Database Info

FRD-AL10 / Full Stock Rom needed

Hey Guys,
can somebody upload a full-zip from Honor FRD-AL10.
I damaged my micro-SD and lost all my backups.
Actually I am on FRD-AL10C00B135.
I know there is B136 available, but I don't get it offer.
Also I found out, other things are not working well.
I would like to do a full reset, which won't work via erecovery.
Thanks a lot for help!

[email protected] said:
Hey Guys,
can somebody upload a full-zip from Honor FRD-AL10.
I damaged my micro-SD and lost all my backups.
Actually I am on FRD-AL10C00B135.
I know there is B136 available, but I don't get it offer.
Also I found out, other things are not working well.
I would like to do a full reset, which won't work via erecovery.
Thanks a lot for help!
Click to expand...
Click to collapse
http://pan.baidu.com/share/home?uk=403023305#category/type=0
Sent from my HUAWEI VIE-L29 using XDA Labs

Baidu is full of bloatware and b*s, I have uploaded this file to Mega, hope this is the one you are looking for.
FRD-AL10_C00B135_Firmware_China_Nonspecific_Android 6.0_EMUI 4.1_05013LBP.zip
https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ

jerryhou85 said:
Baidu is full of bloatware and b*s, I have uploaded this file to Mega, hope this is the one you are looking for.
FRD-AL10_C00B135_Firmware_China_Nonspecific_Android 6.0_EMUI 4.1_05013LBP.zip
https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ
Click to expand...
Click to collapse
Many thanks.
This helped me!
Baidu die Not Start my download, yesterday.

[email protected] said:
Many thanks.
This helped me!
Baidu die Not Start my download, yesterday.
Click to expand...
Click to collapse
Baidu is notorious for its download software for big files. If you have problems with that, you can install Firefox and a plugin called User Agent Switch, switch your Firefox user agent to IE3.0 and visit baidu again, then you can use download software, like IDM to download big files freely, without its b*s download manager...

jerryhou85 said:
Baidu is full of bloatware and b*s, I have uploaded this file to Mega, hope this is the one you are looking for.
FRD-AL10_C00B135_Firmware_China_Nonspecific_Android 6.0_EMUI 4.1_05013LBP.zip
https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ
Click to expand...
Click to collapse
Hi,
I am not a dev and my knowledge on flashing and rooting is only from reading posts. Can I ask for a little advice and maybe instructions? Is it possible the rom from link can help with my situation described below?
I bought honor 8 frd al10 from china. The sim doesn't initiate. I firstly loaded android wear from play store to pair with my Huawei Watch. A message popped up saying 'this phone was flashed with unsupported config for companion. you must reflash it as either signed/user or unsigned/userdebug'. I tried to get help from seller but that's no use and they referred me to xda. They say my rom is EU. In the settings, the build is FRD-C900B120. IMEI and MEID are showing as unknown. There is no Baseband version showing. I am not an expert but I know this ain't right. After watching some of the videos, I used ADB to get to fastboot. It says device unlocked. This is where i get stuck and don't know what else to do. I simply want this phone to work as it is intended to. Help, please.
Edit: I forgot to add that reset to factory settings does not work. goes to 13% and says failed.
Also, when I type in a code in dialler to get product ID to get bootloader unlock code from Huawei, nothing happens so I am stuck if the bootloader is not unlocked.
There is no OEM unlock option in the dev options.

ptwarecki said:
Hi,
I am not a dev and my knowledge on flashing and rooting is only from reading posts. Can I ask for a little advice and maybe instructions? Is it possible the rom from link can help with my situation described below?
I bought honor 8 frd al10 from china. The sim doesn't initiate. I firstly loaded android wear from play store to pair with my Huawei Watch. A message popped up saying 'this phone was flashed with unsupported config for companion. you must reflash it as either signed/user or unsigned/userdebug'. I tried to get help from seller but that's no use and they referred me to xda. They say my rom is EU. In the settings, the build is FRD-C900B120. IMEI and MEID are showing as unknown. There is no Baseband version showing. I am not an expert but I know this ain't right. After watching some of the videos, I used ADB to get to fastboot. It says device unlocked. This is where i get stuck and don't know what else to do. I simply want this phone to work as it is intended to. Help, please.
Edit: I forgot to add that reset to factory settings does not work. goes to 13% and says failed.
Also, when I type in a code in dialler to get product ID to get bootloader unlock code from Huawei, nothing happens so I am stuck if the bootloader is not unlocked.
There is no OEM unlock option in the dev options.
Click to expand...
Click to collapse
It looks like your phone and your ROM are in some twisted status: they are not match.
If you really use AL10 from China, there is a method to fully restore your phone to original status (AL10 original ROM). But I have to remind you the risk first, backup all your contacts to PC/GoogleContacts/Exchange before you proceed.
If you are ready, go to this post below, follow the instructions on 2nd post.
http://forum.xda-developers.com/honor-8/help/honor-8-rooted-twrp-modaco-rom-unable-t3462039
1. Download AL10 stock rom from my Mega link.
2. Extract necessary files using method above.
3. Follow the rest of instructions.
Now you fully go back to Stock AL10 phone as when it was sold in China and you can start to work from there.
If you don't like China stock ROM, what you can do is Debrand/Rebrand your phone which means, in simple, you change some parameters in your phone, to let your phone and ROM thinks it is from some other region, like EU/ME.
You can find details about Debrand/Rebrand method and video guide in following 2 posts:
http://forum.xda-developers.com/honor-8/development/tool-srk-tool-huawei-bootloader-root-t3470823
http://forum.xda-developers.com/honor-8/how-to/vdo-guide-unlock-bootloader-twrp-root-t3472584

