LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for official LineageOS 14.1 builds for OnePlus 3/3T. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Known bugs:
Front camera is buggy, due to the buggy camera HAL Fixed by OnePlus
Installation:
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (See #2 for details)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm64)
Reboot
Source code:
https://github.com/lineageos
Credits:
LineageOS Team & Contributors
Code Aurora Forum
......
Download:
https://download.lineageos.org/oneplus3
XDA:DevDB Information
LineageOS, ROM for the OnePlus 3
Contributors
dianlujitao, Grarak
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
Version Information
Status: Nightly
Created 2016-11-09
Last Updated 2017-03-27
Release note:
New builds (after 2017/1/15) uses F2FS backported from 4.10 kernel, you may meet compatibility problems such as deadlocks, if you do, flash TWRP provided in OP and choose "Wipe -> Format Data" to format(not just wipe) your /data partition, this will clean the entire /data partition, including the emulated sdcard, so don't forget to backup your data before. After that, your data partition will be formatted into ext4, if you want to keep using f2fs, just convert fs type normally in TWRP.
[*]For oneplus3, my unofficial TWRP is recommended, as it's what I use. For 3T, TWRP 3.0.4 is recommended.
As of 2017/6/17, official TWRP for OnePlus 3(https://dl.twrp.me/oneplus3/) is updated with latest LineageOS kernel and OxygenOS decryption stuff, it builds against Omni 7.1.2 and supports both op3&3t, now it's the recommended recovery.
20170120 build includes sdcardfs, security fixes and camera fixes&improvements, touch to focus is fixed as well, if it's still not working, clean Snap's data. BTW N kernel source is released now, I'll take days to bring up, don't ask for ETA.
Regarding installation, we recommend that users wipe when switching to LineageOS, and reinstall their gapps. However, we recognize that this can be time consuming, so we are offering an EXPERIMENTAL (read as, if it fails, you’ll have to wipe anyways) solution. Visit http://lineageos.org/Update-and-Build-Prep/for more details
Started from lineage-14.1-20170207-nightly-oneplus3-signed.zip, we provide unified builds for both 3&3T, and you need to install certain firmware to pass the TrustZone assertion. Currently they're the OxygenOS Open Beta 19/11 ones. As oneplus won't update them every time new OTAs are rolling out, firmware from other versions might also pass the assertion.
FAQs:
My status bar quick pulldown and notification slider are broken, why?
See https://github.com/opengapps/opengapps/wiki/Notes-for-CMSetupWizard
Why the builds are unified?
Tell me the difference between OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883 and OnePlus3TOxygen_28_OTA_039_all_1701140132_de9036f11e2246a8, why not?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Latest Firmware files for oneplus3/oneplus3t -5.7.2017-
Make a nandroid backup before you proceed
Flash the following files using the latest official twrp to avoid any recovery related issues.
Make sure to do a clean flash if your rom requires an updated firmware.
Don't ever flash an oneplus3 firmware on oneplus3t or an oneplus3t firmware on oneplus3.
Oneplus3
Instructions only for oneplus3!
1-clean flash is recommended.
2-Falsh OnePlus3_OpenBeta19-FIRMWARE+MODEM-flashable.zip.
3-Flash the latest laos nightly.
4-optional: gapps arm64 7.1 and -su-addon arm64, this enables inbuild laos root.
5-Wipe Dalvik/cache and reboot.
Oneplus3t
Instructions only for oneplus3t!
1-clean flash is recommended.
2-Flash OnePlus3T_Beta10-(4-7-17)-FIRMWARE-flashable.zip.
3-Flash the latest laos nightly
4-optional: gapps arm64 7.1 and -su-addon arm64, this enables inbuild laos root.
5-Wipe Dalvik/cache and reboot.
For people who rather use the oxygenos camera:
Get OnePlusCameraV8-siankatabg.apk and OnePlusGallery-V8-siankatabg.apk
If you have problems after flashing any custom kernels please provide a log in the thread where you got the kernel from and not here!
Credits:
@nvertigo67 @djsubterrain @Eliminater @kamilmirza op3t firmware
@jamal2367 op3 firmware
@siankatabg oos camera/gallery port
Maybe let a CM member start the official thread?
@dianlujitao : Thanks for maintaining this.
Currently call audio is broken by sound trigger commit.
Even when that revert, noise cancellation not working / echo happens while in calls.
please fix this only issue.
RohanAJoshi said:
@dianlujitao : Thanks for maintaining this.
Currently call audio is broken by sound trigger commit.
Even when that revert, noise cancellation not working / echo happens while in calls.
please fix this only issue.
Click to expand...
Click to collapse
Steve is investigating on that
dianlujitao said:
Steve is investigating on that
Click to expand...
Click to collapse
That's great, waiting for noise cancellation fix.
I have a custom TWRP from the OOS 3.5.5 (OnePlus thread),
twrp-3.0.2-22-oneplus3.img
I think only that is working correctly with CM 14.1 Official ROM ?
osr.arora said:
I have a custom TWRP from the OOS 3.5.5 (OnePlus thread),
twrp-3.0.2-22-oneplus3.img
I think only that is working correctly with CM 14.1 Official ROM ?
Click to expand...
Click to collapse
Yes, 3.0.2.19 & 3.0.2.22 should work with every rom.
So use always this twrp versions to get sure.
dianlujitao said:
Steve is investigating on that
Click to expand...
Click to collapse
Finally someone official is here
Thank you very much!!!
Can you just tell me,
Is that included baseband/firmware inside the rom, 3.5.5 or 3.2.7 or mixed or sth else?
