Hi
I am stuck with Huawei Y511-U30 with black screen.
Phone is detected by PC.
I tried used SP flash.
Giving me different errors at different times.
Error 8 ,
BROM ERROR : S_DA_UNVALID_RANGE (3036)
NAND Flash was not detected!
BROM ERROR : S_DL_READ_PT_FAIL (5073)
Any help will be appreciated.
Your comment is awaiting moderation.
Related
Hi,guys......my phone is dead and its not turning on.....flash many times and its give dram errror and pmt error pls help me....those who know to unbrick it is hard bricked.....
Hello Guys,
I have a Huawei Ascend G730 (Model: HUAWEI G730-U10). No boot, No power up, No nothing, but when plugged in a computer, the computer detects it. It detects it as an MTK Device.
I tried flashing it with SP FLASH Tools (I used at least 5 roms), all failed. It's an SP FLASH Error (“BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) ).
I tried searching for results on the interwebs but to no avail.
I also saw this (https://forum.xda-developers.com/general/xda-assist/brom-error-sftenabledramfail-0xfc0-sp-t3378499). But that guy was met with a stock answer.
If anyone knows. Pls do help.
Thanks in Advance.
MujinFaye said:
Hello Guys,
I have a Huawei Ascend G730 (Model: HUAWEI G730-U10). No boot, No power up, No nothing, but when plugged in a computer, the computer detects it. It detects it as an MTK Device.
I tried flashing it with SP FLASH Tools (I used at least 5 roms), all failed. It's an SP FLASH Error (“BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) ).
I tried searching for results on the interwebs but to no avail.
I also saw this (https://forum.xda-developers.com/general/xda-assist/brom-error-sftenabledramfail-0xfc0-sp-t3378499). But that guy was met with a stock answer.
If anyone knows. Pls do help.
Thanks in Advance.
Click to expand...
Click to collapse
Greetings and welcome to assist. Unfortunately I can not find any answers to your problem but several users who have had this issue with mtk devices. It does sound like your memory chip has failed unfortunately but I do hope I'm wrong
Good Luck
Sawdoctor
Hi guys. I have 64gb mate 8 4gb ram. I was on nxt l29c185b200.
SRK tool video is pretty cool but somboons isn't the best at clarifying things too much, for eg if you were or are on c185b200, you don't need to use srk tool to rebrand to c432b560. Of course I didn't know that until much later. Which is why im extrmley ticked off.
In any case. I only have access to Huawei erecovery and rescue mode. In rescue mode I get in red : attention. Please update system again.
At the bottom I have error function NO : 10 boot image in brackets and beneath that I also error NO : 2 load failed also in brackets.
I've tried using SRK tool to install twrp again but all I get is waiting for device in SRK tool.
I'm in serious need of assistance, what steps can I take in srk tool? Or what else can I do to unbrick this?
ubermorgan said:
Hi guys. I have 64gb mate 8 4gb ram. I was on nxt l29c185b200.
SRK tool video is pretty cool but somboons isn't the best at clarifying things too much, for eg if you were or are on c185b200, you don't need to use srk tool to rebrand to c432b560. Of course I didn't know that until much later. Which is why im extrmley ticked off.
In any case. I only have access to Huawei erecovery and rescue mode. In rescue mode I get in red : attention. Please update system again.
At the bottom I have error function NO : 10 boot image in brackets and beneath that I also error NO : 2 load failed also in brackets.
I've tried using SRK tool to install twrp again but all I get is waiting for device in SRK tool.
I'm in serious need of assistance, what steps can I take in srk tool? Or what else can I do to unbrick this?
Click to expand...
Click to collapse
you managed to recover your equipment, mine is the same., only error mode ... y bootlop infinito error mode
error function NO : 8 (hifi image) error NO : 1 security verify failed
Please Help Me!
I flashed my device with wrong TWRP on Infinix Note 7, after that I tried to flash the original firmware of the mobile from SP FLASH TOOL, I always encounter the problem "BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)", I've tried by pressing the top volume and power button, the down volume button, both buttons and power, only power. But still always get the problem "BROM ERROR: STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)"
Maybe someone can help me with my problem, Because I'm a beginner in this.
Thanks!
Tech.
Solution: Found the solution after 6 months, and created a thread. Solution is explained there in detail: Infinix Bootloop Fix
Look inside here:
List of sp flash tool error codes, meanings & how to fix (solution)
Smart Phone Flash Tool also known as SP Flash Tool is a Desktop application used to flash firmware to Mediatek (MTK) Android devices. Its a pretty easy tool to use but you're bound to encounter one er
forum.hovatek.com
TechySkills said:
Please Help Me!
I flashed my device with wrong TWRP on Infinix Note 7, after that I tried to flash the original firmware of the mobile from SP FLASH TOOL, I always encounter the problem "BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)", I've tried by pressing the top volume and power button, the down volume button, both buttons and power, only power. But still always get the problem "BROM ERROR: STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)"
Maybe someone can help me with my problem, Because I'm a beginner in this.
Thanks!
Tech.
Click to expand...
Click to collapse
Look for bypass utility and its instructions. It will help beat this error
I did flashed my mobile with the proper tools. Still same error.
Whenever I go to clear the emmc it gives me an error saying emmc is busy at the moment
Any possible solutions please??
Thanks alot