Database Info

Usable armband?

Could anyone suggest subject?
Sent from my SCH-I500 using XDA App

Friend of mine ordered the smaller version of the tunebelt and he's ecstatic over it. He's been through a couple too.

My wife loves her tunebelt, not too expensive on amazon either.
Sent from my Voodoo Fascinate using XDA App

Thanks for reply guys!
I was looking at the same model.
AlgorithmX, because you have it, could you comment on quality and usability. I need this thing mostly for sports. It's kind of difficult to judge on picture. Does touch still works through that plastic? How it holds moisture? And how good is velcro?

I posted in the Vibrant and i9000 forums, but I got the larger version of the Tune Belt. It fits with my phone still inside it's TPU case which is what I was looking for. I think the smaller version would be too tight if you want to keep it in your case.
If you have above average sized biceps, you will need the extension as the band is one of the shorter ones I've seen, but luckily the extension is very cheap and works well.
Here are some pics.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks for good pictures!
No hole for a headphones cord?
And how do I know what is bigger/smaller version? I have only thin silicone on my phone and do not want to take it off every time.

CNemo7539 said:
Thanks for good pictures!
No hole for a headphones cord?
And how do I know what is bigger/smaller version? I have only thin silicone on my phone and do not want to take it off every time.
Click to expand...
Click to collapse
The headphone cord comes out of the flap at the top. I can take a picture later, but it's the same open you slide the phone into, so there's plenty of room.
The model numbers tell you if it's the smaller one or larger one. As you can see in my pics, my phone has a TPU case on it and fits very well inside the armband.
AB82 = Smaller
AB83 = Larger

Finally got my paws on it and used it for a while.
IMHO, this armband is useless for sports. It is like a sponge!
I got bigger version and it fits the phone in the silicon case. However seams inside do not allow plastic to touch the screen, so it's pretty difficult to control phone on the run.

CNemo7539 said:
Finally got my paws on it and used it for a while.
IMHO, this armband is useless for sports. It is like a sponge!
I got bigger version and it fits the phone in the silicon case. However seams inside do not allow plastic to touch the screen, so it's pretty difficult to control phone on the run.
Click to expand...
Click to collapse
I'm assuming you're talking about the TuneBelt right? If so, it's neoprene. While it may "retain" sweat/moisture, it shouldn't absorb it, neoprene is basically sweat proof. It "retains" some of it temporarily, because the material is breathable (which you definitely want) I have the smaller ab82 that I used with my Touch Pro, and I can tell you from using it at the gym a bunch, if you check it a few hours later, it should be bone dry again as the sweat evaporates out of it, doesn't leave it gross or smelly, etc. Wetsuits are made out of the same material for this sorta reason.
As for the seams on the screen.. ya it looked that way in the pictures above. Still, looks to be the only good solution out currently for phones as big as ours.

Seido Surface Case (Looks nice n thinnn)

Just came across this, BUT unfortunately its "Coming Soon."
The SURFACE™ case is the right case for those who are looking for sleek protection. This case protects your Samsung Infuse 4G from scratches and drops while adding minimal bulk. Durable plastic is accompanied by our soft-touch coating which enhances the look of your Samsung Infuse 4G without attracting lint.
- Sleek case that provides scratch protection without adding much bulk
- Precision cut-outs for access to the ports, controls, speakers and camera
- Unique slide-in design makes putting on and removing your case easy
- Compatible with SURFACE™ holster (not included)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

PS, its coming in the following colors:
Black, Sapphire Blue, Burgundy, Amethyst
and
you can get it with or without a holster.

Any idea how long its going to take to come to market? Is it more like a few weeks or months. Is was just about to get a skinomi skin for the phone and a leather carrying case 4 work but I will be more interested in this if this and the holster would be available within the next few weeks

No going to make it.
I called and the person on the phone said they won't be making the case. Hope they are wrong.

I had emailed them on thursday or friday and receive a quick reply back stating that it isnt available yet but to keep checking back on the website because it is updated first.

Ok great i figured the guy i talked to really don't know what was going on.

According the the website, they are NOW SHIPPING in BLACK.
And i just contacting them and as the website says, IN STOCK.

I just received my combo case.. It's very nice, the purple(amethyst) is shipping now also...

I just received this case in the mail. Any tips on how to remove this thing?

I had to basically destroy mine to get it off. Its an awesome case if you never want to remove it...
Sent from my SAMSUNG-SGH-I997R using XDA Premium App

Notnilc said:
I had to basically destroy mine to get it off. Its an awesome case if you never want to remove it...
Sent from my SAMSUNG-SGH-I997R using XDA Premium App
Click to expand...
Click to collapse
No need to be so dramatic...
It IS basically impossible to remove without tools, but pretty easy with a little help.
I used a razor blade to carefully lift the bottom piece of the shell up so it would release the latch from the top piece (without doing ANY damage to the phone or case). Next time I need to get it off, I think I'm going to try a thin guitar pick, since I won't have to be so carefull with those rounded edges...
I'll let ya'll know how it goes.
EDIT:
I think I like the tight fit on my phone, but for those of you who anticipate having to get at the sim, sd, and battery often - you might think about putting a piece of scotch tape between the two halves of the shell. The case will still hold on pretty well, but you won't have ANY problem getting it apart without tools in a hurry...

