Hello i have my ME301T probably bricked. Last time I used omni-4.4.4-20150521-me301t-FINAL ROM, which was working fine for some time. After longer time, when I didn't used my tablet, I'm not able to start it, neither to get into the fastboot or recovery.
What is working?
- APX mode
- charging
I tried also disconnect the battery - it didn't helped. I measured voltage and its fully charged (4,17 V). When I connect the charger, just red battery icon is showed on the display for few seconds and thats all. The same after long press of power button or in combination of power + vol. down.
So the only mode i can get is the APX. I was able to install APX driver but I'm not sure what next? I probably need some blob file, which I cannot find.
Any idea what I can try now? Or is my device really completly bricked without any chance?
Thanks
Haldy said:
Hello i have my ME301T probably bricked. Last time I used omni-4.4.4-20150521-me301t-FINAL ROM, which was working fine for some time. After longer time, when I didn't used my tablet, I'm not able to start it, neither to get into the fastboot or recovery.
What is working?
- APX mode
- charging
I tried also disconnect the battery - it didn't helped. I measured voltage and its fully charged (4,17 V). When I connect the charger, just red battery icon is showed on the display for few seconds and thats all. The same after long press of power button or in combination of power + vol. down.
So the only mode i can get is the APX. I was able to install APX driver but I'm not sure what next? I probably need some blob file, which I cannot find.
Any idea what I can try now? Or is my device really completly bricked without any chance?
Thanks
Click to expand...
Click to collapse
If you cannot boot into either fastboot or recovery, the tablet is bricked for good. I'm sorry!
Related
Ok. I bought this Galaxy Tab 2 7.0 from a friend for cheap because I thought I could fix it, but I'm running out of options. It's in a boot loop, but an abnormal boot loop. If it's unplugged, It will do the splash screen (Samsung) boot loop. If it's plugged in, either into the wall or into my computer via usb, it will do a battery (charging) boot loop. It's kinda weird. I used to have an Epic 4G and it happened damn near all the time, without the battery loop, but it would charge normally.
I haven't successfully gotten it to boot into Download mode.
If any of you have come across this issue, please feel free to help me out.
I also attached a picture of me attempting to put it in download mode. It reboots if I hit either VOL up or VOL down.
Thanks
extasy88 said:
Ok. I bought this Galaxy Tab 2 7.0 from a friend for cheap because I thought I could fix it, but I'm running out of options. It's in a boot loop, but an abnormal boot loop. If it's unplugged, It will do the splash screen (Samsung) boot loop. If it's plugged in, either into the wall or into my computer via usb, it will do a battery (charging) boot loop. It's kinda weird. I used to have an Epic 4G and it happened damn near all the time, without the battery loop, but it would charge normally.
I haven't successfully gotten it to boot into Download mode.
If any of you have come across this issue, please feel free to help me out.
I also attached a picture of me attempting to put it in download mode. It reboots if I hit either VOL up or VOL down.
Thanks
Click to expand...
Click to collapse
Can you get into recovery? Also, have you tried unplugging the charging cable and getting into download mode with the cable unplugged?
I'm not sure how to get into recovery. With it unplugged, all I have to do hold the VOL Down physical button and ti will take me to a "are you sure you want to put the device into download mode screen". I apologize. I'm not to familiar with this device.
Edit: After I get to the screen where it asks me if i want to go into download mode, it reboots within 5-10 seconds, no matter which button I press
extasy88 said:
I'm not sure how to get into recovery. With it unplugged, all I have to do hold the VOL Down physical button and ti will take me to a "are you sure you want to put the device into download mode screen". I apologize. I'm not to familiar with this device.
Click to expand...
Click to collapse
Hold power and Volume up (volume button closest to the power button) until the tab shuts off and reboots itself and then you can let go of both buttons. If it works, try doing a factory reset. Was this tablet rooted (or have a custom rom installed) in the past?
p3113owner said:
Hold power and Volkume up (volume button closest to the power button) until the tab shuts off and reboots itself and then you can let go of both buttons. If it works, try doing a factory reset. Was this tablet rooted (or have a custom rom installed) in the past?