jerryhou85 said:
It looks like your phone and your ROM are in some twisted status: they are not match.
If you really use AL10 from China, there is a method to fully restore your phone to original status (AL10 original ROM). But I have to remind you the risk first, backup all your contacts to PC/GoogleContacts/Exchange before you proceed.
If you are ready, go to this post below, follow the instructions on 2nd post.
http://forum.xda-developers.com/honor-8/help/honor-8-rooted-twrp-modaco-rom-unable-t3462039
1. Download AL10 stock rom from my Mega link.
2. Extract necessary files using method above.
3. Follow the rest of instructions.
Now you fully go back to Stock AL10 phone as when it was sold in China and you can start to work from there.
If you don't like China stock ROM, what you can do is Debrand/Rebrand your phone which means, in simple, you change some parameters in your phone, to let your phone and ROM thinks it is from some other region, like EU/ME.
You can find details about Debrand/Rebrand method and video guide in following 2 posts:
http://forum.xda-developers.com/honor-8/development/tool-srk-tool-huawei-bootloader-root-t3470823
http://forum.xda-developers.com/honor-8/how-to/vdo-guide-unlock-bootloader-twrp-root-t3472584
Click to expand...
Click to collapse
Wow. First of all, thank you kindly. Looks like a load of work. I will try it and I really appreciate your help and your time.
The device is AL10 as per box/back of the device itself. There is nothing on this phone I would care to loose. Its like this straight out of the box. I don't mind what software I am using as long as I can make calls, use internet, pair my watch, download apps from play store (i understand this may be the issue with Chinese rom). I think what seller was intending to do is the debranding to make it EU.
If you don't mind, I will contact you (quote) if I encounter issues on the way.

ptwarecki said:
Wow. First of all, thank you kindly. Looks like a load of work. I will try it and I really appreciate your help and your time.
The device is AL10 as per box/back of the device itself. There is nothing on this phone I would care to loose. Its like this straight out of the box. I don't mind what software I am using as long as I can make calls, use internet, pair my watch, download apps from play store (i understand this may be the issue with Chinese rom). I think what seller was intending to do is the debranding to make it EU.
If you don't mind, I will contact you (quote) if I encounter issues on the way.
Click to expand...
Click to collapse
Most HUAWEI's phones come with Google Play Services installed, what you need is Google Play Store, if I didn't remember it wrong.
From what I read, a proper debrand should never put your phone in a mess up status, but I haven't done that myself. If you can take time, maybe can study that SRK tool and debrand it yourself. Anyway, now you know you will have the final restore weapon.

jerryhou85 said:
It looks like your phone and your ROM are in some twisted status: they are not match.
If you really use AL10 from China, there is a method to fully restore your phone to original status (AL10 original ROM). But I have to remind you the risk first, backup all your contacts to PC/GoogleContacts/Exchange before you proceed.
If you are ready, go to this post below, follow the instructions on 2nd post.
http://forum.xda-developers.com/honor-8/help/honor-8-rooted-twrp-modaco-rom-unable-t3462039
1. Download AL10 stock rom from my Mega link.
2. Extract necessary files using method above.
3. Follow the rest of instructions.
Now you fully go back to Stock AL10 phone as when it was sold in China and you can start to work from there.
If you don't like China stock ROM, what you can do is Debrand/Rebrand your phone which means, in simple, you change some parameters in your phone, to let your phone and ROM thinks it is from some other region, like EU/ME.
You can find details about Debrand/Rebrand method and video guide in following 2 posts:
http://forum.xda-developers.com/honor-8/development/tool-srk-tool-huawei-bootloader-root-t3470823
http://forum.xda-developers.com/honor-8/how-to/vdo-guide-unlock-bootloader-twrp-root-t3472584
Click to expand...
Click to collapse
I am either doin something wrong or this is not fixable.
I've tried and force update by putting update.app into dload on internal storage on phone. updating stopped after 3 % failed and asked to reboot.
I've tried reboot in bootloader and in adb typed 'fastboot flash recovery recovery.img' which i first extracted from update.app. I get: sending recovery OKAY, writing recovery FAILED <remote: command not allowed>

