I need the oeminfo to l09c605, could anyone help me? I had installed l09c432 (rebrand) on my c605 and now it shows me that i have 2 sim cards, but my version is l09.
jonascrstm said:
I need the oeminfo to l09c605, could anyone help me? I had installed l09c432 (rebrand) on my c605 and now it shows me that i have 2 sim cards, but my version is l09.
Click to expand...
Click to collapse
Are you sure that you installed L09c432? It is one-sim model. May be you applied L29c432 - it is dualism.
5[Strogino] said:
Are you sure that you installed L09c432? It is one-sim model. May be you applied L29c432 - it is dualism.
Click to expand...
Click to collapse
Yes, I am. I'll do it following the tutorial available on XDA. The software is working well, the only strange thing was that.
hi! i had the same problem as you so i have the l09c605b111 and rebranded to the l09c432b194 and the problem appear like you, detected as double sim and if i turn off the phone i have to wait to turn on and eject the sim card and insert to get signal, that was a problem so i have my oeminfo backed up at home i made it with TWRP i can send it to you when i get home!. i rebranded again using the l09bc605b115 from FIRMWARE FINDER and its working like a charm!.
slsl said:
hi! i had the same problem as you so i have the l09c605b111 and rebranded to the l09c432b194 and the problem appear like you, detected as double sim and if i turn off the phone i have to wait to turn on and eject the sim card and insert to get signal, that was a problem so i have my oeminfo backed up at home i made it with TWRP i can send it to you when i get home!. i rebranded again using the l09bc605b115 from FIRMWARE FINDER and its working like a charm!.
Click to expand...
Click to collapse
Thanks for info. Probably, existing oeminfo L09C432 was modified from L29's oeminfo (Just changed 2 to 0 in file).
But it is root of problem, that goes to double-sim detection.
Overall, need original oeminfo. I will make request in special thread: https://forum.xda-developers.com/mate-9/development/oeminfo-library-t3555353/post74465934
Related
Firstly let me apologize for duplicating the content of several other topics. This post will intend to summarize the issue in order to provide better visibility to anyone trying to help.
To start off, I have the same problem with my Mate 8.
The Issue
The Huawei Mate 8 has two Sim Card Slots: one supports 3g/4g and the other supports only 2g. That's how it's build.
When you pun in non-China Telecom card into *either* of the slots a message pops up saying that 3g/4g is only supported on China Telecom: https://tj6nvw-bn1306.files.1drv.com/y3p0MIG3qgLckpGbYHxgH70oReY058UmP2hfiLYG-HZPelszWa8XkA5gqwtKldaPY54l0lK91_XhjKz149GjRW6H06HJyAdEN7dXS8GzEWZyDvEiUeg7moZtmEGVG3nFj-qqywRCQTzYESnpN5IGyuD7w/Screenshot_2016-01-26-14-08-52%20%281%29.png?psid=1
More Details
It is possible to change the active 3g/4g card slot via settings configuration.
You can use 2g capabilities in *any* of the physical slots (via configuration above)
When you insert 2 sim cards only one of them is active. The device does *not* recognize the second card. It is possible to switch between the two cards, but only one of them can be active.
The problem is reported only for CL00 & TL00 models (and not the AL10 or L29 ones).
What is tried already?
I've tried and confirm all the items above.
Did factory reset.
I've loaded the International Software to Mate 8 from this topics
The Chinese Telecom message no longer appears on the International Software, however the slot still doesn't work.
Did factory reset on the international Software as well.
Tried to unlock it via DC-Unlocker - it is not possible. The "Unlock" button is grayed out.
The Sim Status in DC-Unlocker is "unlocked" however it shows only one IMEI number, where the phone has 2 IMEI numbers if you check it via *#06#
Guys report the same problem with Verizon cards, where Verizon and China Telecom networks are similar.
Thoughts/Suggestions
I talked to the DC Unlocker guys from the support and they advised me it might be from the Firmware. Even I've installed the international one and don't rule out that this might be the root issue of the issue as I don't know the origins of the International software.