Thanks
Cheers
Is possible flash 14.1nightly on experimental? I have from 2 weeks
alteus83 said:
Is possible flash 14.1nightly on experimental? I have from 2 weeks
Click to expand...
Click to collapse
It is possible, but you can get some unexpected bugs...
Better to do a clean start, with full wipe.
And dirty flash upcoming nightlys.
Cheers
When i plug my Phone into the charger or my pc the charging icon wont show up (lighting bolt in the battery)
After install i tried a cache/dalvik clear, did not help
The Phone is connected to the computer, it says charging..
https://postimg.org/image/xj8af43tf/
yooouuri said:
When i plug my Phone into the charger or my pc the charging icon wont show up (lighting bolt in the battery)
After install i tried a cache/dalvik clear, did not help
The Phone is connected to the computer, it says charging..
https://postimg.org/image/xj8af43tf/
Click to expand...
Click to collapse
known issue with cm14.1
yooouuri said:
When i plug my Phone into the charger or my pc the charging icon wont show up (lighting bolt in the battery)
After install i tried a cache/dalvik clear, did not help
The Phone is connected to the computer, it says charging..
https://postimg.org/image/xj8af43tf/
Click to expand...
Click to collapse
This is known... There are some problems with battery icon and battery stats too...
@dianlujitao
OP need to add that bugs into to the bug list:
1. Echo (loudspeaker) noise calcellation
2. Battery stats reset + charging text + charging icon
3. GPS problems especially while driving. (you get a perfect gps fix but if you move fast "drive" you get wrong coordinates)
4. All bugs related to legacy HAL1
5. Srgb colors not working
Cheers
Ramalama said:
This is known... There are some problems with battery icon and battery stats too...
OP need to add that bugs into to the bug list:
1. Echo (loudspeaker) noise calcellation
2. Battery stats reset + charging text + charging icon
3. GPS problems especially while driving. (you get a perfect gps fix but if you move fast "drive" you get wrong coordinates)
4. All bugs related to legacy HAL1
Cheers
Click to expand...
Click to collapse
Agree! :good:
Ramalama said:
This is known... There are some problems with battery icon and battery stats too...
@dianlujitao
OP need to add that bugs into to the bug list:
1. Echo (loudspeaker) noise calcellation
2. Battery stats reset + charging text + charging icon
3. GPS problems especially while driving. (you get a perfect gps fix but if you move fast "drive" you get wrong coordinates)
4. All bugs related to legacy HAL1
Cheers
Click to expand...
Click to collapse
You guys may need to wait because cm14.1 is still highly experimental
So its waiting for OP to release some of their HAL?
Ramalama said:
This is known... There are some problems with battery icon and battery stats too...
@dianlujitao
OP need to add that bugs into to the bug list:
1. Echo (loudspeaker) noise calcellation
2. Battery stats reset + charging text + charging icon
3. GPS problems especially while driving. (you get a perfect gps fix but if you move fast "drive" you get wrong coordinates)
4. All bugs related to legacy HAL1
Cheers
Click to expand...
Click to collapse
Add on
5. In call volume slider not working in speaker or headset mode.
dianlujitao said:
You guys may need to wait because cm14.1 is still highly experimental
Click to expand...
Click to collapse
You have right, but that's the actual bug list that users know what's not working atm
I don't think that next few builds will not be highly experimental
yooouuri said:
So its waiting for OP to release some of their HAL?
Click to expand...
Click to collapse
Yes, till they release nougat.
mgear356 said:
Add on
5. In call volume slider not working in speaker or headset mode.
Click to expand...
Click to collapse
I know, but this bug is only since yesterday, there is a commit that broke it... I think it will be fixed on next 1-2 builds...
Cheers
I would appreciate if op could add link to supported twrp in the first post.. It would be really helpful..
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 7 (nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What works:
Calls/SMS/Mobile data
Wifi
Bluetooth
GPS
Camera (Photo/Video/Flashlight)
Audio
Fingerprint sensor
DT2W
Keydisabler
Notification LED
Torchlight
Broken
You tell me
Source code:
device tree: https://github.com/HighwayStar/android_device_nubia_nx551j
device-common: https://github.com/HighwayStar/android_device_nubia_msm8953-common
kernel: https://github.com/HighwayStar/android_kernel_nubia_msm8953
vendor: https://github.com/HighwayStar/android_vendor_nubia
Clean code with kernel rebased on top of latest caf nougat msm8953 tag. Warning! this rom uses forceencrypt flag for /data partition, same as global stock rom. If you coming from Chinese ROM or other not encrypted /data ROM your first boot can take long. Do not reboot while encrypting, or you will lost all your data. It's recommend to make backup.
Download
2018-09-17
Fixed headset detection issue
Updated Lineage code
gdrive: lineage-14.1-20180917-UNOFFICIAL-nx551j.zip
mailru: lineage-14.1-20180917-UNOFFICIAL-nx551j.zip
Previous versions:
2018-08-22
Moved to common device tree with Nubia Z11 mini s nx549j
Removed unused camera libraries
Fixed Neocharge in offline-charging mode
Updated Lineage code
gdrive: lineage-14.1-20180822-UNOFFICIAL-nx551j.zip
mailru: lineage-14.1-20180822-UNOFFICIAL-nx551j.zip
2018-07-20
* Fixed Google camera crash in HDR+ mode in low-light conditions
* Fixed color "jumps", "blinks", "grayish color" in all HAL3 apps
* Looks like fully working HAL3 mode here
gdrive: lineage-14.1-20180720-UNOFFICIAL-nx551j.zip
mailru: lineage-14.1-20180720-UNOFFICIAL-nx551j.zip
2018-07-16
* Test build with opensource camera HAL. It enables HAL3 mode, but may also add some issues, please test if camera apps you are using is still working fine. Google camera mods working too, with HDR+ in Nexus 5X or Nexus 6P mode(tested with MGC_5.1.018.177624777-41364271.apk (BSG, 2018-07-12) version)
gdrive: lineage-14.1-20180716-UNOFFICIAL-nx551j.zip
mailru: lineage-14.1-20180716-UNOFFICIAL-nx551j.zip
2018-07-10
* Fixed phone crash when using dual sim.
