Related
How to set the settings like cpu frequency after installing elementalx kernel?
I installed the elementalx by using TWRP recovery in my nexus 5 (android 5.0.1), but how to set the settings like set the CPU frequency and enable double tap to wake up? Should I install some apps?
If I want to update later, should I install the origin kernel?
Thank you!!!
xcs1234 said:
How to set the settings like cpu frequency after installing elementalx kernel?
I installed the elementalx by using TWRP recovery in my nexus 5 (android 5.0.1), but how to set the settings like set the CPU frequency and enable double tap to wake up? Should I install some apps?
Click to expand...
Click to collapse
From ElementalX thread:
The config file is located at /etc/elementalx.conf. You can edit this file to change kernel settings. Whatever is set in this file will take effect when the device is booted (unless other scripts or apps interfere!)
Read OP for more details.
xcs1234 said:
If I want to update later, should I install the origin kernel?
Thank you!!!
Click to expand...
Click to collapse
Nope
xcs1234 said:
How to set the settings like cpu frequency after installing elementalx kernel?
I installed the elementalx by using TWRP recovery in my nexus 5 (android 5.0.1), but how to set the settings like set the CPU frequency and enable double tap to wake up? Should I install some apps?
If I want to update later, should I install the origin kernel?
Thank you!!!
Click to expand...
Click to collapse
I've been using ElementalX for some time. There's an app in the play store specifically for ElementalX kernel.
I always installed the kernel with default settings in AROMA installer since the app lets you tune all the values anyway
experience7 said:
I've been using ElementalX for some time. There's an app in the play store specifically for ElementalX kernel.
I always installed the kernel with default settings in AROMA installer since the app lets you tune all the values anyway
Click to expand...
Click to collapse
what's the name of that app?
ElementalX kernel
Here's the Play Store link: https://play.google.com/store/apps/details?id=flar2.elementalxkernel
Primokorn said:
From ElementalX thread:
The config file is located at /etc/elementalx.conf. You can edit this file to change kernel settings. Whatever is set in this file will take effect when the device is booted (unless other scripts or apps interfere!)
Read OP for more details.
Nope
Click to expand...
Click to collapse
If I want to install another kernel, can I just install it in the recovery(using the install button in the recovery mode)? Should I clean the present kernel, then install another kernel in the recovery?
There are recommendations that you should dirty flash the original ROM (which then overwrites your current kernel with the stock one). If you're on stock Android (Vanilla), fastboot flash the boot.img from the appropriate factory image. Then use your recovery to install zip > choose your kernel zip.
I've always used the 'easy method' by just dirty-flashing the kernel I want to try. Worked fine all the time [emoji14]
This is a module for the stock kernel that enables color control (RGB, Saturation, Hue, Contrast and Value).
This is the KCAL advanced color control driver by @savoca, but I've modified it to compile as a module so it can be used on the stock kernel.
This works with stock kernel on 1.32, 1.40, 2.7 and 3.35 (Marshmallow) bases
If you want it to load automatically, you need to be rooted with SuperSU
If you want to thank me, use my app, EX Kernel Manager. It has full control of everything, including advanced color control and the ability to save and load color profiles.
Download:
Stock kernel perf-g9fb087d (3.35 base - Marshmallow)
https://www.androidfilehost.com/?fid=24369303960689724
Stock kernel perf-ga10e09f (2.7 base)
https://www.androidfilehost.com/?fid=24052804347765919
Stock kernel g4ee4c46 (1.40 base)
https://www.androidfilehost.com/?fid=23991606952613459
Stock kernel ga24f2d5 (1.32 base)
https://www.androidfilehost.com/?fid=23991606952601064
Source code:
https://github.com/flar2/ElementalX-m9/tree/kcal_module
XDA:DevDB Information
Color Control Module, Kernel for the HTC One (M9)
Contributors
flar2
Kernel Special Features:
Version Information
Status: Testing
Created 2015-05-10
Last Updated 2016-01-20
Value and Contrast seem to be not working correctly with apps, let me see what I can do.
flar2 said:
Value and Contrast seem to be not working correctly with apps, let me see what I can do.
Click to expand...
Click to collapse
They don't stick, but the value seems like working correctly.
I'm using original app BTW.
Update!
v2 fixes the problem with value and contrast. As far as I can tell, it works flawlessly now.
How do i install this? Do i need to root?
Karl-Johan said:
How do i install this? Do i need to root?
Click to expand...