ptwarecki said:
I am either doin something wrong or this is not fixable.
I've tried and force update by putting update.app into dload on internal storage on phone. updating stopped after 3 % failed and asked to reboot.
I've tried reboot in bootloader and in adb typed 'fastboot flash recovery recovery.img' which i first extracted from update.app. I get: sending recovery OKAY, writing recovery FAILED <remote: command not allowed>
Click to expand...
Click to collapse
It feels like your phone is not properly unlocked or somehow relocked, maybe you should try to unlock your phone again.
Here is the post for your reference:
http://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946
You may have troubles in finding these in your phone according to your previous post, try the code below.
1. Your phone serial number (this can be found in Settings -> About -> Status)
open dial pad and enter *#*#2846579#*#*, should be some options called "board basic info", and then "others" (I translate from Chinese website, maybe not accurate)
Click to expand...
Click to collapse
2. Your phone IMEI1 (this can be found in Settings -> About -> Status)
*#06#, if you have dual sim, key in main IMEI/MEID
Click to expand...
Click to collapse
3. Your phone product ID (to find this, open the dialler and enter *#*#1357946#*#*)

jerryhou85 said:
It feels like your phone is not properly unlocked or somehow relocked, maybe you should try to unlock your phone again.
Here is the post for your reference:
http://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946
You may have troubles in finding these in your phone according to your previous post, try the code below.
1. Your phone serial number (this can be found in Settings -> About -> Status)
2. Your phone IMEI1 (this can be found in Settings -> About -> Status)
3. Your phone product ID (to find this, open the dialler and enter *#*#1357946#*#*)
Click to expand...
Click to collapse
Thank you again.
The last is not possible as it returns nothing at all. I'll attempt Huawei live chat support on Monday in hope they can help with unlock code.
First two are printed on the box and the back of phone. There is also a sticker on the back of it with Chinese writing and some combination of letters and numbers. I doubt they are the product ID.

ptwarecki said:
Thank you again.
The last is not possible as it returns nothing at all. I'll attempt Huawei live chat support on Monday in hope they can help with unlock code.
First two are printed on the box and the back of phone. There is also a sticker on the back of it with Chinese writing and some combination of letters and numbers. I doubt they are the product ID.
Click to expand...
Click to collapse
If you can take a picture of them and post it here, maybe I can help, since I'm Chinese.

the best thing to do is getting a someone backup without efs and restore . ( just rename one folder and replace phone serial no .

Romiui said:
the best thing to do is getting a someone backup without efs and restore . ( just rename one folder and replace phone serial no .
Click to expand...
Click to collapse
Hi,
Thank you, although as previously, my knowledge is basic, practice even less. If you are able to instruct, I will give it a try.

jerryhou85 said:
If you can take a picture of them and post it here, maybe I can help, since I'm Chinese.
Click to expand...
Click to collapse
That's the box and back. I also added the message from launching android wear and settings screen

ptwarecki said:
That's the box and back. I also added the message from launching android wear and settings screen
Click to expand...
Click to collapse
listen lets fix things one by one !
First Problem is : This phone has been flashed with an unsupported configuration for companion
u should be rooted other wize this cant be fixed .
Install Rootexplorer.apk
navigate to system / build prop . open it with text editor and change this line
ro.build.type=userdebug
to
ro.build.type=user
Save and restart . this issue will go .
if u still need more things to do inform me .

Romiui said:
listen lets fix things one by one !
First Problem is : This phone has been flashed with an unsupported configuration for companion
u should be rooted other wize this cant be fixed .
Install Rootexplorer.apk
navigate to system / build prop . open it with text editor and change this line
ro.build.type=userdebug
to
ro.build.type=user
Save and restart . this issue will go .
if u still need more things to do inform me .
Click to expand...
Click to collapse
I also have a china version of a 128GB FRD AL10 its all working fine but i would like to go to a europe ROM if i can? the seller said Huawei told him if he flashed the device it would break and not work with an EU ROM? i cant set encryption and this is an issue for me as i need it for my work email to work. i also have quite a lot of Chinese text still on some areas, any help greatly appreciated

hi, you can install a European rom instead of the Chinese version in the FRD-AL10? Best regards

Hey, got the same question as albertazzi65 and cwpaters, can I install another ROM on the Al10? And will that enable another bands fot lte?

How to fix null IMEI 000000000000000 ?

