEP AS SOON AS THE FLASH STARTS.
8. During the flash procedure, go to your Temporary folder and refresh its contents. You will see a file called tmpXXXX.tmp (the XXXX’s will be random numbers). This .tmp file is the encrypted ROM archive – ignore it, and look for a new folder created with a similar name (or else sort by date and find the newest folder), and open that instead. Inside you will see a .tar file. Right-click on that file, choose copy and paste it to desktop Don’t try to move the file (using “cut”, or dragging the icon to your desktop) – just copy & paste.
9. Your phone should complete the flash successfully.
You need to copy the firmware file from your temporary folder within the period that your phone is being flashed, as it gets deleted immediately after flashing is complete. I would estimate that you have around 2 – 3 minutes to complete step 8. so you just need to be paying attention when the flash begins.

does this method still work? if so dude u rock!! idk how to say TY enough!!!

[official][stock] sm-g360v

DISCLAIMER: Since this is a third-party supplied file, flashing this file places any and all outcomes on YOU, the flasher (get your mind out of the gutter, thanks.) This file, though supplied by Samsung Kies 3, may cause issues or have undesirable effects. What these effects are, I have no clue. If you have a custom recovery, it will be overwritten with the stock recovery. Again, if you use this, you are the one responsible for any negative outcome.
​This the official stock ROM flashable via Odin. This took me a few hours to download several times and locate the temp directory that housed it. It is a 2.12 gig tar.md5 file. Since Samsung does not have an open source copy for us to download, I used Kies 3 to download it.
FLASHING INSTRUCTIONS:
Using the most recent Odin, put the file in the AP section and flash it.
Link

Thank you so much it fixed my bricked device!

Thank you so much - Accidentally upgraded firmware and lost root and could not re-root. Worked like a charm and used kingroot to gain root again. You rock!

It downloads as a .RAR file if converted to .TAR, ODIN can not load it. How can the .rar file be used by ODIN?

bunivers said:
It downloads as a .RAR file if converted to .TAR, ODIN can not load it. How can the .rar file be used by ODIN?
Click to expand...
Click to collapse
The flashable .Tar file that you will use to restore your device via Odin, is located inside the .RAR provided in the download link. Once the .RAR file has been unrared/unzipped using 7zip, you will have your restore .Tar file that you're referring to. If you need to, you can Google 7zip and download it. The program is free and open-source, and it supports .RAR .TAR .ZIP etc. Happy Restore!

@jaywillsoul Please add to the OP that this firmware will wipe the device.
Thanks again for the firmware!
Sent from my XT1528 using XDA Labs

I was able to un-brick my wife's Verizon Core Prime with this. Thank you for your time and effort, @jaywillsoul.
Donation sent.

Fail
I downloaded the firmware, began to flash and Odin wrote "FAIL", and the screen after turning on is "Software update failed. Your device didnt update successfully. Use the Verizon Software Repair Assistant on a computer to repare your device and complete the update." But the Verizon Software Repair Assistant after this can not find the phone.

Thank you for this wonderful gift to the underdeveloped Core Prime! :good: worked for me and I was able to root afterwards!

is that process unlock the sim card lock for Verizon

ty it work's. I can root now

Sorry to bump this thread, but will updating through recovery mode end up wiping all the data of the phone? (like pictures, and files)
I was dumb and didn't enable usb debugging before my phone got soft bricked, now it freezes on the carrier animation
My phone is a model SM-G360T1

Link999123 said:
Sorry to bump this thread, but will updating through recovery mode end up wiping all the data of the phone? (like pictures, and files)
I was dumb and didn't enable usb debugging before my phone got soft bricked, now it freezes on the carrier animation
My phone is a model SM-G360T1
Click to expand...
Click to collapse
You have the wrong model - this guide is for the G360V, not the G360T1. Sorry.