Click to collapse
Flash in recovery. Root is required
Can you ghow us your settings?
Sent from my HTC One M9 using XDA Free mobile app
shino82 said:
Can you ghow us your settings?
Sent from my HTC One M9 using XDA Free mobile app
Click to expand...
Click to collapse
Something like this, but all screens and users are different.
Big thanks @flar2 for sharing your work.
I am no M9 user but compiled this module for my device (togari) against my Kernel Source and it worked just fine, thanks for this, i would have never came on the idea to built kcal as a loadable module.
Tommy-Geenexus said:
Big thanks @flar2 for sharing your work.
I am no M9 user but compiled this module for my device (togari) against my Kernel Source and it worked just fine, thanks for this, i would have never came on the idea to built kcal as a loadable module.
Click to expand...
Click to collapse
Yup, this should work for almost every Qualcomm device
When I set and save the settings with your kernel manager, it boota with different setting @flat2
I paid for your app.
ahrion said:
When I set and save the settings with your kernel manager, it boota with different setting @flat2
I paid for your app.
Click to expand...
Click to collapse
I just tried it and it works fine.
Are you clicking the apply on boot switch?
Is the module loading automatically at boot?
Do you have other apps interfering?
Edit: DELETED WRONG THREAD
I have rooted my phone and flashed TWRP and this kcal_mod but I don't know how it works. What do I do next?
Instructions in 1st post would be great. I have no clue how this works.
Change settings as follows
R. 140
G. 135
B. 150
Sat. 42
Value. 134
Contrast 130
Hue 16
This is a good guideline
Karl-Johan said:
I have rooted my phone and flashed TWRP and this kcal_mod but I don't know how it works. What do I do next?
Instructions in 1st post would be great. I have no clue how this works.
Click to expand...
Click to collapse
you need an app to alter the values.
use that: https://play.google.com/store/apps/details?id=flar2.exkernelmanager
or that http://downloads.codefi.re/savoca/kcal
j to the 4n said:
you need an app to alter the values.
use that: https://play.google.com/store/apps/details?id=flar2.exkernelmanager
or that http://downloads.codefi.re/savoca/kcal
Click to expand...
Click to collapse
How do I know if the zip installed correctly? I tried both of the apps you link to, cant find any settings in EX Kernel Manager and Color Control says "KCAL support not found!".
I'm running stock kernel by the way. Installed the Kcal_mod in TWRP thorugh Install option and then selected zip and installed, no error showed up.
Karl-Johan said:
How do I know if the zip installed correctly? I tried both of the apps you link to, cant find any settings in EX Kernel Manager and Color Control says "KCAL support not found!".
I'm running stock kernel by the way. Installed the Kcal_mod in TWRP thorugh Install option and then selected zip and installed, no error showed up.
Click to expand...
Click to collapse
It sounds like the module is not compatible with your kernel. It only works with the exact kernel version specified in the OP.
Here's what you can do:
1. Do a nandroid backup of /system and /boot.
2. Download this stock kernel (from the leedroid thread): http://www.leedroid.co.uk/Stock-M9-Kernel.zip
3. Re-install the color module and it should be working
I'm 99% sure the stock kernel I linked will work for you, if not, restore the backup. That's why I suggested making the back up in step 1.
flar2 said:
It sounds like the module is not compatible with your kernel. It only works with the exact kernel version specified in the OP.
Here's what you can do:
1. Do a nandroid backup of /system and /boot.
2. Download this stock kernel (from the leedroid thread): http://www.leedroid.co.uk/Stock-M9-Kernel.zip
3. Re-install the color module and it should be working
I'm 99% sure the stock kernel I linked will work for you, if not, restore the backup. That's why I suggested making the back up in step 1.
Click to expand...
Click to collapse
Trying to backup system partition but it keeps failing right at the beginning. Boot partition worked fine.
Karl-Johan said:
Trying to backup system partition but it keeps failing right at the beginning. Boot partition worked fine.
Click to expand...
Click to collapse
Got to the TWRP thread and see if they can help you get the system backup. It's important to back up /system because that is where the kernel modules are located. They must match the running kernel. At the very least, you would have to backup /system/lib/modules and the boot partition.
my phone is 100% rooted and has the latest su binary installed.
most of root apps work fine but recently i have faced problems with two apps which are Psiphon and Tasker.
-When i tick "force root tunnel" in psiphon, it says "root mode is not supported for this version of android" and confirmation box of superuser didnt show at all.
