Database Info

[ROM][Official][Weekly] LineageOS 14.1 for OnePlus 3/3T

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for official LineageOS 14.1 builds for OnePlus 3/3T. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Known bugs:
Front camera is buggy, due to the buggy camera HAL Fixed by OnePlus
Installation:
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (See #2 for details)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm64)
Reboot
Source code:
https://github.com/lineageos
Credits:
LineageOS Team & Contributors
Code Aurora Forum
......
Download:
https://download.lineageos.org/oneplus3
XDA:DevDB Information
LineageOS, ROM for the OnePlus 3
Contributors
dianlujitao, Grarak
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
Version Information
Status: Nightly
Created 2016-11-09
Last Updated 2017-03-27

Release note:
New builds (after 2017/1/15) uses F2FS backported from 4.10 kernel, you may meet compatibility problems such as deadlocks, if you do, flash TWRP provided in OP and choose "Wipe -> Format Data" to format(not just wipe) your /data partition, this will clean the entire /data partition, including the emulated sdcard, so don't forget to backup your data before. After that, your data partition will be formatted into ext4, if you want to keep using f2fs, just convert fs type normally in TWRP.
[*]For oneplus3, my unofficial TWRP is recommended, as it's what I use. For 3T, TWRP 3.0.4 is recommended.
As of 2017/6/17, official TWRP for OnePlus 3(https://dl.twrp.me/oneplus3/) is updated with latest LineageOS kernel and OxygenOS decryption stuff, it builds against Omni 7.1.2 and supports both op3&3t, now it's the recommended recovery.
20170120 build includes sdcardfs, security fixes and camera fixes&improvements, touch to focus is fixed as well, if it's still not working, clean Snap's data. BTW N kernel source is released now, I'll take days to bring up, don't ask for ETA.
Regarding installation, we recommend that users wipe when switching to LineageOS, and reinstall their gapps. However, we recognize that this can be time consuming, so we are offering an EXPERIMENTAL (read as, if it fails, you’ll have to wipe anyways) solution. Visit http://lineageos.org/Update-and-Build-Prep/for more details
Started from lineage-14.1-20170207-nightly-oneplus3-signed.zip, we provide unified builds for both 3&3T, and you need to install certain firmware to pass the TrustZone assertion. Currently they're the OxygenOS Open Beta 19/11 ones. As oneplus won't update them every time new OTAs are rolling out, firmware from other versions might also pass the assertion.
FAQs:
My status bar quick pulldown and notification slider are broken, why?
See https://github.com/opengapps/opengapps/wiki/Notes-for-CMSetupWizard
Why the builds are unified?
Tell me the difference between OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883 and OnePlus3TOxygen_28_OTA_039_all_1701140132_de9036f11e2246a8, why not?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Latest Firmware files for oneplus3/oneplus3t -5.7.2017-
Make a nandroid backup before you proceed
Flash the following files using the latest official twrp to avoid any recovery related issues.
Make sure to do a clean flash if your rom requires an updated firmware.
Don't ever flash an oneplus3 firmware on oneplus3t or an oneplus3t firmware on oneplus3.
Oneplus3
Instructions only for oneplus3!
1-clean flash is recommended.
2-Falsh OnePlus3_OpenBeta19-FIRMWARE+MODEM-flashable.zip.
3-Flash the latest laos nightly.
4-optional: gapps arm64 7.1 and -su-addon arm64, this enables inbuild laos root.
5-Wipe Dalvik/cache and reboot.
Oneplus3t
Instructions only for oneplus3t!
1-clean flash is recommended.
2-Flash OnePlus3T_Beta10-(4-7-17)-FIRMWARE-flashable.zip.
3-Flash the latest laos nightly
4-optional: gapps arm64 7.1 and -su-addon arm64, this enables inbuild laos root.
5-Wipe Dalvik/cache and reboot.
For people who rather use the oxygenos camera:
Get OnePlusCameraV8-siankatabg.apk and OnePlusGallery-V8-siankatabg.apk
If you have problems after flashing any custom kernels please provide a log in the thread where you got the kernel from and not here!
Credits:
@nvertigo67 @djsubterrain @Eliminater @kamilmirza op3t firmware
@jamal2367 op3 firmware
@siankatabg oos camera/gallery port

Maybe let a CM member start the official thread?

@dianlujitao : Thanks for maintaining this.
Currently call audio is broken by sound trigger commit.
Even when that revert, noise cancellation not working / echo happens while in calls.
please fix this only issue.

RohanAJoshi said:
@dianlujitao : Thanks for maintaining this.
Currently call audio is broken by sound trigger commit.
Even when that revert, noise cancellation not working / echo happens while in calls.
please fix this only issue.
Click to expand...
Click to collapse
Steve is investigating on that

dianlujitao said:
Steve is investigating on that
Click to expand...
Click to collapse
That's great, waiting for noise cancellation fix.

I have a custom TWRP from the OOS 3.5.5 (OnePlus thread),
twrp-3.0.2-22-oneplus3.img
I think only that is working correctly with CM 14.1 Official ROM ?

osr.arora said:
I have a custom TWRP from the OOS 3.5.5 (OnePlus thread),
twrp-3.0.2-22-oneplus3.img
I think only that is working correctly with CM 14.1 Official ROM ?
Click to expand...
Click to collapse
Yes, 3.0.2.19 & 3.0.2.22 should work with every rom.
So use always this twrp versions to get sure.
dianlujitao said:
Steve is investigating on that
Click to expand...
Click to collapse
Finally someone official is here
Thank you very much!!!
Can you just tell me,
Is that included baseband/firmware inside the rom, 3.5.5 or 3.2.7 or mixed or sth else?
Thanks
Cheers

Is possible flash 14.1nightly on experimental? I have from 2 weeks

alteus83 said:
Is possible flash 14.1nightly on experimental? I have from 2 weeks
Click to expand...
Click to collapse
It is possible, but you can get some unexpected bugs...
Better to do a clean start, with full wipe.
And dirty flash upcoming nightlys.
Cheers

When i plug my Phone into the charger or my pc the charging icon wont show up (lighting bolt in the battery)
After install i tried a cache/dalvik clear, did not help
The Phone is connected to the computer, it says charging..
https://postimg.org/image/xj8af43tf/

yooouuri said:
When i plug my Phone into the charger or my pc the charging icon wont show up (lighting bolt in the battery)
After install i tried a cache/dalvik clear, did not help
The Phone is connected to the computer, it says charging..
https://postimg.org/image/xj8af43tf/
Click to expand...
Click to collapse
known issue with cm14.1

yooouuri said:
When i plug my Phone into the charger or my pc the charging icon wont show up (lighting bolt in the battery)
After install i tried a cache/dalvik clear, did not help
The Phone is connected to the computer, it says charging..
https://postimg.org/image/xj8af43tf/
Click to expand...
Click to collapse
This is known... There are some problems with battery icon and battery stats too...
@dianlujitao
OP need to add that bugs into to the bug list:
1. Echo (loudspeaker) noise calcellation
2. Battery stats reset + charging text + charging icon
3. GPS problems especially while driving. (you get a perfect gps fix but if you move fast "drive" you get wrong coordinates)
4. All bugs related to legacy HAL1
5. Srgb colors not working
Cheers

