I am stuck on with eRecovery and fastboot&recovery mode. I have tried flashing cache,recovery, recovery2, system and boot .img files using adb but I get a FAILED (remote: command not allowed). My bootloader is unlocked as I have checked using adb. On fastboot it says PHONE Unlocked and FRP Lock. Any ideas?
as long as your FRP is locked you can not flash anything.
Only way is to use dload method to restore your phone. let me know the model number and build number you were on and I can help with download links.
shashank1320 said:
as long as your FRP is locked you can not flash anything.
Only way is to use dload method to restore your phone. let me know the model number and build number you were on and I can help with download links.
Click to expand...
Click to collapse
I can't install using the dload method as I have only eRecovery and fastboot&recovery mode on the device. The last firmware I was on was the BLN-L21C432B365 firmware.
lintern said:
I can't install using the dload method as I have only eRecovery and fastboot&recovery mode on the device. The last firmware I was on was the BLN-L21C432B365 firmware.
Click to expand...
Click to collapse
Recovery has nothing to do. I was stuck with no mode other than erecovery. I used dload amd retain my device.
shashank1320 said:
Recovery has nothing to do. I was stuck with no mode other than erecovery. I used dload amd retain my device.
Click to expand...
Click to collapse
How can I use dload method then? Pressing the volume up and the power key enters into eRecovery, pressing volume down and the power key enters fastboot&recovery mode. If I try to press the volume up, down and the power key a tthe same time it enters eRecovery.
lintern said:
How can I use dload method then? Pressing the volume up and the power key enters into eRecovery, pressing volume down and the power key enters fastboot&recovery mode. If I try to press the volume up, down and the power key a tthe same time it enters eRecovery.
Click to expand...
Click to collapse
It should be all three keys together with volume up+volume down pressed first and then power key (together)
Keep it that way and once you feel vibration and then honor logo and flashing will start.
Yours is booting to erecovery because of volume up for more than 3 seconds.
Keep trying your luck brother
shashank1320 said:
It should be all three keys together with volume up+volume down pressed first and then power key (together)
Keep it that way and once you feel vibration and then honor logo and flashing will start.
Yours is booting to erecovery because of volume up for more than 3 seconds.
Keep trying your luck brother
Click to expand...
Click to collapse
It's going to eRecovery with all three buttons pressed (which they all are) because no recovery at all is installed. If twrp was installed and I pressed all three buttons and then let go on the honor logo it would boot to that which is the same method for stock recovery. Without that I can't install using the dload method.
lintern said:
It's going to eRecovery with all three buttons pressed (which they all are) because no recovery at all is installed. If twrp was installed and I pressed all three buttons and then let go on the honor logo it would boot to that which is the same method for stock recovery. Without that I can't install using the dload method.
Click to expand...
Click to collapse
Are you able to boot to twrp, can try custom ROM
shashank1320 said:
Are you able to boot to twrp, can try custom ROM
Click to expand...
Click to collapse
Nope, as I've said I just have eRecovery and fastboot&recovery mode available right now. I will try using DC Phoenix to see if that helps.
lintern said:
Nope, as I've said I just have eRecovery and fastboot&recovery mode available right now. I will try using DC Phoenix to see if that helps.
Click to expand...
Click to collapse
Are you able to flash anything from fastboot?
shashank1320 said:
Are you able to flash anything from fastboot?
Click to expand...
Click to collapse
I get a remote command failed message when trying to flash anything in fastboot.
shashank1320 said:
as long as your FRP is locked you can not flash anything.
Only way is to use dload method to restore your phone. let me know the model number and build number you were on and I can help with download links.
Click to expand...
Click to collapse
I managed to get stock recovery working from the B365 firmware which was last on the device but when I try to flash the firmware using the dload method it fails at 5%.
lintern said:
I managed to get stock recovery working from the B365 firmware which was last on the device but when I try to flash the firmware using the dload method it fails at 5%.
Click to expand...
Click to collapse
Which version are you flashing?
shashank1320 said:
Which version are you flashing?
Click to expand...