Click to expand...
Click to collapse
As far as I know it's been on Stock. My GTab ignores me holding the Power and Volume up keys at the same time and keeps the boot loop going strong.
extasy88 said:
As far as I know it's been on Stock. My GTab ignores me holding the Power and Volume up keys at the same time and keeps the boot loop going strong.
Click to expand...
Click to collapse
Then I guess you can (and need) to send it in for warranty service (or replacement).
p3113owner said:
Then I guess you can (and need) to send it in for warranty service (or replacement).
Click to expand...
Click to collapse
No, his device is fine.
If your device bricked, but still showing Gtab2 logo on it, it's still fine. You need to flash to stock 4.03 rom via ODIN. (Not clockworkmod)
Warranty won't work if you have flashed custom ROM before.
Rotundjere said:
No, his device is fine.
If your device bricked, but still showing Gtab2 logo on it, it's still fine. You need to flash to stock 4.03 rom via ODIN. (Not clockworkmod)
Warranty won't work if you have flashed custom ROM before.
Click to expand...
Click to collapse
He needs to be able to get into Download Mode to use Odin. He stated that he can't. When he tried to continue into download mode by pressing volume up (vol. button closes to power button) the tablet reboots. It needs warranty service.
Experiments:
Power off the tab completely and charge completely and press power +volume up for 10 seconds then release, also try to power off and press power+ volume down for 10 seconds then release do you see any screens
If it says do you want to enter download mode or so press volume up and see if you could see (downloading) try also the same with volume down instead of up
Try to connect to computer do you see any messages indicating connections
Also try to connect to kies and try restore or recover firmware from options of kies
You said it reboots after 5 to 10 seconds so try to open odin and try to go to download mode and when you press volume up try as quickly as possible to connect tab to pc while odin is open
Sent from my GT-P5100 using xda app-developers app
p3113owner said:
He needs to be able to get into Download Mode to use Odin. He stated that he can't. When he tried to continue into download mode by pressing volume up (vol. button closes to power button) the tablet reboots. It needs warranty service.
Click to expand...
Click to collapse
There's other method by using OpenRecovery (OR), by putting OR on external SdCard,
but it seems the OR for Gtab2 is not developed yet -__-
So, been running CM10 for a long time on tab. Decided to go back to stock, and downloaded the JB stock rom. Flashed via ODIN. Everything seemed to go OK, except that after the flash the screen went black for ages, and didn't reboot. So I hard powered it off. Probably what did it, but it wasn't going anywhere for about 15 minutes, so figured it was the next step.
Now, I get the battery charging icon. The system goes through the Galaxy Tab 2 7.0 white logo, the swirling then glowing Samsung logo, and then loops through that forever.
It wouldn't be such a problem if I could back into ODIN and do another flash, but I can't get into download mode (normally I do it via adb but that isn't working since there is no USB connection at all). Tried all combinations, power/up, power/down etc. It just boot loops as above. I'm pretty sure I bricked it, but just wanted some confirmation.
Been doing this on and off for a long time, and it's the first time I've ever got stuck like this.
Thanks in advance.
Plug USB charger, your device will boot into charge mode. From charge mode you can boot into recovery by keep holding VOLUME UP button and than press POWER button. Clear data and cache in recovery, reboot.
ketut.kumajaya said:
Plug USB charger, your device will boot into charge mode. From charge mode you can boot into recovery by keep holding VOLUME UP button and than press POWER button. Clear data and cache in recovery, reboot.
Click to expand...
Click to collapse
Thanks, but I tried all combinations of Power/Volume UP and Power/Volume DOWN, it just goes through a normal boot cycle until it starts looping.
I guess it's possible I'm not using the right timing. I'm assuming that you hold Volume UP or DOWN and then press and hold Power until the screen goes black, and then release? I've done it like that many times, and also continued to hold everything down as the logo appears, and then system goes back to the battery charging icon as if it powers off again. I sound like such a noob when I type stuff like that!