Ramalama said:
This is known... There are some problems with battery icon and battery stats too...
OP need to add that bugs into to the bug list:
1. Echo (loudspeaker) noise calcellation
2. Battery stats reset + charging text + charging icon
3. GPS problems especially while driving. (you get a perfect gps fix but if you move fast "drive" you get wrong coordinates)
4. All bugs related to legacy HAL1
Cheers
Click to expand...
Click to collapse
Agree! :good:

Ramalama said:
This is known... There are some problems with battery icon and battery stats too...
@dianlujitao
OP need to add that bugs into to the bug list:
1. Echo (loudspeaker) noise calcellation
2. Battery stats reset + charging text + charging icon
3. GPS problems especially while driving. (you get a perfect gps fix but if you move fast "drive" you get wrong coordinates)
4. All bugs related to legacy HAL1
Cheers
Click to expand...
Click to collapse
You guys may need to wait because cm14.1 is still highly experimental

So its waiting for OP to release some of their HAL?

Ramalama said:
This is known... There are some problems with battery icon and battery stats too...
@dianlujitao
OP need to add that bugs into to the bug list:
1. Echo (loudspeaker) noise calcellation
2. Battery stats reset + charging text + charging icon
3. GPS problems especially while driving. (you get a perfect gps fix but if you move fast "drive" you get wrong coordinates)
4. All bugs related to legacy HAL1
Cheers
Click to expand...
Click to collapse
Add on
5. In call volume slider not working in speaker or headset mode.

dianlujitao said:
You guys may need to wait because cm14.1 is still highly experimental
Click to expand...
Click to collapse
You have right, but that's the actual bug list that users know what's not working atm
I don't think that next few builds will not be highly experimental
yooouuri said:
So its waiting for OP to release some of their HAL?
Click to expand...
Click to collapse
Yes, till they release nougat.
mgear356 said:
Add on
5. In call volume slider not working in speaker or headset mode.
Click to expand...
Click to collapse
I know, but this bug is only since yesterday, there is a commit that broke it... I think it will be fixed on next 1-2 builds...
Cheers

I would appreciate if op could add link to supported twrp in the first post.. It would be really helpful..

[ROM] [ 8.1.0 ] Official madOS - Vernee Apollo Lite & X [MT6797]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Official Build of madOS ( based on AOSP 8.1.0 ) for Vernee Apollo Lite & X with MTK 6797 SoC
madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
The latest 7.1.2 build must be flashed in SPFT with firmware upgrade mode before this ROM can be flashed (Downloads: VAL, VAX)
Download ROM from M.A.D. Facebook
OR from xda DevDB
Download 8.1 GApps from xda devdb (Mirror)
Backup
Flash new mandatory new Oreo TWRP (available on downloads)
Boot to the new TWRP recovery
full Wipes (dont come crying if you didn't .. ;p )
Install rom (optionally following by GAPPS if you use them)
Optional: go to: wipe --> Advanced Wipe, tick 'cache' and klick 'repair or change File System' --> change File System --> F2FS --> swipe to the right (hit back several times, and proceed the same way with 'data').
Reboot System
Working:
RIL (Calls /SMS, Data connection, etc)
Wifi
Bluetooth
FM Radio
All Sensors
Fingerprint
Lights
Both storages & MTP
HW de/encoding
Camera (photos and video)
GPS & aGPS
Audio
madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)
Bugs:
-
XDA:DevDB Information
madOS_O_VAL_VAX, ROM for all devices (see above for details)
Contributors
fire855, DerTeufel1980, superdragonpt
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2017-12-25
Created 2017-12-25
Last Updated 2018-01-13

General F.A.Q.
Q: What the hell is madOS ?
A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.
Q: Which recovery should I use for this ROM?
A: Latest M.A.D. TWRP 3.2.1-0 recovery
--> Check xda Download Section
Q: How do i flash new recovery ?
A:
1: You can flash it with a scatter file (LP rom layout)
2: You can simply flash it from the existing twrp recovery: Install> Install image> Select Oreo TWRP> Select "Recovery" as partition to flash.
Reboot to recovery to use new one
Q: Do i need to make full wipes?
A: YES, dont come crying at me, if you didn't .... ;p
Q: What is "full wipes" ?
A: To Wipe : Cache; System; DATA ...
Q: What should i use f2fs or ext4?
A: Both are supported, choose the one you desire
Q: is the Data connection issue of going to / from 4G still present?
A: nope data switchs pretty fast on our new RIL
2G>3G>4G | 4G>3G>2G pretty fast
Q: Does this rom have any Theme support
A: Yup, We have working Theme Engine (madOS extras)
Q: Some translations are missing for my language, can I help?
A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).
Q: I want to report a bug(s) do you have an issue tracker?
A: Yeah... madOS issue tracker
Q: What's working ?
A: Check first Post for current status
Q: App "x" doesn't work, why?
A: Probably not compatible with OREO yet, feedback is welcome
Q: Is the rom rooted?
A: NO, But you can easily root with :
1: Magisk ( v14 onwards.)
2: Super SU ( v2.82 onwards)
Q: Should i root together with rom ?
A: Not advised.. mainly the Magisk that gives some weird issues...
Flash ROM and GAPPS (if you use gapps), after first boot get back to recovery and flash your desire rooting method
Q: Does xposed work?
A: Is there Xposed for O? ... then no ;p
Q: How is battery life with Oreo?
A: Pretty awesome
Q: Does this build support Vulkan?
A: No....duh! v
Q: Does doze work in this build?
A: Yup
Q: Does 4k video recording work?
A: Yes, but not every phone supports it. If 4k worked in the stock rom, it will work in madOS too.
Q: when will (feature/issue here) be fixed?
A: NO ETA , please
Porting F.A.Q.
No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well
G.APPS F.A.Q.
Q:What GAPPS package should I use?
A:OpenGapps arm64 nano/mini
Since there's no Official GAPPS for 8.1.0 just yet...
... we had built OpenGapps nano and pico versions
--> Check Download Section
Q: How to properly install GAPPS?
A:Flash Rom + Flash Gapps at once
CREDITS and Thanks
madOS Team
Our translators, credits list here
A.O.S.P.
AOSPA
DU (Dirty Unicorns)
Omni
HELP supporting madOS
We do this on our free time, however we do have costs on maintaining this :/
Any donation is highly appreciated
You can donate by using
this link
If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]
About madOS Proprietary Apps
You are NOT allowed by any means, to use our madOS apps on any other build, your rom
This is exclusively for OFFICIAL madOS ROM releases
@To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...