Any suggestions?
Update 1: I got feedback from DC Unlocker Support that the phone is most likely "unlocked". Still I'm not convinced that both sim slots are unlocked.
Update 2: Another suggestion from DC Unlocker Support: If device support frequencies (EU) and if they are different from China (they might be) then, yes it should be possible to solve this with correct firmware if such exists. You should check first original specifications of device for china networks, then compare them to network that you want to use it with.
Update 3: Clarification that problem exists only for CL00 & TL00 models (and not the AL10 or L29) (thanks @jbmc83)
u have to add that this is only pertaining to the china telecom locked models CL00 & TL00, and not the AL10 or L29 models
I have AL10 and verizon sim wont work.
Sent from my HUAWEI NXT-AL10 using Tapatalk
is it only verizon or also other carriers?
edit: ah thats a different reason though. both al10 and l29 mate 8 versions are gsm and not cdma based. thats different from the cl00 and tl00 variants being carrier locked to specific network providers...
im betting ur al10 will work just fine with tmobile or att
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
Flikera said:
Firstly let me apologize for duplicating the content of several other topics. This post will intend to summarize the issue in order to provide better visibility to anyone trying to help.
To start off, I have the same problem with my Mate 8.
The Issue
The Huawei Mate 8 has two Sim Card Slots: one supports 3g/4g and the other supports only 2g. That's how it's build.
When you pun in non-China Telecom card into *either* of the slots a message pops up saying that 3g/4g is only supported on China Telecom: https://tj6nvw-bn1306.files.1drv.com/y3p0MIG3qgLckpGbYHxgH70oReY058UmP2hfiLYG-HZPelszWa8XkA5gqwtKldaPY54l0lK91_XhjKz149GjRW6H06HJyAdEN7dXS8GzEWZyDvEiUeg7moZtmEGVG3nFj-qqywRCQTzYESnpN5IGyuD7w/Screenshot_2016-01-26-14-08-52%20%281%29.png?psid=1
More Details
It is possible to change the active 3g/4g card slot via settings configuration.
You can use 2g capabilities in *any* of the physical slots (via configuration above)
When you insert 2 sim cards only one of them is active. The device does *not* recognize the second card. It is possible to switch between the two cards, but only one of them can be active.
The problem is reported only for CL00 & TL00 models (and not the AL10 or L29 ones).
What is tried already?
I've tried and confirm all the items above.
Did factory reset.
I've loaded the International Software to Mate 8 from this topics
The Chinese Telecom message no longer appears on the International Software, however the slot still doesn't work.
Did factory reset on the international Software as well.
Tried to unlock it via DC-Unlocker - it is not possible. The "Unlock" button is grayed out.
The Sim Status in DC-Unlocker is "unlocked" however it shows only one IMEI number, where the phone has 2 IMEI numbers if you check it via *#06#
Guys report the same problem with Verizon cards, where Verizon and China Telecom networks are similar.
Thoughts/Suggestions
I talked to the DC Unlocker guys from the support and they advised me it might be from the Firmware. Even I've installed the international one and don't rule out that this might be the root issue of the issue as I don't know the origins of the International software.
Any suggestions?
Update 1: I got feedback from DC Unlocker Support that the phone is most likely "unlocked". Still I'm not convinced that both sim slots are unlocked.
Update 2: Another suggestion from DC Unlocker Support: If device support frequencies (EU) and if they are different from China (they might be) then, yes it should be possible to solve this with correct firmware if such exists. You should check first original specifications of device for china networks, then compare them to network that you want to use it with.
Update 3: Clarification that problem exists only for CL00 & TL00 models (and not the AL10 or L29) (thanks @jbmc83)
Click to expand...
Click to collapse
I can confirm it doesn't have this issue with the NXT-DL00 model on ATT it reads my sim just fine
wricu01 said:
I can confirm it doesn't have this issue with the NXT-DL00 model on ATT it reads my sim just fine
Click to expand...
