Related
1st way :
Pulled full OTA file for Lenovo Vibe Shot - z90a40 ROW
Installation Procedures for the official rekaveri following:
Clean, not rutirovannaya and the changed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the file update.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select English and tychem to Install update.zip
What follows is some question about the installation. Select YES
The installation process is 100% dlitelnyy.Posle installation still some time to think. Do not panic.
After installation is complete, select the restart system . The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS
2nd way :
How to install TWRP rekaveri for the following:
Installed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the archive TWRP_lenovoota.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select Install and update the file with.
Make wipes are cache, dalvik-cache, data and phone.
After installation is complete, reboot the system. The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS
down load files : https://cloud.mail.ru/public/36qb/qhqsDGNVr
3rd: for who have problem with 1st & 2nd
1- download thise file :http://lenovo-forums.ru/topic/19311...363_160625_row/?do=findComment&comment=497835
2- Installing the firmware using QFIL on the Lenovo device based on Qualcomm chips:
(A)
We set vcredist_x86.exe , which go in the complete set with "proshivalschikom" itself;
set himself "flasher" - QPST.2.7.422.msi ;
install drivers for the Qualcomm chips - they are in the archive Qualcomm_USB_Drivers.7z
(B)
Completely turn off your device , and then we press the volume up key (Volume Up), and holding it connect the USB-cable which is already connected to the USB 2.0 port of your PC - in the Device Manager, you should see the device Qualcomm Lenovo HS-USB QDLoader 9008
3-Just install the firmware: -
(A)
Run the program QFIL
In the Programmer patch specify the path to the file prog_emmc_firehose_89XX.mbn (in my case prog_emmc_firehose_8916.mbn)
, for this click on Knop «the Browse» , in the window that opens, specify the path to the folder with the firmware (in my case ROW_S121), then choose prog_emmc_firehose_89XX.mbn file and click "Open" . then click on digging "the Load the XML ..." , alternately choose in the window that opens - first rawprogram0.xml and click "Open", and then patch0.xml and also click "Open".
http://lenovo-forums.ru/uploads/monthly_12_2014/post-53625-0-76252800-1419253051.png
(B)
Open the Device Manager on your PC, then turn off the device (smartphone or tablet) and take out the USB-cable from the device (if it was connected).
The device should restart at the successful process of filling the firmware and boot into Android OS.
http://lenovo-forums.ru/uploads/monthly_12_2014/post-53625-0-39327800-1419253052.png
for root :::::::::
1ST : Unlock BootLoader
1. Install the software package QPST and drivers LenovoUsbDriver , QualcommUSBDrivers on your computer ( drivers are archived Service QPST programs )
2. Unpack the archive Z90a40_Android-L_unlock_7M.7z to the root of any drive.
3. Connect the device ( Z90a40 ) to a PC via USB-cable.
4. On your device, turn on debugging by the ADB .
5. Run the utility QFIL :
- in the line Select Build Type , select the Flat the Build
- in line Select Programmer press the button Browse and specify the path to the unzipped files \ Z90a40_unlock_7M \ the img \ prog_emmc_firehose_8936.mbn
- click on the button Load XML and select the first rawprogram0.xml and then patch0.xml
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-1.png.661990ee862f9d3e35653a046c561c4a.png
6. Run Reboot_QDLoader.bat::
http://lenovo-forums.ru/uploads/mon...7M_3.png.3018b3c020fc59cdab5e8b73461cc42e.png
7. In the main program window to see that the device is switched to the mode Qualcomm HS-USB QDLoader 9008 .
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-2.png.a73fc14b40f138b5a2fa71480a6df072.png
8.Start the process of firmware bootloader unlocked by pressing the button Download .
(If you have not defined QFIL utility device Qualcomm HS-USB QDLoader 9008 mode, then you should check through the Device Manager on your PC - there are no problems with Qualcomm driver)
9. At the end of the process unlocked bootloader firmware to the device you will see a sign in the window Status QFIL program the following lines:
Download Succeed
the Finish Download
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-3.png.3a5566b24283b342edc285b724004305.png
10.Turning off the device from the USB-cable and clamp button Power to turn on the device (sometimes takes up to 10-20 seconds).
11. Open the main settings menu, the device and go to the " About phone -> Device Information " and press 7 times to select " Build number " until the display shows that you have become a developer.
12. Go back to the device's main Settings menu and go to the " For Developers " in " Factory Unlock " switch the toggle switch in the ON state .
13.Turn off the device (Z90a40), we press both volume buttons and connects to a PC via a USB-cable (the device enters the mode fastboot ), then run Unlock_Bootloader.bat
You should see the value of true if the secondary Bootloader check the status in the string the Device unlocked :
(Bootloader) Device tampered: false
(Bootloader) Device unlocked: true
(Bootloader) Charger screen enabled: false
(Bootloader) Display panel: A
OKAY [0.046s]
finished. total time: 0.046s
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-4.png.49581f68c35fd8e8922eaef936037988.png
14.So all of this unlocking process is completed successfully .
files need links :
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=56368
2nd: to do ( install TWRP 3.0.2.0 for Lenovo Vibe Shot )
Extract the folder TWRP archive TWRP-3.0.2.0_Z90a40_by_SevenMaxs.7z to the root of any drive
Turn off the device ( Z90a40 ), we press both volume buttons and connects to a PC via a USB-cable; the device will go into fastboot mode (on the PC must be set for the driver ADB).
Connect your phone to a PC via usb-cable, and run the Flash-TWRP.bat ( the Run-TWRP.bat for a single run TWRP.)
We are waiting for the phone to boot into TWRP
You can now disconnect the usb-cord
Installation is finished!
links : http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=56391
Login or TWRP:
On the device is turned off hold down both volume buttons and the inclusion of produce, release the power button immediately once the device is turned on and the volume buttons once away; boot logo TWRP.
3rd : install su from twrp
su.zip link : https://drive.google.com/file/d/0BxQ_dY80FUzYUXN6QThDd3pSWWc/view?usp=sharing
4th: install xposed.zip ( the erorrs have been solved)
link :
soooooooooooooooooooooon
soz for error happen before
updated 23/8/2016
that's all
Everything is fine, but TWRP in Russian how to change it to English?
xposed mode is not installing
in TWRP its said that I/O error on system folder.
MOD EDIT: Please don't quote the OP
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Sent from my Lenovo VIBEShot
shouk_1987 said:
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Sent from my Lenovo VIBEShot
Click to expand...
Click to collapse
Root successful :good:
but I cant able to xposed framework
because in TWRP its says "cp: can't stat "/system" I/O error"
---------- Post added at 03:49 AM ---------- Previous post was at 02:51 AM ----------
cant able to install xposed framework tried everything
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
xposed worked with me and now erorr
sorry for that but it solved try agine
since root of the rom I tried about hundred times but still xposed framework not installed ?
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
yasirriaz1977 said:
since root of the rom I tried about hundred times but still xposed framework not installed ?
Click to expand...
Click to collapse
Try new zip
shouk_1987 said:
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Click to expand...
Click to collapse
All work now
elbhrawy said:
Try new zip
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?act=attach&id=7533763&dlsess=8f37b888e4eb17f073e312a5fa82e658 new link give me error like this
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
yasirriaz1977 said:
http://4pda.ru/forum/index.php?act=attach&id=7533763&dlsess=8f37b888e4eb17f073e312a5fa82e658 new link give me error like this
Click to expand...
Click to collapse
I will upload now
elbhrawy said:
I will upload now
Click to expand...