Changelogs
[Stable] Build [8.1.0] 20171225
First Release
madOS version: 2.1
Patch Level: 8.1.0 [OPM1] December 5, 2017
Kernel: 3.18.89 (o-8.1.0 branch)
[Stable] Build [8.1.0] 20180102
madOS version: 2.1.1
Fixed UI lags / hangs
Fixed deepsleep
Fixed screen recording
Fixed video playback issues
Updated graphics system
Improved GSM/LTE signal handling
Fixed alarms
Fixed FMRadio
Fixed wallpaper scrolling setting in madLauncher
Fixed 5GHz hotspot issues
Improvements in bluetooth for A2DP
Updated included APNs list
madOS color Engine:
Rebased & many improvements on the engine
Better support on theming Quick Settings
New option to override default Google 8.1 QS theming
New reset button to get back to default 8.1 theming
New MAD mode

Merry Christmas !!

Thanks. Merry Christmas.
The computer died. I will not make the sd card backup.

Marry Xmas to all.

Wow.... Oreo release and directly 8.1 weeeeeeeeeeee!
Didn't expect this before the new year, what a surprise.
Thanx you @fire855
Thank you MAD-team

Hi,
How to install ROM and gapps?
On TWRP or using flash?
Thank you

Should we come from the last 7.1.2 build (which has different partitions from stock)?

I really appreciate the work, but it's somewhat unflashable. New recovery is not stable, it gets stuck sometimes. Also I didn't manage to bring 8.1 to run with Gapps yet.
€: To provide somewhat more information: System crashes when running playstore.
€2: Full wipe made, advanced wipe and wiped every partition. It gets stuck coincidential, there's no proper reason for it, it got stuck once when I flashed MadOS itself, second time it got stuck flashing gapps, so I hope I get it run that night...
€3: Recovery freezes and after 30 seconds (approx) phone reboots.
€4: Nope, I don't get it to work, goddamnit. It freezes almost immediately after I enter my pin.

Help please...
I install new TRWP OREO on old twrp...
when reboot the phone shutoff and does nothing... i cant turn on...

TJFA81 said:
Help please...
I install new TRWP OREO on old twrp...
when reboot the phone shutoff and does nothing... i cant turn on...
Click to expand...
Click to collapse
Hold VOL+ and POWER when rebooting. Then you can choose to boot into TWRP. There you copy the new recovery image and then flash Oreo.

Xorianator said:
Hold VOL+ and POWER when rebooting. Then you can choose to boot into TWRP. There you copy the new recovery image and then flash Oreo.
Click to expand...
Click to collapse
I cant...
When choose recovery the phone freezes. black screen
To install new TWRP OREO its only necessary flash the file recovery.img???

TJFA81 said:
I cant...
When choose recovery the phone freezes. black screen
To install new TWRP OREO its only necessary flash the file recovery.img???
Click to expand...
Click to collapse
Yes, you only have to bring the recovery up again.
What you can also do is: Go back to 7.1 (flash it with SPflashtool) and then do the steps

Xorianator said:
Yes, you only have to bring the recovery up again.
What you can also do is: Go back to 7.1 (flash it with SPflashtool) and then do the steps
Click to expand...
Click to collapse
I cant go to recovery...
Can start the phone but cant go to recovery after flash new recovery file posted on MAD facebook.
I dont have 8.1 because of that, just did the first step anda now cant go to recovery

TJFA81 said:
I cant go to recovery...
Can start the phone but cant go to recovery after flash new recovery file posted on MAD facebook.
I dont have 8.1 because of that, just did the first step anda now cant go to recovery
Click to expand...
Click to collapse
Reflash 7.1 image using SPflashtool, I made a guide for this There you go. Then you can repeat.
Okay so 8.1 is not working at all... I get somewhat a weird failure on screen, the screen "sacks" down (main UI Activity just "fall down", status bar is still up) and then it freezes... Looking forward to get this fixed soon.
€: And the boot time is horrible, before I see a screen it's black for idk 2 Minutes
€3: Nvm lol, actually the phone is now unable to boot in System....
€4: Give it a try with "optional" F2FS File system step, let's see.
€5: Nope, didn't fix a thing. So well, at least I could capture this "sack down" thing:
The red line is where the display ends. As you can see the symbols are still in place. The blue line marks where the activity "sack down" and if this happens (which happens just on coincidence) nothing will happen any further, system's frozen and it reboots afterwards.

TJFA81 said:
Hi,
How to install ROM and gapps?
On TWRP or using flash?
Thank you
Click to expand...
Click to collapse
TWRP

Xorianator said:
Reflash 7.1 image using SPflashtool, I made a guide for this There you go. Then you can repeat.
Okay so 8.1 is not working at all... I get somewhat a weird failure on screen, the screen "sacks" down (main UI Activity just "fall down", status bar is still up) and then it freezes... Looking forward to get this fixed soon.
€: And the boot time is horrible, before I see a screen it's black for idk 2 Minutes
€3: Nvm lol, actually the phone is now unable to boot in System....
€4: Give it a try with "optional" F2FS File system step, let's see.
Click to expand...
Click to collapse
Thank you, already did it... reflash recovery.img but by spflashtool. Now im inside twrp3.2.1...
Now its time to try install oreo and gapps

cedricboquiren said:
Should we come from the last 7.1.2 build (which has different partitions from stock)?
Click to expand...
Click to collapse
Yes, the latest 7.1.2 is mandatory. Added this to the first post now too.

I tried to install the new rom, after I installed the new twrp, the phone is still restarting, I tried to return to 7.1.2 with spft but no success even does not connect with the laptop, what I could do they do?

[ROM] [ 8.1.0 ] Official madOS - Wiko Fever (and clones) [MT6753]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Official Build of madOS ( based on AOSP Oreo ) for Wiko Fever (2gb ram and 3gb ram) with MTK 6753 SoC and its clones:
Micromax Canvas 5 E481
Blu Life One X
Myphone 36
Qmobilez10
madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
RIL (Calls /SMS, Data connection, etc)
Wifi
Bluetooth
FM Radio
All Sensors
Lights;
Both storages & MTP
HW de/encoding
Camera (photos and video)
GPS & aGPS
Audio
madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)
Not working:
XDA:DevDB Information
madOS_O_FEVER, ROM for all devices (see above for details)
Contributors
DerTeufel1980, fire855, superdragonpt
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: unlocked bootloader, twrp
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2018-03-19
Created 2018-03-13
Last Updated 2018-03-22