Click to collapse
I have the DL00 version as well and I was wondering have you tried to load the international ROM or anything else on it. Does it work the same as the AL10
Who can lay oeminfo file from
dev / block / platform / hi_mci.0 / by-name /
of firmware for L29
jjerickson19 said:
I have the DL00 version as well and I was wondering have you tried to load the international ROM or anything else on it. Does it work the same as the AL10
Click to expand...
Click to collapse
Yes, I am currently with the international rom from the link in the original post. Still doesn't work.
off-line said:
Who can lay oeminfo file from
dev / block / platform / hi_mci.0 / by-name /
of firmware for L29
Click to expand...
Click to collapse
For CL00 user, it seems to me that the international(eu) "oeminfo" file is the key for flashing L29 firmware, described as this topic.
Does anyone put "oeminfo" file of L29 anywhere??
Even putting different roms on this phone doesn't change the fact the main aim is locked in CDMA / LTE mode. It's a hardware thing or something these different roms can't edit.
same problem
1st slot 4g 3g 2g snd slot 3g/2g on each mate 8 any version
I have a mexican telcel model MHA-L09C69B110, and throug huawei firmware finder, found OTA MHA-L09BC69B110, but due the fact that other two carriers AT&T and Movistar have Mexican versions, have a doubt to install it. How to be sure that it belongs to Telcel?
1. How to find Vendor Info
Go into dialer (only stock works)
Enter *#*#2846579#*#*
Go to 3. Network Information Query
Choose 4. Vendor Country Info
2. How to analyze ROM.
Go to FF site with your model
http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=Mha-l09bc69&firmware_page=0
Choose filelist and notice what text written in vendorInfo.
In common case, there are three files:
update.zip
update_data_(full_)public.zip
update_(full_)[your vendorInfo].zip
Example: update_telcel_mx.zip
If 1 and 2 are same, so you can install this OTA
Question
I have a firmware that doesn't appear anywhere
IUSACELL, MX MH09-L09C212 EMUI 5.0 Really Alcatel Mexico
And software finder doesn't find it, is this something normal that firmware's are not register?
Thank you
enotar said:
Question
I have a firmware that doesn't appear anywhere
IUSACELL, MX MH09-L09C212 EMUI 5.0 Really Alcatel Mexico
And software finder doesn't find it, is this something normal that firmware's are not register?
Thank you
Click to expand...
Click to collapse
Your only option is change to L29C636 firmware (free), L09C432 (paying) or keep the current firmware with AT&TMX.
---------- Post added at 09:28 PM ---------- Previous post was at 09:27 PM ----------
mxloco said:
I have a mexican telcel model MHA-L09C69B110, and throug huawei firmware finder, found OTA MHA-L09BC69B110, but due the fact that other two carriers AT&T and Movistar have Mexican versions, have a doubt to install it. How to be sure that it belongs to Telcel?
Click to expand...
Click to collapse
Telcel is L09C69B110 and Iusacell is L09C212B118.
enotar said:
Question
I have a firmware that doesn't appear anywhere
IUSACELL, MX MH09-L09C212 EMUI 5.0 Really Alcatel Mexico
And software finder doesn't find it, is this something normal that firmware's are not register?
Thank you
Click to expand...
Click to collapse
Yes. It is normal.
FF does not know path to ROM with your localization. Probably, Huawei flashed stock firmware in factory and did not post it on HiCloud.
All firmware are in Huawei's HiCould. FF scans some parameters and checks if update exists on exact link.
You can help if you will receive notification of next update and find link to it (you need find from what link phone will download update)
mxloco said:
I have a mexican telcel model MHA-L09C69B110, and throug huawei firmware finder, found OTA MHA-L09BC69B110, but due the fact that other two carriers AT&T and Movistar have Mexican versions, have a doubt to install it. How to be sure that it belongs to Telcel?
Click to expand...
Click to collapse
Did you try it? I want to install it too
I couldn't update to MHA-L09C69B110
yrvi said:
Did you try it? I want to install it too
Click to expand...