Click to collapse
The BLN-L21C432B365 firmware.
shashank1320 said:
Which version are you flashing?
Click to expand...
Click to collapse
I managed to use DC Phoenix software to restore my phone to the BLN-L21C432B360 firmware and also install the hw_eu update alongside it to get rid off test keys. As soon as I connected to the internet on the device I had a prompt come up to install the BLN-L21C432B365 firmware.
lintern said:
I managed to use DC Phoenix software to restore my phone to the BLN-L21C432B360 firmware and also install the hw_eu update alongside it to get rid off test keys. As soon as I connected to the internet on the device I had a prompt come up to install the BLN-L21C432B365 firmware.
Click to expand...
Click to collapse
Glad to know mate. How much it costed?
What exactly you done? Just to check what we were not doing
shashank1320 said:
Glad to know mate. How much it costed?
What exactly you done? Just to check what we were not doing
Click to expand...
Click to collapse
It cost me 15 euros. I used DC Phoenix software to flash the BLN-L21C432B360 update.app with my phone in fastboot mode and connected to my computer. Once it finishes this you boot to updgrade mode whilst still connected to the computer which you do by pressing the volume up, down and power buttons. Once in this mode change the options in the DC Phoenix software to upgrade mode and select the update.app again and click the update button on the DC Phoenix software. It wouldn't work for any of the firmwares except the BLN-L21C432B360 FullOTA-MF-PV firmware. All the others didn't have FullOTA-MF-PV next to them just FullOTA-MF. I'm now on the BLN-L21C432B367 firmware which came up ota once I updated to BLN-L21C432B365 from the BLN-L21C432B360 firmware.
lintern said:
It cost me 15 euros. I used DC Phoenix software to flash the BLN-L21C432B360 update.app with my phone in fastboot mode and connected to my computer. Once it finishes this you boot to updgrade mode whilst still connected to the computer which you do by pressing the volume up, down and power buttons. Once in this mode change the options in the DC Phoenix software to upgrade mode and select the update.app again and click the update button on the DC Phoenix software. It wouldn't work for any of the firmwares except the BLN-L21C432B360 FullOTA-MF-PV firmware. All the others didn't have FullOTA-MF-PV next to them just FullOTA-MF. I'm now on the BLN-L21C432B367 firmware which came up ota once I updated to BLN-L21C432B365 from the BLN-L21C432B360 firmware.
Click to expand...
Click to collapse
Glad to hear that your problem solved but sad to know the cost part. Not sure what went wrong when tried helping the same way
shashank1320 said:
Glad to hear that your problem solved but sad to know the cost part. Not sure what went wrong when tried helping the same way
Click to expand...
Click to collapse
It's not your fault mate. I needed the stock recovery to be installed and I could not flash it with the FRP Lock on. DC Phoenix software allowed me to flash the update.app using fastboot & recovery mode as it bypasses security which cost me 15 euros.
Related
Hey ladies and gentlemen,
I am having a serious problem. I tried to root my Honor 6 (H60-L04). After installing Super User via TWRP my smartphone started a bootloop. After I waited a few hours it turned off and I tried to reload it for booting into the download mode (to flash a new firmware via Honor MultiTool). But it still showed me that there is an empty battery and didn't start. How can I unbrick it?
Thanks
Haeggis said:
Hey ladies and gentlemen,
I am having a serious problem. I tried to root my Honor 6 (H60-L04). After installing Super User via TWRP my smartphone started a bootloop. After I waited a few hours it turned off and I tried to reload it for booting into the download mode (to flash a new firmware via Honor MultiTool). But it still showed me that there is an empty battery and didn't start. How can I unbrick it?
Thanks
Click to expand...
Click to collapse
do u have solution for this??
To install a full stock firmware follow these steps, if the phone is not booting in bootloader mode try doing this: After a loop gets complete, quickly press Vol UP button and connect the phone to PC, you'll be in bootloader mode.
Download your latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
I had a similar problem with mine when updating to EMUI 4. What I did was:
- Hold Volume Down while rebooting and Connect USB. It should boot into Bootload mode.