Hello guys, it's me again haha.
I haven't had so much trouble with any phone but the Mate 9. After I tried to restore my device to stock and it didn't work out and my phone didn't start anymore, so I made my MHA-L29C432 to a MHA-L29C636 Chinese Variant, so i can access the phone.. now my problem is, that I've no more IMEI and I can't find a way to restore it... I tried to update via Firmware Finder from Playstore; didn't work out because of different Model (obviously). Then I tried out mankindtw's method from here (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) and selected the latest B182-ROM, but now I still don't have any IMEI or Modelnumber, just NRD90M-test-keys and null imei.... I just want to get this damn phone to stock and sell it because it's driving me nuts. Does somebody now a way how to figure it out? Or is the only way funkyhuawei? Is it 100% guaranteed that funkyhuawei works?
Thank you very much and I hope that somebody is able to help me...

TouchscreenLover1 said:
Hello guys, it's me again haha.
I haven't had so much trouble with any phone but the Mate 9. After I tried to restore my device to stock and it didn't work out and my phone didn't start anymore, so I made my MHA-L29C432 to a MHA-L29C636 Chinese Variant, so i can access the phone.. now my problem is, that I've no more IMEI and I can't find a way to restore it... I tried to update via Firmware Finder from Playstore; didn't work out because of different Model (obviously). Then I tried out mankindtw's method from here (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) and selected the latest B182-ROM, but now I still don't have any IMEI or Modelnumber, just NRD90M-test-keys and null imei.... I just want to get this damn phone to stock and sell it because it's driving me nuts. Does somebody now a way how to figure it out? Or is the only way funkyhuawei? Is it 100% guaranteed that funkyhuawei works?
Thank you very much and I hope that somebody is able to help me...
Click to expand...
Click to collapse
When you rebranded you 1st "rebrand" to the region you want, then after it was successful, you are supposed to go in the program again and run "update- to same phone" and run the program again. That should take care of all the problems
answered with mental telepathy

TouchscreenLover1 said:
Hello guys, it's me again haha.
I haven't had so much trouble with any phone but the Mate 9. After I tried to restore my device to stock and it didn't work out and my phone didn't start anymore, so I made my MHA-L29C432 to a MHA-L29C636 Chinese Variant, so i can access the phone.. now my problem is, that I've no more IMEI and I can't find a way to restore it... I tried to update via Firmware Finder from Playstore; didn't work out because of different Model (obviously). Then I tried out mankindtw's method from here (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) and selected the latest B182-ROM, but now I still don't have any IMEI or Modelnumber, just NRD90M-test-keys and null imei.... I just want to get this damn phone to stock and sell it because it's driving me nuts. Does somebody now a way how to figure it out? Or is the only way funkyhuawei? Is it 100% guaranteed that funkyhuawei works?
Thank you very much and I hope that somebody is able to help me...
Click to expand...
Click to collapse
U can with a paid solution if u dont fix it, u can use Dc Phoenix to flash and HCU client to fix IMEI.
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Sent from my LON-L29 using XDA Labs

jr313 said:
When you rebranded you 1st "rebrand" to the region you want, then after it was successful, you are supposed to go in the program again and run "update- to same phone" and run the program again. That should take care of all the problems
answered with mental telepathy
Click to expand...
Click to collapse
Okay, I'll try that, will report soon

TouchscreenLover1 said:
Okay, I'll try that, will report soon
Click to expand...
Click to collapse
hi. were you able to fix your imei problem? im in the same boat. thanks.

hcu no support emui 9.0

HCU no haveb suport Emui 9

No. There is no solution for the latest 2018 onwards Huawei phones for IMEI issues.

The decision is to restore, write to PM

Please HELP I WILL PAY

I have a mate 9. mh-L29C185
Using firmware finder i accidentally downloaded and updated to c633 and now it enters Huawei eRecovery. Getting package info failed. Help me please.

Szilard666 said:
I have a mate 9. mh-L29C185
Using firmware finder i accidentally downloaded and updated to c633 and now it enters Huawei eRecovery. Getting package info failed. Help me please.
Click to expand...
Click to collapse
If you are willing to pay, just use funky huawei.
Or, you can try this method.
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165/page1
After do above method, do a full wipe.
This method do not require unlock bootloader

Thank you so much! I will try. I took it to gsm service. How stupid I am. Any more suggestions? pls help

we should download only when the IMEI is supported ,correct?

yes but i did a stupid mistake , i thnik i soft bricked it. Is there any way to make it good again?

Szilard666 said:
yes but i did a stupid mistake , i thnik i soft bricked it. Is there any way to make it good again?
Click to expand...
Click to collapse
Check if "phone unlocked frp unlock" is still there in fastboot.
If it is it's pretty easy to fix without paying
Though it's weird you could flash a different brand using firmware finder, you normally need to flash oeminfo to be able to flash a different brand...
Or you could set up firmware finders proxy and use that to flash back L29C185 in recovery.