Click to collapse
Even when I did extract the files with HuaweiUpdateExtractor appeared the file VERSION.mbn, opened with notepad, can be read MHA-L09C69B110, , and made the folder dload in external SDcard and paste the UPDATE.APP file, message told no valid version for this phone, etc.
So I desisted to update until be sure about. I had a doubt: does UPDATE.APP the only file to paste inside dload folder? Other files seem to have information so neccesary for update. But I understood that the only file to be paste does UPDATE.APP, so we need some help at this point
mxloco said:
Even when I did extract the files with HuaweiUpdateExtractor appeared the file VERSION.mbn, opened with notepad, can be read MHA-L09C69B110, , and made the folder dload in external SDcard and paste the UPDATE.APP file, message told no valid version for this phone, etc.
So I desisted to update until be sure about. I had a doubt: does UPDATE.APP the only file to paste inside dload folder? Other files seem to have information so neccesary for update. But I understood that the only file to be paste does UPDATE.APP, so we need some help at this point
Click to expand...
Click to collapse
Most of ROMs are with tag online_update.
So, you can't install them via dload-method, sdcard-method and other offline methods. Only online, only via system update.
Using system update to MHA-L09BC69B110 give me a file bigger than 8 gb and fail
5[Strogino] said:
Most of ROMs are with tag online_update.
So, you can't install them via dload-method, sdcard-method and other offline methods. Only online, only via system update.
Click to expand...
Click to collapse
Did try system update so it download chunks by 614 mb until download more or less 15 files and results in 8 gb. The same result.....the update doesn't for this phone etc... and the file will be erased, other suggestion please?
mxloco said:
Did try system update so it download chunks by 614 mb until download more or less 15 files and results in 8 gb. The same result.....the update doesn't for this phone etc... and the file will be erased, other suggestion please?
Click to expand...
Click to collapse
Your only option is to upgrade the current model to C432 or C636. Telcel,ATT & Movistar in Mexico will take a lot of time to bring an update to the Mate 9. You can flash the C636 for free and with this your device will have more updates by OTA or FullPackage. For the C432 you will need to pay an online method to do this but this will change your Mate 9 to Europe version.
I own currently an MHA-L09 from ATT-MX with C432 on it.
Phariex said:
Your only option is to upgrade the current model to C432 or C636. Telcel,ATT & Movistar in Mexico will take a lot of time to bring an update to the Mate 9. You can flash the C636 for free and with this your device will have more updates by OTA or FullPackage. For the C432 you will need to pay an online method to do this but this will change your Mate 9 to Europe version.
I own currently an MHA-L09 from ATT-MX with C432 on it.
Click to expand...
Click to collapse
How can I do that??? I own currently an MHA-L09 from Telcel.
Hi
Sorry if this is not teh right place but I´m new at this.
I bought my huawei at ATT
model MHA-L09C212
can you help me trying to install a stock firmware. not from ATT ?
thanks so much
---------- Post added at 04:42 PM ---------- Previous post was at 04:36 PM ----------
Yrvingisaacp said:
How can I do that??? I own currently an MHA-L09 from Telcel.
Click to expand...
Click to collapse
Me too.
From ATT Mexico
MHA-L09C212
How can I install C636 you mention ? I look at funkyhuawei but I´m not sure how to do that.
Can you help me please
mxloco said:
I have a mexican telcel model MHA-L09C69B110, and throug huawei firmware finder, found OTA MHA-L09BC69B110, but due the fact that other two carriers AT&T and Movistar have Mexican versions, have a doubt to install it. How to be sure that it belongs to Telcel?
Click to expand...
Click to collapse
Did you received an update last week??
yrvi said:
How can I do that??? I own currently an MHA-L09 from Telcel.
Click to expand...
Click to collapse
Me too
Sent from my HUAWEI MHA-L09 using XDA Labs
You can look at the rebranding guide here and maybe earn an additional SIM-card slot when rebranding to L29?
Bought phone Mate 9 second hand.