- If you get the Error Screen, reboot the Phone.
- If it doesn't work, hold all three buttons. It should reset the phone.
This actually reset my phone and made it work again. Don't ask me why or how.
You should Unbrick with Honor Multitool. You get to still have your data intact when you do only the first step without the 3 button install. If you don't have a TWRP backup that is. Don't ever install SU or root from TWRP. Use KingRoot or Multitool
CplBasti said:
I had a similar problem with mine when updating to EMUI 4. What I did was:
- Hold Volume Down while rebooting and Connect USB. It should boot into Bootload mode.
- If you get the Error Screen, reboot the Phone.
- If it doesn't work, hold all three buttons. It should reset the phone.
This actually reset my phone and made it work again. Don't ask me why or how.
Click to expand...
Click to collapse
If the device is rooted then you'll get install failed when doing three button reset, hence the manual flashing is needed.
The three button reset also fails, if in anyway your system is modified.
DigiGoon said:
If the device is rooted then you'll get install failed when doing three button reset, hence the manual flashing is needed.
The three button reset also fails, if in anyway your system is modified.
Click to expand...
Click to collapse
Well, my system was modified, and after doing that Three-Button reset twice, it actually worked.
Don't ask me why, it just worked. And I'm actually glad it did haha.
CplBasti said:
Well, my system was modified, and after doing that Three-Button reset twice, it actually worked.
Don't ask me why, it just worked. And I'm actually glad it did haha.
Click to expand...
Click to collapse
Good for you then, maybe the UPDATE.APP adjusted itself.
DigiGoon said:
Good for you then, maybe the UPDATE.APP adjusted itself.
Click to expand...
Click to collapse
Haha, yeah, probably
I'm just happy that my phone is working now.
Yes, sometimes Android does things which we can't understand(or maybe we don't have enough knowledge), so its easy to just accept the outcome and enjoy..!!
Hello guys !
First of all, thank you to you all for all the help i've already found on the forum.
I've got an Honor 8, and I tried to flash it for solving battery drain.
After several attempts and almost get there, now the phone is totally bricked.
Here some useful information:
- Bootloader in unlocked
- When in fastboot mode, Fastboot recognize my device but not ADB. I tried installing several drivers but nothing
- Flashing different recovery from fastboot don't work. I mean, it works but the device don't enter in recovery mode ( stuck in Your device is booting now....)
When try to install an update.app from stock recovery, i get error, both unable to find the package and unable to verify the package content.
When first I wasable to get in TWRP, when trying flashing a rom, it alwayg gaves me error like UNABLE TO MOUNT /DATA or /CACHE.
I think I really messed up with partitions and now everything seems doesn't be able to get into the phone.
I started yesterday, still here....
I guess dozens of users encountered same problems, I've tried everythinh from the forum but nothing worked....
Someone has any idea ? Cause my girlfriend will soon kill me.....
Yeah, even with volume up and power. It stuck on boot.
I've tried the most common fix, tried several twrp and rom. Same for update from SD, tried everything, différents rom, rollback....
Nothing...
Rommco05 said:
What happens when you hold +/-/off,on together?
Click to expand...
Click to collapse
It starts in automatic update mode. When trying to connect to WI-FI and download, an error message appear, seems unable to found the update.
When trying to update from SD, several update.app has failed.
When trying to clean all data from Emui recovery mode, the first 2 attempt stops at 7%, the third stops at 99%. Every time i have tried...
I really think is a partition issues, something that don' let the firmware recognize the phone and get the update
Rommco05 said:
Whitch model you have and witch fw you had installed before problem?
Click to expand...
Click to collapse
I have a FRD-L09 and i had the last update B380
Yeah the rollback package revives any brick. I've been through it all once and this will fix any mess so find a way to flash it.