[FIX] Get latest Android 7.0 release without locking the bootloader

Hi,
Since the 20170425 release of Android 7.0 tends to lock the bootloader on this phone, I thought it would be interesting to share the files that can boot it without locking your bootloader.
The preloader and lk are from previous release of Android 7.0.
Instructions:
Download this ROM: https://www.needrom.com/download/doogee-y6-7-0-2/
Download the fix: https://mega.nz/#!9MMzyZpC!W2mkaAEKxrYL0uWVnNXxS8ao31AShoAgxNBFIJhD438
Extract both files with WinRAR or 7zip
Go to the extracted ROM folder and delete these files: preloader_hct6750_66_n.bin , lk.bin
Copy everything from the extracted DOOGEE-Y6_Nougat-FW folder.
Paste them in the extracted ROM folder and replace the existing ones! Make sure that you replaced the existing files!
Open SP Flash Tools and load the scatter file.
Choose "Firmware upgrade" and click "Download".
Power off your phone
Connect it to the phone with USB cable.
Flashing process will start.
Wait till the end. You'll see a big green button saying "OK".
Disconnect your phone power it on.
Done.
Click to expand...
Click to collapse

Big thank you for the fix... BUT
Much appreciate the hard work you have done on this nice phone, kudos
BUT yeah there is always one eh
You accidentally left out the remark to delete the "ik-verified.bin" file, which must be deleted as per your post on needrom.
Hope you don't mind I put that in a comment on here.
ANYHOO Thanks a bundle again (I wish I was a rich man, then I would donate you a bundle)

Guide me to flash Android Pie

Hi Guys,
Someone please guide me to flash Android Pie on my G8142. I have already downloaded G8142_Customized VN_1309-2181_47.2.A.0.306_R3C firmware via XperiFirm.
Note -
Locked BL
Currently on 47.1.A.16.20
Thanks in advanced.

Hi, frankly speaking, as your BL is blocked you should/can wait only some few days, it should come over the air very soon

Hi, I also have a locked bootloader, and its still locked after flashing the update using newflasher
all I did was download the VN firmware from xpericheck app that is integrated in flashtool application.
then I downloaded newflasher and it was a zip file, I extracted it, copied all files in it and pasted them in the same folder where the firmware files at, then ran newflasher, and thats it
I have Pie.

Did you delete any of the .TA files prior to flashing?

Hi @madshark2009,
can you provide me any guidelines to do it. I'm new to Sony.

@kw0n2k
No,all I did was simply flash using newflasher
@werty733
here is how i did it:
download xperifirm application:
https://softfamous.com/xperifirm-tool/
when you launch it, select Xperia XZ Premium (the dual one)
then you will get a bunch of fimrwares for different regions, simply select the VN region and it should show on the far right "latest update available" with a number of 47.2.A.0.306
download that to an empty folder of your choice
after download completed, download newflasher from here
https://forum.xda-developers.com/crossdevice-dev/sony/progress-newflasher-xperia-command-line-t3619426
download v13, you will get a ZIP file, copy all files in the file to the same folder where you downloaded the firmware files.
then simply run newflasher from that folder, press n for the first option, and another n for the second option, then it should start doing the magic, after its done, youre set. hope that helped

@madshark2009 thanks, will try your method and update.

@madshark2009 sorry I meant, the new firmware files that you downloaded with xpirifirm, the .TA files in that. correct me if im wrong, but i thought you had to delete them prior to flashing as it might over ride your DRM keys.

@kw0n2k
I dont think so, because i checked my keys stats and they are all ok, no one answered me that officially so i cant give you a concrete answer but i dont think flashing an update resets your drm, we all have been doing it before, i have done it before on oreo and nougat so yah, but get a more officially approved answer from a dev here better for you not to do anything that could harm your device on my word alone
Cheers mate

@madshark2009 Yeah, I converted my G8142 to G8141 cause I couldnt get VolTE in Australia. From what i read, i was under the assumption that .TA files had to be deleted on the new firmware prior to flashing as to not lose your DRM keys. But if you've done it and everything's fine, happy days! I'll just flash normally without deleting any files from now on.

the good @munjeni have exclu .ta in the script no problem for flash with any problem

@madshark2009, it worked perfectly without any issues. but I'm very disappointed there is no Gestures.