Related
My setup:
4.4.4 GPE ROM
Nova launcher
Motion Launch disabled in general ROM settings
LMT with Pie controls as the only active feature
GravityBox configured to disable the navigation bar
Kernel Manager configured with Swipe2Wake disabled
My Issue:
When I swipe left along the bottom of the screen it puts the phone to sleep.
This wouldn't be to much of an issue but since my Nova dock now sits at the bottom of the screen since the nav buttons are disabled I'm accidentally putting it to sleep while swiping thru my docks.
Am I missing a setting somewhere that is keeping this swipe to sleep functionality enabled? Is there another app I can install to disable this swipe2sleep feature perhaps?
Any help/advice would be greatly appreciated. Thanks!
I'm using Clean ROM when Sweep2Sleep and I haven't found a way to disable it. However, I like having it, but in your situation, I can see why you would want to turn it off. My motion gestures are also turned off, I'm pretty S2S isn't tied into those.
Sent from my HTC6525LVW using Tapatalk
RikRong said:
I'm using Clean ROM when Sweep2Sleep and I haven't found a way to disable it. However, I like having it, but in your situation, I can see why you would want to turn it off. My motion gestures are also turned off, I'm pretty S2S isn't tied into those.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Figured it out.. found the answer buried on page 241 of the ROM thread (http://forum.xda-developers.com/showthread.php?p=54199293&highlight=sweep#post54199293)
Just had to modify the Sweep2sleep section in the init.d file as it was set to 2 by default. uncommented it to 0 and it's now disabled.
Hi all.
OnePlus Night mode is a bit off the standard as some of us have been reporting for a long time.
I have been struggling with it since day one. To green (i see a lot of users saying to yellow) for me.
This does not Fix the One Plus Night Mode, it adds a new QS Tile you can use instead.
With this new QS Tile you will get the Amber Night Mode you see on AOSP Roms.
Root is mandatory.
You need a kernel with Kcal support (If you know me you know what i use already, if not it's on my Signature, if you are on XDA Labs and can't see it i always use blu_spark kernel).
Kernel Adiutor is not mandatory but is the app i use to check if it's all as should be.
QuickTile Quick Settings 7+ is the app i use for the "new" Night Mode QS Tile.
Now the fun:
Open Quick Tile and give the App root permissions when asked.
1 - Change the QS icon to the White half Moon icon, Change the name to Night Mode (The icon and name can be adjusted to your personal taste)
2 - Click the "+" button, select "LAB", select "send ROOT Shell command and insert:
Code:
echo '256 256 256' > /sys/devices/platform/kcal_ctrl.0/kcal
Hit OK, this is the normal state of QS Tile (disabled state).
3 - Hit the "Gear icon" and choose Add Cycle (Previous state will vanish, we are now making the enabled Night mode state of the same QS Tile)
4 - Change the QS icon to the Grey half Moon icon, Change the name to Night Mode (The icon and name can be adjusted to your personal taste)
5 - Click the "+" button, select "LAB", select "send ROOT Shell command and insert:
Code:
echo '256 155 61' > /sys/devices/platform/kcal_ctrl.0/kcal
Hit OK, this is the actual Night Mode state of QS Tile (enabled state).
6 - Hit the "Play button" to see the night mode Kick in.
7 - Go to your QS, edit them and add the new Night Mode QS Tile you just created to the QS panel. You can ditch the old one.
All done. Enjoy the Night mode on OOS as it should have been implemented in the first place.
This works on Stable and OB OOS. You need to disable the automatic Night Mode if you are on OB or it will override this one.
OP3/3T are on par on such matter, it works for both devices.
Nice, will give it a try. I also dont understand what was oneplus idea by adding this greenish night mode. It hurts my eyes and i never use it
Thanks for this!
I noticed with ex kernel manager that each switch between regular and nightmode will increase the values for "value" and "contrast" by one step.
Depending on how often you do this, the colors will look noticeably different eventually.
AcmE85 said:
Thanks for this!
I noticed with ex kernel manager that each switch between regular and nightmode will increase the values for "value" and "contrast" by one step.
Depending on how often you do this, the colors will look noticeably different eventually.
Click to expand...
Click to collapse
I have tested it quite extensively with Kernel Adiutor.
Can't seem to reproduce it.
127 is the value for both "value" and "contrast" on both Night Mode and Stock Mode.
Try to disable ExKernel Manager and use KA to check after a few ON/OFF cycles of Night Mode.
The only parameter of Kcal I touch with those commands is "Screen color" which changes RGB.
They cycle as supposed on my end.
Other values are untouched and are reported as untouched on Kernel Adiutor App.
Feel free to give me feedback on this matter. I find that a bit strange.