By the way to access recovery you need to have your phone not plugged to USB (that's the bit i was missing for a long time) With your phone completely off (you can turn it off from the eRecovery (vol+ vol- power) ) hold vol+ & power and when the phone vibrates let go off the power and just hold vol+
http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92131 and then flash B131 fw
http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92101
if you can't get into recovery use huawei firmware extractor and get a recovery.img from one of those firmware packages and flash it via fastboot mode.
sysak said:
Yeah the rollback package revives any brick. I've been through it all once and this will fix any mess so find a way to flash it.
By the way to access recovery you need to have your phone not plugged to USB (that's the bit i was missing for a long time) With your phone completely off (you can turn it off from the eRecovery (vol+ vol- power) ) hold vol+ & power and when the phone vibrates let go off the power and just hold vol+
http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92131 and then flash B131 fw
http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92101
if you can't get into recovery use huawei firmware extractor and get a recovery.img from one of those firmware packages and flash it via fastboot mode.
Click to expand...
Click to collapse
Ok, tries, an error message says "impossible to find the package".
Maybe there are some issues with the SD card formatting, so he's not able to get into the dload folder ?
Rommco05 said:
Can you try another sd card or format on pc?
Click to expand...
Click to collapse
In FAT32 ?
Tonioparis said:
Ok, tries, an error message says "impossible to find the package".
Maybe there are some issues with the SD card formatting, so he's not able to get into the dload folder ?
Click to expand...
Click to collapse
did you extract the rollback package?
and yes important to put extracted update.app into dload folder on SD and unplug your device while doing this
if not flash stock recovery, system and so one with huawei extractor from your current running rom
you can enter fastboot mode, turn off your device and hold volume down + power, try this with plugged or unplugged device, but must be turned off..if this helps enter fastbootmode, then flash the extracted images
Dimontiman said:
did you extract the rollback package?
and yes important to put extracted update.app into dload folder on SD and unplug your device while doing this
if not flash stock recovery, system and so one with huawei extractor from your current running rom
you can enter fastboot mode, turn off your device and hold volume down + power, try this with plugged or unplugged device, but must be turned off..if this helps enter fastbootmode, then flash the extracted images
Click to expand...
Click to collapse
Hey...Seems to be working....:cyclops::cyclops::cyclops:
Rommco05 said:
after format card?
Click to expand...
Click to collapse
YYYESSSSSSSSS !!!!
All this time I tried everything and it was the SD card....formatted in NTFS....
MANY THANKS GUYS !!
Now, meanwhile I needed a phone and I got a P10....
Anyone need an Honor 8???
eheh
Yeah, of coure ! Was a joke, means I should probably learn patience
Just another question : when power on now there's no "You can't trust your device".
May I assule that now the bootloader is blocked ?
Thanks again to you all guys !
Rommco05 said:
Yes now is bootloader relocked, you can try again experiments but be carefull and read before anything you do and dont know what you do
Click to expand...
Click to collapse
I guess i'll still like that eheh.
My only concern is about battery drain. I'll try to stay with marshmallow and see if is better than Nougat !
Rommco05 said:
Noo Nougat is match better! https://forum.xda-developers.com/showpost.php?p=72177403&postcount=133
Click to expand...
Click to collapse
uhm but I cannot get the B381 OTA, isn it ?
Rommco05 said:
Dont wait for OTA, use Firmware Finder or flash via twrp...
Click to expand...
Click to collapse
you mean maees around with the bootloader again eh ? ahah
Ok i downloaded the full OTA, but how to install it directly ?
Tonioparis said:
Ok i downloaded the full OTA, but how to install it directly ?
Click to expand...
Click to collapse
Update process:
1. Unzip [extract] the update.zip to the SD card into the dload folder (if folder is not present, create it yourself)
2. In the phone app, enter the combination *#*#2846579#*#*, then select "Software Upgrade" and
The update from SD start
3. Delete the data in the dload folder
4. Repeat point 1-3 with the update_data_full_hw_eu.zip
5. WipeCache (personal recommendation)
Alright. I have an honor 6x which I attempted to root. I flashed the twrp wrong, and I then was stuck in a bootloop of sorts where it would bring me back to the "Your phone has been unlocked and can't be trusted." screen from unlocking bootloader. I let the battery die, and on that screen once it got some charge, it gave me the option to go to eRecovery. I did that and was able to shut the phone down completely. I then put it in fastboot mode. Through that, I re-locked the bootloader. Done!... not quite. Then, I turned the phone on. Now it only boots into eRecovery mode. I have no idea what the problem is or if it can be fixed. Any help would be received gratefully. Thank you!
which version of device(BL..) and do you bricked on EMUI 4.1 or 5 ?