I went to gsm service and they managed to hard brick it. They say it is the motherboard. It is under warranty so I will send it to original hauwei service.

Downgrade firmware to unlock bootloader to root

Hi all,
I got my new Huawei Honor V10 Saturday and it's an excellent phone! The phone updated itself to the latest firmware as soon as it connected to WiFi.
So now I have BKL - L09 8.0.0. 163(C636)
This is an important question that might help all new V10 people....
Would it be possible to use funky Huawei to downgrade the firmware to before the July patch /update and then use DC unlocker or HCU client to unlock the bootloader??
What's your thoughts on this?
Thanks for your help
D.

Do you have a code?
If you have a code.. You don't have to downgrade
If you don't have a code.... Sorry about your bad luck

br54 said:
Do you have a code?
If you have a code.. You don't have to downgrade
If you don't have a code.... Sorry about your bad luck
Click to expand...
Click to collapse
He does not have one.
We were thinking, as DC/HCU used to work with Honor V10 (though on their site it only lists AL models, but I have seen someone use it to remove FRP lock), downgrading might be a solution. Sadly there are no dload packages for C636, but they exist for both C432 and C00 on androidhost.ru.
The thing is, if someone has already tried this and it failed OP wouldn't have to waste $45$.
So if someone on C432 who doesn't have an unlock code they could test downgrading to a May patch firmware or earlier.
I can provide instructions if you want to test.
This works fine on Mate 10/Pro as long as you haven't updated to a 02 xloader, then downgrading won't work as recovery will check xloader to prevent the brick that occurs when you flash a 01 xloader firmware on one with 02

I have a c675 on b161...I have a unlock code.. But am unwilling to root the finiky honor..
While I could.. It's not as easy or simple as my old Samsung.. Plus a lot of the features break upon flashing of other ROMs
While I would debloat tweak..I think the phone is fine as it is
Good luck...
ante0 said:
He does not have one.
We were thinking, as DC/HCU used to work with Honor V10 (though on their site it only lists AL models, but I have seen someone use it to remove FRP lock), downgrading might be a solution. Sadly there are no dload packages for C636, but they exist for both C432 and C00 on androidhost.ru.
The thing is, if someone has already tried this and it failed OP wouldn't have to waste $45$.
So if someone on C432 who doesn't have an unlock code they could test downgrading to a May patch firmware or earlier.
I can provide instructions if you want to test.
This works fine on Mate 10/Pro as long as you haven't updated to a 02 xloader, then downgrading won't work as recovery will check xloader to prevent the brick that occurs when you flash a 01 xloader firmware on one with 02
Click to expand...
Click to collapse

br54 said:
I have a c675 on b161...I have a unlock code.. But am unwilling to root the finiky honor..
While I could.. It's not as easy or simple as my old Samsung.. Plus a lot of the features break upon flashing of other ROMs
While I would debloat tweak..I think the phone is fine as it is
Good luck...
Click to expand...
Click to collapse
OP doesn't have an unlock code. OP is asking if it would be possible to downgrade using FunkyHuawei to an earlier fw, and then to use DC/HCU to get unlock code.
Same way can be done on Mate 10/Pro, I downgraded (Though through DLOAD) from C432B148-SP1 to B142 and DC was working fine. On C432B145+ (June+) it is not working at all.
But I cant find any real proof that DC/HCU was working for global Honor View 10 prior to June firmware.
And as for debloating, there's not much bloat to begin with (thankfully). And preinstalled apps, including some of Huaweis own, can be uninstalled/disabled.
I couldn't live without root But I guess I like tinkering with my phone more than actually using it as a phone, lol

Good luck

ante0 said:
I couldn't live without root But I guess I like tinkering with my phone more than actually using it as a phone, lol
Click to expand...
Click to collapse
I am the exact same here and that's why I want to root this beast lol lol!

Downgrade Honor 9 stf-l09 from 8.0.0.378(c432)
ante0 said:
He does not have one.
We were thinking, as DC/HCU used to work with Honor V10 (though on their site it only lists AL models, but I have seen someone use it to remove FRP lock), downgrading might be a solution. Sadly there are no dload packages for C636, but they exist for both C432 and C00 on androidhost.ru.
The thing is, if someone has already tried this and it failed OP wouldn't have to waste $45$.
So if someone on C432 who doesn't have an unlock code they could test downgrading to a May patch firmware or earlier.
I can provide instructions if you want to test.
This works fine on Mate 10/Pro as long as you haven't updated to a 02 xloader, then downgrading won't work as recovery will check xloader to prevent the brick that occurs when you flash a 01 xloader firmware on one with 02
Click to expand...
Click to collapse
Hi,
I have Honor 9 STF-L09 that was previously unlocked officially but when I upgraded to 8.0.0.378(c432) bootloader get locked and now I am unable to unlock it with dc unlocker it get error 375. Can you provide me with instructions how to downgrade it. Thanks