First time Install Instructions
0) Preparation
0.1) Backup your important data to PC
0.2) Ensure you are running Wiko Fever Android 6 already (also/especially when your device is not wiko fever, but a clone). If you are not, please update to it, before continuing here (replace the preloader from the wiko rom with your stock one, then use 'firmware upgrade' mode in sp flashtool. NEVER use 'format all + download')
Extra steps, if you are on blu life one x:
https://forum.xda-developers.com/showpost.php?p=76003104&postcount=81
0.3) Download “twrp_wiko_fever_oreo.img“: [url]http://www.mediafire.com/file/e96x8ltlyka392e/twrp_wiko_fever_oreo.img[/URL]
0.4) Download “madOS_8.1.0_fever_2018xxyy.zip“ [url]https://www.facebook.com/MediatekAndroidDevelopers/[/URL]
0.5) Optional, Download “Google Apps (aka Gapps)“: [url]http://opengapps.org/[/URL]. Choose: “ARM64“, “Android 8.1“, “nano“ or “pico“ package
1) Unlock bootloader (if not done already):
1.1) Boot for first time your device. I recommend to NOT register/login/add Wifi/add accounts/etc., because the unlock process DELETES all your data in the device. So to go more fast, skip all, and go directly to SETTINGS. In section ABOUT DEVICE, enable the developer options with eight time picks over “Build number”. Then in SETTINGS/DEVELOPER OPTIONS, enable the option “OEM unlocking” and “USB debugging” (if not enabled already), and choose to alollow usb debugging in the popping up window.
1.2) Boot the device in the BOOTLOADER mode (using ADB: "adb reboot-bootloader"). Execute in your computer the command “fastboot oem unlock”, say YES with “vol+” and “power” buttons. Then select reboot. This ERASES completely your device (factory restore), but the bootloader will be UNLOCKED! Two reboots needed.
2) Flash the recovery and boot to it. (choose option a) if you don't have another TWRP already installed, else choose b))
2.1a) Boot in the BOOTLOADER mode (using ADB: "adb reboot-bootloader").
Then execute command “fastboot flash boot twrp_wiko_fever_oreo.img”;
and then “fastboot reboot” (this is a trick to directly bring you to the newly flashed recovery. You can't boot up your current/stock rom at this point anymore).
2.1b) Boot to your current TWRP. Choose install --> image, and select “twrp_wiko_fever_oreo.img“. Then choose “recovery“ as the target. After few seconds, and succesful installation, hit “back“ several times, then go to “reboot --> recovery“
3) Install
3.0) Optional, but recommended: Go to "Wipe --> Advanced Wipe", click "Cache" and then "Repair or Change File system". Then select "Change File system" and choose "F2FS". Swipe to confirm.
Hit "back" three times (you can again choose a partition to change now). Choose "Data" and do as above.
Hit "back" several times, to get back to the main menu. Choose "Reboot --> Recovery".
3.1) While already in recovery (TWRP), connect your phone to pc, and copy “madOS_8.1.0_fever_2018xxyy.zip“ and the Google Apps to your phone.
3.2) Go to "Wipe", and directly slide the slider to the right.
3.3) Get back to main menu with the "back" button
3.4) Go to "Install" and hit “madOS_8.1.0_fever_2018xxyy.zip“, then uncheck all boxes and hit "Add more zips", now choose the Google Apps.
Confirm installation by swiping the slider to the right.
3.5) Reboot System
Click to expand...
Click to collapse
Follow up Install Instructions
Download rom and gapps
boot to recovery
flash rom and gapps
optional: flash superSu/Magisk
reboot system
General F.A.Q.
Q: What the hell is madOS ?
A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.
Q: Which recovery should I use for this ROM?
A: Latest M.A.D. TWRP 3.2.1-0 recovery for OREO 8.1.0
Q: How do i flash new recovery ?
A:
1: You can flash it with a scatter file
2: You can simply flash it from the existing twrp recovery: Install> Install image> Select Oreo TWRP> Select "Recovery" as partition to flash.
Reboot to recovery to use new one
Q: Do i need to make full wipes?
A: YES, dont come crying at me, if you didn't .... ;p
Q: What is "full wipes" ?
A: To Wipe : Cache; System; DATA ...
Q: What should i use f2fs or ext4?
A: Both are supported, choose the one you desire
Q: Does this rom have any Theme support
A: Yup, We have working Theme Engine (madOS extras)
Update: On Oreo 8.1.0:
- We have extended Theme support even further ( madLauncher, messaging, etc)
- As well as many fixes
Q: Some translations are missing for my language, can I help?
A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).
Q: I want to report a bug(s) do you have an issue tracker?
A: Yeah... madOS issue tracker
Q: What's working ?
A: Check first Post for current status
Q: App "x" doesn't work, why?
A: Probably not compatible with OREO yet, feedback is welcome
Q: Is the rom rooted?
A: NO, But you can easily root with :
1: Magisk ( v14 onwards.)
2: Super SU ( v2.82 onwards)
IF there are problems in rooting, you need to report it to the root-threads...There's nothing we can do
Q: Should i root together with rom ?
A: Not advised.. mainly the Magisk that gives some weird issues...
Flash ROM and GAPPS (if you use gapps), after first boot get back to recovery and flash your desire rooting method
Q: Does xposed work?
A: Is there Xposed for O? ... then no ;p
Q: How is battery life with Oreo?
A: Pretty awesome
Q: Does this build support Vulcan?
A: No....duh! v
Q: Does doze work in this build?
A: Yup
Q: when will (feature/issue here) be fixed?
A: NO ETA , please
Porting F.A.Q.
No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well
G.APPS F.A.Q.
Q:What GAPPS package should I use?
A: openGapps arm64 nano/pico
Q: How to properly install GAPPS?
A:Flash Rom + Flash Gapps at once
CREDITS and Thanks
madOS Team
Our translators, credits list here
A.O.S.P.
Pure Nexus
AOSPA
DU (Dirty Unicorns)
Omni
HELP supporting madOS
We do this on our free time, however we do have costs on maintaining this :/
Any donation is highly appreciated
You can donate by using
this link
If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]
About madOS Proprietary Apps
You are NOT allowed by any means, to use our madOS apps on any other build, your rom
This is exclusively for OFFICIAL madOS ROM releases
@To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...

Changelog 19th March 2018:
fixed offline charging
fixed proximity and light sensor
fixed applying smartwake settings after reboot
Facebook release post: https://www.facebook.com/notes/mad/rom-810-official-mados-wiko-fever-mt6753/1640799096003857/

for whatever reason, devDB is not working (very well) at the moment...causing this thread to be shown up, hours after i created it....now it's finally here and updated...and can be used

Thank u so much sir...we owe you?

superdragonpt said:
Android Oreo released
https://forum.xda-developers.com/android/development/rom-official-mados-wiko-fever-clones-t3762804
Click to expand...
Click to collapse
superdragonpt said:
The ROM was made using an Wiko device in the bring up
I know very well this TINNO devices, that are rebranded to many OEMs
In case of baseband (ie: BLU,Qmobile, MMX, you should use your stock baseband modem and place it under vendor/etc)
Cheers
PS: can you, that have other clones ( non-wiko) send us your working baseband?
(This way, we could perhaps just made an flashable zip for baseband or so)
Click to expand...
Click to collapse
Here is firmware folder(baseband) from Life One X with MM update.