Click to collapse
eagerly waiting for xpposed to work on my charmed device
yasirriaz1977 said:
eagerly waiting for xpposed to work on my charmed device
Click to expand...
Click to collapse
Updated
elbhrawy said:
Updated
Click to expand...
Click to collapse
Downloading ..........................................
when installed will update here soon.....:good:
update.........
same error
cp:can't stat '/system/xposed.prop': I/O error
updater process ended with ERROR: 1
Error installing zip file '/sdcard/Z90a40 restoration/xposed-v80-sdk23-arm64-by-romracer-20160202.zip'
update .........
after aforementioned error my device also unroot
now I am going to root it again
yasirriaz1977 said:
Downloading ..........................................
when installed will update here soon.....:good:
update.........
same error
cp:can't stat '/system/xposed.prop': I/O error
updater process ended with ERROR: 1
Error installing zip file '/sdcard/Z90a40 restoration/xposed-v80-sdk23-arm64-by-romracer-20160202.zip'
update .........
after aforementioned error my device also unroot
now I am going to root it again
Click to expand...
Click to collapse
its worked with me
elbhrawy said:
its worked with me
Click to expand...
Click to collapse
but its not worked for me, please do something
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
i have problem with update
the update.zip block at 45% update
i'll try with file TWRP_lenovoota.zip...where i'll put the file?
on sd card ...but i put it in specific folder? rename the file?
tnx in advance
il_milanese said:
the update.zip block at 45% update
i'll try with file TWRP_lenovoota.zip...where i'll put the file?
on sd card ...but i put it in specific folder? rename the file?
tnx in advance
Click to expand...
Click to collapse
use qfil better
I have the bootloader unlock and TWRP installed,
the TWRP recovery let me know that i have no SO installed.
how can I install/flash a rom without brick the phone with this recovery installed?
Things to mustnt do with TWRP installed?
i've been 2 days without phone(bricked). I need help
Thank you
a bit confussing cause the english not too good, look like translated from other language.
can somebody fix it?
so can i have root with marsmallow?
Thank U.
OTA update v363 Ok. Thank U.
Hi All,
Download Link for Official Stock Rom:
http://en.miui.com/download-333.html
Flashing Guide for Fastboot Update
Note: A Windows PC/laptop will be needed for the following steps. Make sure that your device is fully charged or has enough power for this process. All user data will be purged in this process. Please back up your data and think twice before proceeding.
Step 1
Download the Mi Flash Tool.
http://en.miui.com/forum.php?mod=at...1MDMxOXwxNTA2MjgzMzYyfDExNjI2MTk1OXw4MDcyNTI=
Step 2
Download the latest ROM package file for your device.
http://bigota.d.miui.com/7.8.23/tissot_images_7.8.23_20170823.0000.00_7.1_61cf97d794.tgz
Step 3
Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode. Then connect the device to the Windows PC/laptop via a USB Type-C cable.
Step 4
Decompress the downloaded ROM file and open the file folder for the decompressed ROM pack, then copy its path on the computer.
Step 5
Decompress the Mi Flash Tool downloaded in Step 1, and double click on it to install ( if there is security warning, select 'Run'). After installation is completed, open MiFlash.exe and paste into the address bar the ROM file folder path copied in the last step.
Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device. Then click the second button (circled out in red) to flash the ROM file to the device.
Note :
Clean all: All data and user configuration will be cleaned, and the lock state of the device is 'Unlocked' after flashing.
Save user data: All data and user configuration will be saved, and the lock state of the device varies with the device model after flashing.
Clean all and lock: All data and user configuration will be cleaned, and the lock state of the device is 'Locked' after flashing.
Step 6
Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version. Please wait patiently until the flashing process fully completed.
Happy Flashing!
Credits: Mi Forums
I got the latest one I would say?
Recovery file please
Can u please upload only the stock recovery dump file? I still haven't received my unit of Mi A1 yet, but I want to kick start the development...
Will flashing void warranty and is there a way they will detect it in the service centre?
ghpranav said:
Can u please upload only the stock recovery dump file? I still haven't received my unit of Mi A1 yet, but I want to kick start the development...
Click to expand...
Click to collapse
Xiaomi Mi A1 does not have recovery partition. Recovery is on boot.img.
The BLU VIVO XL4 has arived.
Sorry this guide is not for very new users, it relies on certain amount of prior knowledge.
**NOTE**
Unlocking Bootloader WILL set warranty flag to "NO"
Make the read-back backup, BEFORE unlocking, so there is a possibility to restore warranty to "yes"
Getting SPFlash Tool to work on BLU VIVO XL4
I used sp flash tool version 5.18.28
Needs custom DA file and Auth file. Both have been found from a near clone device.
Open flash tool select the DA file and Auth file from the link below.
add the scatter file from archive. There is a preloader file in the archive also. This is needed for spflash tool to open the Auth file.
Stock Rom and Auth file
Then follow the guide found on youtube.
Not planning to go into too much detail about the actual pulling of the firmware, as there is already
a fantastic guide with step-by-step photos and also a video.
Just the basics
Pull stock rom with spflash tool once just from the "boot region" to get the preloader file.
Process that file with the Wwr_MTK tool to get partition table information.
And one more time pull as one large binary file from the "user region" then split it into
individual images using the tool called "Wwr_MTK" it can be found on other site(Hovatek). I cannot put a
link as it is against forum rules (no advertising other forums)
But there is a youtube video that describes the process. And gives link for download of the tool.
**NOTE-1**
The Wwr_MTK tool did not have the correct chip (mt6762 In fact the "family class" for the chip is mt6765) as an option. Because of this you will need to add it to the tool before using it. Open the downloaded zip.( I used "WwR_MTK_2.40_Eng" ). Open "Template.ini" with text editing software, in the section labeled "CPU" add "MT6765 2" , keep same format as the rest of the file. Save the changes and close Template.ini.
Now when you run the tool, you will be able to create the scatter file as you split the rom into files.
**NOTE-2**
The tool connects to internet and downloads fresh the files and scripts when you start it. There is a 30 second ad screen displayed. If you block internet to the tool, then the add screen turns into 2 minute wait screen. I am not suggesting that you hack the tool to by-pass it, just letting you know what to expect.
IT IS HIGHLY RECOMMENDED TO MAKE YOUR OWN FULL BACKUP BEFORE PERFORMING THESE STEPS
AFTER YOU HAVE MADE FULL BACKUPS
Now to start modifying
DOWNLOAD
UNLOCK BOOTLOADER
unlocking bootloader is no more complicated then then enabling OEM unlock toggle in dev options menu.
Then performing Command in terminal. Just like so many android devices.
Unlock Bootloader
1. Enable Developer options on phone:
open settings--> "about device"--> click build number 5-7 times--> go back one screen in settings
-->select more "more settings" --> scroll to bottom "Develpoer options" --> enable "usb debugging"
2. Open cmd or power shell terminal
3. reboot phone to bootloader with the following commands
Code:
adb reboot bootloader
4.Once the phone has finished loading into fastboot mode type this command
Code:
fastboot oem unlock
I also did --MIGHT be an optional step
Code:
fastboot flashing unlock
Do not think both were needed.
After each command when phone was rebooted,
it took extra time to open. But did not show the normal recovery screen while
it did the factory reset. But a reset did happen both times,
as I had the setup wizard each time.
Even after unlocking bootloader, doing a "fastboot boot *xyz.img" (boot or recovery test images)
Phone would only cycle to off then do a full reboot. Doing "fastboot flash boot boot.img" does flash the boot.