@Chaplan
Works great with EX kernel and OB14 on OP3. Thanks for this. :good:
Edit: Also configured Tasker for automatic Night Mode
Hey just followed your tutorial and created the tile and tested with play button but I am unable to add the tile to the qs panel. I am able to drag the 'Quicktile' tile to half way and it disappears. Not sure it's rom issue or app. So can you help me out?
sai444 said:
Hey just followed your tutorial and created the tile and tested with play button but I am unable to add the tile to the qs panel. I am able to drag the 'Quicktile' tile to half way and it disappears. Not sure it's rom issue or app. So can you help me out?
Click to expand...
Click to collapse
It's pretty straight forward.
Never encountered that issue.
Try to add it to the middle panel and then to the top panel where the QS Tiles get activated.
Also giving auto start permissions to the app and removing it from agressive Doze and app hibernation list will make it perform on an immediate basis when the QS is pressed.
Chaplan said:
It's pretty straight forward.
Never encountered that issue.
Try to add it to the middle panel and then to the top panel where the QS Tiles get activated.
Also giving auto start permissions to the app and removing it from agressive Doze and app hibernation list will make it perform on an immediate basis when the QS is pressed.
Click to expand...
Click to collapse
Tried them and still doesn't work. But thinking that I am using ozone substratum theme for 4QS tiles. This might be the reason for not able to add tiles.?
Will check that also.
Thank you for the response:good:
I wanted to set exceptions for do not disturb mode for calls/messages from my family AND alarms. The alarms toggle is grayed out under "custom" exceptions settings. I don't want alarms only, I want alarms and favorite contacts. Any ideas? (VZW - S8+)
It is grayed out because in custom mode alarms are always allowed. I use custom mode and my alarm wakes me up every morning.
You can try it for yourself. Set DND to custom and turn it on, then set an alarm for one minute from now. The alarm will sound.
If you see my picture, it's grayed out in the off position. After a reboot, it's now grayed out in the on position. All is well, thanks.
Sent from the Galaxy (S8+)
Didn't work for me
Did that actually work for you? Mine is greyed out in the on position as well but the alarm appears on the screen and still won't sound out loud when in do not disturb custom mode
Mine has always worked fine, then randomly yesterday evening I got a notification that do not disturbed activated and alarms are silenced.
No matter what I do, how many times I restart I cant get the alarms to be greyed out in the on position while using custom settings.
Anyone ever find a solution to this? Just realized mine had started doing the same after a missed alarm yesterday.
My note is doing the same thing now. alarms used to work fine on Do Not Disturb, but not anymore. I am with Verizon
I still get alarms sounding in custom DND mode. Which alarm app are you using? (I'm using the default.) Is your alarm app set for Priority Notifications?
My Galaxy S8+ just started doing this too. I recall that the alarm selection was not previously in the off position. Now it is and my alarm will not sound in do not disturb mode.
---------- Post added at 07:25 PM ---------- Previous post was at 06:56 PM ----------
I checked my wife's phone and the alarm toggle is greyed out as well however it is in the on position.
I suspect that Android Auto is causing the problem. It forces the toggle to the OFF position somehow.
Are you guys using Android Auto or similar apps that toggles the DND mode?
You might just be on to something.
I use Android Auto quite a bit and I noticed that again the alarms slider is switched off.
Android Auto IS the cause!
I have been using the Do Not Disturb mode with custom notifications since I got my S8+ several months ago. The alarms we're always toggled on. Two days ago I installed Android Auto, the morning after I installed it was the first time my alarm did not go off. As soon as I saw the mention of Android Auto, in this forum, I said "aha!" Rebooting my phone fixed the alarm issue for the moment. Hopefully, I will not need to reboot my phone every night after using Android Auto.
Turn alarm on in do not disturb mode
To make sure your alarm works in do not disturb mode: go to sounds and vibration, click on do not disturb enable as scheduled, click on allow exceptions, click on priority app notifications, turn on the clock app as a priority app notification.
mhounjet said:
To make sure your alarm works in do not disturb mode: go to sounds and vibration, click on do not disturb enable as scheduled, click on allow exceptions, click on priority app notifications, turn on the clock app as a priority app notification.
Click to expand...
Click to collapse
I've tried that. It doesn't work.
Opposite problem
I have custom exceptions set so that when do not disturb is scheduled at night, that my boss and employees can still call me. When I am at the theater and I manually select do not disturb, I really do not want an alarm going off. I discovered the hard way that they still do.
This is still a bug with Android Auto 2 years on ?*
I use my phone to read in bed at night. I have two questions.
Does anyone know how I can disable the charging LED?
Does anyone know of a way to increase the intensity of night mode beyond the stock settings?