(force root tunnel means tunneling the device without using the built-in VPN service API like in android 2.3)
-Tasker does not request for su permission when force kill (root access) is checked.
FinnTheHuman. said:
my phone is 100% rooted and has the latest su binary installed.
most of root apps work fine but recently i have faced problems with two apps which are Psiphon and Tasker.
-When i tick "force root tunnel" in psiphon, it says "root mode is not supported for this version of android" and confirmation box of superuser didnt show at all.
(force root tunnel means tunneling the device without using the built-in VPN service API like in android 2.3)
-Tasker does not request for su permission when force kill (root access) is checked.
Click to expand...
Click to collapse
Greetings and welcome to assist. Have you tried usinf phh Superuser instead of SU to see if that makes a difference ? Flashing the latest phh superuser will also remove the su apk for you as well
Good Luck
Sawdoctor
sawdoctor said:
Greetings and welcome to assist. Have you tried usinf phh Superuser instead of SU to see if that makes a difference ? Flashing the latest phh superuser will also remove the su apk for you as well
Good Luck
Sawdoctor
Click to expand...
Click to collapse
i couldnt flash phh superuser.zip via twrp because it says cant install zip file. any solution?
FinnTheHuman. said:
i couldnt flash phh superuser.zip via twrp because it says cant install zip file. any solution?
Click to expand...
Click to collapse
Did you get any sort of error from recovery ?
sawdoctor said:
Did you get any sort of error from recovery ?
Click to expand...
Click to collapse
I solved it.
installing phh needed the latest version of twrp (3.0.2)
after a successfull flash of the zip package (superuser.zip), I lost root access and the old superuser app from chainfire was deleted.
Can you tell me how to install phh step by step?
FinnTheHuman. said:
I solved it.
installing phh needed the latest version of twrp (3.0.2)
after a successfull flash of the zip package (superuser.zip), I lost root access and the old superuser app from chainfire was deleted.
Can you tell me how to install phh step by step?
Click to expand...
Click to collapse
Do you not have the new superuser app anywhere it should be there. Try installing the app from play store and see
https://play.google.com/store/apps/details?id=me.phh.superuser
Sent from my SM-N930F using Tapatalk
sawdoctor said:
Do you not have the new superuser app anywhere it should be there. Try installing the app from play store and see
https://play.google.com/store/apps/details?id=me.phh.superuser
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
I flashed the superuser.zip again and this time I wiped the dalvik cache. Now i got the root acces back but still the two apps Psiphon and tasker are NOT requesting for su permission while other apps have no problem with it.
http://m.imgur.com/Gvd4bQ7
http://imgur.com/P5s8Ea7
http://imgur.com/rtrn42h
I have another phone (android 2.3) rooted with kingroot and Psiphon seems to be compatible with kinguser
FinnTheHuman. said:
I flashed the superuser.zip again and this time I wiped the dalvik cache. Now i got the root acces back but still the two apps Psiphon and tasker are NOT requesting for su permission while other apps have no problem with it.
http://m.imgur.com/Gvd4bQ7
http://imgur.com/P5s8Ea7
http://imgur.com/rtrn42h
I have another phone (android 2.3) rooted with kingroot and Psiphon seems to be compatible with kinguser
Click to expand...
Click to collapse
I am out of idea's I'm afraid, it maybe worth asking in the tasker thread to see if anyone else is having this problem
sawdoctor said:
I am out of idea's I'm afraid, it maybe worth asking in the tasker thread to see if anyone else is having this problem
Click to expand...
Click to collapse
The problem is due to missing Tun module which is not available for my device. Galaxy core prime comes with a preloaded Tun module in the kernel and it's not replacable nor compatible with Psiphon.
Old VPN clients do not depend on the built in VPN service API but require a custom Tun module to perform the tunnel in root mode.
As for the tasker, a recommended modification on the build.prop fixed the issue.
Thanks anyway.
FinnTheHuman. said:
The problem is due to missing Tun module which is not available for my device. Galaxy core prime comes with a preloaded Tun module in the kernel and it's not replacable nor compatible with Psiphon.
Old VPN clients do not depend on the built in VPN service API but require a custom Tun module to perform the tunnel in root mode.
As for the tasker, a recommended modification on the build.prop fixed the issue.
Thanks anyway.
Click to expand...