* Set LTE mode on first run to allow to use mobile data for setup
* Added thermal daemon configs to control device temperature
gdrive:lineage-14.1-20180710-UNOFFICIAL-nx551j.zip
mailru: lineage-14.1-20180710-UNOFFICIAL-nx551j.zip
2018-07-09
* Fixed Phone app crash on Enable/Disable Airplane mod
* Fixed torchligh
* Fixed notification LED. Now buttons backlight red leds blinking on notification
gdrive: lineage-14.1-20180709-UNOFFICIAL-nx551j.zip
mailru: lineage-14.1-20180709-UNOFFICIAL-nx551j.zip
2018-07-04
Fixed high CPU load and high CPU frequencies issue
Removed FM Radio app
Added LTE option to SIM network menu
Fixed call recording
Fixed displayed battery capacity
gdrive: lineage-14.1-20180704-UNOFFICIAL-nx551j.zip
mailru: lineage-14.1-20180704-UNOFFICIAL-nx551j.zip
2018-07-02
Initial build
gdrive: lineage-14.1-20180702-UNOFFICIAL-nx551j.zip
mailru: lineage-14.1-20180702-UNOFFICIAL-nx551j.zip
To install this you have to install TWRP first. I can recommend this version, built with same kernel as ROM. nx551-twrp-3.2.1.img
If you want to use google apps use ARM64 Android 7.1 opengapps package https://opengapps.org/.
If you need root use Lineage addonsu or Magisk
XDA:DevDB Information
[ROM][UNOFFICIAL][7.1.2][nx551j] LineageOS 14.1 for Nubia M2 [17/09/2218], ROM for all devices (see above for details)
Contributors
highwaystar_ru
Source Code: https://github.com/HighwayStar/android_kernel_nubia_msm8953
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: LineageOs
Version Information
Status: No Longer Updated
Created 2018-07-02
Last Updated 2018-09-17
Thanks for the work you've done. In the future, plan to go to the official assembly?
Big thanks.
LuigeUA said:
Thanks for the work you've done. In the future, plan to go to the official assembly?
Click to expand...
Click to collapse
Yes, code is done as clean as possible way to be able to go official. To go official it has to be rebased to oreo first. It should be not that hard now.
I can not adjust my fingerprint, go to my home screen when scanning
LuigeUA said:
I can not adjust my fingerprint, go to my home screen when scanning
Click to expand...
Click to collapse
Had this issue too. Have not found fix yet. Workaround is to setup one fingerprint on first boot, it not goes home here. Second fingerprint can be added anytime later, , there is no such issue with second and later fingeeprints.
Hello,
Sorry for the noob question, but I cannot install the ROM because I receive an error while installing. Something like "this ROM cannot be installed because it is for device nx551j device and yours is NX551J"
How can I change this parameter?
Thank you for your help.
estuardo4 said:
Hello,
Sorry for the noob question, but I cannot install the ROM because I receive an error while installing. Something like "this ROM cannot be installed because it is for device nx551j device and yours is NX551J"
How can I change this parameter?
Thank you for your help.
Click to expand...
Click to collapse
Please install twrp from the first post. It should help.
Api
Hi , amazing work bringing nougat for us , thanks...
I'm testing for few hours and i tried many camera apps without lucky.. tried to enable camera2api for gcam and get force stopped in all cameras , could you help me ?
Another question is , will you bring future updates by OTA ?
Thanks a lot , wonderfull job.
estuardo4 said:
Hello,
Sorry for the noob question, but I cannot install the ROM because I receive an error while installing. Something like "this ROM cannot be installed because it is for device nx551j device and yours is NX551J"
How can I change this parameter?
Thank you for your help.
Click to expand...
Click to collapse
it only works with the twrp that is for download on the linage rom downloadpage ,had the same issue.
i did flash the twrp that is advised and did work perfectly.
rolandvb said:
it only works with the twrp that is for download on the linage rom downloadpage ,had the same issue.
i did flash the twrp that is advised and did work perfectly.
Click to expand...
Click to collapse
Is there other way to install? Yesterday I flashed the persistance.img posted by Mauronofrio without problems and now, for the life of me, I can't get my Win10 machine to recognize my device. I uninstalled, restarted with the option of not checking for signature files, installed, nothing. Uninstalled and installed old drivers and nothing. Uninstalled and installed the newest versions from Google and nothing. My win10 pc can't recognize my Nubia
And yes, I tried to make a working USB live image with FWUL but I don't have the technical knowledge to know whats going on and why I can't use it with my Nubia.
Did test this android 7.1 OS this evening, and there are some bugs,the camera did not work on my phone and goty black screen,with other app camara did work
fingerprintscanner did not work properly and could not remove or add fingerprints ,also phone sometimes loses and has to search again for 4g network while using phone
and got symcard message while sym alreddy did work.
hope you can do something about these issues.
i can say the phone is a lot faster an snappyer compaired to all other roms i did test
it would be great if android 8 will come available with this OS, this will make this phone a up to date phone for a bargain!