Opened an issue about some sensors
https://bitbucket.org/maadteam/mado.../103/some-sensors-light-proximity-not-working

mrmazak said:
Here is firmware folder(baseband) from Life One X with MM update.
Click to expand...
Click to collapse
FERRARI81 said:
Opened an issue about some sensors
https://bitbucket.org/maadteam/mado.../103/some-sensors-light-proximity-not-working
Click to expand...
Click to collapse
Great
This .zip is pushing to system/etc, so this .zip won't work here on Oreo, where everything is moved to vendor/etc
For the time being for the blu, you can either updated the updater-script to push to "vendor" instead of "system" or root it, and move your baseband manually to vendor/etc
About the alsps ( brightness ) what's the sensor used in blu?
We need to enabled it I suppose
Cheers

superdragonpt said:
Great
This .zip is pushing to system/etc, so this .zip won't work here on Oreo, where everything is moved to vendor/etc
For the time being for the blu, you can either updated the updater-script to push to "vendor" instead of "system" or root it, and move your baseband manually to vendor/etc
About the alsps ( brightness ) what's the sensor used in blu?
We need to enabled it I suppose
Cheers
Click to expand...
Click to collapse
So the sensor.lib from Blu?
I will pull it and share.

superdragonpt said:
About the alsps ( brightness ) what's the sensor used in blu?
We need to enabled it I suppose
Cheers
Click to expand...
Click to collapse
Ehm...I have not blue, I have original Wiko Fever
And...I'm noob ...in wich way I could check what's the sensor?

FERRARI81 said:
Ehm...I have not blue, I have original Wiko Fever
And...I'm noob ...in wich way I could check what's the sensor?
Click to expand...
Click to collapse
just because adaptive brightness is not working , does not mean it is the sensor.
If sensor was not working , there is another test (check) you can do.
make a call, then put phone to head and see if screen goes off.
I had before when light sensor was not set correctly, when making a call the screen went black as soon as start a call, then could not get screen back on till 30 seconds after other end hung up the call.
I am away from my LOX now and for few days , so cant give direct test of light sensor.
attached just in case is usefull here are sensor libs from BLU-LOX. They are in /system/lib/hw and /system/lib64/hw.
I believe on oreo they go into /vendor/

Can we flash it over stock Lollipop ROM of Micromax Canvas 5 ??
I have a question that Can I flash it over the stock Lollipop ROM ?? existing kernel is 3.10.65.
Thanks

mrmazak said:
just because adaptive brightness is not working , does not mean it is the sensor.
If sensor was not working , there is another test (check) you can do.
make a call, then put phone to head and see if screen goes off.
I had before when light sensor was not set correctly, when making a call the screen went black as soon as start a call, then could not get screen back on till 30 seconds after other end hung up the call.
Click to expand...
Click to collapse
It doesn't work in call too : the screen is always on.

QUIZILLA said:
I have a question that Can I flash it over the stock Lollipop ROM ?? existing kernel is 3.10.65.
Thanks
Click to expand...
Click to collapse
Please remove the quote of the whole FAQ. This is totally useless to ask your question...
You need to flash wiko mm rom first
FERRARI81 said:
It doesn't work in call too : the screen is always on.
Click to expand...
Click to collapse
I'll check it today

Hello, I write from Padova, Italy,
I have the WIKO FEVER 3GB,I have the problem that after upgrading to MM (Android 6.0), device not connects to PC and no charge. The device is recognized ONLY if it turns off.
Can I do this update procedure with this problem?
I can not connect to the PC because device is not recognized. Can you help me? Can I root through an app installed by the playstore without using pc? Thank you so much for the answers.
Riccardo
ianto:

Rikadoo said:
Hello, I write from Padova, Italy,
I have the WIKO FEVER 3GB,I have the problem that after upgrading to MM (Android 6.0), device not connects to PC and no charge. The device is recognized ONLY if it turns off.
Can I do this update procedure with this problem?
I can not connect to the PC because device is not recognized. Can you help me? Can I root through an app installed by the playstore without using pc? Thank you so much for the answers.
Riccardo
ianto:
Click to expand...
Click to collapse
Why root? To update to oreo, you don't need root... But you still need to copy the new rom to your phone, as well as unlock the bootloader and install the twrp recovery. This needs to be done in fastboot mode by pc. I'd suggest to just try it

Unfortunately I am not very experienced, but I am very interested in solving my problem. I want to install this ROM, but without having to connect the device to the PC.
If I copy the ROM on the SD card. Can I then install?

I am in process of installing new oreo twrp and MADOS.
During install of TWRP, I loose adb authorization. (adb session is "unathorized")
in "prop.default" it has
Code:
ro.secure=1
security.perf_harden=1
ro.adb.secure=1
ro.allow.mock.location=0
ro.debuggable=0
is this intentional?
additional question,
Adb authorize connection window comes up multiple times even after putting check mark on remember this choice.
I think the adb auth problem is my pc, my other phone just started to do this too.
edit:
I have tried couple times to use blu firmware inside vendor folder. But not able to get baseband to be known.
tried just adding blu files ontop of original rom files.
tried removing rom files and adding blu files
tried removing whole folder then adding blu folder
each time I get unknown baseband.
I checked permission and ownership each way I tried and I set it to rw:r:r and root:shell just like original rom version, but not working for me.

One and more questions,....
1. Our bootloader is blocked or already unlocked?
2. If is locked, to unlock the bootloader of our device wiko fever which app I have to install?
3 if isn't locked, how I install a custom recovery like twrp manager?
4 how I boot the custom recovery twrp manager? Maybe if I switch off the device and reboot it, starts automatically the custom recovery?
5 at the end, from twrp can I flash the ROM Oreo?
AHH , last question, can I flash this ROM from my phone with Android MM?

mrmazak said:
I am in process of installing new oreo twrp and MADOS.
During install of TWRP, I loose adb authorization. (adb session is "unathorized")
in "prop.default" it has
is this intentional?
additional question,
Adb authorize connection window comes up multiple times even after putting check mark on remember this choice.
I think the adb auth problem is my pc, my other phone just started to do this too.
edit:
I have tried couple times to use blu firmware inside vendor folder. But not able to get baseband to be known.
tried just adding blu files ontop of original rom files.
tried removing rom files and adding blu files
tried removing whole folder then adding blu folder
each time I get unknown baseband.
I checked permission and ownership each way I tried and I set it to rw:r:r and root:shell just like original rom version, but not working for me.
Click to expand...
Click to collapse
Someone already uploaded vendor files for his model... Was it you? If not, please upload it for us