Click to collapse
Glad you finally found your issue at least
Sawdoctor
Sent from my SM-N930F using Tapatalk
1. Get TWRP (Follow this guide: https://forum.xda-developers.com/t/proper-way-of-installing-twrp.4325927/)
2. Flash the vbmeta provided in the above thread
3. In TWRP, run the no verity patcher.
4. Get any A/B gsi ROM (Treble check lists wrong information)
5. Download the ChonDoe patcher
6. Rename ROM to System.img and put it on the internal storage in the same location as Chondoe patcher.
7. Run the patcher and ignore any fstab errors.
8. Success?
KNOWN BUGS: Touch isn't working after screen lock, reboot needed. Should be OK if you don't turn your screen off.
Enjoy!
There is no need for the chondoe patcher. And finaly i'm not the only one who getts does screen touch issues on gsi roms.
I don't know why you complicated it this much to install a gsi rom, it is:
1. boot in to twrp
2. wipe data, cache, dalvik
3. reboot to twrp
4. install gsi rom and reboot
and make sure dm-verify is allredy disabled.
The touch screen error is not solved if I lock and unlock the cell phone several times?
LAST_krypton said:
I don't know why you complicated it this much to install a gsi rom, it is:
1. boot in to twrp
2. wipe data, cache, dalvik
3. reboot to twrp
4. install gsi rom and reboot
and make sure dm-verify is allredy disabled.
Click to expand...
Click to collapse
How to disable dm-verity? I plan to try to install twrp to see if it works and try miui
BryanCp13 said:
How to disable dm-verity? I plan to try to install twrp to see if it works and try miui
Click to expand...
Click to collapse
You flash this file, then you format data. DO NOT rename the file.
LAST_krypton said:
There is no need for the chondoe patcher. And finaly i'm not the only one who getts does screen touch issues on gsi roms.
Click to expand...
Click to collapse
The error sucks, as anything else works great. I'll let you know if i get it fixed.
Will it be deep sleep related problem as the phone has no problems until you turned off the screen and on again?
If that is the case, using wakelock app with the CPU option enabled (which disables deep sleep) and wakelock settings> autostart on boot enabled, should make the device run fine.
However it increases idle battery drain by some extent, you have been informed about that.
Link is here.
Wakelock Revamp - PowerManager APK 3.4.0 for Android – Download Wakelock Revamp - PowerManager APK Latest Version from APKFab.com
Wakelock Revamp - PowerManager 3.4.0 latest version APK Download by darken for Android free online at APKFab.com. Easy control over Android's PowerManager.
www.google.com
LR7875 said:
Will it be deep sleep related problem as the phone has no problems until you turned off the screen and on again?
If that is the case, using wakelock app with the CPU option enabled (which disables deep sleep) and wakelock settings> autostart on boot enabled, should make the device run fine.
However it increases idle battery drain by some extent, you have been informed about that.
Link is here.
Wakelock Revamp - PowerManager APK 3.4.0 for Android – Download Wakelock Revamp - PowerManager APK Latest Version from APKFab.com
Wakelock Revamp - PowerManager 3.4.0 latest version APK Download by darken for Android free online at APKFab.com. Easy control over Android's PowerManager.
www.google.com
Click to expand...
Click to collapse
I'll try and tell you how it went. Thanks!
LR7875 said:
Will it be deep sleep related problem as the phone has no problems until you turned off the screen and on again?
If that is the case, using wakelock app with the CPU option enabled (which disables deep sleep) and wakelock settings> autostart on boot enabled, should make the device run fine.
However it increases idle battery drain by some extent, you have been informed about that.
Link is here.
Wakelock Revamp - PowerManager APK 3.4.0 for Android – Download Wakelock Revamp - PowerManager APK Latest Version from APKFab.com
Wakelock Revamp - PowerManager 3.4.0 latest version APK Download by darken for Android free online at APKFab.com. Easy control over Android's PowerManager.
www.google.com
Click to expand...
Click to collapse
Still happens, really weird
James 144 said:
Still happens, really weird
Click to expand...
Click to collapse
Well the touch screen works well until you turn the screen off and on?
What GSI do you use? Phh treble? Maybe erfangsi will work, but we don't know.
LR7875 said:
Well the touch screen works well until you turn the screen off and on?
What GSI do you use? Phh treble? Maybe erfangsi will work, but we don't know.
Click to expand...
Click to collapse
Phh Lineage 18.1. Doesn't work on normal phh treble either
I'll try erfangsi.
James 144 said:
Phh Lineage 18.1. Doesn't work on normal phh treble either
I'll try erfangsi.
Click to expand...
