So for the past week, my phone has been bricked. Bricked by flashing the wrong firmware, so now not able to access the whole phone, and making matters worse by flashing the wrong recovery for the phone. The phone being an Honor 8, FRD-L14, 64GB.
I'm not able to use dload to rollback anything, or use that option at all, since the recovery isn't eRecovery, and doesn't even have any recovery in itself.
The problem is that I'm able to boot into "download mode" my phones unlocked, and when I type in "fastboot oem get-bootinfo", the response is:
(bootloader) unlocked
OKAY [ 0.008s]
finished. total time: 0.010s
But when trying to flash anything through fastboot in the cmd, like the command "fastboot flash recovery recovery.img" to flash a recovery on the phone, the response would then be:
target reported max download size of 471859200 bytes
sending 'recovery' (29378 KB)...
OKAY [ 0.803s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.814s
My phone is unlocked, and on the download mode screen, is shows:
PHONE Unlocked
FRP Unlock
My drivers are installed, as well as the device being shown in fastboot when typing in the command "fastboot devices"
I haven't been able to do a single thing to the phone, and have searched up a countless amount of hours to find the fix for the phone, if anyone can, please look into the problem and assist me, thanks .
Kc4k12 said:
So for the past week, my phone has been bricked. Bricked by flashing the wrong firmware, so now not able to access the whole phone, and making matters worse by flashing the wrong recovery for the phone. The phone being an Honor 8, FRD-L14, 64GB.
I'm not able to use dload to rollback anything, or use that option at all, since the recovery isn't eRecovery, and doesn't even have any recovery in itself.
The problem is that I'm able to boot into "download mode" my phones unlocked, and when I type in "fastboot oem get-bootinfo", the response is:
(bootloader) unlocked
OKAY [ 0.008s]
finished. total time: 0.010s
But when trying to flash anything through fastboot in the cmd, like the command "fastboot flash recovery recovery.img" to flash a recovery on the phone, the response would then be:
target reported max download size of 471859200 bytes
sending 'recovery' (29378 KB)...
OKAY [ 0.803s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.814s
My phone is unlocked, and on the download mode screen, is shows:
PHONE Unlocked
FRP Unlock
My drivers are installed, as well as the device being shown in fastboot when typing in the command "fastboot devices"
I haven't been able to do a single thing to the phone, and have searched up a countless amount of hours to find the fix for the phone, if anyone can, please look into the problem and assist me, thanks .
Click to expand...
Click to collapse
You're in a tough situation my friend, what do you get when you try the dload method? In my opinion this is the only thing you can do. However i heard about a thing called "DC Unlocker" . It can flash a clean ROM and other good stuff for bricked Huawei phones, but you have to pay, and i don't know what the prices are. Hope you'll make it
Related
Hi,
after having TWRP, the factory reset function won't work since the data partition isn't recognized yet. Does anyone have the stock recovery version for this?
i already tried downloading from http://huaweidevices.ru/huaweiserviceworkarchivehuawei/eva-l19/recovery.img but it fails with the below message:
fastboot.exe flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (35180 KB)...
OKAY [ 1.318s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 1.318s
edit: found out the issue was related to the allow OEM unlock as turned off
is your bootloader still unlocked?
4Fighting said:
is your bootloader still unlocked?
Click to expand...
Click to collapse
Yups, still unlocked bootloader and currently on twrp recovery, but will need stock recovery if any operations like upgrade or factory reset needs to be done.
So I've pretty much hit a wall. I have unlocked bootoader, and everytime I try to enter into factory resetting via volume + power button, it'll boot into "your device is booting now..." and it'll stay there. Same thing if I try to do it via the settings.
Whenever I try to install custom recovery or anything, I get this message.
C:\adb>fastboot flash recovery TWRP-CN.img
target reported max download size of 471859200 bytes
sending 'recovery' (29218 KB)...
OKAY [ 0.789s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.804s
I've tried all sorts of twrp files. My phone has locked me out of changing anything from adb commands it seems. How do I fix this?
My FRP is also locked, if that matters. I've tried to delete all accounts from my phone, as well as the "find my phone" option.
I'm on Anroid 7, EMUI 5.
C:\Users\amira\AppData\Local\Android\sdk\platform-tools>adb reboot bootloader
C:\Users\amira\AppData\Local\Android\sdk\platform-tools>fastboot devices
73QDU16B22001173 fastboot
C:\Users\amira\AppData\Local\Android\sdk\platform-tools>fastboot format userdata
FAILED (remote: Command not allowed)
C:\Users\amira\AppData\Local\Android\sdk\platform-tools>fastboot format cache
FAILED (remote: Command not allowed)
OEM is greyed out in the developer settings, I can't activate it or decative.
Try the unlock command again for the bootloader. This worked for me even when it was unlocked before
TomboIa said:
Try the unlock command again for the bootloader. This worked for me even when it was unlocked before
Click to expand...
Click to collapse
C:\Users\amira\AppData\Local\Android\sdk\platform-tools>fastboot oem unlock 1031871703372236
...
FAILED (remote: Command not allowed)
finished. total time: 0.020s
Same thing. It doesn't allow me.
Zebieok said:
C:\Users\amira\AppData\Local\Android\sdk\platform-tools>fastboot oem unlock 1031871703372236
...
FAILED (remote: Command not allowed)
finished. total time: 0.020s
Same thing. It doesn't allow me.
Click to expand...
Click to collapse
Dont share your unlock key here, and are you sure that was your bootloader unlock keys.
Frp lock means your bootloader is locked.
