Database Info

[Q] Please help about updating my phone

Please i need your help about :
my phone is samsung galaxy i9003
my software now is jelly bean 4.1.2
I need to update my phoen to jb 4.2.2
can any one help me ??
i posted this thread in Q and A and no one help me
Please i need help
all i need to update my phone from android 4.1.2 to 4.2.2
please help me
Thanks ,,,

Hey bro follow this to make clean install (but this will wipe your data)
DO IT AT YOUR OWN RISK
1- make sure you have kies installed or just install galaxy sl usb drivers (thanks to Zulfauzi).
2-Download odin3 v1.85 from the attachments.
3-Download full DDLF2 from here (thanks to (thanks to sgatechwork).
4. Run Odin3 v1.85.
5. Check Re-Partition, Auto Reboot and F. Reset Time.
6. Click PIT button and select this file: latona_20110114.pit
7. Set it to download mode : Press Volume down + OK first, then hold Power button.
8. Connect USB cable and the program will detect the phone's Com number.
9. Click Start button to download the PIT file to phone.
10. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir].
11. Click PDA button and select this file: CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
12. Click PHONE button and select this file: MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5.
13. Click BOOTLOADER button and select this file: APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
14. Click CSC button and select this file: GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5.
15: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!].
16. Click Start button to flash these files to phone.
17. Do not touch anything till you see PASS on the program window.
18. Factory reset.
19. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
thanks to Misledz for the instructions (original thread here)(I only edited file names).
Now download any Jb 4.2.2 rom and carefully follow the OP instructions.
I suggest CM10.1 A8 by dhiru1602 (thanks to him), rom is verry stable and smooth.
if I helped you please hit the "thanks" button
Best regards

ASMI1 said:
Hey bro follow this to make clean install (but this will wipe your data)
DO IT AT YOUR OWN RISK
1- make sure you have kies installed or just install galaxy sl usb drivers (thanks to Zulfauzi).
2-Download odin3 v1.85 from the attachments.
3-Download full DDLF2 from here (thanks to (thanks to sgatechwork).
4. Run Odin3 v1.85.
5. Check Re-Partition, Auto Reboot and F. Reset Time.
6. Click PIT button and select this file: latona_20110114.pit
7. Set it to download mode : Press Volume down + OK first, then hold Power button.
8. Connect USB cable and the program will detect the phone's Com number.
9. Click Start button to download the PIT file to phone.
10. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir].
11. Click PDA button and select this file: CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
12. Click PHONE button and select this file: MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5.
13. Click BOOTLOADER button and select this file: APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
14. Click CSC button and select this file: GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5.
15: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!].
16. Click Start button to flash these files to phone.
17. Do not touch anything till you see PASS on the program window.
18. Factory reset.
19. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
thanks to Misledz for the instructions (original thread here)(I only edited file names).
Now download any Jb 4.2.2 rom and carefully follow the OP instructions.
I suggest CM10.1 A8 by dhiru1602 (thanks to him), rom is verry stable and smooth.
if I helped you please hit the "thanks" button
Best regards
Click to expand...
Click to collapse
Thanks for your reply
but there's another method about updating by CWM RECOVERY
do you know how this method done ?

dr_amjad said:
Thanks for your reply
but there's another method about updating by CWM RECOVERY
do you know how this method done ?
Click to expand...
Click to collapse
yes there is another way if you have recovery installed. Just tell us what ROM you are on (your 4.1.2 ROM name) and try to find out if you have CWM recovery(volume up+home+power). Let us know this this then we will proceed.
@ASMI1 :He is on a 4.1.2 OS means he have a custom ROM and re-partioning is not mandatory because he is comming for a CM10 base.

mustafahussain said:
yes there is another way if you have recovery installed. Just tell us what ROM you are on (your 4.1.2 ROM name) and try to find out if you have CWM recovery(volume up+home+power). Let us know this this then we will proceed.
@ASMI1 :He is on a 4.1.2 OS means he have a custom ROM and re-partioning is not mandatory because he is comming for a CM10 base.
Click to expand...
Click to collapse
Thank you very much mr mustafa
i download the ROM from video on youtube and this is link of video
http://www.youtube.com/watch?v=VqypSD3JBJk
It's CM 10 Alpha 3
And in the video there's a download link of the Rom and this is the link which in the video
http://forum.xda-developers.com/showthread.php?t=1868074
by the way : when i click power key there is an option called : Reboot
when i click on Reboot tell me that i can Reboot my phone and recovery and download mode
Thanks for your reply

If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.