In worst of cases, are you able to wipe data from eRecovery menu?
Why did you relock bootloader? Not a good idea.
Sent from my Honor 8 using XDA Labs
venugopalu007 said:
which version of device(BL..) and do you bricked on EMUI 4.1 or 5 ?
Click to expand...
Click to collapse
BLN L24
EMUI 5 Android 7
RedSkull23 said:
In worst of cases, are you able to wipe data from eRecovery menu?
Click to expand...
Click to collapse
On eRecovery screen there isn't that option. Updating thru it doesn't work so my only eRecovery options are reboot or shut down.
Fatefulostrich said:
BLN L24
EMUI 5 Android 7
Click to expand...
Click to collapse
step 1: download this -->http://download-c1.huawei.com/download/downloadCenter?downloadId=94205&version=377711&siteCode=us
step 2: extract the zip which you downloaded in that copy the UPDATE.APP to sdcard/dload floder
step3: now power off the phone and hold all three buttons and after vibrate release the power button , it updates successfully , now.
step 4: download this -- >http://download-c1.huawei.com/download/downloadCenter?downloadId=94230&version=377728&siteCode=us
step 5: extract the zip which you downloaded in that copy the UPDATE.APP to sdcard/dload floder (delete the old one )
step 6: now power off the phone and hold all three buttons and after vibrate release the power button, it updates successfully now
and now just reset once . your phone will works 100% .
I attached a pdf to how to rollback.
venugopalu007 said:
step 1: download this -->http://download-c1.huawei.com/download/downloadCenter?downloadId=94205&version=377711&siteCode=us
step 2: extract the zip which you downloaded in that copy the UPDATE.APP to sdcard/dload floder
step3: now power off the phone and hold all three buttons and after vibrate release the power button , it updates successfully , now.
step 4: download this -- >http://download-c1.huawei.com/download/downloadCenter?downloadId=94230&version=377728&siteCode=us
step 5: extract the zip which you downloaded in that copy the UPDATE.APP to sdcard/dload floder (delete the old one )
step 6: now power off the phone and hold all three buttons and after vibrate release the power button, it updates successfully now
and now just reset once . your phone will works 100% .
I attached a pdf to how to rollback.
Click to expand...
Click to collapse
I got to step 3, and it says Software install failed! The update package does not exhist. Please download the package again. Should I try to return to best buy? I have 14 days since monday (today is thursday) and the bootloader is locked again.
Fatefulostrich said:
I got to step 3, and it says Software install failed! The update package does not exhist. Please download the package again. Should I try to return to best buy? I have 14 days since monday (today is thursday) and the bootloader is locked again.
Click to expand...
Click to collapse
Did you copied the update.app to dload folder?
venugopalu007 said:
Did you copied the update.app to dload folder?
Click to expand...
Click to collapse
Yes, I did. I do have to mention that before I copied the update.app, I had to make a dload folder.
Fatefulostrich said:
Yes, I did. I do have to mention that before I copied the update.app, I had to make a dload folder.
Click to expand...
Click to collapse
Download the files from the link and flash them through dload. No need to unzip and install stock recovery.
Sent from my Honor 8 using XDA Labs
Fatefulostrich said:
Yes, I did. I do have to mention that before I copied the update.app, I had to make a dload folder.
Click to expand...