[ROM] [ 8.1.0 ] Official madOS - Wiko Fever (and clones) [MT6753]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Official Build of madOS ( based on AOSP Oreo ) for Wiko Fever (2gb ram and 3gb ram) with MTK 6753 SoC and its clones:
Micromax Canvas 5 E481
Blu Life One X
Myphone 36
Casper via M1
Qmobilez10
madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
RIL (Calls /SMS, Data connection, etc)
Wifi
Bluetooth
FM Radio
All Sensors
Lights;
Both storages & MTP
HW de/encoding
Camera (photos and video)
GPS & aGPS
Audio
madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)
Not working:

First time Install Instructions
0) Preparation
0.1) Backup your important data to PC
0.2) Download “twrp_wiko_fever_oreo.img“: http://www.mediafire.com/file/e96x8ltlyka392e/twrp_wiko_fever_oreo.img
0.3) Download “madOS_8.1.0_fever_2018xxyy.zip“ https://www.facebook.com/MediatekAndroidDevelopers/
0.4) Optional, Download “Google Apps (aka Gapps)“: http://opengapps.org/. Choose: “ARM64“, “Android 8.1“, “nano“ or “pico“ package
1) Unlock bootloader (if not done already):
1.1) Boot for first time your device. I recommend to NOT register/login/add Wifi/add accounts/etc., because the unlock process DELETES all your data in the device. So to go more fast, skip all, and go directly to SETTINGS. In section ABOUT DEVICE, enable the developer options with eight time picks over “Build number”. Then in SETTINGS/DEVELOPER OPTIONS, enable the option “OEM unlocking” and “USB debugging” (if not enabled already), and choose to alollow usb debugging in the popping up window.
1.2) Boot the device in the BOOTLOADER mode (using ADB: "adb reboot-bootloader"). Execute in your computer the command “fastboot oem unlock”, say YES with “vol+” and “power” buttons. Then select reboot. This ERASES completely your device (factory restore), but the bootloader will be UNLOCKED! Two reboots needed.
2) Flash the recovery and boot to it. (choose option a) if you don't have another TWRP already installed, else choose b))
2.1a) Boot in the BOOTLOADER mode (using ADB: "adb reboot-bootloader").
Then execute command “fastboot flash boot twrp_wiko_fever_oreo.img”;
and then “fastboot reboot” (this is a trick to directly bring you to the newly flashed recovery. You can't boot up your current/stock rom at this point anymore).
2.1b) Boot to your current TWRP. Choose install --> image, and select “twrp_wiko_fever_oreo.img“. Then choose “recovery“ as the target. After few seconds, and succesful installation, hit “back“ several times, then go to “reboot --> recovery“
3) Install
3.0) Optional, but recommended: Go to "Wipe --> Advanced Wipe", click "Cache" and then "Repair or Change File system". Then select "Change File system" and choose "F2FS". Swipe to confirm.
Hit "back" three times (you can again choose a partition to change now). Choose "Data" and do as above.
Hit "back" several times, to get back to the main menu. Choose "Reboot --> Recovery".
3.1) While already in recovery (TWRP), connect your phone to pc, and copy “madOS_8.1.0_fever_2018xxyy.zip“ and the Google Apps to your phone.
3.2) Go to "Wipe", and directly slide the slider to the right.
3.3) Get back to main menu with the "back" button
3.4) Go to "Install" and hit “madOS_8.1.0_fever_2018xxyy.zip“, then uncheck all boxes and hit "Add more zips", now choose the Google Apps.
Confirm installation by swiping the slider to the right.
3.5) Reboot System
Click to expand...
Click to collapse
Follow up Install Instructions
Download rom and gapps
boot to recovery
flash rom and gapps
optional: flash superSu/Magisk
reboot system
General F.A.Q.
Q: What the hell is madOS ?
A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.
Q: Which recovery should I use for this ROM?
A: Latest M.A.D. TWRP 3.2.1-0 recovery for OREO 8.1.0
Q: How do i flash new recovery ?
A:
1: You can flash it with a scatter file
2: You can simply flash it from the existing twrp recovery: Install> Install image> Select Oreo TWRP> Select "Recovery" as partition to flash.
Reboot to recovery to use new one
Q: Do i need to make full wipes?
A: YES, dont come crying at me, if you didn't .... ;p
Q: What is "full wipes" ?
A: To Wipe : Cache; System; DATA ...
Q: What should i use f2fs or ext4?
A: Both are supported, choose the one you desire
Q: Does this rom have any Theme support
A: Yup, We have working Theme Engine (madOS extras)
Update: On Oreo 8.1.0:
- We have extended Theme support even further ( madLauncher, messaging, etc)
- As well as many fixes
Q: Some translations are missing for my language, can I help?
A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).
Q: I want to report a bug(s) do you have an issue tracker?
A: Yeah... madOS issue tracker
Q: What's working ?
A: Check first Post for current status
Q: App "x" doesn't work, why?
A: Probably not compatible with OREO yet, feedback is welcome
Q: Is the rom rooted?
A: NO, But you can easily root with :
1: Magisk ( v14 onwards.)
2: Super SU ( v2.82 onwards)
IF there are problems in rooting, you need to report it to the root-threads...There's nothing we can do
Q: Should i root together with rom ?
A: Not advised.. mainly the Magisk that gives some weird issues...
Flash ROM and GAPPS (if you use gapps), after first boot get back to recovery and flash your desire rooting method
Q: Does xposed work?
A: Is there Xposed for O? ... then no ;p
Q: How is battery life with Oreo?
A: Pretty awesome
Q: Does this build support Vulcan?
A: No....duh! v
Q: Does doze work in this build?
A: Yup
Q: when will (feature/issue here) be fixed?
A: NO ETA , please
Porting F.A.Q.
No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well
G.APPS F.A.Q.
Q:What GAPPS package should I use?
A: openGapps arm64 nano/pico
Q: How to properly install GAPPS?
A:Flash Rom + Flash Gapps at once
CREDITS and Thanks
madOS Team
Our translators, credits list here
A.O.S.P.
Pure Nexus
AOSPA
DU (Dirty Unicorns)
Omni
HELP supporting madOS
We do this on our free time, however we do have costs on maintaining this :/
Any donation is highly appreciated
You can donate by using
this link
If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]
About madOS Proprietary Apps
You are NOT allowed by any means, to use our madOS apps on any other build, your rom
This is exclusively for OFFICIAL madOS ROM releases
@To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...

one more

Hi, Good Job with all your Rom's and devices supported.
It's possible that the mad theam could help me to create a custom rom for my device? I've got two mkt phones, one mtk6592 and other mtk6735.
Thanks for your work!!