romanp_ua said:
Hi,
I have Honor 9 STF-L09 that was previously unlocked officially but when I upgraded to 8.0.0.378(c432) bootloader get locked and now I am unable to unlock it with dc unlocker it get error 375. Can you provide me with instructions how to downgrade it. Thanks
Click to expand...
Click to collapse
You would have to use service firmware from androidhost.ru. I would downgrade to the version which is GPU Turbo. That one might work with DC.
You get instructions with the firmware, but basically just you unzip the file, copy the 'dload' folder from 'Software' to microsd and start dload mode (Vol up + down + power).

ante0 said:
You would have to use service firmware from androidhost.ru. I would downgrade to the version which is GPU Turbo. That one might work with DC.
You get instructions with the firmware, but basically just you unzip the file, copy the 'dload' folder from 'Software' to microsd and start dload mode (Vol up + down + power).
Click to expand...
Click to collapse
HI,
Thanks for quick reply. I will try your method later on but I would like to say that
I did try to downgrade to STF-L09_C432B130 from 4pda.ru/forum via SD card method in *#*#2846579#*#* but it failed at 5%
Any Idea what could be wrong? Also can you tell me how do I know that firmware is GPU Turbo? Thanks

romanp_ua said:
HI,
Thanks for quick reply. I will try your method later on but I would like to say that
I did try to downgrade to STF-L09_C432B130 from 4pda.ru/forum via SD card method in *#*#2846579#*#* but it failed at 5%
Any Idea what could be wrong? Also can you tell me how do I know that firmware is GPU Turbo? Thanks
Click to expand...
Click to collapse
B376 is the build that added GPUTurbo so you should be able to downgrade to that.
They added a new bootloader in that so you can't downgrade past it.
(You can technically but your device will hardbrick and you need to flash with TWRP or NoCheck recovery).
It may be possible because huawei started preventing downgrades in Pie, and I'm not sure if they've done so in later builds of Oreo too...

ante0 said:
He does not have one.
We were thinking, as DC/HCU used to work with Honor V10 (though on their site it only lists AL models, but I have seen someone use it to remove FRP lock), downgrading might be a solution. Sadly there are no dload packages for C636, but they exist for both C432 and C00 on androidhost.ru.
The thing is, if someone has already tried this and it failed OP wouldn't have to waste $45$.
So if someone on C432 who doesn't have an unlock code they could test downgrading to a May patch firmware or earlier.
I can provide instructions if you want to test.
This works fine on Mate 10/Pro as long as you haven't updated to a 02 xloader, then downgrading won't work as recovery will check xloader to prevent the brick that occurs when you flash a 01 xloader firmware on one with 02
Click to expand...
Click to collapse
I have. A question It's possible to unpack update.app with xloader2.Img replace for xloader1.img from update before July pacht and repack and this shloud work? Or not I'm so noob I'm. Sorry for the question anybody tried?

ante0 said:
B376 is the build that added GPUTurbo so you should be able to downgrade to that.
They added a new bootloader in that so you can't downgrade past it.
(You can technically but your device will hardbrick and you need to flash with TWRP or NoCheck recovery).
It may be possible because huawei started preventing downgrades in Pie, and I'm not sure if they've done so in later builds of Oreo too...
Click to expand...
Click to collapse
Yes, thanks I did managed to downgrade to 376 and tried to use dc again with same error 375. I did notice that my phone is not in device manager modem section as required by DC May this be a reason? Also what is downgrading in Pie ?

romanp_ua said:
Yes, thanks I did managed to downgrade to 376 and tried to use dc again with same error 375. I did notice that my phone is not in device manager modem section as required by DC May this be a reason? Also what is downgrading in Pie ?
Click to expand...
Click to collapse
Downgrade to a previous build. Like B197 to B179. Can't be done in Pie.
You could try with the Handset ProductLine drivers found in DCs download section, but if it can read phone it means it should work if it's not patched in B376. So chances are they added it in B376, and you can't downgrade past it.
You didn't save unlock code last time you got it?

ante0 said:
He does not have one.
We were thinking, as DC/HCU used to work with Honor V10 (though on their site it only lists AL models, but I have seen someone use it to remove FRP lock), downgrading might be a solution. Sadly there are no dload packages for C636, but they exist for both C432 and C00 on androidhost.ru.
The thing is, if someone has already tried this and it failed OP wouldn't have to waste $45$.
So if someone on C432 who doesn't have an unlock code they could test downgrading to a May patch firmware or earlier.
I can provide instructions if you want to test.
This works fine on Mate 10/Pro as long as you haven't updated to a 02 xloader, then downgrading won't work as recovery will check xloader to prevent the brick that occurs when you flash a 01 xloader firmware on one with 02
Click to expand...
Click to collapse
You're the master!