Click to collapse
Yes u had to make new folder dload , and copy the file to card and follow
Fatefulostrich said:
Alright. I have an honor 6x which I attempted to root. I flashed the twrp wrong, and I then was stuck in a bootloop of sorts where it would bring me back to the "Your phone has been unlocked and can't be trusted." screen from unlocking bootloader. I let the battery die, and on that screen once it got some charge, it gave me the option to go to eRecovery. I did that and was able to shut the phone down completely. I then put it in fastboot mode. Through that, I re-locked the bootloader. Done!... not quite. Then, I turned the phone on. Now it only boots into eRecovery mode. I have no idea what the problem is or if it can be fixed. Any help would be received gratefully. Thank you!
Click to expand...
Click to collapse
first of all it is a surprise that ur phone gets charged after u let it die(bcoz mine doesnt wake up till now after the same instance).
and for ur problem if it boots in erecovery mode then there will be a option like downloading os from internet and if u select that it will automatically get installed in android mm
SRI HARI RAJAN said:
first of all it is a surprise that ur phone gets charged after u let it die(bcoz mine doesnt wake up till now after the same instance).
and for ur problem if it boots in erecovery mode then there will be a option like downloading os from internet and if u select that it will automatically get installed in android mm
Click to expand...
Click to collapse
No , it will not work , i dont know the reason y the Huawei is included the erecovery , buggy erecovery every time .
May he give a try.
Rommco05 said:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v82815/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...24_hw_usa/update_data_full_BLN-L24_hw_usa.zip
Try this firmware is BLN-L24C567B360
But I don't remember if must ziped or unzipped, so try both
edit: if this doesn't work probably u need first flash stock recovery...
Click to expand...
Click to collapse
The first one seems to be working. Thank you so much, and everyone who helped me during this. I was really freaked out, but its working now. Thanks everyone.
Fatefulostrich said:
The first one seems to be working. Thank you so much, and everyone who helped me during this. I was really freaked out, but its working now. Thanks everyone.
Click to expand...
Click to collapse
Sounds fantastic
You are welcome .
Good rommoco05
Rommco05 said:
Great! I happy with you please I have question, you unzip files or not?
Click to expand...
Click to collapse
I actually copied both to that path on the sd card. I am not sure which one it used though.
Rommco05 said:
You copied both together same time to dload? Was unziped or not?
Click to expand...
Click to collapse
But his device is successfully working
I found that my phone got into that same state (always booting to eRecovery) if I flashed a replacement recovery2 and re-locked the bootloader; apparently Huawei doesn't like that. I just had to boot to fastboot and unlock the bootloader again, then it was able to start up to System.
It sounds like OP was able to fix it by restoring the original recovery2.
My bln-l21c432 was on build 130. I downloaded b360 over updater app and rebooted the phone to install it. Now its stuck on the huawei logo and I cant Access anthing. When I press power button it vibrates 2 times and Shows the huawei logo. I thought that it would boot if i lock the bootloader but it didnt work. so bootloader is locked and I cant boot into fastboot or recovery.
h4rd1337 said:
My bln-l21c432 was on build 130. I downloaded b360 over updater app and rebooted the phone to install it. Now its stuck on the huawei logo and I cant Access anthing. When I press power button it vibrates 2 times and Shows the huawei logo. I thought that it would boot if i lock the bootloader but it didnt work. so bootloader is locked and I cant boot into fastboot or recovery.
Click to expand...
Click to collapse
You should flash whole firmware..via dload method.
You can download firmware file from honor official site according to your model and build number.
hassanjavaid8181 said:
You should flash whole firmware..via dload method.
You can download firmware file from honor official site according to your model and build number.
Click to expand...
Click to collapse
i cant get into dload thats the problem
h4rd1337 said:
i cant get into dload thats the problem
Click to expand...
Click to collapse
What error it gives or it just didn't respond??
Going in fastboot??by pressing vol- and power button??
hassanjavaid8181 said:
What error it gives or it just didn't respond??
Going in fastboot??by pressing vol- and power button??
Click to expand...
Click to collapse
it doesnt respond
fastboot doesnt work either
Good all day. I have a similar problem. The BLN L21 phone has no boot even in the fastboot. There is no guarantee. Perhaps someone has a solution to this problem?