Drizzt_Kueh said:
If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.
Click to expand...
Click to collapse
Thank you very much for your reply
i will try and tell you
but i will not do any thing about : Data wipe/Factory reset & 5. Format dbdata. , right ??

Drizzt_Kueh said:
If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.
Click to expand...
Click to collapse
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??

dr_amjad said:
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??
Click to expand...
Click to collapse
Redownload rom.
Sent from my GT-I9003 using xda premium

dr_amjad said:
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??
Click to expand...
Click to collapse
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
dr_amjad said:
Thank you very much mr mustafa
i download the ROM from video on youtube and this is link of video
http://www.youtube.com/watch?v=VqypSD3JBJk
It's CM 10 Alpha 3
And in the video there's a download link of the Rom and this is the link which in the video
http://forum.xda-developers.com/showthread.php?t=1868074
by the way : when i click power key there is an option called : Reboot
when i click on Reboot tell me that i can Reboot my phone and recovery and download mode
Thanks for your reply
Click to expand...
Click to collapse
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
How to install
Warning only for lasted base CM10 Alpha4
if older base CM10 Alpha3 Full KPE please !!!
- Wip Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Flash first clean for mandatory starting
On CM10 Alpha 3 and all other basic Froyo, Gingerbread, ICS, JB
Click to expand...
Click to collapse
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english

ASMI1 said:
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english
Click to expand...
Click to collapse
Thank you very much mr ASMI 1 for your reply
but sorry i am still Noob in android development and updating
but according to your reply i must do :
- Wip Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Right ??
and please is there a video about my case (( updating samsung gt i 9003 from cm 10 alpha 3 to cm 10.1 alpha 8 )) ??
and sorry for annoyance you

ASMI1 said:
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english
Click to expand...
Click to collapse
(( if older base CM10 Alpha3 Full KPE please !!! ))
what the meaning of KPE ??
and i must do this ?? (( if older base CM10 Alpha3 Full KPE please !!! ))

dr_amjad said:
(( if older base CM10 Alpha3 Full KPE please !!! ))
what the meaning of KPE ??
and i must do this ?? (( if older base CM10 Alpha3 Full KPE please !!! ))
Click to expand...
Click to collapse
it means that if you have a base older to CM10 Alpha 3 then you should proceed with full KPE,,,
so IF YOUR CURRENT ROM IS ON CM10 Alpha 3 I would suggest just flash CM10 Alpha4 base ROM by Dhiru then,
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache

mustafahussain said:
it means that if you have a base older to CM10 Alpha 3 then you should proceed with full KPE,,,
so IF YOUR CURRENT ROM IS ON CM10 Alpha 3 I would suggest just flash CM10 Alpha4 base ROM by Dhiru then,
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Click to expand...
Click to collapse
Now i have Cm 10 alpha 3
you want me to do these steps :
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
and update my phone to Cm 10alpha 4 or cm 10.1 alpha 8 ?????????

dr_amjad said:
Now i have Cm 10 alpha 3
you want me to do these steps :
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
and update my phone to Cm 10alpha 4 or cm 10.1 alpha 8 ?????????
Click to expand...
Click to collapse
No, to upgrade from previous version of CM10 follow this:
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
Click to expand...
Click to collapse
and then
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
here where to download CM10 A4 and google apps(20121011 for CyanogenMod 10.0.x) (thanks to master dhiru1602).
BTW, in the past we used to install XXKPE stock rom (pit, bootloader, PDA, Phone, and CSC)(this is what meant by full KPE) and then install DDLF2 as PDA in download mod. But now full DDLF2 is out so we don't need XXKPE anymore to make clean install, you just install full DDLF2 (pit, bootloader, PDA, Phone, and CSC) the same way you install XXKPE and then proceed with installing your custom rom.
it is recommended to make clean install always before installing any custom rom (CM or rom based on CM) to prevent any issue (installing custom rom over another custom rom may cause some problems like lags and no signal issue...etc) just make clean install.
I advise you to upgrade only if, for example; you want to update to REMICS rom and you have previous version of REMICS rom or you want to update to carbon rom and you have previous version of carbon rom or you want to update to CM10.1 A8 rom and you have previous version of CM10.1 A7 rom...Do you get my point?