ante0 said:
Downgrade to a previous build. Like B197 to B179. Can't be done in Pie.
You could try with the Handset ProductLine drivers found in DCs download section, but if it can read phone it means it should work if it's not patched in B376. So chances are they added it in B376, and you can't downgrade past it.
You didn't save unlock code last time you got it?
Click to expand...
Click to collapse
Unfortunately I could not find the code I was given before.
DC does not identify my phone by name and model it is just saying Found Applications port
Also in DC app on my phone there is no option for code by IMEI ???
I could not find a specific drivers for my phone in download section of Dc site. There is two files for Huawei Android phone drivers but I do not know how to instal them.

Any way to unbrick a P40 Pro? "Your device has loaded a different operating system"

So like a dummy I flashed the wrong firmware on my P40 Pro. LGRP6 instead of LGRP4. Now when booting it says "Your device has loaded a different operating system" and then goes straight to erecovery. In eRecovery, downloading and restoring the system doesn't work because it fails to retrieve package info.
I already tried everything possible with HiSuite Proxy, too. I read bricking a P40 Pro this way requires to replace the motherboard, but not sure how true that is. My phone is still under warranty, but I'd prefer to fix it myself, if possible.
Any ideas? Thanks.

Tried eRecovery without any sim card in it?

Superbia said:
Tried eRecovery without any sim card in it?
Click to expand...
Click to collapse
Yes, I just get retrieving package info failed. Every time

Then it seems motherboard replacement is the only known option left.

Same issue with me

I spent a month to fix it and didn't find a way.
I tried Chimera Mobile and it didn't helped.
The only thing that probably can help is SigmaKey software. If anybody has it please check and say did it helped or not.
Huawei don't want to replace it by warranty for me, that is why I try everything.

Alex.Novikov said:
I spent a month to fix it and didn't find a way.
I tried Chimera Mobile and it didn't helped.
The only thing that probably can help is SigmaKey software. If anybody has it please check and say did it helped or not.
Huawei don't want to replace it by warranty for me, that is why I try everything.
Click to expand...
Click to collapse
Any update? I'm in the same situation :/

sonybes said:
Any update? I'm in the same situation :/
Click to expand...
Click to collapse
I can't find anybody with SigmaKey. Probably I'll go to replace the motherboard in the nearest future.
Other methods definetely don't help.
Do you have any update? Please share if yes.

Hi all! My device is finally fixed! It was fixed by disassembly, hardware testpoint and flashing of Android 11 via SigmaKey!
You have to find a very expirienced person to do this work. I can recommend one person in Moscow, Russia in private messages.
Disassembly is probably necessary

Alex.Novikov said:
Hi all! My device is finally fixed! It was fixed by disassembly, hardware testpoint and flashing of Android 11 via SigmaKey!
You have to find a very expirienced person to do this work. I can recommend one person in Moscow, Russia in private messages.
Disassembly is probably necessary
Click to expand...
Click to collapse
Thanks for the update!
After 4 days trying everythingI found also a guy who told me exactly what you are saying. disassembly is required because of the test point. No other way currently.
SoI will go to a phone shop tomorrow to disassemble the back cover of my P40Pro+. Then the guy will do the whole flashing process via remote. But it's paid service for 30$. I decided to do or because I wanna use this phone.

sony_bes said:
Thanks for the update!
After 4 days trying everythingI found also a guy who told me exactly what you are saying. disassembly is required because of the test point. No other way currently.
SoI will go to a phone shop tomorrow to disassemble the back cover of my P40Pro+. Then the guy will do the whole flashing process via remote. But it's paid service for 30$. I decided to do or because I wanna use this phone.
Click to expand...
Click to collapse
The only other way is to try to replace the motherboard by warranty.
However, in my case Huawei refused me this.
I think 30$ is a good price because it was very difficult for me to find a person good enough to do it.

Hi guys. Just posting a small update here. I found a xda user who accepted to help me unbrick my P40 Pro for a donation via remote desktop. He will be using paid tools and hopefully it will unbrick the device. I'll post another update soon, to let you guys know the outcome. Fingers crossed!

jericho246 said:
Hi guys. Just posting a small update here. I found a xda user who accepted to help me unbrick my P40 Pro for a donation via remote desktop. He will be using paid tools and hopefully it will unbrick the device. I'll post another update soon, to let you guys know the outcome. Fingers crossed!
Click to expand...
Click to collapse
It is not always possible without disassembly. (Like was in my case)
I wish you good luck but be ready for disassembly.