I think the M2 will even be faster on android 8
afther testing and tryed to restore my older rom i just backed up my the phone it did not boot and ended with a bick
i did restart phone in twrp and did flash the twrp i did use before and everything was ok again.
So the`re seem to be TWRP ussues between different versions, i did use the original twrp that was relased by TWRP app
First, thanks for the good work. I have found a serious bug, there is no processor frequency control and it is always full. Then heat the phone and drain the battery.
bumperiano said:
First, thanks for the good work. I have found a serious bug, there is no processor frequency control and it is always full. Then heat the phone and drain the battery.
Click to expand...
Click to collapse
Yes, something broken here, will check it out.
The processor constantly operates at the maximum frequency. The battery capacity is 3000 mA/h and not 3630.
Woah great work! Will be running this as soon as that CPU util bug is squashed Just a thought, you've posted this in the general Android misc thread although we have our own dedicated sub-forum, any chance of moving it there? Might get better visibility? https://forum.xda-developers.com/t/zte-nubia-m2
estuardo4 said:
Is there other way to install? Yesterday I flashed the persistance.img posted by Mauronofrio without problems and now, for the life of me, I can't get my Win10 machine to recognize my device. I uninstalled, restarted with the option of not checking for signature files, installed, nothing. Uninstalled and installed old drivers and nothing. Uninstalled and installed the newest versions from Google and nothing. My win10 pc can't recognize my Nubia
And yes, I tried to make a working USB live image with FWUL but I don't have the technical knowledge to know whats going on and why I can't use it with my Nubia.
Click to expand...
Click to collapse
i confirm the issue that the phone is not recognized in windows 10 ,you can see the partitions but when opening there is nothing so see and empty while it is not and no files can be added.
this is a good start but at the moment this rom is not realy a usable rom, also very strange that it only can be flashed with the twrp provided. you get error 7 and also the message this rom is not suitable
for this phone and i am using the original TWRP provided bij TWRP itself. i don`t want to reflash my phone between different twrp versions to be able to restore my phone.
i had the official TWRP installed and did not work with this rom, so i think this must be corrected to and be compatable with the original released twrp , by twrp.
the twrp provided on the rom downloadpage also does load very slow and takes 3 times longer to load.
LuigeUA said:
The processor constantly operates at the maximum frequency. The battery capacity is 3000 mA/h and not 3630.
Click to expand...
Click to collapse
The battery capacity is 3630 and not 3000
mauronofrio said:
The battery capacity is 3630 and not 3000
Click to expand...
Click to collapse
I know, but Kernel Adiutor showing 3000 mah
LuigeUA said:
I know, but Kernel Adiutor showing 3000 mah
Click to expand...
Click to collapse
nubia ui stock also shows 3000. Do not worry about that.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP, for Android Pie we based on the "Ground Zero Open Source Project" (GZOSP), and now for Android 10 we are fully based on AOSP.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
Test builds: https://www.androidfilehost.com/?w=files&flid=302281
NOTE: Test builds are often those builds that I use personally. They tend to include open patches from our gerrit, and some additional changes documented here.
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
- Generating QR Codes for wifi sharing is broken (AOSP bug for devices without biometric sensors)
- You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android 10. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
0. Real recovery is recommended, it has been reported though that FOTA recovery might work too. There are issues with reboot to recovery with some recoveries (the TWRP linked here seems to work fine for me)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Flash the root solution of your choice (optional).
7. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
Currently supported Root Solution:
Magisk stable
Magisk versions >= 17.2 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_sony_msm8974/tree/q10.0
Device tree source:
https://github.com/AICP/device_sony_amami/tree/q10.0
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
NeoArian
rcstar6696
SuperLamic
AdrianDC
115ek
drakonizer
HazouPH
All the other contributors to sony msm8974 platform
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
Android Ice Cold Project (AICP) 15.0 (q10.0) amami (Sony Z1 Compact), ROM for the Sony Xperia Z1 Compact
Contributors
SpiritCroc
Source Code: https://github.com/AICP
ROM OS Version: Android 10
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked bootloader
Version Information
Status: Stable
Created 2019-11-18
Last Updated 2020-10-18
Reserved
Thank for this new ROM.
My remarks are ofc no complaints, only hints for other testers
Today I flashed AICP-q10.0_amami_20191118_1126.zip.
1. At every boot I get an error window:
"Android System: There is an internal problem with your phone."
2. With Magisk 20.1 I have root but the SafetyNet state is red
3. I flashed magisk-riru-core-v19.5.zip, but after flashing magisk-EdXposed-YAHFA-v0.4.5.1_beta.4463.-release.zip the phone does
no longer boot I had no time to search for a solution.
4. ExSDCard Access Enabler v3.5 is working, BusyBox for Android NDK v1.31.1 too.
5. I flashed a GAPPS (I found no other version) from here
https://www.cyanogenmods.org/downloads/nano-opengapps-for-android-10-arm32/
I could login at Google but I cannot download/sync my contacts or app updates.
The Playstore shows that the device is not certificated.
6: Camera is working but I found no possibility to store the pictures to the extSDCard.
Thank you very much for your work. It's excellent.
3. I flashed magisk-riru-core-v19.5.zip, but after flashing magisk-EdXposed-YAHFA-v0.4.5.1_beta.4463.-release.zip the phone does
no longer boot I had no time to search for a solution.