Click to collapse
All processes and services are running normal it is that the screen woun't recognize touch. By flashing a custom kernel and disabeling power saveing options could fix the problem.
James 144 said:
You flash this file, then you format data. DO NOT rename the file.
Click to expand...
Click to collapse
Will that remove the mount error when flashing the gsi?
LAST_krypton said:
All processes and services are running normal it is that the screen woun't recognize touch. By flashing a custom kernel and disabeling power saveing options could fix the problem.
Click to expand...
Click to collapse
Do I have to install yes or yes a kernel for that rom? (I am not Rot) since in another rom gsi it gave me mount error and permissions denied
BryanCp13 said:
Will that remove the mount error when flashing the gsi?
Click to expand...
Click to collapse
Yes.
LAST_krypton said:
All processes and services are running normal it is that the screen woun't recognize touch. By flashing a custom kernel and disabeling power saveing options could fix the problem.
Click to expand...
Click to collapse
I've found a telegram group where the rom creator is really active and willing to help. I already tried to solve it but I'm busy. Here's the link: Device name? GSI version? - #phh-treble https://t.me/phhtreble/283195 <---. Tell them that Kuba invited you and they should know that they should help with the touch screen. Rom creator said that it's 100% fixable.
what treble type is a12 has?
Jayke770 said:
what treble type is a12 has?
Click to expand...
Click to collapse
A/B. Some apps say A only but that is wrong
Hello everyone, I just installed another rom for my redmi note 11 which is Project Elixir.
I have successfully installed magisk module viper4android .
BUT when it comes to driver installation it shows error "Error: No such file or directory" and the installation is stuck at 11%.
I have tried many ways like reinstalling but it still doesn't work.
Does anyone know how to fix this error. Help me! I love listening to music so I really need this
What is Magisk V4A module version?
10.16.2020 ?
jwoegerbauer said:
What is Magisk V4A module version?
10.16.2020 ?
Click to expand...
Click to collapse
V2.7.2.1 . And magisk just released a new update which is 26.1 so i updated it
The module is heavily outdated: look here
GitHub - Magisk-Modules-Repo/ViPER4Android-FX
Contribute to Magisk-Modules-Repo/ViPER4Android-FX development by creating an account on GitHub.
github.com
It's because of the Magisk version, it also happened to me but I fixed it.
You must uninstall Magisk 26, if you don't know how, just rename "Uninstall.zip" the magisk that you flashed in your recovery, just after a previous version of Magisk is uninstalled, in my case I had Magisk 25 on my SD, with this you will not lose the modules that you had previously installed and you will be able to install Viper without problems.
This worked for me.
hgrocket said:
It's because of the Magisk version, it also happened to me but I fixed it.
You must uninstall Magisk 26, if you don't know how, just rename "Uninstall.zip" the magisk that you flashed in your recovery, just after a previous version of Magisk is uninstalled, in my case I had Magisk 25 on my SD, with this you will not lose the modules that you had previously installed and you will be able to install Viper without problems.
This worked for me.
Click to expand...
Click to collapse
Has been successful. Thank you very much
Ihave same problem, ater i installee magisk to 26 how to fix
fivux69 said:
Ihave same problem, ater i installee magisk to 26 how to fix
Click to expand...
Click to collapse
Looks like my answer above has worked, check it out.
fivux69 said:
Ihave same problem, ater i installee magisk to 26 how to fix
Click to expand...
Click to collapse
I'm too still having this issue despite downgrading to magisk 26
Mr.Blaze said:
Tôi vẫn gặp sự cố này mặc dù đã hạ cấp xuống magisk 26
Click to expand...
Click to collapse
try install magisk version 25.2
I had the same problem. I was able to solve with https://github.com/programminghoch10/ViPER4AndroidRepackaged under crdroid.
RichieXX said:
I had the same problem. I was able to solve with https://github.com/programminghoch10/ViPER4AndroidRepackaged under crdroid.
Click to expand...
Click to collapse
I already tried it + many different versions, but unfortunatelly no matter what version I use, i still didn't get it to work
I have a solution.
Install this magisk module
GitHub - programminghoch10/ViPER4AndroidRepackaged: A refined ViPER4Android installer.
A refined ViPER4Android installer. Contribute to programminghoch10/ViPER4AndroidRepackaged development by creating an account on GitHub.
github.com
And then open the app and turn off legacy and compatibility mode (if turned on)
Now still the app somehow doesn't work. To fix this, go to play store, install an app called wavelet. Now open it and set it to legacy mode. Tun it on and turn on some option in it which makes no impact to the sound output.