I saw ODIN successfully write system.img, boot.img, and recovery.img, so I'm thinking any CWM recovery I had on there is toast.
sl0ttedpig said:
Thanks, but I tried all combinations of Power/Volume UP and Power/Volume DOWN, it just goes through a normal boot cycle until it starts looping.
I guess it's possible I'm not using the right timing. I'm assuming that you hold Volume UP or DOWN and then press and hold Power until the screen goes black, and then release? I've done it like that many times, and also continued to hold everything down as the logo appears, and then system goes back to the battery charging icon as if it powers off again. I sound like such a noob when I type stuff like that!
I saw ODIN successfully write system.img, boot.img, and recovery.img, so I'm thinking any CWM recovery I had on there is toast.
Click to expand...
Click to collapse
You must pull usb cable before start.
You can try to re-flash.
tuxafgmur said:
You must pull usb cable before start.
You can try to re-flash.
Click to expand...
Click to collapse
Well, don't I feel like the idiot!
How did I not think to disconnect the USB before trying this? tuxafgmur, your first "Thanks" has been registered, I've got it from here!
P.S. Welcome to the forum!
it sounds strange. never heard of such a strange boot problem. anyway it could be that while transferring boot.img it became damaged due to some error. i know you probably tryed but you may try and connect it to linux or mac os x in order to check if you could retrive more data about the tab. for example the mac could find if it is totally corrupted. normally when i plug my samsung devices it ask me to add the samsung-modem also if they are turned off. meybe if it happens the same to you you can try to adb fastboot it also if i doubt myself about it working, but give it a shot
i hope my bad english is not preventing you to understand what i'm saying!
give us new feedback!
Hi there,
The other day I was on TWRP and tried to flash an ASUS update file (probably didnt really know what I was doing). Anyway, the flash failed.
I then thought I ought to wipe the OS and restore to a backup. I got as far as wiping the OS when the battery died.
The next day I turned the device on and a progress bar appeared but didn't get anywhere. Frustrated, and aiming to reboot into TWRP, I turned off the tablet.
It now will not turn on.
So...Hard brick?
I will have to send this thing off to Asus otherwise.
Many thanks, reply much appreciated.
Chaza
Bump, any ideas?
chaza01 said:
Hi there,
The other day I was on TWRP and tried to flash an ASUS update file (probably didnt really know what I was doing). Anyway, the flash failed.
I then thought I ought to wipe the OS and restore to a backup. I got as far as wiping the OS when the battery died.
The next day I turned the device on and a progress bar appeared but didn't get anywhere. Frustrated, and aiming to reboot into TWRP, I turned off the tablet.
It now will not turn on.
So...Hard brick?
I will have to send this thing off to Asus otherwise.
Many thanks, reply much appreciated.
Chaza
Click to expand...
Click to collapse
Bump. Any quick reply would be welcome, I think I've been a noob so sorry if this thread makes you want to smash your head into the keyboard. I hadn't flashed anything for ages so was a tad rusty.
When I plug the transformer into the computer the led on the power button comes on, but the transformer will not power on.
Any ideas?
Many thanks
chaza01 said:
Bump. Any quick reply would be welcome, I think I've been a noob so sorry if this thread makes you want to smash your head into the keyboard. I hadn't flashed anything for ages so was a tad rusty.
When I plug the transformer into the computer the led on the power button comes on, but the transformer will not power on.
Any ideas?
Many thanks
Click to expand...
Click to collapse
You should still be able to get into recovery even with a bad wipe/flash, but your battery is drained. You need to plug it into the wall charger and let it charge and then boot directly into recovery.
Once you are there, you should be able to flash a ROM.
I'll give that a try
kiden said:
You should still be able to get into recovery even with a bad wipe/flash, but your battery is drained. You need to plug it into the wall charger and let it charge and then boot directly into recovery.
Once you are there, you should be able to flash a ROM.
Click to expand...
Click to collapse
Hi, many thanks for the reply, I will give that a try and get back to you tomorrow.
Many thanks
tried...
kiden said:
You should still be able to get into recovery even with a bad wipe/flash, but your battery is drained. You need to plug it into the wall charger and let it charge and then boot directly into recovery.