And "fastboot flash recovery recovery.img" does flash the recovery.
TWRP
1. Download TWRP From Link above
2. Enable Developer options on phone:
open settings--> "about device"--> click build number 5-7 times--> go back one screen in settings
-->select "more settings" --> scroll to bottom "Develpoer options" --> enable "usb debugging"
3. Open cmd or power shell terminal
4. reboot phone to bootloader with the following commands
Code:
adb reboot bootloader
5. Now give the command to flash twrp, assuming you downloaded the file to default download folder
Code:
fastboot flash recovery %userprofile%\downloads\TWRP-3_2_3-1020-OMFG-mod_b6-device-name-vivo-wipe-misc.img
5. Reboot to twrp. Needed to boot directly to twrp, or stock recovery will be re-flashed by phone.
Code:
fastboot oem reboot-recovery
Once inside twrp It is asking for password to unlock (decrypt)***automatic decrypt not work on this device as of YET***
this is supposed to be same password used to unlock phone.
Because this twrp does not work with encryption, every time you reboot you will have to select language, if changed from default.
To get recovery to be functional, you need to make phone patched for both "DM-Verity" and "Force-encryption"
I do this with
"Universal Disabler"
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
There is similar utiliy built into this Recovery image.
to use the built in option , Select ADVANCED, Then RM Forceencrypt
This will flash the lazypatcher with options set to remove encryption both in boot.img and /vender/*fstab : remove dm-verity.
--OR-- manually do the following steps
Steps
1. Download Zip from Link above.
2. Open TWRP
3. Open Wipe menu
4. Select format /data
5. Key in "YES" and swipe
6. Return to Home Page of TWRP
7. Choose reboot menu then recovery
8. Recovery should now have access to Internal memory (temp for now)
9. Use abd push to put the zip file downloaded above to internal memory
Code:
adb push %userprofile%\downloads\Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip /sdcard/
10. Select install menu , and install the Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip
Do not rename the file. It installs and makes the patch base on the file name.
If you want to have root also, then flash Magisk at this point.
Now the dm-verity and force encryption are off. You can flash gsi custom rom, if you desire. At the moment, I have only been able to boot the phone with working cell data and calls on the PHH-Phusion --vanilla builds. Do not know why the gapps versions do not allow rill to function.
As of the writing of this I have put up V4 of the TWRP port. This version uses the correct mount points for this phone, not the ones from the source of the port. Also corrected the device name in default.prop, to match device name. Build fingerprint has been left as is. Fixed the micro sdcard name and OTG names. Added mipe to the "misc" /"para" partition to escape a factory reset recovery loop that [uu]could[/u] happen under certain situations.
And my prefered ported recovery from LRTeam TWRP-3_2_3-1020-OMFG-mod_b6-device-name-vivo-wipe-misc.img.
DOWNLOADS
Files
1. Sp Flash tool (v 5.18.28 or newer) https://androidmtk.com/smart-phone-flash-tool
2. stock XL4 ROM, DA file, TWRP all in shared folder https://androidfilehost.com/?w=files&flid=287088
3. stock Xi+ ROM, TWRP in shared folder https://androidfilehost.com/?w=files&flid=287703
4. Unviversal DM-Patch disable tool thread
5. Youtube Guide Video to use backup image splitter tool "WWR_MTK" https://www.youtube.com/watch?v=GMAytZ56hac
Kernel sources have been published 12-12-2018, by BLU
I have them synced to GitHub while I make test builds.
https://github.com/mrmazakblu/BLU-VIVO-XL4-kernel
Default defconfig should be arch/arm64/config/k62mv1_64_bsp_defconfig. Based off of build description in "getprop"
Built kernel has not been able to be booted yet.
TWRP is first ported and provided thanks to @Voinea12
.
placeholder not really welcomed here on XDA
just pm a moderator or report this thread when you`re ready to upload something, until then, thread closed
After seeing that the Blu vivo xl4 requires an "auth file" in order to flash with spflash tool, I asked BLU to supply the file.
They responded with a big fat NO.
.......
.......
THE NEXT DAY THE FILE WAS POSTED ON A DIFFERENT THREAD.
SO THERE HELP WAS NO LONGER NEEDED.
Just made successfull readback on preloader. and currently reading full rom.
will post link when done.
here is auth file and DA file I used.
pulled firmware is here.
there are more images in complete firmware, but the ones included should be enough , as long as you NEVER do format all from spflash tool.
STOCK ROM
So far all attempts to load twrp have failed.
Also just tried to flash boot.img with the built kernel. When rebooted, phone just stayed on black screen. No back-light , nothing.
Just a repeating connect disconnect sound from pc. Long pressing power and trying to get into the bootloader menu failed.
Was able to Que up sp flash tool and keep holding the volume down button , on the next time it cycled on off preloader was caught and i was able to flash back the correct boot.img.
Working version is available now
Thread was opened.
mrmazak said:
So far all attempts to load twrp have failed.
Also just tried to flash boot.img with the built kernel. When rebooted, phone just stayed on black screen. No back-light , nothing.
Just a repeating connect disconnect sound from pc. Long pressing power and trying to get into the bootloader menu failed.
Was able to Que up sp flash tool and keep holding the volume down button , on the next time it cycled on off preloader was caught and i was able to flash back the correct boot.img.
Click to expand...
Click to collapse
My streak with SP Flash is still a losing one, the auth file works for my phone as well (Blu Vivo XI+), I just used the preloader.img that was in the update.zip and ran it through the WwR MTK Tool and got the preloader.bin to go with the auth file as you indicated you had done, that was one hurdle that your post helped me solve, but for some reason when I start reading the full rom I get about 6-10 MB into it and then it disconnects from my phone and stops. Not sure if its driver related or what, which drivers did you use for the readback?
psychofad said:
My streak with SP Flash is still a losing one, the auth file works for my phone as well (Blu Vivo XI+), I just used the preloader.img that was in the update.zip and ran it through the WwR MTK Tool and got the preloader.bin to go with the auth file as you indicated you had done, that was one hurdle that your post helped me solve, but for some reason when I start reading the full rom I get about 6-10 MB into it and then it disconnects from my phone and stops. Not sure if its driver related or what, which drivers did you use for the readback?
Click to expand...
Click to collapse
To be honest I have not installed driver specific for this. I have vcomm drivers installed, same from couple years ago.
Is the readback stopping because you set wrong hex address length in the readback tab?
mrmazak said:
To be honest I have not installed driver specific for this. I have vcomm drivers installed, same from couple years ago.
Is the readback stopping because you set wrong hex address length in the readback tab?
Click to expand...
Click to collapse
No, I got the readback of the EMMC_USER just fine and ran it through the WwR MTK tool and it gave me the hex address to use for the full rom readback, t then told me
Code:
The file size is smaller than the start position of the LK (uboot). To determine the type of processor and memory, it is necessary to read the full firmware in the SP Flash Tool, specify the parameters for reading: Start address: 0x0, Lenght: 0x1D1EC00000.
So I entered those two addresses as EMMC_USER readback. If my phone is off and I just connect it to the usb without holding any keys it gives me another error.....and I'm an idiot. just figured it out as I was looking at logs, apparently I must have changed the usb speed in sp flash which changes it's pid causing it to try and read from another port. It's downloading now
Thanks to @hanuma there is now a material themed twrp port.
The V2 version loads. But has no adb or mtp access
https://forum.xda-developers.com/showpost.php?p=78498431&postcount=95
https://mega.nz/#F!225EzQwT!t8hvGvmFoNYNvXev-Li1fQ
******EDIT*****
Most of the following problems did not repeat in same way when I tried to repeat the install process.