[ROM] A680 row MIUI V2

What's inside?
1. BASE ON MIUI 4.8.15 [JB 4.2.2]
2. MIUI Framework and other System Apps
3. MIUI Xiaomi Bootanimation
4. Debloated
5. Deodexed
6. Prerooted
7. Busybox Installed
8. init.D support
9. Feel FREE to EXPLORE...
====================================================
Download Link:
1. A680_MIUIV2.zip + Camera Patch.zip
====================================================
Flashing Instruction:
1. Go to TWRP/CWM
2. Do a Factory Reset
3. Flash A680_MIUIV2.zip
4. Wipe Dalvik and Reboot
5. Enjoy!
====================================================
Thanks to:
XDA
August D.
W500 Titan Family
Lenovo A680 Legit Users

lastkenji said:
What's inside?
1. BASE ON MIUI 4.8.15 [JB 4.2.2]
2. MIUI Framework and other System Apps
3. MIUI Xiaomi Bootanimation
4. Debloated
5. Deodexed
6. Prerooted
7. Busybox Installed
8. init.D support
9. Feel FREE to EXPLORE...
====================================================
Download Link:
1. A680_MIUIV2.zip + Camera Patch.zip
====================================================
Flashing Instruction:
1. Go to TWRP/CWM
2. Do a Factory Reset
3. Flash A680_MIUIV2.zip
4. Wipe Dalvik and Reboot
5. Enjoy!
====================================================
Thanks to:
XDA
August D.
W500 Titan Family
Lenovo A680 Legit Users
Click to expand...
Click to collapse
Can be used as a daily driver ?

Tre91 said:
Can be used as a daily driver ?
Click to expand...
Click to collapse
What do u mean bro?
Just try it, you can always make a backup of your stock rom..

Not booting
I installed MIUI in my phone (Lenovo a680) using ROM Manager. After booting my phone it didn't open again. It's been a day. Your response is much appreciated.

Hope this works for you....
Awesomeshocker said:
I installed MIUI in my phone (Lenovo a680) using ROM Manager. After booting my phone it didn't open again. It's been a day. Your response is much appreciated.
Click to expand...
Click to collapse
Try searching this post on blogspot and see how to do it.
lenovoa680transcrypto.blogspot.in

Could you create a lollipop rom for this device
Please
I BEG YOU

Unable to download the zip file.. the file appearing is a text file with same name but having 280b size only... please help..

[Updated to v5.10.29] [Xolo Q3000] [ROM] MiUi7_v5.10.15 with updates

As it was a challenge @rohitsinghpu, here is MY 7th PORTED ROM for Xolo Q3000, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) MIUI for the wonderful rom,
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MiUi7_v5.10.15 by Sachin.zip in sd card.
2) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
3) If you are on MiUi ROM, Wipe Cache, Dalvik Cache, Android Secure using Advanced Wipe, else perform Full Wipe.
4) Install MiUi7_v5.10.15 by Sachin.zip
5) Wipe Cache & Dalvik Cache & Reboot.
9) Phone will get upgraded to newer version, without losing any data.
10) If u face any problem or want to flash as clean install, then wipe data as well as system, alongwith Dalvik & Cache, before flashing rom.
WARNING:
I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Everything from MIUI working fine
2) Latest Google Keybord
3) WSM Tools Pre-Installed
4) SuperUser & BusyBox installed
5) MIUI Video as default media player
6) WiFi Direct working
7) Advanced power menu
8) Custom Boot Logo
9) Full changelog at: http://en.miui.com
Bugs:
Nearly Bugless ROM, few minor bugs are as follows:
1) Some of the Icons missing when using default theme(Change the theme).
2) Report, if you found any.
Note:
For Engineer Mode, dial *#*#3646633#*#*,
Download Links:
1) MiUi7_v5.10.15 Full ROM
All the Best, Guys......