Once you are there, you should be able to flash a ROM.
Click to expand...
Click to collapse
Hi there,
I charged the tablet over night and the LED was showing as it was charging.
However, it still will not turn on.
When I connect the tablet to the computer the computer eventually recognizes that something is connected but deems it to be corrupted.
Any ideas?
Many thanks
Did you boot into recovery like I instructed?
Boot into Recovery Mode. You can do this by pressing and holding down the Volume Down and Power buttons until you are greeted with a message saying “Press Volume Up to enter RCK (5S)”. In less than 5 seconds, press the Volume Up button to enter Recovery Mode.
kiden said:
Did you boot into recovery like I instructed?
Boot into Recovery Mode. You can do this by pressing and holding down the Volume Down and Power buttons until you are greeted with a message saying “Press Volume Up to enter RCK (5S)”. In less than 5 seconds, press the Volume Up button to enter Recovery Mode.
Click to expand...
Click to collapse
Hi, it will not boot at all.
However, when I plugged it into the computer and did so, the computer made a beeping sound therefore recognizing a device was attached after I had pushed down the power button and volume down. On one occasion, it recognized an asus device was connected, and so I proceeded to install the correct driver and so installed 'asus bootloader' or whatever it was called. This didn't seem to change anything so I deleted the driver intending to install Asus ADB bit so I could perhaps force a boot from the computer. However, after uninstalling the driver the computer stopped recognizing the tablet beyond 'APX'.
Any ideas?
manyt thanks
bump
So I was doing something on my tablet, and it shut down.
I tried to reboot it and it was stuck.
I thought i had my rom on it (KatKiss) so i did a factory reset and tried to flash it but then i saw i deleted it when i flashed it at first.
So i thought ill just use EasyFlasher and get it back up and running.
Then I tried to get into APX mode and failed.
Volup + Power = Nothing
It just powers on the tablet and it stays there at the Asus logo.
I tried to hold it for 20+ seconds, nothing.
USB is plugged into the tablet, not the dock.
Tried to use sdcard to flash rom on it, cwm cant mount sdcards...
So if anyone could help it would be great
CWM bricked your tablet most likely - you should be running TWRP Recovery for KatKiss ROMs
You need to get the tablet into APX and get EasyFlasher working - APX should still work, nothing appears on the TF screen in APX mode, only way you know it is working is USB connect sound / device connected notification on PC
Keep in mind - APX is a black screen. The only way to know you are in APX is to see if a PC detects an APX device.
frederuco said:
Keep in mind - APX is a black screen. The only way to know you are in APX is to see if a PC detects an APX device.
Click to expand...
Click to collapse
*Detection* said:
CWM bricked your tablet most likely - you should be running TWRP Recovery for KatKiss ROMs
You need to get the tablet into APX and get EasyFlasher working - APX should still work, nothing appears on the TF screen in APX mode, only way you know it is working is USB connect sound / device connected notification on PC
Click to expand...
Click to collapse
I know APX is just a black screen, but even if i try to do it while usb is plugged in it just reboots to Asus logo.
You sure your volume up button is working ok ?
Try removing the plastic bezel around the edge of the tablet and press the actual micro-buttons under the silver ones you normally press
*Detection* said:
You sure your volume up button is working ok ?
Try removing the plastic bezel around the edge of the tablet and press the actual micro-buttons under the silver ones you normally press
Click to expand...
Click to collapse
I am dead sure its working, when im in cwm i can navigate with both of volume buttons.
welja99 said:
I am dead sure its working, when im in cwm i can navigate with both of volume buttons.
Click to expand...
Click to collapse
Make sure you have the correct drivers for APX mode. I got mine from x3maniac's Tubuntu - One Click Installer for Windows
From this thread
http://forum.xda-developers.com/showthread.php?t=1995157
In the package, there are the drivers and also a flashing program(NVFlash). You can also use this. Even have a APX mode detected status at the top so you don't have to do the guessing work that it's in APX or not.
P/s: Just to confirm, to go into APX mode 1) Turn on your tablet(not necessary to wait till it boots) 2) Hold the power and volume up button until it shuts down and keep holding the buttons until you see it is detected as APX mode on your computer.