How can I be sure what version is it or if its been rebranded?
About phone says its a MHA-L09 and build is L09C432B182
I tried to upgrade it to newest b193 with method in this post [Guide] Mate 9 Flash Update Package and Rebrand
but after upgrade i noticed I lost MEID just zeros, same with PESN when type: *#06#
I am not sure if those numbers were the same before upgrade or something just went wrong.
Other thing is that phone doesnt recognize sim cards after upgrade, it works fine with b182, even if I do upgrade with normal software upgrade throuh phone it finds b190 and again sim is not recognized.
It made me thinking ,how can I actually know what version of Mate 9 i have? I went to huawei web site to check warranty (http://consumer.huawei.com/in/support/warranty-query/index.htm) for this phone and acording to its serial nr/ imei and it says its a MHA-L09B ?im slightly surprised as i found out L09B is an Australian model? live in UK . my serial nr is UGM0217122003582 can someone advice? also if its L09 so i suppose it should have only 1 sim , then why if i go to mobile network there is an sim 2 network field (grey out) ,is that how it should be?
thx
You have 2 sims cause u rebranded ur phone from single sim l09 to dual sim l29.
Better to rebrand it back to l09 so you can hve ur iemi back and working network.
Read carefully , I have IMEI with all brands , I lost MEID and PESN not IMEI, also never rebranded to any l29 always used l09 that's the point
mixMZ said:
Read carefully , I have IMEI with all brands , I lost MEID and PESN not IMEI, also never rebranded to any l29 always used l09 that's the point
Click to expand...
Click to collapse
Are u sure it was L09 Firmware u used? Because if it shows that u have 2 sim now u used L29 Firmware when u flashed it, if u flash a L09 that is the singel sim version with a L29 Firmware it will show that u have 2 sim slots in the Settings.
Sent from my LON-L29 using XDA Labs
1. bought phone mate 9
2 have no knowledge of its history and if it was rebranded or not.
3. phone info clearly shows MHA - L09 C432B182, IMEI was also there and mach serial number according to huewai warranty checker
4. tried to upgrade many times to newest MHA-09 C432193 but always had some issue with it finaly somehow i did it, phone info was showing MHA - L09 C432B193 IMEI was there but i noticed there is no MEID just zeros
5. confirmed that with dialler: *#06# MEID and PESN have just zeros IMEI is there
6. inserted sim and phone had to noticed its there as had pop up from sim vodafone if i want to use prepay or postpay, after selecting either of two : no service.
7 in settings , mobile network there are 2 sections sim 1 and sim 2 both ,grey out
8 rebranded phone with MHA - L09 C432B186, all went ok but results the same, phone upgraded mobile network still shows sim 1 sim 2 both greyout, no service
9 again flashed phone with MHA - L09 C432B182, straight away phone picked up signal. mobile network still shows sim 1 filled with info and sim 2 greyout.
10.having installed MHA - L09 C432B182 i upgraded software through official way settings ,system upgrade : system found MHA-L09C432B190 proceed with that , as a result system upgraded but again sim 1 sim 2 grey out no service.
Thats why im wondering if there is any way to find out phone original region/brand/version ? how can i know if i got L09 or L29 regardless software it has installed?
Something there is definitely not right if the official phone upgrade screws things up ,there is no service and only firmware that works is 182.
mixMZ said:
1. bought phone mate 9
2 have no knowledge of its history and if it was rebranded or not.
3. phone info clearly shows MHA - L09 C432B182, IMEI was also there and mach serial number according to huewai warranty checker
4. tried to upgrade many times to newest MHA-09 C432193 but always had some issue with it finaly somehow i did it, phone info was showing MHA - L09 C432B193 IMEI was there but i noticed there is no MEID just zeros
5. confirmed that with dialler: *#06# MEID and PESN have just zeros IMEI is there
6. inserted sim and phone had to noticed its there as had pop up from sim vodafone if i want to use prepay or postpay, after selecting either of two : no service.