Click to expand...
Click to collapse
This is not the place for (ed)xposed related issues. See here for a solution:
https://forum.xda-developers.com/xposed/android-9-0-xposed-solutions-t3889513
hi
Camera button wake device not working.
Bluetooth find other phone but can't connected.
problem when I want to unlock the screen.
magisk 20.1 good worked.
gapp beta good worked.
Thank you for your work.
I pushed a new build since it's been some time since the last one (I've been quite busy with other things recently...).
There shouldn't be many changes from the device side, but there should be some updates and fixes to the framework which some of you might be interested in.
wi-fi does not work, without a SIM card can not connect to update over wi-fi.
sibor55 said:
wi-fi does not work, without a SIM card can not connect to update over wi-fi.
Click to expand...
Click to collapse
No, WiFi is fine here (2.4 and 5 GHz).
---------- Post added at 01:44 PM ---------- Previous post was at 01:34 PM ----------
SpiritCroc said:
I pushed a new build
Click to expand...
Click to collapse
Thank you very much.
1. Magisk SafetyNet-status is red
2. Google Play store: play protect-certificate is not certified.
I flashed ROM, GAPPS and Magisk several times (wiped all ofc).
The rest seams to be ok but I will continue only if these two problems are solved.
New build is up.
- Sony logo fixed
- enforcing sepolicy
- Fix for TWRP time included
SpiritCroc said:
New build is up.
Click to expand...
Click to collapse
Thank you.
SafetyNet in Magisk is green again
But the UI is very slow like in the last build too.
tramp20 said:
But the UI is very slow like in the last build too.
Click to expand...
Click to collapse
Sorry, problem was homemade
After a fresh installation (wipe all) it looks very good until now.
awesome
you keep this nice little phone alive
I've upgraded to AICP 15 and it's very stable, no problem until now, everything is working fine.
I think the battery is eaten a slighter more quickly than with AICP 14, but maybe I've not done a full setup of all the settings as it was in the previous version.
I just noticed a very very very small issue : the battery status of the BT device isn't shown (the parameter is correctly set).
Thanks a lot for all the work! :good:
Hi there, 2 questions if you dont mind hehe
1- About battery, which one has better performance, aicp android 7, 9 or 10 ?
2- Does anybody have the aicp android 7 ROM ?
Hy!
Wou, excelent work, it is great! Battery live in my Z1C is more better then Android 9, about 35 - 40 % better.
Official builds have started
Since I forgot to write here and some might have missed it: official AICP 15.0 builds have started for amami
(thanks to @tramp20 for reminding me)
SpiritCroc said:
official AICP 15.0 builds have started for amami
Click to expand...
Click to collapse
I assume I have to wipe all coming from AICP-q10.0_amami_20200226_0853?
tramp20 said:
I assume I have to wipe all coming from AICP-q10.0_amami_20200226_0853?
Click to expand...
Click to collapse
I think dirty flash should work, please report if it doesn't
SpiritCroc said:
I think dirty flash should work, please report if it doesn't
Click to expand...
Click to collapse
It worked but every app (incl. system ) needed 2-3 sec to start
So I did a full wipe and installed all again (ROM, Gapps, Magisk, Edxposed etc).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP, for Android Pie we based on the "Ground Zero Open Source Project" (GZOSP), and now for Android 10 we are fully based on AOSP.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
Test builds: https://www.androidfilehost.com/?w=files&flid=305060
Use castor for the LTE variant and castor_windy for the wifi-only variant.
Feedback from castor users, especially concerning mobile data, appreciated since I can only test on castor_windy.
NOTE: Test builds are often those builds that I use personally. They tend to include open patches from our gerrit, and some additional changes documented here.
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
- Unlocking the device does not work directly after boot (just wait around half a minute after bootanimation finished)
- Generating QR Codes for wifi sharing is broken (AOSP bug for devices without biometric sensor)
- FM Radio is somewhat slow
- wifi connection issues for some users, possibly region-specific
- You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android 10. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (latest TWRP from the CarbonROM thread recommended when coming from Android < 10, on Android 10 TWRP >= 3.3.1 recommended).
3. Wipe the System, Cache, Data and ART/Dalvik cache.
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Flash the root solution of your choice (optional).
7. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
Currently supported Root Solution:
Magisk stable
Magisk versions >= 17.2 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
OTA is only supported for official builds, which have not started yet.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_sony_msm8974/tree/q10.0
Device tree source:
https://github.com/AICP/device_sony_castor_windy/tree/q10.0
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
NeoArian
rcstar6696
AdrianDC
drakonizer
Myself5
All the other contributors to sony msm8974 platform
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
Android Ice Cold Project (AICP) 15.0 (q10.0) castor/_windy (Sony Z2 Tablet), ROM for the Sony Xperia Z2 Tablet
Contributors
SpiritCroc
Source Code: https://github.com/AICP
ROM OS Version: Android 10
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked bootloader
Version Information
Status: Testing
Created 2020-02-08
Last Updated 2020-10-18
castor / LTE device:
Thanks a lot for your newest build! :good:
I do not seem to have any issues except the old one that i've had on your aicp 14 about the charging, which i've hoped to get rid of on the newest version:
- even if "wake on plug" is deactivated, the display always turns on when connecting (but it does not turn on when disconnecting)
- when charged between about 89 - 92% the LED begins to blink irregulary, and after a short time the display always turns on, but the LED turns off, and it stops charging, and the display never switches off and i cannot switch it off by the on/off-button, it always tuns on again, as long as the device is connected by usb.
https://forum.xda-developers.com/search/thread/3884236?query=charging
Thank you so much!