Screenshots:
https://drive.google.com/open?id=0B9c3NsdJ2PscTlE2WVJid2lwX3c

Updates:
If you are using TWRP, Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
Also, if you are on twrp or any other recovery, you can update as follows:
reboot to recovery and flash ota.zip, wipe cache & dalvik, reboot.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA

Bug Fixes:

Great work bro, i ws missing wsm tool as it ws not compatible with roith bro port, it gave fc n random reboot, i tried many wsm version, then fount it ws instability in rom, ( sorry no offense roith bro, u did ur best and im thankfull to u)
Sachin bro, i always look forward to ur work?
Thanks fr making update easyy, downloading now, will review later

sachin.r.fulzele said:
Updates:
Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Click to expand...
Click to collapse
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?

Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,

iaditya91 said:
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Click to expand...
Click to collapse
U must be on twrp to update in the mentioned way. If u r on any other recovery, flash as a normal zip from recovery.

Jagadish-ravi said:
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
Click to expand...
Click to collapse
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.

sachin.r.fulzele said:
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
Click to expand...
Click to collapse
Awesome bro :thumbup::thumbup:

Does security and cleaner app works fine or still has reboot issues...

Inbuilt browser fc..

T285 Always or Once and All Apps MultiWindow Deodexed

WARNING !
Only be installed on deodexed firmware
1. T285_Always_or_Once_and_All_Apps_MultiWindow_Deodexed move to memory card
2. Open TWRP and flash T285_Always_or_Once_and_All_Apps_MultiWindow_Deodexed
3. Clean Dalvik and Cache
4. Restart the tablet

1. Installation : TWRP
2. Clean Dalvik and Cache
3. Restart the tablet

T285 Framework-Res Full Screen Apps Deodexed
1. Installation : TWRP

T285 SClean Deodexed
1. Automatic memory cleaning once at midnight, click on the notification to open the S Clean
2. Installation : TWRP
3. in the others.xml add red line
Code:
<CscFeature_RIL_Display4gPlusIconBandwidth>14</CscFeature_RIL_Display4gPlusIconBandwidth>
[COLOR="Red"]<CscFeature_Common_ConfigYuva>MemorySaver</CscFeature_Common_ConfigYuva>[/COLOR]
</FeatureSet>
</SamsungMobileFeature>

T285 Disable Signature Check Deodexed
Signature and integrity checking disabled
1. Installation : TWRP
2. Clean Dalvik and Cache
3. Restart the tablet

snifing
Please make a patch "T285_All_Apps_MultiWindow_Deodexed" for the new firmware T285XXS0ARJ2 / DEODEXED / 5.1.1 / SER

amarcha said:
snifing
Please make a patch "T285_All_Apps_MultiWindow_Deodexed" for the new firmware T285XXS0ARJ2 / DEODEXED / 5.1.1 / SER
Click to expand...
Click to collapse
Only T285XXS0ARJ2 SER/ T285XXS0ARJ2 XEF DEODEXED

snifing said:
WARNING !
Only be installed on deodexed firmware
1. T285_Always_or_Once_and_All_Apps_MultiWindow_Deodexed move to memory card
2. Open TWRP and flash T285_Always_or_Once_and_All_Apps_MultiWindow_Deodexed
3. Clean Dalvik and Cache
4. Restart the tablet
Click to expand...
Click to collapse
Hi. I have a T285 it says baseband version T285XXU0APL1 build # LMY47V.T285XXU0APCN i have deodexed tinker edition with root.
Is it possible to get a working All_Apps_MultiWindow for my device, please?