Main issue was with simcard. But exact process to get installed and working is still not known.
-- install after already having rooted, encryption removed stock, seems to work.
-- fresh full stock rom, full encryption, then gsi seems to not work sim card.
PHH-treble gsi images do boot this device. I do not have a bug list as yet.
working:WITH encryption removed:
1. wifi
2. camera
3. fingerprint- unlock
4. music
5. video
NOT working :WITH encyyption removed:
1. cell signal
2. cell data
3. phone
4. sms
---------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------
working:WITH encryption enabled
1. phone
2. sms
NOT working:WITH encryption enabled
1.. everything else
EDIT
Much of the force closing problems were from a corrupted external sdcard. When I removed the card , the force close messages did not come.
Getting 4G data connection was not stable. after a full reset and rom re-install I was not able to get data connection, and only able to have connection to make calls when set to 3G connection only.
some bugs in vendor I assume will need some help solving this.
EDIT 2
Finally got around to trying again. his time I started with vanilla version of phh-treble gsi.
4G data and sms, calls in out all work. Camera , video both work.
WiFi tethering did not work.
Setup that worked :
force encryption removed with universal dm-verity patcher, ( bothboot.img and vendor partitions both edited).
magisk patched boot
Would this work on Blu Vivo XI since same chipset?
sinkoo1979 said:
Would this work on Blu Vivo XI since same chipset?
Click to expand...
Click to collapse
It should. I have been working with few users with Xi+ it works for them. And another user of Xi provided a twrp port, but no details on if this read-back worked. It must have, I suppose it must have.
Please do try to do the readback for your self, and share the files. will help with twrp if I can
Guide has been revised.
The original guide suggests to format /data and patch device to remove force encryption. This works fine for stock rom, and modifying stock rom. But I have found that removing encryption will not allow the phone to work as a phone when flashed with GSI. The down side is, at the moment, there is no twrp that is working to read the encrypted /data.
mrmazak said:
Guide has been revised.
The original guide suggests to format /data and patch device to remove force encryption. This works fine for stock rom, and modifying stock rom. But I have found that removing encryption will not allow the phone to work as a phone when flashed with GSI. The down side is, at the moment, there is no twrp that is working to read the encrypted /data.
Click to expand...
Click to collapse
Can any of this be done without a computer
Decaphyz said:
Can any of this be done without a computer
Click to expand...
Click to collapse
No, you need fastboot(PC preogram) to unlock bootloader and either sp flash tool or fastboot to flash recovery.
mrmazak said:
No, need you fastboot(PC preogram) to unlock bootloader and either sp flash tool or fastboot to flash recovery.
Click to expand...
Click to collapse
Oof
mrmazak said:
Thanks to @hanuma there is now a material themed twrp port.
The V2 version loads. But has no adb or mtp access
https://forum.xda-developers.com/showpost.php?p=78498431&postcount=95
https://mega.nz/#F!225EzQwT!t8hvGvmFoNYNvXev-Li1fQ
Click to expand...
Click to collapse
I just did this, and it worked the first time. I got into the phone and set it up. But it was super laggy after a while. So I decided to reset the phone like how you would normally do to fix a problem, and now... it’s making me boot into the recovery each and every time I try and boot into the system... i installed the gsi rom "PixelExperience for AOnly" at max lees site
IndifferentBear said:
I just did this, and it worked the first time. I got into the phone and set it up. But it was super laggy after a while. So I decided to reset the phone like how you would normally do to fix a problem, and now... it’s making me boot into the recovery each and every time I try and boot into the system... i installed the gsi rom "PixelExperience for AOnly" at max lees site
Click to expand...
Click to collapse
dont panic. this is minor bug. Easiest way to solve is to flash stock recovery. and do factory reset from there.
You can install image from twrp or fastboot, even spflashtool.
It is from the flag that is set into para(misc) partition.
You can clear it manually with terminal also, or even use one of the othe rtwrp images I shared. One with "misc" in the file name.
If you use one of those recoveries and do reset will also clear that reboot condition
mrmazak said:
dont panic. this is minor bug. Easiest way to solve is to flash stock recovery. and do factory reset from there.
You can install image from twrp or fastboot, even spflashtool.
It is from the flag that is set into para(misc) partition.
You can clear it manually with terminal also, or even use one of the othe rtwrp images I shared. One with "misc" in the file name.
If you use one of those recoveries and do reset will also clear that reboot condition
Click to expand...
Click to collapse
thanks dude! can you give me the command to run in terminal to do it? ill try that first, then ill try flashing stock recovery!
---------- Post added at 02:47 AM ---------- Previous post was at 02:44 AM ----------
mrmazak said:
dont panic. this is minor bug. Easiest way to solve is to flash stock recovery. and do factory reset from there.
You can install image from twrp or fastboot, even spflashtool.
It is from the flag that is set into para(misc) partition.
You can clear it manually with terminal also, or even use one of the othe rtwrp images I shared. One with "misc" in the file name.
If you use one of those recoveries and do reset will also clear that reboot condition
Click to expand...
Click to collapse
but i was required to wipe the sys, data, cache, and dalvik/art to have a clean install.
---------- Post added at 03:33 AM ---------- Previous post was at 02:47 AM ----------
mrmazak said:
dont panic. this is minor bug. Easiest way to solve is to flash stock recovery. and do factory reset from there.
You can install image from twrp or fastboot, even spflashtool.
It is from the flag that is set into para(misc) partition.
You can clear it manually with terminal also, or even use one of the othe rtwrp images I shared. One with "misc" in the file name.
If you use one of those recoveries and do reset will also clear that reboot condition
Click to expand...
Click to collapse
YO! Oaky so basic laly when i flashed that misc recovery IT BOOTED!!!!! thank you soo much dude, your the best!
Welcome to this little thread in which I'll provide every useful information about this device based on my and other users's experiences. If you know something, that I didn't mention, please reply to this thread in order to help out each other even more effectively. Thanks and pleasant reading!
The Lenovo S5 Pro is a very decent mid-ranger with good specs and even better pricing. We all know, that chinese manufacturers tend to install bloatware on their products time to time. In our case, Lenovo didn't release a single update since 2018 Novemer to this device. It means, that it came out with Android 8.1 Oreo (2018 November Security Patch) and left untouched. This is even worse, than Meizu which is famous for it's neglecting policy of software updates for global users. Now, that we know all this, it's not a surprise, that we are here on our favourite developer forum.
*** General information | Links | Downloads | Credits ***
The official global firmware is now saved and available (thanks to our forum member nikosddesign) here: download & link to the post
Everything you will possibly need (PC software, drivers, stock camera app, VoLTE modem etc...) is available in this Yandex Disk, you just have to navigate to each one. (Most of the content is in russian, since Yandex is the russian Google, but it's not hard to find the files you'll need).
The previous links and the following tutorials are only available, because suninterbru (from 4pda forums) and radiationofthenation provided these informations and the tutorials, also so much thanks to everybody on the 4pda forums, who provided useful information and files, большое спасибо!
Even though the bootloader unlock, TWRP install and rooting should not cause data loss, be careful and create a backup. You can back up only your files and data or your whole ROM, it's up to you.
Please note, that after you've unlocked your bootloader, everytime your reboot or turn on your phone a warning will pop up during the boot process for about 1 second. On Android 9.0 Pie vendor the message pops up for about 5 seconds. The warning is about the side effects of modifying the system software and it also says, that it is not recommended to store any personal data on your device anymore. Please ignore this message, since it's only popping up, because manufacturers usually don't like, if you modify your device.