Rock Quicksand Case Review

This review is for the international version of the Rock Quicksand Case in Gray, being used on the At&t HTC One X.
The holes are a little misaligned, but it has no impact on usage or performance.
The case has a nice, soft feel to it. I would say it is somewhere between felt and super fine sand paper (it isn't going to scratch you).
It is a very thin case and doesn't add much to the overall bulk of the phone.
On the camera there is a lip to protect it from scratches when it is set down.
There is a bit of a lip over the front of the screen, but I couldn't tell you which would hit the ground first first, as it's pretty level with the raise due to my screen protector.
The cutouts look nice, but one thing to keep in mind is that neither the top nor bottom are covered. I would say that the lip from the corners would take most of the impact if it is dropped on its head though.
Overall,
This is the best case I have ever had. The case has a great feel and look, and doesn't add too much bulk, while protecting it from nicks due to being dropped.
Hope that helps!
Front
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Back
Camera
Texture

I just got the black one (http://www.amazon.com/Rock-Black-Composite-Quicksand-Poly-carbonate/dp/B0089DRQL6/ref=sr_1_1?ie=UTF8&qid=1350374497&sr=8-1&keywords=rock+quicksand+one+x) today and it's awesome! Very very thin,and fits quite snugly. The back is protected very well against scratches. This definitely includes the camera lens, which is one of my main concerns.
The screen and most of the front is not protected very much at all. I certainly wouldn't set my phone facing down on a table. On the other hand, that means that swiping from side to side is great. I remember there was no way to swipe between Google Chrome tabs with my old jelly case. The slightly rough material on the back is great for gripping the phone, and it doesn't pick up lint like the jelly cases do.

Thanks alot for your review!

Also appreciate the review - looks pretty good. Thanks for taking the plunge with an International case on an AT&T variant. I really don't understand why manufacturer's aren't making more AT&T specific cases still.
Have you used any USB cables other than the stock HTC one with this case? I have a few different USB cables and am afraid they may not all fit with the case on. Any pictures you can provide with the case on and cable in would be great.

A case like this would never work for me. 100% of the time I drop my phone, it lands screen down. :crying:

Also appreciate the review - looks pretty good. Thanks for taking the plunge with an International case on an AT&T variant. I really don't understand why manufacturer's aren't making more AT&T specific cases still.
Have you used any USB cables other than the stock HTC one with this case? I have a few different USB cables and am afraid they may not all fit with the case on. Any pictures you can provide with the case on and cable in would be great.
Click to expand...
Click to collapse
I've used 3 USB cables other than stock and they all work without any hassle. The cutout for the microUSB is rather large (which can be seen in the 1st and 2nd pictures), and unless your using some monster USB cable (I haven't seen one before) it shouldn't be a problem at all.

AJerman said:
A case like this would never work for me. 100% of the time I drop my phone, it lands screen down. :crying:
Click to expand...
Click to collapse
Me too! that's why I use a screen protector (only cost like $10 for a decent one on amazon). I've dropped it on asphalt face down from waist high and nothing happened.

I've had this case since last Friday and it's awesome. It's extremely light, thin, and has a fantastic texture that gives it a great grippy-ness.

case recomendations

Due to a lack of official cases I was wandering what people here would recommend ? Personally I would need one that also holds a mac keyboard and mouse, but would also be good to share any that you think are a good size, quality and style.

lumpaywk said:
Due to a lack of official cases I was wandering what people here would recommend ? Personally I would need one that also holds a mac keyboard and mouse, but would also be good to share any that you think are a good size, quality and style.
Click to expand...
Click to collapse
Actually there are two official cases - sleeves actually - one is by Incipio - its a basic sleeve case and works fine - it has a matching color strip to coordinate with your keyboard color ( if that really matters ) - its OK but overpricied. Got mine for $34.95 because they were priced wrong and the store honored the marked price. They are normally 49.95 I believe which is a bit expensive for a nylon case. You can get a real leather case for other devices for that price.
Here's a video http://www.youtube.com/watch?v=bjsQFAJF9K4
There is also another very similar sleeve available also from the Microsoft stores, but I don't recall the name.
Both are available from the walk-in Microsoft stores, and I imagine should be available from the online store as well. Don't think any case made for the Surface will hold a Macbook keyboard and mouse though. These cases are made just big enough for the surface and its own keyboard.