So happy you didn't forget the old Castor for Q
I don't know if I'm allowed to say that or is it important or not and I think it isn't fixable but my problem about WiFi persists in Q.
As I said in P thread I think it's a problem with country code.
Original post is here: https://forum.xda-developers.com/showthread.php?p=79126115#post79126115
Thank you for your great work In Q rom it is so smooth by the way
I liked this aicp 15 rom and realized that the battery consumes a little bit fast, not to mention that it would be nice if this rom had a split screen mode in the configuration, just like the huawei tablet, it would be different from the other aicp earlier
Maristks said:
I liked this aicp 15 rom and realized that the battery consumes a little bit fast, not to mention that it would be nice if this rom had a split screen mode in the configuration, just like the huawei tablet, it would be different from the other aicp earlier
Click to expand...
Click to collapse
There is split screen mode, just press the app icon in recents and select split screen
testing AICP 15.0 Castor Windy
Hi,
Thanks for this. I've installed this on one of my Z2 tablets to compare. I mainly use it for news, weather and video sources like Netflix. Amazon Prime, Plex etc and Maps. So far it's great, everything is rock solid. I shall use this as a daily driver from now on.
Andy
Thanks for keeping this amazing tablet alive.
I have a problem with the rom in a castor windy. I can't connect to any wifi. It seems working fine, it shows all the networks. But when I type the password and press connect it says "error saving the network" and it does nothing.
Edit: Nevermind, I reflashed the rom and the wifi is working normal now. The rom so far so good, just missing the navigation bar gestures and style change.
Hello,
Just flashed yesterday night.
Working fine for the moment, very good work !
using it since a week on my castor ( LTE ) , so far no issues with mobile data or else
using the tablet daily with music apps ( spotify, youtube, amazon ) .. for games like BrownDust and for Streaming ( Crunchyroll / Vodafone and Netflix ) no issues so far
no problems with batterie usage or standby time .. its just perfect
thanks for this rom keep up your work
Has anyone tried if this ROM works well with NanoDroid or MicroG in general?
Thanks
I downloaded the ROM yesterday and made a clean installation of it. The constant reboot issue when the screen turns off is still there unfortunately, just like in the Android 9
I use the rom for a week and everything works fine, no reboots, no force closes.
On my Xperia z2 Tablet LIT it was good, but when it turns off and leaves charging off it doesn't turn on while the charger is connected, it stays with the infinite loop and only turns on by holding the volume button up and down + the off button to be able to turn on , I hope you keep updating this rom because I like the recent grid bar:fingers-crossed:
Ryū Kenden said:
Has anyone tried if this ROM works well with NanoDroid or MicroG in general?
Thanks
Click to expand...
Click to collapse
I'm using it with microg
Thank you very much
do you have a link to gaps
Rom installed yesterday + opengapps nano.
Blutooth, wifi, 4g working regular, good battery usage. One random reboot till now.
Thank you
twicko said:
Thank you very much
do you have a link to gaps
Click to expand...
Click to collapse
One second witch Google!!
https://opengapps.org/#downloadsection
New builds are up, now sepolicy is enforcing again
SpiritCroc said:
New builds are up, now sepolicy is enforcing again
Click to expand...
Click to collapse
Hi SpiritCroc, according to you, in term of ram and battery usage, this ROM how does compare to the 14.0 one? It's on the same level or there are still fixes and tweaks to be made?
Thank you for your work nonetheless.
Best regards.
Ryū Kenden said:
Hi SpiritCroc, according to you, in term of ram and battery usage, this ROM how does compare to the 14.0 one? It's on the same level or there are still fixes and tweaks to be made?
Thank you for your work nonetheless.
Best regards.
Click to expand...
Click to collapse
I usually don't look at these numbers, so if they aren't particularly bad, I don't notice. That said, for what I'm using it I don't have any complaints right now.
Apart from that, there are some small bugs like described in the first post, and looks like timekeep (remembering the time across reboots) broke in the latest build, which I'm debugging right now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we was based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
For Android 10 we are now full AOSP-based.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Download-Links:
ROM: https://dwnld.aicp-rom.com/
TWRP: https://dl.twrp.me/m7/
GAPPS: https://opengapps.org/?arch=arm&api=10.0
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
What's working
-wifi
-mobile data
-camera
-bluetooth
-audio
-gps
What's not working
- camcorder - please use Footej for now, will fix later
- FM Radio
FAQ:
Before using the ROM:
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet released for Pie, however you can try to use edxposed .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Pie. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk canary
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_htc_msm8960
Device tree source:
https://github.com/AICP/device_htc_m7
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds[/B]
Contributors:
@Claymore1297
@ThE_MarD
@tarkzim
special thanks to:
@root_export
@k4y0z
and very, very special thanx to @mosimchah
The following information is ONLY needed if you are not opening up a devdb thread on XDA!
ROM OS Version: 10.0 Android 10
Kernel: Linux 3.4.x
Requirements
TWRP: 3.3.1
Version Information:
Status: BETA
Release Date: 29-04-2020
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
AICP 15.0, ROM for the HTC One (m7)
Contributors
Claymore1297, ThE_MarD
ROM OS Version: Android 10
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2020-04-29
Last Updated 2020-05-09
CamCorder-Bug:
to use the camcorder playe install Footej.apk, which you can download from ROM URL.
What's this? A 2nd Android Q ROM for an age old device? This is really cool. Thanks dev!
Replaced the build with some minor bugfixes.