Pro tip: If you keep pressing your power button for a little longer you can skip the alert and boot faster.
*** Bootloader unlock ***
Please note, that your warranty will become invalid/void after you unlock your bootloader or root your device.
0. In your device's developer settings enable bootloader/OEM unlock and USB debugging.
1. Visit the official ZUI bootloader unlock website.
2. Enter your IMEI1 number in the first field. (You can find your IMEI numbers in Settings\About or in the dialer enter: *#06#).
3. Enter your serial number in the second field. (You can find your serial number in the fastboot menu). The one in the settings is not good in this case! (To access the fastboot menu, turn off your phone, then press the power button and after you see your screen light up, immediately press the volume down (-) button or while it's turned on and USB Debugging is enabled, simply type in the terminal/cmd ,,adb reboot bootloader").
4. In the next field enter your email adress. (Please note, that Tutanota won't work, Gmail is recommended or other not secure email providers).
5. Enter the verification numbers in the last field.
6. Tick the checkbox.
8. Click on the blue button.
7. Now check your inbox and/or spam folder, because Lenovo just sent you your custom sn.img, only for your phone.
8. Save the sn.img to your PC and install ADB drivers system-wide. (Thank you Snoop05 for your work)!
9. Open a terminal/cmd on Windows. You should be in the same directory, where your sn.img file is, with the terminal. To change directories type ,,cd your directory goes here" and hit ENTER.
10. Run the following commands:
- adb reboot bootloader
- fastboot flash unlock sn.img
- fastboot oem unlock-go
11. Congratulations! Your bootloader is now unlocked!
*** TWRP Recovery ***1. Download the .img file from here.
2. The steps are similar to the bootloader unlocking:
- adb reboot bootloader
- fastboot flash ,,downloaded" .img
- After the flashing is done DON'T reboot to the system, instead navigate to the ,,Reboot Recovery or Recovery Reboot" option and select it. (Volume keys and power key - you know the drill) This will ensure, that the TWRP Recovery doesn't get ereased on reboot(s)!
3. After you've successfully rebooted into TWRP, you should root your device with Magisk, to prevent the recovery erasure!
*** ROOT ***1. The good old SuperSU is no longer in the picture, but don't worry a new player is in the game. Download Magisk from here. (Thank your for your work topjohnwu)!
2. After you've downloaded the flashable .zip copy it to the main directory/root of your device.
3. Reboot to TWRP.
4. Click install, select the flashable .zip file.
5. The installation process should start.
6. Reboot, after finished.
7. Check if Magisk Manager is installed or not, if yes tap and update it.
8. If you did not succeed, please check the Magisk topic for solutions or reply to this thread.
*** Factory reset | Stock ROM | Unbrick | LOST IMEI/PERSIST/EFS | QCN BACKUP/RESTORE ***
!!! NEVER EVER TICK ,,ERASE ALL BEFORE DOWNLOAD" IN QFIL, OTHERWISE YOU WILL LOSE YOUR IMEI AND THE ABILITY TO CONNECT TO MOBILE NETWORKS !!!
If you accidentally clicked on that option you will have to restore someone elses QCN backup. (It will not work, if you backup your own QCN and rewrite your IMEI and restore it, so do not waste your time with that)! Luckily, a member of the 4PDA forums published their qcn backup. (большое спасибо geepnozeex)! QCN backup for Lenovo S5 Pro. (I modified the link, because the original one is no longer valid)
1. Download the linked QCN file.
2. Make sure, that you are on one of the Stock ROMs, however the recommended ROM is this one.
3. You will have to be rooted to put your device in diagnostics mode. To do that, follow this tutorial.
4. You will have to edit the QCN file with HxD, in order to write your own IMEI into.
5. Open the file with HxD and search for 08 8A 76 06 06 14 57 95 32. This is the IMEI 2. You will have to insert your IMEI 2 from the box here, but first you will have to convert it into Hexadecimal numbers.
6. Convert your IMEIs into Hexadecimal numbers here.
7. You will have to rewrite and insert your values insted of the previous one.
8. Search for 08 8A 76 06 06 04 67 98 72. This is IMEI 1. Convert your IMEI 1 into Hexadecimal numbers, too and replace.
9. Save the file (Ctrl + s)
10. Open QFIL and click on Tools, then QCN Backup/Restore.
11. Choose the QCN file, you wrote your IMEI into.
12. Click on Restore QCN.
13. There is a chance, that the process/progress bar won't finish till the end. No problem, just reboot to EDL mode through TWRP/Advanced and restore the recommended stock ROM.
14. You should have everything working fine, now.
To factory reset or unbrick your device, follow this tutorial on 4PDA. [Don't panic you don't have to know russian, just follow the instructions on the pictures! To see the pictures, click on the bold text.] ,,(спойлер (+) (Инструкция по прошивке)" ~ or ~ Download any of the previously linked STOCK ROMs to your device's main folder and flash them through TWRP. Most of them are in flashable .zip formats and should work well. A simple factory reset in TWRP is recommended before installing any of the ROMs, be careful this action will erease your data from your phone!
(Please note, that most of the time you'll have to use the QPST/QFIL method, because the flashable .zip files always expect a specific vendor version, usually a lower one, so you can upgrade with flashable .zips, but possibly can't downgrade, so you have to use QFIL)!
*** GSI custom ROMs ***
Our device is arm64-aonly, so please only use according GSIs. Note, that I will link only those GSIs, which are booted successfully on my device!
~ phhusson's official GSI list: here
~ phhusson's AOSP GSI (Android Open Source Project): here
~ developerluke's ExpressLuke GSIs: here
~ eremitein's CAOS GSI Project: here
~ eremiten's LOSQ GSI Project: here
~ igors1974's Amber GSIs: here
~ tunasahinn's and yek4perf's Tunahan's GSI builds: here
~ mrsshunt3r's albus-gsi: here
Note, that you should keep up with the developments and update your system, if needed! These are just a few GSIs, that I've tested personally on my phone, but you can always keep up with the latest news and try new GSIs out, thanks to phhusson's official GSI list!
*** How to flash an Android 10 GSI ***
1. Download the latest custom phh-magisk from here. (Thank you developerluke and phhusson)!
2. Download the latest Disable_Dm-Verity_ForceEncrypt from here. (Thank you Zackptg5 and others)!
3. Download your desired GSI.
4. You can flash from an USB-OTG flash drive or from the storage of your phone. (I personally have a dedicated USB for this purpose).
4.1 If you are coming from stock ROM you will most likely need to Format Data in this step, because the Disabler won't be able to decrypt the data and, that will cause a stuck at the boot logo!
4.2 Reboot Recovery
5. In TWRP perform a normal factory reset
6. Flash Disable_Dm-Verity_ForceEncrypt. (Cache wipe is optional).
7. Flash your GSI image.
8. Format Data (Skip this step if you already did this in 4.1)!
9. Reboot Recovery (Skip this step, too if you already did this in 4.2)!
10. Flash Magisk-phh
(11. Wipe cache/dalvik).
12. Reboot System
13. Enjoy!
*** Possible GSI bugs ***
Please note, that bugs can differ/vary on different GSIs, the numbers are not fully accurate!