7 in settings , mobile network there are 2 sections sim 1 and sim 2 both ,grey out
8 rebranded phone with MHA - L09 C432B186, all went ok but results the same, phone upgraded mobile network still shows sim 1 sim 2 both greyout, no service
9 again flashed phone with MHA - L09 C432B182, straight away phone picked up signal. mobile network still shows sim 1 filled with info and sim 2 greyout.
10.having installed MHA - L09 C432B182 i upgraded software through official way settings ,system upgrade : system found MHA-L09C432B190 proceed with that , as a result system upgraded but again sim 1 sim 2 grey out no service.
Thats why im wondering if there is any way to find out phone original region/brand/version ? how can i know if i got L09 or L29 regardless software it has installed?
Something there is definitely not right if the official phone upgrade screws things up ,there is no service and only firmware that works is 182.
Click to expand...
Click to collapse
Can u check Project Menu to see in Veneer Informations if u can find anything there? Dail *#*#2846579#*#* or maby Dc Unlocker/Phoenix can get some info about the phone, and u have HCU-CLIENT.
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
http://hcu-client.com
Sent from my LON-L29 using XDA Labs
Seems it was single sim branded phone and the previous owner has flash it to single sim unbranded.
I think l29c636 firmware can fix it. Just flash an approved firmware.
Hello everyone, i know that here collected the best minds of Huawei custom thing development
So i have a question to you, and i hope that you can help me, i dont know there to search and what to do
Originally i had a Mate 9 with L09 C432 ROM (UK Three mobile), after time i decide to flash custom rom, to get a better battery life, root and another tools
Because my phone is insured i have to bring this to original ROM one day, but.... Now when i am flashing any version of L09 C432 ROM i dont have network access (cannot use mobile data), cannot make calls and messages, but i can receive calls and messages. In row about phone i have MEID 0000000000. In top left corner there should be carrier written - No service, looks like that phone think that he is now 2 sim model
No service
One ROM from L09 which one is working for me is RomAur 1.5
I tried to rebrand to another model, and after back to original, not working, all possible roms - same issue. I dont know which part of ROM responsible for receiving calls and messages, or what i destroyed in my phone
Any idea for this?
Hello.
I'm not a developer or something likewise, I'm just a regular user. I have a mate 9 bought in latin America (Dominican Republic) after a month I rebranded my phone from MHA-L09C25B106 to MHA-L09C432B182. My phone was built with a single SIM and when I installed the ROM from this post. https://youtu.be/8OywEYZ2cbw it also gave me the MEID 00000000000000 but it let me do call and use data, also I noticed that even if the ROM was for MHA-L09 it has two SIM toolkits, one with the name of my carrier and the other with none but the phone was fine. The problem came after I updated to B190. I had the no service massage even though I had my SIM card inside, what I did was while on I took off and back on the SIM card and the service came back on, I restarted and came with the same thing so I took it off and back on again and my service came back. Because I use a case I don't want to be taking it off plus doing the same with the SIM card so I reinstalled back the MHA-L09C432B182 and don't allow the system to update itself.
I recommend for you check your version if it is ...B190 and also do the SIM off and back on solution.
Hope this helps.
Jooosu said:
Hello everyone, i know that here collected the best minds of Huawei custom thing development
So i have a question to you, and i hope that you can help me, i dont know there to search and what to do
Originally i had a Mate 9 with L09 C432 ROM (UK Three mobile), after time i decide to flash custom rom, to get a better battery life, root and another tools
Because my phone is insured i have to bring this to original ROM one day, but.... Now when i am flashing any version of L09 C432 ROM i dont have network access (cannot use mobile data), cannot make calls and messages, but i can receive calls and messages. In row about phone i have MEID 0000000000. In top left corner there should be carrier written - No service, looks like that phone think that he is now 2 sim model
No service
One ROM from L09 which one is working for me is RomAur 1.5
I tried to rebrand to another model, and after back to original, not working, all possible roms - same issue. I dont know which part of ROM responsible for receiving calls and messages, or what i destroyed in my phone
Any idea for this?