Enjoy!
thanks, but i tested your rom there is some bugs i don't know if fixed it yet:
1- can't connect to hidden wifi.
2-can't show pictures in studio.
3- flash running for 2 sec then it turnoff.
thank you . and good luck
Bashar Mohamad said:
thanks, but i tested your rom there is some bugs i don't know if fixed it yet:
1- can't connect to hidden wifi.
2-can't show pictures in studio.
3- flash running for 2 sec then it turnoff.
thank you . and good luck
Click to expand...
Click to collapse
make sure, you have latest HTC firmware installed. Flash confirmed - will check this.
Wifi connection is not very good, but had this too on Stock.
And please make sure, you use the latest build - this might be the 2. issue you have.
EDIT: next build will have torch issue fixed
Everything is working except the torch,and there's no any customization for hw bottons.
AsrielDash said:
Everything is working except the torch,and there's no any customization for hw bottons.
Click to expand...
Click to collapse
you will receive today an build with torch fixed.
There are a lot customizations in AicpExtras app, even hw buttons
If everything is working, I plan to make if official ...
Claymore1297 said:
you will receive today an build with torch fixed.
There are a lot customizations in AicpExtras app, even hw buttons
If everything is working, I plan to make if official ...
Click to expand...
Click to collapse
Looking forward to seeing it become official
As for hw buttons,I was talking about back and home button,there are only customizations for volume and power buttons.
#### New build is up!! ####
the build is containing mainly the following:
-torch fixed
-minor fixes
-SELinux enforcing
-added CPU+Battery temperate in quick settings
* this is the first build with SELinux enforce, so if you have any weired issues, send me log - it's probably SELinux related
Enjoy!
Claymore1297 said:
#### New build is up!! ####
the build is containing mainly the following:
-torch fixed
-minor fixes
-SELinux enforcing
-added CPU+Battery temperate in quick settings
* this is the first build with SELinux enforce, so if you have any weired issues, send me log - it's probably SELinux related
Enjoy!
Click to expand...
Click to collapse
hi, i tested it. torch fixed and every thing i tested working good but i got random reboot .Also I couldn't adjust the screen back light.
I hope you fix that. and add root to your next build.
thanks you.
Bashar Mohamad said:
hi, i tested it. torch fixed and every thing i tested working good but i got random reboot .Also I couldn't adjust the screen back light.
I hope you fix that. and add root to your next build.
thanks you.
Click to expand...
Click to collapse
Root is only available via magisk. Can you describe your issue with screen back?
We have now Official State.
First WEEKLY will be available on Wednesday.
A experimental build is available on official download page - which you can install too.
You can just simple dirty flash the upcomming WEEKLY build and then you can install via OTA app.
Enjoy!
I can't beileve this. I came here just to check the original HTC Camera apk and bum! a second Android 10 based ROM. I'm happy as **** ??
---------- Post added at 13:55 ---------- Previous post was at 13:52 ----------
Just a question. Would it be possible to make this ROM SafetyNet compatible?
rasikreality said:
I can't beileve this. I came here just to check the original HTC Camera apk and bum! a second Android 10 based ROM. I'm happy as ****
---------- Post added at 13:55 ---------- Previous post was at 13:52 ----------
Just a question. Would it be possible to make this ROM SafetyNet compatible?
Click to expand...
Click to collapse
not sure, if you can pass SafetyNet otherwise you should hide with Magisk - but I I've not tested this.
I've found a bug!
When I activate developer options, phone gets into a bootloop and it's unusable unless you make a factory reset on TWRP. I have the latest firmware and TWRP, I'm S-OFF and my GApps are the mini package. I love this ROM, so I've decided to power off my M7 and wait until it becomes stable.
Good work!
rasikreality said:
I've found a bug!
When I activate developer options, phone gets into a bootloop and it's unusable unless you make a factory reset on TWRP. I have the latest firmware and TWRP, I'm S-OFF and my GApps are the mini package. I love this ROM, so I've decided to power off my M7 and wait until it becomes stable.
Good work!
Click to expand...
Click to collapse
I have developer option always activated and don't have this... So must be something different. A log would be useful
Edit: make sure you have the latest build running. I think my very first build had an issue in developer options
next / first WEEKLY build will include FastCharge an a toggle in Additional Device Settings for enable/disable....
Claymore1297 said:
Root is only available via magisk. Can you describe your issue with screen back?
Click to expand...
Click to collapse
couldn't adjust brightness .it didn't work ,i mean from quick setting, there no change if you slide it right or left .
I'm waiting for official build. Thanks
Great rom !!!
But i am having problems with my bluetooth headset.
When I call, people don't hear me.
Echo and loud noise.
Calling with telephone and calling with speaker are good.
Sorry for my bad english
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-R with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 16.1
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Camera mods are not and will not be supported
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Does this ROM include GApps or do I have to flash them separately?
A. No, we do not include prebuilt GApps, because of possible licensing issues with Google Software and because some users do not want GApps preinstalled as they want to use alternative services like MicroG or just prefer flashing a GApps "flavor" of their liking.
Q. Does this ROM use the camera or gallery app from stock?
A. It depends on the device. In most cases these apps include proprietary libs/code and cannot be included in the device trees on Github or we risk having the ROM banned from Github. In this case, we might try to make them installable (separate from the ROM zip), or we might provide a version of these apps with the ROM that doesn't include any proprietary libs. It's also sometimes the case that these apps are simply not included because we didn't feel the need to do so for the device in question.