Hey guys, my Honor is in brick state. I pushed a rollback package while I was in marshmallow (but with wrong ROM, so I was trying to rollback again and retry the procedure) and the phone got stuck in Honor blue screen at loop.
It won't let me power off, it justs turns on again. All button combinations won't work apparently. I can't get to recovery or e-recovery.
I tried depleting the battery. But as soon as I connect to the charger, it powers on. If I try the button combination before putting charge, it also doesn't work.
After the first successful rollback to MM, I think the bootloader got locked.
adb and fastbook can't seem to list the device.
I can get to fastboot and rescue mode, but I don't know the procedure from there.
So, is this a unsolvable brick? Or is there anything else that can be done to save this phone?
Thanks a lot for your feedback.
use dc unlocker to flash unlock bootloader and after dc flasher
valp88 said:
Hey guys, my Honor is in brick state. I pushed a rollback package while I was in marshmallow (but with wrong ROM, so I was trying to rollback again and retry the procedure) and the phone got stuck in Honor blue screen at loop.
It won't let me power off, it justs turns on again. All button combinations won't work apparently. I can't get to recovery or e-recovery.
I tried depleting the battery. But as soon as I connect to the charger, it powers on. If I try the button combination before putting charge, it also doesn't work.
After the first successful rollback to MM, I think the bootloader got locked.
adb and fastbook can't seem to list the device.
I can get to fastboot and rescue mode, but I don't know the procedure from there.
So, is this a unsolvable brick? Or is there anything else that can be done to save this phone?
Thanks a lot for your feedback.
Click to expand...
Click to collapse
It's easy. I had a similar problem too. Just when your phone attempts to boot, hold the Volume Down button and immediately connect it to the PC (within 1-2 second). It should go into fastboot mode. Now, open Huawei Multi Tool and unlock your bootloader then use the tool to unbrick your phone, start with flashing stock recovery and then the correct firmware.
SirDarknight said:
It's easy. I had a similar problem too. Just when your phone attempts to boot, hold the Volume Down button and immediately connect it to the PC (within 1-2 second). It should go into fastboot mode. Now, open Huawei Multi Tool and unlock your bootloader then use the tool to unbrick your phone, start with flashing stock recovery and then the correct firmware.
Click to expand...
Click to collapse
Thanks for repying. I unlocked my bootloader through fastboot and I'm trying to get multi-tool now!
i'm getting 404 from xda for the download link though.
SirDarknight said:
It's easy. I had a similar problem too. Just when your phone attempts to boot, hold the Volume Down button and immediately connect it to the PC (within 1-2 second). It should go into fastboot mode. Now, open Huawei Multi Tool and unlock your bootloader then use the tool to unbrick your phone, start with flashing stock recovery and then the correct firmware.
Click to expand...
Click to collapse
I flashed extracted and flashed images for B131 and B360, without luck. Stuck on the unlocked warning now: "Your device is booting now".
I can't seem to get to erecovery. Please let me know if you have any ideas.
valp88 said:
I flashed extracted and flashed images for B131 and B360, without luck. Stuck on the unlocked warning now: "Your device is booting now".
I can't seem to get to erecovery. Please let me know if you have any ideas.
Click to expand...
Click to collapse
If you're stuck on "Your device is booting now". This probably means your recovery is screwed. Don't worry, flash stock recovery and erecovery using Multi-Tool.
Then try the dload method. If the problem persists, then flash the correct TWRP then use HuRUpdater to flash the ROM you want. This will definitely fix the issue.
SirDarknight said:
If you're stuck on "Your device is booting now". This probably means your recovery is screwed. Don't worry, flash stock recovery and erecovery using Multi-Tool.
Then try the dload method. If the problem persists, then flash the correct TWRP then use HuRUpdater to flash the ROM you want. This will definitely fix the issue.
Click to expand...
Click to collapse
The recovery images from Multi-Tool servers seem to work! Thanks a lot. I was able to get to erecovery, now I'll proceed as decribed by you! :good::good::good:
Edit: dload failed at 99%, but I was able to factory reset and get to the system after all!