Click to expand...
Click to collapse
Did you where able to solve the issue
Sent from my MHA-L09 using Tapatalk
Yep I have to eject and reinsert the SIM. Rebranded from L09C185 to L09C432B190. (SINGLE SIM)
Any fix for this on B194?
Will I have the same issue if I rebrand back to L09C185?
kazprotos said:
Yep I have to eject and reinsert the SIM. Rebranded from L09C185 to L09C432B190. (SINGLE SIM)
Any fix for this on B194?
Will I have the same issue if I rebrand back to L09C185?
Click to expand...
Click to collapse
Nop, I just updated to that version and no hope at all.
Sent from my MHA-L09 using Tapatalk
Yeah I still have to eject SIM and replace it back in after each reboot
install on Rom Aur 1.5 b182 Your problem is solved
Sent from my MHA-L09 using XDA-Developers Legacy app
it's ok whith L29C432, i have the same problem (L09 and MEID 00000)
HI,
Recently rebranded my mate 9 to c432 and back to original C33 official firmware now meid shows 000000000
Is there any way to fix my meid, my sim is not detected and shows NO SERVICE.
Anyway i can fix it, except DCunlocker, Funkyhuawei etc.
any help would be much appreciated.
Shadymind said:
HI,
Recently rebranded my mate 9 to c432 and back to original C33 official firmware now meid shows 000000000
Is there any way to fix my meid, my sim is not detected and shows NO SERVICE.
Anyway i can fix it, except DCunlocker, Funkyhuawei etc.
any help would be much appreciated.
Click to expand...
Click to collapse
Did you use original C33 oeminfo or got from this thread: https://forum.xda-developers.com/mate-9/development/oeminfo-library-t3555353/post70999977
Shadymind said:
HI,
Recently rebranded my mate 9 to c432 and back to original C33 official firmware now meid shows 000000000
Is there any way to fix my meid, my sim is not detected and shows NO SERVICE.
Anyway i can fix it, except DCunlocker, Funkyhuawei etc.
any help would be much appreciated.
Click to expand...
Click to collapse
I am in the same boat. Posted bere my experience a week ago but no reply. I rebranded from C567 to C432 and all work well. I even updated to Oreo. For me is just a cosmetic issues, but I'd still love to fix it.
wmfreak said:
I am in the same boat. Posted bere my experience a week ago but no reply. I rebranded from C567 to C432 and all work well. I even updated to Oreo. For me is just a cosmetic issues, but I'd still love to fix it.[/QUOTE
I don't think it's possible to fix. I have looked into this a lot as I had the same thing happening on my phone and nobody seems to have a fix. When you rebrand a single sim device to a dual SIM ROM it appears to activate the second sim slot which gives the MEID 00000000 in settings and activates dual SIM menu in settings. It also stops the SIM from being read in some ROMs until the SIM is ejected and put back in after a reboot. The second sim reader stays active even if you rebrand back to a single sim ROM. I ultimately had to send my phone off to be repaired and they ended up replacing the mainboard under warranty.
Click to expand...
Click to collapse
Dmn100 said:
wmfreak said:
I am in the same boat. Posted bere my experience a week ago but no reply. I rebranded from C567 to C432 and all work well. I even updated to Oreo. For me is just a cosmetic issues, but I'd still love to fix it.[/QUOTE
I don't think it's possible to fix. I have looked into this a lot as I had the same thing happening on my phone and nobody seems to have a fix. When you rebrand a single sim device to a dual SIM ROM it appears to activate the second sim slot which gives the MEID 00000000 in settings and activates dual SIM menu in settings. It also stops the SIM from being read in some ROMs until the SIM is ejected and put back in after a reboot. The second sim reader stays active even if you rebrand back to a single sim ROM. I ultimately had to send my phone off to be repaired and they ended up replacing the mainboard under warranty.
Click to expand...
Click to collapse
I rebranded a dual sim to a dual sim. Like I said, all works fine, just a cosmetic issue.
Click to expand...
Click to collapse