APX mode is from a powered off state:
Hold Volume Up & Power until PC recognises it
Done
unplug and boot apx
I usually boot apx and then plug in the usb shortly after. Also note that occasionally a grounding issue occurs (happens with my bull**** Dell Venue). Run a piece of metal across the usb pins while the tablet is off and try again after ensuring the device is charged.
Hello Guys,
My OnePlus One screen broke, it was in my drawer for more than 15 days without charge, i connected charger for 1 hour it just went from 1% to 5% but i didnt thought much about it as my priority was to change screen, i bought touch+lcd with frame and replaced it myself, but it wasnt powering up then i tried putting the backpanel on, it then booted up to the home screen, but the battery indicator wasnt moving up i powered off the phone after that it never turned on, i researched a bit and found out the after long period of time if you dont charge your phone might have problem charging and there was one suggestion which i followed and that was charge OPO using usb cable attached to PC, i left it for somewhat 7hours and it powered on i thought it might be the problem of ROM i flashed official H2OS (regret selecting this rom) using TWRP, it was a catastrophe my phone wont Enter Bootloader or Recovery, and wont even boot to system, it seemed i hardbricked my device, i used Oneplus one recovery tool 64GB to bring my device to life but after that no matter what i do my device wont enter to bootloader as the volume up button stopped working too : tried advance reboot, powerup+volumeup, opo toolkit.
Help me, i want to root my device and unlock bootloader once again.
Pra7ul said:
Hello Guys,
My OnePlus One screen broke, it was in my drawer for more than 15 days without charge, i connected charger for 1 hour it just went from 1% to 5% but i didnt thought much about it as my priority was to change screen, i bought touch+lcd with frame and replaced it myself, but it wasnt powering up then i tried putting the backpanel on, it then booted up to the home screen, but the battery indicator wasnt moving up i powered off the phone after that it never turned on, i researched a bit and found out the after long period of time if you dont charge your phone might have problem charging and there was one suggestion which i followed and that was charge OPO using usb cable attached to PC, i left it for somewhat 7hours and it powered on i thought it might be the problem of ROM i flashed official H2OS (regret selecting this rom) using TWRP, it was a catastrophe my phone wont Enter Bootloader or Recovery, and wont even boot to system, it seemed i hardbricked my device, i used Oneplus one recovery tool 64GB to bring my device to life but after that no matter what i do my device wont enter to bootloader as the volume up button stopped working too : tried advance reboot, powerup+volumeup, opo toolkit.
Help me, i want to root my device and unlock bootloader once again.
Click to expand...
Click to collapse
adb reboot bootloader
waterdaan said:
adb reboot bootloader
Click to expand...
Click to collapse
That Just Reboots it to system, i have turned adb on and clicked on trust this connection i have checked adb devices, and it shows attached devices too,
it just wont reboot to bootloader, but i can enter recovery. Help Please.
Pra7ul said:
That Just Reboots it to system, i have turned adb on and clicked on trust this connection i have checked adb devices, and it shows attached devices too,
it just wont reboot to bootloader, but i can enter recovery. Help Please.
Click to expand...
Click to collapse
Is your volume up button actually broken or does it still work and can you boot into something? If it still works (hold on, this idea might be a little crazy xD) you could try completely hard bricking (no joke! you cannot get into Qualcomm download mode with a booting device) and restoring it with the msm8974downloadtool from the oneplus one unbricking guide which should theoretically fix everything that is wrong.
noahvt said:
Is your volume up button actually broken or does it still work and can you boot into something? If it still works (hold on, this idea might be a little crazy xD) you could try completely hard bricking (no joke! you cannot get into Qualcomm download mode with a booting device) and restoring it with the msm8974downloadtool from the oneplus one unbricking guide which should theoretically fix everything that is wrong.
Click to expand...
Click to collapse
Even If my volume button dosent work then why wont it enter bootloader via advance reboot it just restarts to system after selecting reboot to bootloader,so i should hard brick my device once again, P.S. i have done that twice before though.