addxm said:
Hi. I have a T285 it says baseband version T285XXU0APL1 build # LMY47V.T285XXU0APCN i have deodexed tinker edition with root.
Is it possible to get a working All_Apps_MultiWindow for my device, please?
Click to expand...
Click to collapse
Decompile framework.jar
Open /smali/com/samsung/android/multiwindow/multiwindowapplicationinfos.smali with Notepad++
Code:
.method public isSupportApp(Ljava/lang/String;)Z
.line 143
:goto_11
return v0
:cond_12
const/4 v0, 0x0 [COLOR="Red"](change to 0x1)[/COLOR]
goto :goto_11
.end method
recompile

God i hate being a noob sometimes. smali, even that is new to me lol. ok, I will try my best, thank you!

addxm said:
God i hate being a noob sometimes. smali, even that is new to me lol. ok, I will try my best, thank you!
Click to expand...
Click to collapse
to flash the tablet https://forum.xda-developers.com/showpost.php?p=78644999&postcount=23 and flash https://forum.xda-developers.com/showpost.php?p=78472710&postcount=7

snifing said:
to flash the tablet https://forum.xda-developers.com/showpost.php?p=78644999&postcount=23 and flash https://forum.xda-developers.com/showpost.php?p=78472710&postcount=7
Click to expand...
Click to collapse
I thought i edited it ti say i got it done.
I got it done, thank you so much. i took a ARJ2 rom, flashed deodex, flashed your always & multi, then flashed dm verity to be sure, no cache or davlik wipe, rebooted . . . Perfect my xbox apps workside by side! THANK YOU SO MUCH!

Custom Rom For Huawei Y3ii LUA-U22 - Cyanogenmod 12.1 Unofficial

Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.

sujon3903 said:
Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.
Click to expand...
Click to collapse
Nice one, Man. If you need some help, I am here.

Does this work on LUA-U23?

DiegoxG said:
Does this work on LUA-U23?
Click to expand...
Click to collapse
This ROM, is developed by dev on android latino org. So you can ask the dev, Does this ROM can be used on U23.

Most of system apps have disappeared, clock bluetooth and others any reasom why ?

viper7144 said:
Most of system apps have disappeared, clock bluetooth and others any reasom why ?
Click to expand...
Click to collapse
Can you give screenshot and logcat?

will this remove huawei apps like huawei backup??

drkpntr said:
will this remove huawei apps like huawei backup??
Click to expand...
Click to collapse
Well, Installing custom ROM will remove official features like cloud storage, device account, system data, and user data.

but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.

drkpntr said:
but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.
Click to expand...
Click to collapse
I think huawei backup will not work properly, because Huawei system use huaweisdk and sync data to account. If you do that, the apps will force close, because Not all custom ROM have same process. Example, you are installing huawei backup, This mean the huawei backup cant work properly(force close) or else. You need a SDK to run huawei system apps. (Like MIUI from Xiaomi)
---------- Post added at 10:50 AM ---------- Previous post was at 10:45 AM ----------
If you want to try please backup your data and system. And Try to install huawei backup. if the apps force close. You can go back to your previous ROM

hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance

pojunkampar said:
hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance
Click to expand...
Click to collapse
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?

Reed_405 said:
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?
Click to expand...
Click to collapse
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:

pojunkampar said:
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:
Click to expand...
Click to collapse
Before trying to install this ROM, you must follow the order first.
1. Unlock Bootloader
2. Installing Philz/CWM/TWRP
3. Do wipe
4. Install the ROM, SuperSU, and other stuff
5. Reboot system
6. Wait 5-10 minutes
7. Enjoy

Why is my phone stuck on start after flashing the Rom .

Sandip Rai said:
Why is my phone stuck on start after flashing the Rom .
Click to expand...
Click to collapse
Have you follow the instruction?

The link is down.... Anyone please give new download link

aroien said:
The link is down.... Anyone please give new download link
Click to expand...
Click to collapse
Okay, since the owner didnt active to reply this message. So I would like to say that this is like disbanded. If I have time I ll give the link. Please wait.

Link not Working
Link not Working

Download Link.........
Cyanogenmod 12.1 Custom Rom please give me the download link..