Another update. First of all big thanks to @oslo83 for accepting to help me with my bricked P40 Pro. Unfortunately things didn't go our way and the device is still bricked. The problem is that I flashed LGRP6 EMUI 11, with EMUI 10.1 preload & cust. A ****ty situation but it is what it is. @oslo83 advised me to take the device to Huawei repair center (it's still under warranty) and that's what I'm going to do.
However if anyone has a bricked P40 Pro, I still recommend oslo83 services, there's a chance your brick is different from mine and that he will be able to unbrick it. If not, he will issue a refund like he did for me.

Hi guys, I have a brilliant update for you guys:
The guy I was working on this issue was able to fix my phone remotely with SigmaKey. After hours of tries he made it!
There is no software solution yet - so the back cover has to be dissembled. I went to a phone shop at the corner and let them open it. After removing ca. 10 screws you can reach the "Test Point". There are some videos on YouTube which can support you. Its not easy but its makable.
The genius guy gives a step by step instruction what to do via WhatsApp.
So at the end my P40Pro+ works again and I am so happy! I will start the downgrade now (to install gms)and I will DEFINITELY use the correct FW this time
I can share the contact - send me a private message.

Another update hopefully the next one will be the FINAL one.
So like @oslo83 suggested, I contacted Huawei via chat on their official site. They accepted to repair my device for free with no problem. I sent my phone to the repair center and now I simply have to wait. The person in the Huawei chat told me it could take up to two weeks. And another thing, they let me know the phone will be updated to the latest firmware, so I probably won't be able to downgrade and install GMS, unless there is a way to install it on EMUI 11 (not sure). But at least I'll have a working P40 Pro again

I have the same problem. I'm tryingto fix it with hsuite proxy and the phone in fastboot&rescue mod
In HiSuiteConfig.xml I added to be able to enter the recovery mode
<rule type="ELS-N29" cnName="HUAWEI P40 Pro" enName="HUAWEI P40 Pro" option="" ></rule>
I'm testing to flash this:
Base version: ELS-LGRP4-OVS 10.1.0.176
Custom version: ELS-N29-CUST 10.1.0.8(C432)
Preload version: ELS-N29-PRELOAD 10.1.0.2(C432R5)
Checked "Recovery OS", CUST PKG and Preloaded PKG
So far it connects
I can download and unpack the firmware on the phone
but then I have an error-message on (Installing 0%) telling me, that on this phone the recovery mode is not available. I'm trying with different base firmware - but every attempt takes a lot of time.

muetter said:
I have the same problem. I'm tryingto fix it with hsuite proxy and the phone in fastboot&rescue mod
In HiSuiteConfig.xml I added to be able to enter the recovery mode
<rule type="ELS-N29" cnName="HUAWEI P40 Pro" enName="HUAWEI P40 Pro" option="" ></rule>
I'm testing to flash this:
Base version: ELS-LGRP4-OVS 10.1.0.176
Custom version: ELS-N29-CUST 10.1.0.8(C432)
Preload version: ELS-N29-PRELOAD 10.1.0.2(C432R5)
Checked "Recovery OS", CUST PKG and Preloaded PKG
So far it connects
I can download and unpack the firmware on the phone
but then I have an error-message on (Installing 0%) telling me, that on this phone the recovery mode is not available. I'm trying with different base firmware - but every attempt takes a lot of time.
Click to expand...
Click to collapse
Update: It's always the same error message after unpacking the files. So now I'm trying to install an EMUI11 rom.
Now testing with:
ELS-LGRP4-OVS 11.0.0.175
ELS-N29-CUST 11.0.0.3(C432)
ELS-N29-PRELOAD 11.0.0.3(C432R5)
Update: Failed to at 0% :-(

muetter said:
Update: It's always the same error message after unpacking the files. So now I'm trying to install an EMUI11 rom.
Now testing with:
ELS-LGRP4-OVS 11.0.0.175
ELS-N29-CUST 11.0.0.3(C432)
ELS-N29-PRELOAD 11.0.0.3(C432R5)
Update: Failed to at 0% :-(
Click to expand...
Click to collapse
It looks like I have flashed the following:
"FirmWare" : "ELS-LGRP4-OVS 11.0.0.170"
"FirmWare" : "ELS-N29-CUST 11.0.0.3(C301)"
"FirmWare" : "ELS-N29-PRELOAD 11.0.0.3(C635R2)"
Still trying to reflash ... any ideas?

I've built now my own dload
using the files downloaded by hsuite over hisuite proxy inside Hisuite\ROM/
and copy them on a USB-C-drive /dload
trying the usb-flashing method. So far it went only to 37%