K cool, sorry I'm in the uk and so have not seen these, it looks really nice maybe will have to think about a sleeve in a laptop bag. All I need to do is find a uk reseller.

ROCK Texture for the Window Surface. Simple but not shabby case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

That rock one looks like it'll suffer from the same issues as the stock samgung one i had on my xe700, there is nothing clipping it shut so its free to open up and flap about on its own..
I'm currently waiting for this one to arrive from Amazon..
http://www.amazon.co.uk/gp/product/B00A1F22JG/ref=oh_details_o01_s00_i00
Will let you know how I get on it with as I'm in the UK as well.

There's a (very weak) magnet in the Touch/Type covers... not enough to hold them closed very well, but it helps. (I think its main purpose is actually to trigger the "is the cover closed?" sensor.) This cover could offer the same.
That said, given the great durability of the Surface's magnesium body and the fact that pretty much everybody will have a cover already, I don't really see the need for this. It amuses my that they provide their own kickstand (after covering the built-in one)... although this one is probably adjustable-angle, which the built-in one is not.

Can it be used with a touch keyboard - If not, that kind of is a deal killer. Price is also a little steep.
I am using a case I bought on Amazon made by Manvex for $15. Its a great case, works great with the keyboard, and has a magnetic clasp. the only bad part is it sits around the screen edge and makes it tough to swipe in. I contacted the company and they are in the process of redesigning it to solve that problem. If they incorporate a similar fitting system to this one, it will be a great case.

Given that most of the bottom of the tablet ()everything except the corners) is uncovered when open, Touch and Type covers should connect with no problem.

Trig0r said:
That rock one looks like it'll suffer from the same issues as the stock samgung one i had on my xe700, there is nothing clipping it shut so its free to open up and flap about on its own..
I'm currently waiting for this one to arrive from Amazon..
http://www.amazon.co.uk/gp/product/B00A1F22JG/ref=oh_details_o01_s00_i00
Will let you know how I get on it with as I'm in the UK as well.
Click to expand...
Click to collapse
There is a rubber band to actually close the flip so it will not open.

The one I mentioned has turned up, works fine..
Certainly worth the £13 lol

[Q] Case that doesn't overlap front

I used to have an iphone 4 and I had a nice clear case that gripped the sides of the case without overlapping the front. I would really like to have something like that for the Nexus 4. Anything that has a lip over the front tends to collect pocket dust like crazy and clear cases seem harder to find for android phones. I don't want anything that is silicon. I don't know if what I want is really possible, the iphone had that infamous metal ring that gave the case something to grip on without going over the front.

Yeah that's a tough one, I think most people actually like to have the overlapping on the front so the screen doesn't contact a surface if it's face down. When looking up cases they point that out too as one of the pro's of their case.
I'm sure more cases and options will come out for this phone, they were probably waiting to see the actual demand for this phone and it seems there is more demand for this phone then companies thought there would be.
I'm waiting for something like Spigen has for the iphone, it looks like a bumper with a clear part on the back. Not sure if they'll make that either, if not I'll stick to finding a good bumper.

I'm in the same boat. I was actually looking at one last night but now I can't find it!
What it did was overlapped only on the corners. So, the corners were protected and the face of the phone wouldn't touch when lying face-down, but you still had the ability to easily use gestures on the curved screen.

I believe this will do what you want http://www.rearthusa.com/google-nexus-4-ringke-slim-case they aren't clear, but they have the most restricted fit http://www.rearthusa.com/google-nexus-4-ringke-slim-case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 05:07 AM ---------- Previous post was at 05:05 AM ----------
It looks like it's only a pre order, but these fit fairly "slim"

That case would be so perfect for me if it had the back cut out to show the glass back design. Be a shame to cover it up.
Sent from my Nexus 4 using Tapatalk 2

Chrono_Tata said:
That case would be so perfect for me if it had the back cut out to show the glass back design. Be a shame to cover it up.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
It is a shame but most people with clear cases end up with yellowish tinted case after getting it dirty. Also, the rearth ringke cases are I believe still slippery, not much grip compared to diztronics or other brands.

cavallino33 said:
I used to have an iphone 4 and I had a nice clear case that gripped the sides of the case without overlapping the front. I would really like to have something like that for the Nexus 4. Anything that has a lip over the front tends to collect pocket dust like crazy and clear cases seem harder to find for android phones. I don't want anything that is silicon. I don't know if what I want is really possible, the iphone had that infamous metal ring that gave the case something to grip on without going over the front.
Click to expand...
Click to collapse
The nillkin case is just beautiful and just cost 10 dollars

I don't know I think I may just go caseless and rely on the scratch resistance of gorilla glass. I am not worried about drops I can prevent that, it just seems silly to put a case on to protect the pretty back when it obscures the pretty back. Kind of like keeping a fancy watch in a safe so you don't scratch it.

bump