Now when you go to viper4 Android, it will show processing as yes and it will work.
****Make sure that Master Limiter is turned on
NikhilYT said:
I have a solution.
Install this magisk module
GitHub - programminghoch10/ViPER4AndroidRepackaged: A refined ViPER4Android installer.
A refined ViPER4Android installer. Contribute to programminghoch10/ViPER4AndroidRepackaged development by creating an account on GitHub.
github.com
And then open the app and turn off legacy and compatibility mode (if turned on)
Now still the app somehow doesn't work. To fix this, go to play store, install an app called wavelet. Now open it and set it to legacy mode. Tun it on and turn on some option in it which makes no impact to the sound output.
Now when you go to viper4 Android, it will show processing as yes and it will work.
****Make sure that Master Limiter is turned on
Click to expand...
Click to collapse
I tried your steps, but it doesn't work (version 69 from repo).
The problem is with the installation, not the sound processing.
So we can't do the step "And then open the app and turn off legacy and compatibility mode (if turned on)", because once we open the Viper4android app it tries to install the magisk module, and then it gets stuck.
phmha said:
try install magisk version 25.2
Click to expand...
Click to collapse
This seems to solve the stuck installation issue.
But now after every reboot it tries to install the driver again for me.
I tried different things to fix this (audio modification library, this: https://forum.xda-developers.com/t/...ndroid-10-11-12-devices.4213647/post-86907017 and this: https://forum.xda-developers.com/t/...ndroid-10-11-12-devices.4213647/post-86870983 and this:
https://www.reddit.com/r/Magisk/comments/x1f14z/_/imhmm1c
) but still no luck. Also different versions of viper don't solve this issue.
phmha said:
try install magisk version 25.2
Click to expand...
Click to collapse
This seems to solve the stuck installation issue.
But now after every reboot it tries to install the driver again for me.
I tried different things to fix this (audio modification library, this: https://forum.xda-developers.com/t/...ndroid-10-11-12-devices.4213647/post-86907017 and this: https://forum.xda-developers.com/t/...ndroid-10-11-12-devices.4213647/post-86870983 and this:
https://www.reddit.com/r/Magisk/comments/x1f14z/_/imhmm1c
) but still no luck. Also different versions of viper don't solve this issue.
Edit: This V4A works for me partially (some options are greyed out) with magisk 25.2 (didn't test newer) and legacy mode enabled:
viper4android 0.3.0 - Google Search
RichieXX said:
I had the same problem. I was able to solve with https://github.com/programminghoch10/ViPER4AndroidRepackaged under crdroid.
Click to expand...
Click to collapse
Works perfectly dude, thank you so much
Tested on Android 13, Xiaomi Mi 9T Pro, bootleggers v7.1
Mr.Blaze said:
This seems to solve the stuck installation issue.
But now after every reboot it tries to install the driver again for me.
I tried different things to fix this (audio modification library, this: https://forum.xda-developers.com/t/...ndroid-10-11-12-devices.4213647/post-86907017 and this: https://forum.xda-developers.com/t/...ndroid-10-11-12-devices.4213647/post-86870983 and this:
https://www.reddit.com/r/Magisk/comments/x1f14z/_/imhmm1c
) but still no luck. Also different versions of viper don't solve this issue.
Edit: This V4A works for me partially (some options are greyed out) with magisk 25.2 (didn't test newer) and legacy mode enabled:
viper4android 0.3.0 - Google Search
Click to expand...
Click to collapse
So the issue was Magisk 26?
NikhilYT said:
I have a solution.
Install this magisk module
GitHub - programminghoch10/ViPER4AndroidRepackaged: A refined ViPER4Android installer.
A refined ViPER4Android installer. Contribute to programminghoch10/ViPER4AndroidRepackaged development by creating an account on GitHub.
github.com
And then open the app and turn off legacy and compatibility mode (if turned on)
Now still the app somehow doesn't work. To fix this, go to play store, install an app called wavelet. Now open it and set it to legacy mode. Tun it on and turn on some option in it which makes no impact to the sound output.
Now when you go to viper4 Android, it will show processing as yes and it will work.
****Make sure that Master Limiter is turned on
Click to expand...
Click to collapse
I did it and it works. thank you!
FJiron75 said:
I did it and it works. thank you!
Click to expand...
Click to collapse
Your welcome!