@DerTeufel1980 can you add "micromax-canvas-5" tag so that micromax canvas user can view this thread easily

I tried this ROM on a Blu Life One X 2016, everything seems to work except baseband; unknown. Anyone have any ideas on how to get cellular to work? Thanks.
edit: I just noticed that doing a "Format All + Download" re-locks the bootloader. Reinstalling factory ROM and going to do a bootloader unlock and try again.
edit 2: After unlocking the bootloader and following the guide baseband continues to say unknown after flashing. Oh well....

nervehammer said:
@DerTeufel1980 can you add "micromax-canvas-5" tag so that micromax canvas user can view this thread easily
Click to expand...
Click to collapse
Good idea
---------- Post added at 08:42 AM ---------- Previous post was at 08:41 AM ----------
Jorge_007 said:
I tried this ROM on a Blu Life One X 2016, everything seems to work except baseband; unknown. Anyone have any ideas on how to get cellular to work? Thanks.
edit: I just noticed that doing a "Format All + Download" re-locks the bootloader. Reinstalling factory ROM and going to do a bootloader unlock and try again.
edit 2: After unlocking the bootloader and following the guide baseband continues to say unknown after flashing. Oh well....
Click to expand...
Click to collapse
I guess u are not on the whatsapp or telegram group where we support our devices.
---------- Post added at 08:43 AM ---------- Previous post was at 08:42 AM ----------
DerTeufel1980 said:
This is a Official Build of madOS ( based on AOSP Oreo ) for Wiko Fever (2gb ram and 3gb ram) with MTK 6753 SoC and its clones:
Micromax Canvas 5 E481
Blu Life One X
Myphone 36
Casper via M1
Qmobilez10
madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.
Working:
RIL (Calls /SMS, Data connection, etc)
Wifi
Bluetooth
FM Radio
All Sensors
Lights;
Both storages & MTP
HW de/encoding
Camera (photos and video)
GPS & aGPS
Audio
madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)
Not working:
Click to expand...
Click to collapse
Thanks a lot sir for giving our devices a new soul.?:laugh:

The ROM was made using an Wiko device in the bring up
I know very well this TINNO devices, that are rebranded to many OEMs
In case of baseband (ie: BLU,Qmobile, MMX, you should use your stock baseband modem and place it under vendor/etc)
Cheers
PS: can you, that have other clones ( non-wiko) send us your working baseband?
(This way, we could perhaps just made an flashable zip for baseband or so)

Additional to the two posts above, you should avoid using "format all + download", since this does not fix anything (if your device isn't soft bricked), but deletes your nvram/imei numbers
finally, the originally created devDB thread is up, and can be used:
https://forum.xda-developers.com/android/development/rom-official-mados-wiko-fever-clones-t3762800
gonna close this one now...it's gonna be deleted soon...

[ROM] [ 8.1.0 ] Official madOS - Vernee Thor [MT6753]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Official Build of madOS ( based on AOSP Oreo ) for Vernee Thor (not thor E and not thor Plus) with MTK 6753 SoC
This is only working on devices, manufactured before October 2016. If the pre-installed software was dated October already, your device does not work! Don't ask me/us to fix this...ask Vernee to release the kernel source code! No updated kernel source code --> no updated software.​
madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
RIL (Calls /SMS, Data connection, etc)
Wifi
Bluetooth
FM Radio
All Sensors (incl. fingerprint)
Lights;
Both storages & MTP
HW de/encoding
Camera (photos and video)
GPS & aGPS
Audio
madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)
Not working:
nothing
XDA:DevDB Information
madOS_O_THOR, ROM for Vernee Thor (see above for details)
Contributors
DerTeufel1980, fire855, superdragonpt
Source Code: [url]https://github.com/MediatekAndroidDevelopers[/URL]
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.18.y
ROM Firmware Required: phone manufactured before october 2016
Based On: AOSP
Version Information
Status: Stable
Created 2018-03-20
Last Updated 2018-03-20

Reserved
First time Install Instructions
0) Preparation
0.1) Backup your important data to PC
0.2) Download “twrp_vernee_thor_oreo.img“:
http://www.mediafire.com/file/m58f5ifmopyb209/twrp_vernee_thor_oreo.img
0.3) Download “madOS_8.1.0_thor_2018xxyy.zip“ https://www.facebook.com/MediatekAndroidDevelopers/
0.4) Optional, Download “Google Apps (aka Gapps)“: http://opengapps.org/. Choose: “ARM64“, “Android 8.1“, “nano“ or “pico“ package
1) Flash the recovery and boot to it. (choose option a) if you don't have another TWRP already installed, else choose b))
1.1a) Boot in the BOOTLOADER mode (using ADB: "adb reboot-bootloader").
Then execute command “fastboot flash boot twrp_vernee_thor_oreo.img”;
and then “fastboot reboot” (this is a trick to directly bring you to the newly flashed recovery. You can't boot up your current/stock rom at this point anymore).
1.1b) Boot to your current TWRP. Choose install --> image, and select twrp_vernee_thor_oreo.img“. Then choose “recovery“ as the target. After few seconds, and succesful installation, hit “back“ several times, then go to “reboot --> recovery“
2) Install
2.0) Optional, but recommended: Go to "Wipe --> Advanced Wipe", click "Cache" and then "Repair or Change File system". Then select "Change File system" and choose "F2FS". Swipe to confirm.
Hit "back" three times (you can again choose a partition to change now). Choose "Data" and do as above.
Hit "back" several times, to get back to the main menu. Choose "Reboot --> Recovery".
2.1) While already in recovery (TWRP), connect your phone to pc, and copy “madOS_8.1.0_thor_2018xxyy.zip“ and the Google Apps to your phone.
2.2) Go to "Wipe", and directly slide the slider to the right.
2.3) Get back to main menu with the "back" button
2.4) Go to "Install" and hit “madOS_8.1.0_thor_2018xxyy.zip“, then uncheck all boxes and hit "Add more zips", now choose the Google Apps.
Confirm installation by swiping the slider to the right.
2.5) Reboot System
Click to expand...
Click to collapse
Follow up Install Instructions
Download rom and gapps
boot to recovery
flash rom and gapps
optional: flash superSu/Magisk
reboot system
General F.A.Q.
Q: What the hell is madOS ?
A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.
Q: Can I install this rom on any other device, than the one mentioned in the title/description?
A:
WTF! Of course not! It is not mentioned in the title/description for some reason...how stupid can one be?!
If you still come to my thread and ask this stupid question, I'll answer some random nonsense. Don't come to me to complain when you break your device!
Q: Which recovery should I use for this ROM?
A: Latest M.A.D. TWRP 3.2.1-0 recovery for OREO 8.1.0
Q: How do i flash new recovery ?
A:
1: You can flash it with a scatter file
2: You can simply flash it from the existing twrp recovery: Install> Install image> Select Oreo TWRP> Select "Recovery" as partition to flash.
Reboot to recovery to use new one
Q: Do i need to make full wipes?
A: YES, dont come crying at me, if you didn't .... ;p
Q: What is "full wipes" ?
A: To Wipe : Cache; System; DATA ...
Q: What should i use f2fs or ext4?
A: Both are supported, choose the one you desire
Q: Does this rom have any Theme support
A: Yup, We have working Theme Engine (madOS extras)
Update: On Oreo 8.1.0:
- We have extended Theme support even further ( madLauncher, messaging, etc)
- As well as many fixes
Q: Some translations are missing for my language, can I help?
A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).
Q: I want to report a bug(s) do you have an issue tracker?
A: Yeah... madOS issue tracker
Q: What's working ?
A: Check first Post for current status
Q: App "x" doesn't work, why?
A: Probably not compatible with OREO yet, feedback is welcome
Q: Is the rom rooted?
A: NO, But you can easily root with :
1: Magisk ( v14 onwards.)
2: Super SU ( v2.82 onwards)
IF there are problems in rooting, you need to report it to the root-threads...There's nothing we can do
Q: Should i root together with rom ?
A: Not advised.. mainly the Magisk that gives some weird issues...
Flash ROM and GAPPS (if you use gapps), after first boot get back to recovery and flash your desire rooting method
Q: Does xposed work?
A: Is there Xposed for O? ... then no ;p
Q: How is battery life with Oreo?
A: Pretty awesome
Q: Does this build support Vulcan?
A: No....duh! v
Q: Does doze work in this build?
A: Yup
Q: when will (feature/issue here) be fixed?
A: NO ETA , please
Porting F.A.Q.
No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well
G.APPS F.A.Q.
Q:What GAPPS package should I use?
A: openGapps arm64 nano/pico
Q: How to properly install GAPPS?
A:Flash Rom + Flash Gapps at once
CREDITS and Thanks
madOS Team
Our translators, credits list here
A.O.S.P.
Pure Nexus
AOSPA
DU (Dirty Unicorns)
Omni
HELP supporting madOS
We do this on our free time, however we do have costs on maintaining this :/
Any donation is highly appreciated
You can donate by using
this link
If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]
About madOS Proprietary Apps
You are NOT allowed by any means, to use our madOS apps on any other build, your rom
This is exclusively for OFFICIAL madOS ROM releases
@To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...