FRP lock is a security action, for remove them you must boot a device and remove all google accounts.
Unfortunately this casw happened to me, when i want factory reset my phone, his dead and i cant boot it again just fastboot work but FRP LOCK activate and i cant flash any thing, give error command not allowed, in last i have to go to repair services, and they do this with hard box (maybe chimera or sigma.. Or other).
If you can boot your device you can do any thing, but if your device get bootloop go to services center.
Hi,
I recently want to root my Honor 8 FRD-L09 on N 7.0.
So i unlock the bootloader, and flash the recovery.
But i never could do it, I always got an error with fastboot
C:\Users\Hugo\Desktop\adb>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (65536 KB)...
OKAY [ 1.386s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 1.392s
I don't know what to do.
are you sure you dont have FRP lock activated?
well thats why it wont flash. BL unlocked means nothing if you're FRP locked. you have 2 choices. try removing all security options and accounts / factory reset and hope FRP lock is removed, or use dload method to reflash stock rom. you wont be able to flash twrp otherwise, well, unless u use some of those "pay to remove FRP lock" tools
hypnotik8systeme said:
are you sure you dont have FRP lock activated?
well thats why it wont flash. BL unlocked means nothing if you're FRP locked. you have 2 choices. try removing all security options and accounts / factory reset and hope FRP lock is removed, or use dload method to reflash stock rom. you wont be able to flash twrp otherwise, well, unless u use some of those "pay to remove FRP lock" tools
Click to expand...
Click to collapse
Yes i got frp lock i will try To see tomorrow
ImEraaz said:
Yes i got frp lock i will try To see tomorrow
Click to expand...
Click to collapse
Did it work? If, can you tell me how you did it?
ImEraaz said:
Hi,
I recently want to root my Honor 8 FRD-L09 on N 7.0.
So i unlock the bootloader, and flash the recovery.
But i never could do it, I always got an error with fastboot
C:\Users\Hugo\Desktop\adb>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (65536 KB)...
OKAY [ 1.386s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 1.392s
I don't know what to do.
Click to expand...
Click to collapse
FRP lock and system security triggers in bootloader itself cause that some partition/blocks are unaccessible even when there is a "full" unlocked bootloader, but full unlocked bootloader option is not as it should be.
Security options while flashing some partition and the system flashing boot loops security option enables this well known security feature.
ImEraaz said:
Hi,
I recently want to root my Honor 8 FRD-L09 on N 7.0.
So i unlock the bootloader, and flash the recovery.
But i never could do it, I always got an error with fastboot
C:\Users\Hugo\Desktop\adb>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (65536 KB)...
OKAY [ 1.386s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 1.392s
I don't know what to do.
Click to expand...
Click to collapse
Enable OEM unlock.... In developer setting
Hello, first i must say sorry for bad english.
i bought this phone from one guy from work. He just told me: Just Huawei logo showing. But what he did with it he dont said. Well come to problem.
When i go to Fastboot. it showing in green colour - Phone: LOCKED , FRP: LOCK. From this i know i must unlock bootloader first. BUT i cant do nothing. I downloaded DC unlocker and charge 4 points for read Bootloader Unlock code. But i have to connect phone like COM 1.0 .. and that is what i cant. there is no recovery. nothing. tried update with SDcard with UPDATE.APP from dload but nothing happen. So i tried flash manualy with Fastboot flash recovery.img .. boot.img .. and it say
C:\adb>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (35604 KB)...
OKAY [ 0.993s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 1.012s
everyting what i trying to flash it giving same error. FAILED (remote: Command not allowed).
I dont know what else i can try to unlock bootloader. I know i must somehow first unlock booloader but i dont know how when phone reacting to pc just in fastboot mode. installed HiSuite for drivers. Hope can somebody here help me.
So another method.. Can somebody here tell me how unbrick Hard bricked p8 lite 2017? I readed a lot of pages about this problem. And it telling me the my phone are Hard bricked. Is here some way to unbrick?
Hello guys !
I know there is like 88 thousand threads on this kind of problem, but bellieve me i've read them all and none of them worked !
I have a serious problem, it's been a week now since i'm looking for a solution, looking at hundreds of guide and threads and different websites... still no results !
I have a Huawei P8 Lite 2017. That i wanna root using the magisk and twrp method (from Pokémon GO Spoofing ; [Android] All the working Android methods 2020) on reddit
I have my phone Unlocked
FRP unlocked
OEM enabled
USB deboging enable
Automatic system update disabled
This is what my bootloader screen says
"Phone Unlocked"
"FRP Unlocked"
i have managed to flash my phone with my twrp.img
C:\adb>fastboot flash recovery_ramdisk twrp.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (26226 KB)...
OKAY [ 1.003s]
writing 'recovery_ramdisk'...
OKAY [ 0.348s]
finished. total time: 1.366s
Click to expand...
Click to collapse
But impossible to access the recovery ! always says "command not allowed"
C:\adb>fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 1.056s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 1.072s
Click to expand...
Click to collapse
(I have the exact same problem using the commands from the platform tool folder, and my adb drivers are updated (via ADBDriverInstaller)
I've downloaded this TWRP ; twrp-3.1.1-0-grace.img (for huawei P8) (Note that version twrp-3.1.0-0 and twrp-3.0.2-0 do not work either)
I have already tried to access the recovery screen manually right after the flash (using vol Up + Power button on huawei) and i got this error
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
I have N.O idea where is the problem !
If you can please help a man in need ^^
Thank you guys !
Anyone ?