Q. Does this ROM have Extended/Scrolling screenshot?
A. No, extended screenshot was implemented using an app extracted and modified from manufacturer firmware/system images and is proprietary as well. It led to the closing of many ROM's sources on GitHub.
Q. Does this ROM have FaceUnlock?
A. No, FaceUnlock was also an app extracted and modified from some manufacturers. Even Google removed the Trusted Face (FaceUnlock) feature for security reasons on Android 9.0/10.x. Adding the modified feature did the same to ROM sources as described above.
Q. Can you add (insert favorite weather provider)?
A. No, we cannot add more weather providers as the implementations change and we (the ROM) now have to pay for most services, and that is not cheap, so we decided to use the best free service that we could find, the only way to add your own is for users to apply for their own API key to use their preferred service.
Q. Does this ROM have private official builds with the above proprietary libs included?
A. No, we believe in open source software, this way users know what's in the build and can replicate it themselves, all official builds are built on our build servers using the public sources from github and no one can (or would) add their own private sources to the build.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behavior on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache, and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android R. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM zip file.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work)
6. Reboot and set up your device, enable developer settings and in them, OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.4 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices, you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
GitHub - AICP/kernel_motorola_msm8953 at r11.1-albus
Contribute to AICP/kernel_motorola_msm8953 development by creating an account on GitHub.
github.com
Device tree source:
https://github.com/AICP/device_motorola_addison/tree/r11.1Vendor source:
Follow this guide if you want to extract the vendor blobs
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
erfanoabdi, npjohnson, jeferson1979, jarlpenguin,alberto97
Information:
ROM OS Version: 11.x
Kernel: Linux 3.18.140
ROM Firmware required: ADDISON_OPNS27.76
Status: STABLE
Release Date: 19-12-2021
You want to see a "normal" night at the "DEV office", click here!!
19-12-2021: Initial release
solved, ask me for unlock code...
i forget format data....
Thx
Running on android 11 Now!!!
Thx!!!!!!
Thanks for the oficial release. Working fastest.
Running in XT 1635-02 with Nano Gapps
Greeting from Brazil
Reported random reboots and sound is too loud and burst. But in AOSP this problem does not appear. I'm not sure if the random reboots part has to do with the AICP, I brought my cell phone in for assistance today, battery was changed. But on AOSP the sound was normal. I'll test for more days and send a logcat.
Good customizations and performance. Free ram at 800-1300mb. Screens of the ROM:
BloodyPorra said:
Reported random reboots and sound is too loud and burst. But in AOSP this problem does not appear. I'm not sure if the random reboots part has to do with the AICP, I brought my cell phone in for assistance today, battery was changed. But on AOSP the sound was normal. I'll test for more days and send a logcat.
Click to expand...
Click to collapse
Can you get me a log for the crashes? I'll investigate the audio too, but a more detailed description would help
marcost22 said:
Can you get me a log for the crashes? I'll investigate the audio too, but a more detailed description would help
Click to expand...
Click to collapse
In AOSP (arm64) rom my speaker is not that loud. But in AICP i listening noise in full volume and popping sound. After install Magisk my sound is very low and solved this, but this problem comming back and sound is loud again. After shake my phone for flashlight my phone reboots. Follow the matlog:
BloodyPorra said:
In AOSP (arm64) rom my speaker is not that loud. But in AICP i listening noise in full volume and popping sound. After install Magisk my sound is very low and solved this, but this problem comming back and sound is loud again. After shake my phone for flashlight my phone reboots. Follow the matlog:
Click to expand...
Click to collapse
I can see some things that might cause that audio issue; altho it's weird that i cant notice it; it might just be the opalum speaker protection being all wonky.
You are gonna have to get me a console-ramoops from after the reboot, just pull /sys/fs/pstore, because those have no info for me
I even have a XT1635-02 myself as my test device, the only thing different is that i have an ever so slightly newer firmware version; M8953_10238.63.04.83R vs M8953_10238.63.04.83.01R on mine
Sound is low and fixed and back again very loud with noise, distortion and popping. After notification in whatsapp. Ok i want to check this.
(Edit):
console-ramoops isn't available after kernel panic
Here for you
BloodyPorra said:
Here for you
Click to expand...
Click to collapse
nothing, you might have to take the logcat with a pc and then trigger the flashlight to see if the issue pops up
marcost22 said:
nothing, you might have to take the logcat with a pc and then trigger the flashlight to see if the issue pops up
Click to expand...
Click to collapse
CPU Shutdown if i shake my device for flashlight or not. How to take a logcat with my notebook?
I take the logcat in ADB after shake several times my device is shutdown again, but only the last line appears:
Code:
12-21 10:21:44.628 0 0 I : [ 1520.174098,4] motosh 4-0043: Sending disp_rotate(x)value: 0
you start adb logcat -b all > log.log and then after a couple of seconds you shake the device
marcost22 said:
you start adb logcat -b all > log.log and then after a couple of seconds you shake the device
Click to expand...
Click to collapse
after several times shutdown
Thanks for your hard work dude
BloodyPorra said:
after several times shutdown
Click to expand...
Click to collapse
can't see anything wrong at first glance; will take a better look tomorrow
rogerpinkos said:
Thanks for your hard work dude
Click to expand...
Click to collapse
in my device i tested games like a Mobile Legends and COD i have a fastest perfomance, system is fluid and lag free. big different when i using arm or arm64 pie roms
marcost22 said:
can't see anything wrong at first glance; will take a better look tomorrow
Click to expand...
Click to collapse
i was to test dolby atmos or viper for sound fix and change CPU governor and I/O for tests.