If it helps I have Xposed and magisk. Oh also, I would prefer not to use gravity box for Oreo, as it seems to mess up some things with the status bar.
I want to do this too , I don't understand why there isn't an option to turn it off.
I downloaded Lightmanager and lightflow to try and turn it off, unfortunately didn't work.
Same. Sure wish at least the LED brightness could be controlled.
With lightning manager, config the color with 000001 (it doesn't work with 000000)
Only way is to turn off LED for all.
Settings > Display>Blink LED
For those who were interested, I solved this by using the app Light Flow.
I use tasker to do this and the secure settings plugin. In the secure settings plugin I run the following script:
settings put system battery_charging_led 0
This will only disable the charging led. Change the 0 for a 1 to turn it on again.
Hexyl said:
I use tasker to do this and the secure settings plugin. In the secure settings plugin I run the following script:
settings put system battery_charging_led 0
This will only disable the charging led. Change the 0 for a 1 to turn it on again.
Click to expand...
Click to collapse
Does this still work for you on latest Android?
It works on Lineage Android 9 on OnePlus 3T.
Thank you!
I've been using a Lineage PIE ROM on my OPO for months and the heads up notification toggle was a tile.
Can't find anywhere to disable it on this OP7 Pro.
Is it possible?
+1, can't wait to get rid of it
Sent from my GM1915 using Tapatalk
Ruggerxpunk said:
I've been using a Lineage PIE ROM on my OPO for months and the heads up notification toggle was a tile.
Can't find anywhere to disable it on this OP7 Pro.
Is it possible?
Click to expand...
Click to collapse
I actually have been disabling them with adb on my past 3-4 devices. But with the 7 pro, if you disable heads up, you won't receive notifications at all when screen is off (unless there is sound)
Also just discovered this, I had my animations turned off and my horizon light didn't work. Randomly turned them on today and what do you know... Animations off = no horizon light.
Not sure what OP is doing to notifications...
Okay so I found no tile but if you switch to Do not Disturb Mode you can deactivate them.
Go into settings->do not disturb->notifications->custom
It's not as efficient as the tile but it works. And I guess with the alert slider it's at least manageable since you can switch pretty easily
---------- Post added at 11:09 PM ---------- Previous post was at 11:05 PM ----------
I actually have been disabling them with adb on my past 3-4 devices. But with the 7 pro, if you disable heads up, you won't receive notifications at all when screen is off (unless there is sound)
Also just discovered this, I had my animations turned off and my horizon light didn't work. Randomly turned them on today and what do you know... Animations off = no horizon light.
Not sure what OP is doing to notifications...
Click to expand...
Click to collapse
It seems if you do it with the method mentioned above you can have the screen turn on and no pop up for notifications
Tottie said:
Okay so I found no tile but if you switch to Do not Disturb Mode you can deactivate them.
Go into settings->do not disturb->notifications->custom
It's not as efficient as the tile but it works. And I guess with the alert slider it's at least manageable since you can switch pretty easily
---------- Post added at 11:09 PM ---------- Previous post was at 11:05 PM ----------
It seems if you do it with the method mentioned above you can have the screen turn on and no pop up for notifications
Click to expand...
Click to collapse
These are my settings but the pop ups still occur.
If that doesn't work the only other idea I have is misusing game mode..
Obviously it's not really that usable for games then anymore
I use Tasker for this.
rickysidhu_ said:
I use Tasker for this.
Click to expand...
Click to collapse
Is there a profile you can share?
There are apps that can help with this.
I use Shortcutter, works with root and non root via adb.
Ruggerxpunk said:
Is there a profile you can share?
Click to expand...
Click to collapse
I use the AutoTools plugin for this, see attached screenshot.
rickysidhu_ said:
I use the AutoTools plugin for this, see attached screenshot.
Click to expand...
Click to collapse
Do notifications still come through on Ambient Display on this?
Tried the same adb command and it broke Ambient Display, worked fine on 6T tho
Connect the device via ADB and run the following command from a command prompt on your computer:
adb shell settings put global heads_up_notifications_enabled 0
That disables heads up notifications only
dr_rick13 said:
Do notifications still come through on Ambient Display on this?
Tried the same adb command and it broke Ambient Display, worked fine on 6T tho
Click to expand...
Click to collapse
I'm not too sure about that actually, haven't really paid attention to ambient display with this setting enabled.
My use case is to disable these notifications only when in certain apps (YouTube, Netflix). As soon as Ieave these kinds of apps, heads up notifications will enable again.
You can try adding a screen state context, so ensure that %SCREEN = on, else enable heads up notifications to ensure ambient display notifications work.
Just do it in adb. One command and it's off. Still get notifications and dots. And sounds. Just no heads up. Works perfectly...
adb shell settings put global heads_up_notifications_enabled 0