1. The default camera app will work, however it doesn't support HDR, panorama or portrait modes. It also can't record in 4K resolution. Freezing is also possible. ~ 50%
2. First time, when you open the camera it'll stuck on loading, but after you go back and open it again it will work flawlessly. ~ 50%
3. No audio/microphone during phone calls. ~ 15%
*** Guaranteed GSI bugs*** 1. The infrared face unlocking will not work, only fingerprint authentication is working. ~ 100%
2. You won't be able to charge your device while it's turned off, after you plug it in, it will automatically boot up. ~ 100%
3. Auto brightness. ~ 100% (There is a fix for auto brightness below)!
*** Camera fix (GSI) ***
(If you get ,,serious camera error" or your camera freezes on HDR)
1. Download a custom camera app, where you can manually adjust the ISO level.
2. With OpenCamera, for example you have to adjust ISO to 800 and never above, because your camera will freeze!
3. So, always keep ISO 800 or under. With these settings even HDR shots are working!
*** Auto brightness (GSI) ***1. Download framework-res__auto_generated_rro.apk from this thread.
2. Follow the instructions, which are described in this post. (You will need to have root to use ,,su" commands).
3. Thank you MishaalRahman and kAs1m for the apk and the instructions!
Twrp disappears when restarting
Help, twrp disappears when restarting. After installing it by: "fastboot flash recovery trwp.img". right there I start it with the "Vol + Power" keys and it starts correctly but when you turn it off and back in, "stock recovery" appears again. I also installed it again using the same twrp, but it disappears again.
kcire_eae said:
Help, twrp disappears when restarting. After installing it by: "fastboot flash recovery trwp.img". right there I start it with the "Vol + Power" keys and it starts correctly but when you turn it off and back in, "stock recovery" appears again. I also installed it again using the same twrp, but it disappears again.
Click to expand...
Click to collapse
Hello, please don't reboot after sending the recovery image to the phone. Execute the:" fastboot reboot recovery " command. Now it is going to work.
Halwer said:
Hello, please don't reboot after sending the recovery image to the phone. Execute the:" fastboot reboot recovery " command. Now it is going to work.
Click to expand...
Click to collapse
It didn't work, given: "fastboot: usage: unknown reboot target recovery" Sorry for the long time to answer, I only have mobile data, and from this same mobile I answer, and I use google translator, I'm from Mexico.
Halwer said:
Hello, please don't reboot after sending the recovery image to the phone. Execute the:" fastboot reboot recovery " command. Now it is going to work.
Click to expand...
Click to collapse
Foto
kcire_eae said:
Foto
Click to expand...
Click to collapse
Well, it looks good. Maybe only " reboot recovery " is enough.
Halwer said:
Well, it looks good. Maybe only " reboot recovery " is enough.
Click to expand...
Click to collapse
It didn't work, friend, but I appreciate the help.
kcire_eae said:
It didn't work, friend, but I appreciate the help.
Click to expand...
Click to collapse
I'm sorry. Do an internet search and check related TWRP forums for solutions for this specific issue. For me everything is working fine. Are you sure you unlocked your bootloader first?
Halwer said:
I'm sorry. Do an internet search and check related TWRP forums for solutions for this specific issue. For me everything is working fine. Are you sure you unlocked your bootloader first?
Click to expand...
Click to collapse
Help, I did the following and I no longer start my mobile:
-fasboot flash recovery twrp.img.
-fasboot flash boot twrp.img.
-fasboot reboot.
now just start twrp even if restart restart twrp again, in the twrp browser my sdcard files are shown, maybe you can still help me please.
kcire_eae said:
Help, I did the following and I no longer start my mobile:
-fasboot flash recovery twrp.img.
-fasboot flash boot twrp.img.
-fasboot reboot.
now just start twrp even if restart restart twrp again, in the twrp browser my sdcard files are shown, maybe you can still help me please.
Click to expand...
Click to collapse
You should not have flash the recovery image to the boot partition. These partitions are not the same, be careful! Now you can save your data from TWRP via MTP connection to your computer. After that restore your phone with QPST to the latest pie ROM or to the oreo ROM from yandex. The oreo ROM is flashable from recovery, it is easier.
Halwer said:
You should not have flash the recovery image to the boot partition. These partitions are not the same, be careful! Now you can save your data from TWRP via MTP connection to your computer. After that restore your phone with QPST to the latest pie ROM or to the oreo ROM from yandex. The oreo ROM is flashable from recovery, it is easier.
Click to expand...
Click to collapse
Is it possible to just flash the boot partition (boot) again, if I get the boot.img from another rom?
I don't want to lose the stock rom:crying:
kcire_eae said:
Is it possible to just flash the boot partition (boot) again, if I get the boot.img from another rom?
I don't want to lose the stock rom:crying:
Click to expand...
Click to collapse
Maybe you can try to download a ROM file, extract it and flash the boot image, but I'm not sure if it is going to work.
Halwer said:
Maybe you can try to download a ROM file, extract it and flash the boot image, but I'm not sure if it is going to work.
Click to expand...
Click to collapse
I'm going to try, and even,
on this page there are android 9, will it be true?
"https: // mirrors.lolinet.com/ firmware / lenovo /l58041/"
but first I will do it with the "O" stock, which you mention here.
I hope it will work again.
kcire_eae said:
I'm going to try, and even,
on this page there are android 9, will it be true?
"https: // mirrors.lolinet.com/ firmware / lenovo /l58041/"
but first I will do it with the "O" stock, which you mention here.
I hope it will work again.
Click to expand...
Click to collapse
You should do the oreo version, if your were on the global oreo ROM. After that you can try the pie version, if nothing works don't worry you can do a backup of your data from twrp to your computer and flash a custom ROM or the chinese Pie version, which is recommended. With root access you can easily debloat the chinese ROM and with AdAway you can disable all communications pointing to chinese servers or websites. I also found these. Maybe you can give them a try.
After a few hours I was finally able to install the "Chinese stock rom", although I struggled, since the files of the "rom" of the l58041 do not quite coincide with the "stupdroid" tutorial and some files have two different versions, something like that:
here I chose the "ddr" .
prog_emmc_firehose_xxxx_ddr.mbn (.elf). prog_emmc_firehose_xxxx.lite.mbn (.elf).
here I chose the "retain_userdata".
rawprogram0.xml. rawprogram0_retain_userdata.xml.
and in qfil "Flat Build", however I don't know if it was the right thing because at the beginning I was asked for a password ("but that's another topic").
To add a language (without root), use local more apk.
"https: // c. mi. com / thread-2098669-1-0.html"
To root the "radiationofthenation" thread worked me.
"https:. //forum .xda-developers . com/general/help/lenovo-s5-pro-root-global-firmware-help-t3895643/page2"
kcire_eae said:
After a few hours I was finally able to install the "Chinese stock rom", although I struggled, since the files of the "rom" of the l58041 do not quite coincide with the "stupdroid" tutorial and some files have two different versions, something like that:
here I chose the "ddr" prog_emmc_firehose_xxxx_ddr.mbn (.elf). prog_emmc_firehose_xxxx.lite.mbn (.elf).
here I chose the "retain_userdata" rawprogram0.xml. rawprogram0_retain_userdata.xml.
and in qfil "Flat Build", however I don't know if it was the right thing because at the beginning I was asked for a password ("but that's another topic").
To add a language (without root), use local more apk.
"https: // c. mi. com / thread-2098669-1-0.html"
To root the "radiationofthenation" thread worked me.
"https:. //forum .xda-developers . com/general/help/lenovo-s5-pro-root-global-firmware-help-t3895643/page2"
Click to expand...