Reserved

Can I install it on my K4 Note?

Pritam Tumma said:
Can I install it on my K4 Note?
Click to expand...
Click to collapse
Can you read?

Is it possible to roolback to nougat (7.1.2) after install this update?

drifeter said:
Is it possible to roolback to nougat (7.1.2) after install this update?
Click to expand...
Click to collapse
Yes, you would need to flash the N twrp, wipe and flash the N rom

"Size of image is larger than target device" trying to flash new recovery. I just wiped everything, now I'm out of OS for this moment xD
Can you help me?
I used your last OS on this phone. It's before october(received it on may of that year) and MT6753
I have twrp 3.0.... from megthebest
Thank you for your patience
--
EDIT: Can I wipe "internal storage"? I didn't wipe everything :v

ZeDdYRov said:
"Size of image is larger than target device" trying to flash new recovery. I just wiped everything, now I'm out of OS for this moment xD
Can you help me?
I used your last OS on this phone. It's before october(received it on may of that year) and MT6753
I have twrp 3.0.... from megthebest
Thank you for your patience
--
EDIT: Can I wipe "internal storage"? I didn't wipe everything :v
Click to expand...
Click to collapse
I'll check the size error in a bit...
Of course you can wipe internal storage, but keep in mind that this is where your pictures are.
edit: checked/flashed the twrp_vernee_thor_oreo.img.... all fine with it...its size is 13.4mb, the recovery partition is 16mb. i suppose this 'megTheBest recovery' just isn't the best....

DerTeufel1980 said:
I'll check the size error in a bit...
Of course you can wipe internal storage, but keep in mind that this is where your pictures are.
Click to expand...
Click to collapse
Thank you for your quick response!
I wiped internal storage, data, cache, and system. Do I should wipe anything more in order for this to work? I'm still stuck on the error. I go to Install - Install Image, pick the twrp_vernee_thor_oreo.img file on Recovery Partition, and receive the message on the comment above.

ZeDdYRov said:
Thank you for your quick response!
I wiped internal storage, data, cache, and system. Do I should wipe anything more in order for this to work? I'm still stuck on the error. I go to Install - Install Image, pick the twrp_vernee_thor_oreo.img file on Recovery Partition, and receive the message on the comment above.
Click to expand...
Click to collapse
Since you already removed everything, I'd suggest to just install the stock 6.0 rom with flashtool and 'firmware upgrade' option

DerTeufel1980 said:
I'll check the size error in a bit...
Of course you can wipe internal storage, but keep in mind that this is where your pictures are.
edit: checked/flashed the twrp_vernee_thor_oreo.img.... all fine with it...its size is 13.4mb, the recovery partition is 16mb. i suppose this 'megTheBest recovery' just isn't the best....
Click to expand...
Click to collapse
lol, I just gave the name of the dev because could help you figure it out. I'm n00b on this :V
I just did sh** with the files. I was trying to flash with a file called twrp_blablabla.img that was 422MB. For some reason I missclicked on the file while saving :v
EDIT: SORRY and Thank you

Yeahhhhhh finally 8.1 on our Thor.... So great!
Thank you so much Mad-team.
Weeeeeeeeeeeeee!!!

DerTeufel1980
Thank you for your work
Everything works without problems.
:good:

I'm on madOS for 40min and I'm loving it. This is fully customize as you want this machine working. Well played!!! LOVE YOU MAD TEAM

Hello again! Software buttons get bugged when we enter on opened apps menu, and its has a ghost start buttons I'm n00b and I found a bug: D

ZeDdYRov said:
Hello again! Software buttons get bugged when we enter on opened apps menu, and its has a ghost start buttons I'm n00b and I found a bug: D
Click to expand...
Click to collapse
I am using softbuttons for a long time and they always work good. Maybe you can try to go back to default settings... Wipe cache/dalvik and try again

This is for the first revision, is it possible for you to make it for the second? Please...

RalphMalph said:
I am using softbuttons for a long time and they always work good. Maybe you can try to go back to default settings... Wipe cache/dalvik and try again
Click to expand...
Click to collapse
If I could be able to change what buttons do... the back button on soft button is on the right, and I'm used to it on the left. There's any option on madOS to change what I'm telling to you?
EDIT: I read second time and notice what you said. I'll try! Thank you for the tip

ppdua said:
This is for the first revision, is it possible for you to make it for the second? Please...
Click to expand...
Click to collapse
Re-read at least the first ten lines of the first post, before asking things like this