Click to collapse
I'm glad it is working for you now. Yes, you are right the tutorials flap at some points, but there are other tutorials which you can follow and make it work. For the first time I was struggling with the restoration, too. You will see, that the chinese ROM is quite good, you just have to uninstall the bloatware and disable spying DNS requests.
Halwer said:
I'm glad it is working for you now. Yes, you are right the tutorials flap at some points, but there are other tutorials which you can follow and make it work. For the first time I was struggling with the restoration, too. You will see, that the chinese ROM is quite good, you just have to uninstall the bloatware and disable spying DNS requests.
Click to expand...
Click to collapse
Ohh, explain more about spying. And also if you know something about the message that Android told me when I start. I remember that I flashed twrp.img using "fastboot", and when I asked for a password to decrypt, it only allowed me to clear cache and dalvit cache (I did wipe), and when I started again I showed a message saying that I was encrypting and a percentage, just here, I interrupted the process by turning off the cell phone, and flashed again with qfil (download). So when I start I just remember that I said something about the cell phone being restored and then I could restore the copy with my Google account. So what I think is that when the message of "TO START ANDROID ENTER YOUR PASSWORD" is displayed, it may work to interrupt or perhaps to put the incorrect password many times to automatically reset or also choose "rawprogram0.xml" in qfil (but I did not dare because it deletes it the information related to the imeil and the signal or at least that says some comments ). Now there is only one who can interpret what happened and to have clearer the restoration process, the rom seems to me very much the problem of the language is solved with "more local", I am from Mexico (At & t).
good morning i have good new
i have been backing up the global rom
just wants to go a long time it is super compressed 3.5giga and it is regular size 10.6 g
nikosddesign said:
good morning i have good new
i have been backing up the global rom
just wants to go a long time it is super compressed 3.5giga and it is regular size 10.6 g
Click to expand...
Click to collapse
Thank you, I'm sure some people will find it very useful!
Hello
it's about 4gigabyte have to be patient.
i have very bad internet connection...
Thanks for @urbanman2004 guide for Poco X3 Pro. Some sentences still needed, so keeping it similar.
This guide provides photos & screenshots.
Simulate all process and reduce misunderstanding.
Spoiler: Disclaimer
* May loose warranty after unlock according to Xiaomi policy of the country you bought phone from. Check it yourself.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected users.
Section 1: Unlock bootloader
(Works for most Xiaomi/Redmi/Poco phones)
Keep phone with more than 60% battery.
Spoiler: Click to show
1. Register Xiaomi account on PC or Phone doesn't matter. (Use same account in all steps)
Might ask SMS verification. Keep phone number for this Mi Account until all unlock process done and successfully booted into MIUI after step 21.
Click to expand...
Click to collapse
2. On phone, sign in your Mi Account from setting. (Use same account in all steps)
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Turn on Developer option:
Spoiler
Settings→ About Phone (My Device)→ tap on MIUI version (For POCO) until it says Developer options enabled at the bottom.
4. Turn ON "Find my device"
Spoiler
5. Back out to Settings, Additional Settings→ Developer options→ Mi Unlock status.
Spoiler
6. DON'T DO STEP 6 ANYMORE after done it ONCE. Will reset countdown timer if you do that.
DON'T DO STEP 6 ANYMORE after done it ONCE. Will reset countdown timer if you do that.
SIM card inside phone with mobile data doesn't need to be the one linked to Mi-account. Can put a different SIM card as long as it can use mobile data.
Only during step 6 you turn off WIFI and turn on mobile data.
Can do whatever you want to WIFI and mobile data anytime before and after step 6. There's no restriction other than step 6.
Can remove your SIM card once step 6 was done. But you still need the number linked to Mi-Account accessible to receive SMS if Mi-Account ask for verification.
7. Wait for 7 days (Day 1). DO NOT LOG OUT your Mi-Account on your phone.
Try not to use phone too much as later will do factory reset and loose all data.
Or backup manually. Not gonna write how to backup.
No need to connect internet (mobile data and WIFI) all the time.
Can use your phone
Can even power off phone in the meantime. (Thanks for @kamild_ answer)
Spoiler
8. Wait for 7 days (Day 2). DO NOT LOG OUT your Mi-Account on your phone.
9. Wait for 7 days (Day 3). DO NOT LOG OUT your Mi-Account on your phone.
10. Wait for 7 days (Day 4). DO NOT LOG OUT your Mi-Account on your phone.
11. Wait for 7 days (Day 5). DO NOT LOG OUT your Mi-Account on your phone.
12. Wait for 7 days (Day 6). DO NOT LOG OUT your Mi-Account on your phone.
13. Wait for 7 days (Day 7). DO NOT LOG OUT your Mi-Account on your phone.
14. Download Xiaomi Unlock tool for Windows PC.
Direct download link (English Version 5.5.224.55)
Spoiler
Spoiler: Linux and macOS users
XiaoMiTool (v2)
https://www.xiaomitool.com/
https://github.com/francescotescari/XiaoMiToolV2
15. Extract all files into short-named folder. Go into folder and double click on miflash_unlock.exe
Different versions, double click on batch_unlock.exe
Spoiler
16. Sign in your Mi Account. (Use same account in all steps)
Spoiler
17. Connect phone with official USB cable to PC. Check on PC if see device.
Turn OFF all locks (screen lock, face lock, fingerprint, pin, bluetooth lock.)
Turn ON "Find my device"
Logout Google
If not detected, do as in spoiler:
Spoiler
Double click on MiUsbDriver.exe
Should see your phone now.
Reboot your PC.
or Google's latest USB drivers for Windows if it else fails
NOTE: If Windows does not recognize the device due to it automatically installing the wrong "Kedacom Device Driver" then you will have to manually install the drivers for "Android ADB Interface/Android Bootloader Interface".
Backup your data from your phone now. You will loose ALL your data on your phone after step 20.
Click to expand...
Click to collapse
18. Shutdown/ Power off phone normally manually.
When screen turns all black for about 30 seconds, hold Vol down + Power button together to enter Fastboot mode.
(Picture from GSMarena)
Should see Fastboot on phone screen
Spoiler
19. Connect your phone with official USB cable to PC. Should see on PC a device listed. (Locked)
Spoiler
If not detected, do as in spoiler:
Spoiler
Double click on MiUsbDriver.exe
Connect phone to computer via official USB cable, and confirm your phone shows up recognized as "Android Bootloader Interface" (in Device Manager)
Reboot your PC.
or Google's latest USB drivers for Windows if it else fails
NOTE: If Windows does not recognize the device due to it automatically installing the wrong "Kedacom Device Driver" then you will have to manually install the drivers for "Android ADB Interface/Android Bootloader Interface".
WARNING !!! From the step later, you will loose ALL your data on your phone. Backup your data from your phone.
Click to expand...
Click to collapse
Take out microSD card from device in case something went wrong and destroy microSD card.
Click to expand...
Click to collapse
20. Press Unlock, Unlock, Unlock anyway, Unlock anyway. (If you are worried of what it's warning you, don't unlock and don't think of custom Roms or root.)
Spoiler
If see this or some hours left, wait for remaining countdown hours (count it yourself) and start from step 17 again.
The countdown is done on Xiaomi server. Can close the unlock program during the meantime.
Exit Fastboot mode:
Spoiler
Unplug phone from PC and hold power button until screen turns black. Will boot into MIUI.
21. Wait phone boot up, or press Reboot phone if it did not reboot itself.
If you see this after boot up, use Wifi or insert SIM card with mobile data access and enter your Mi Account password.
##End of Unlock Bootloader process
Donate if you find it helpful: paypal.me/pl1992aw
Updated to work with MIUI 12~13 or Android 11~12.0/12.1 custom ROMs
Unlock bootloader to do the followings.
Keep phone with more than 60% battery.
Section 2: Clean Flash custom ROMs
(Official Recovery ROMs can be flashed with same method)
Spoiler: Click to show
Make it simple using program mentioned in INDEX thread.
XiaomiADBFastbootTools (Java)
https://github.com/Szaki/XiaomiADBFastbootTools
If you don't trust the tools or link below,
upload files to Virus Total
or turn on Antivirus
or do manual way urbanman2004 written.
1. Download here:
https://androidfilehost.com/?fid=8889791610682940341
Original github source: (not maintained anymore)
https://github.com/Szaki/XiaomiADBFastbootTools/releases
Spoiler
2. For this program to work, install Oracle Java or OpenJDK (Mentioned in Readme)
Spoiler
Here use Windows to as demo.
Oracle Java download here or here (Choose either one to install)
Spoiler
Double click and install that on your Windows.
3. Keep PC connected to internet, find XiaomiADBFastbootTools.jar downloaded and double click on it.
Spoiler
4. Will automatically download SDK Platform Tools.
5. Turn ON USB debugging in Developer options (access mentioned in Unlock bootloader step 5)
Spoiler
Logout Mi Account, Google, all accounts.
Remove all fingerprint, PIN, password, picture password.
Turn OFF Find My Device function.
Backup your data from your phone.
Click to expand...
Click to collapse
6. Connect phone to PC, swipe down notification on phone and tap MTP/ File transfers
Spoiler
Or
If it's your first time doing this, should see this screen. Choose "Always allow from this computer" and press OK.
7. Confirm on PC to see information of your device.
8. Find custom ROM and read all reply and original thread of the Custom ROM. Sometimes firmware requirement and updated info is in replies.
(Step 8, 9 and 12 and links are POCO X3 pro specific)
Click to expand...
Click to collapse
ArrowOS as example: Download on PC Official ArrowOS -vayu ROM for POCO X3 Pro [direct link here].
Check the date and version as well.
Spoiler
If phone is not on MIUI version for required firmware, do additional as spoiler:
Spoiler
Download on PC official MIUI Recovery ROM or MIUI by Xiaomi.eu ROM ZIP (2~6 GB) of POCO x3 pro.
EEA is official ROM
Xiaomi.eu is custom ROM
Click to expand...
Click to collapse
9. Download recovery TWRP from here by Nebrassy for POCO x3 pro.
10. On PC, press "Device" -> "Reboot to" -> "Fastboot"
Should see Fastboot on phone
Spoiler
11. Program on PC should jump to Fastboot tab
If it did not jump to that tab,
Spoiler
click on Fastboot tab and choose "Option" -> "Reload device"
Warning !!! Look at the Anti version:
This is important for Xiaomi/Redmi/Poco phones.
Spoiler: About Anti version
Only Official MIUI ROMs may have ARB index.
Customs ROMs should not have ARB index.
If your device is Anti version: 2,
1) you can flash Rom with Anti Roll Back (ARB) index: 3, 4, 5, 6... etc. and the Anti version will become 3, 4, 5, 6... etc.
2) you can flash Rom with ARB index 2, and the Anti version will remain 2.
3) you CANNOT flash Rom with ARB index 1. Don't use that ROM in anyway, flashing through custom recovery will likely brick your phone.
4) If ARB index is 0, that means no ARB of that ROM. It will not check or change your device Anti version.
Make sure look at ARB index of MIUI ROM and Anti version of your phone. I don't have your phone. You decide to flash.
How to check ROM ARB index is written in the Source.
Source:
https://www.xda-developers.com/xiaomi-anti-rollback-protection-brick-phone/
12. Assume confirm MIUI ROM safe from ARB, click
Choose
for Poco X3 pro.
Change next drop down menu to "recovery".
Do not choose wrong option, or may be in BIG trouble.
Press Flash Image (Some device cannot do this step, check at your device XDA tutorial)
Confirm at the Status " Writing 'recovery' Okay "
13. Boot to TWRP
Phone should boot into TWRP.
Spoiler
14. Copy or Drag MIUI and custom Rom zip into phone Download folder for easy finding.
If PC did not see any folders in your phone from "My Computer" or "This PC", use either options:
Spoiler: microSD card or USB OTG
Copy the ROM zip file in and [put microSD into / connect USB OTG to] your phone, then continue to step 15
Spoiler: ADB sideload
A)
B) Connect phone USB cable to PC.
C) On PC, navigate to folder C:\user\your user name\XiaomiADBFastbootTools\platform-tools\
D) Copy or drag the ROMs.zip files into the folder.
E) Hold keyboard Shift and mouse Right Click in the folder blank space, left click Open command window here
F) In the Command enter the following code in the command window:
adb sideload custom_ROM_name.zip
G) After it's done (shown on phone screen), skip to step 16
15. In TWRP on phone, tap Install
Spoiler
If Firmware did not meet needs of custom ROM, do additional in spoiler
Spoiler
Choose Download folder, or press Select Storage and choose microSD card or USB OTG where you put the ROM, then tap on MIUI ROM zip.
Swipe to confirm Flash
After it's done, press back.
In Download folder, or press Select Storage and choose microSD card or USB OTG where you put the ROM, tap on custom ROM zip.
Swipe to confirm Flash
Wait until it's done
16. Press back, back, until you see Wipe, tap it and then tap Format Data.
Type yes, press enter.
17. Press Reboot System. Wait for like 10~15 minutes until initialization setup shows.
## End of Clean Custom Rom flashing.
Dirty Flash / ROM update
Do this only when developer or users said it can.
Spoiler: Click to show
Spoiler: If using Magisk, do this as well
First disable all Magisk module and reboot to prevent issues.
α) Remove ALL fingerprint, PIN, password, picture password, ALL locks
β) Do Section 2 step 15 with the update custom ROM zip file in your phone storage.
If TWRP or OrangeFox cannot see any folders in your phone, use either options:
Spoiler: microSD card or USB OTG
Copy the ROM zip file in and [put microSD into / connect USB OTG to] your phone and do Section 2 step 15 with the update custom ROM zip file, then do step γ
Spoiler: ADB sideload
A)
B) Connect phone USB cable to PC.
C) On PC, navigate to folder C:\user\your user name\XiaomiADBFastbootTools\platform-tools\
D) Copy or drag the ROMs.zip files into the folder.
E) Hold keyboard Shift and mouse Right Click in the folder blank space, left click Open command window here
F) In the Command enter the following code in the command window:
adb sideload custom_ROM_name.zip
G) After it's done (shown on phone screen), continue step γ
γ) When done, do the following:
δ) Then Reboot System.
## End of Dirty flashing.
Donate if you find it helpful: paypal.me/pl1992aw
Unlock bootloader to do the followings.
Keep phone with more than 60% battery.
Section 3: Install Magisk (Root)
Install steps and methods were written by topjohnwu (Magisk author) here, but still putting picture guide for POCO X3 Pro.
Spoiler: Click to show
1. Download Magisk on you phone, click and install.
Spoiler
Or find this and tap it once
A) the Easy traditional custom recoveries way :
(PC/Computer is not needed)
Spoiler
2A. Rename the downloaded APK file extension to ZIP.
Magisk-vXX.X.apk
↓
Magisk-vXX.X.zip
Click to expand...
Click to collapse
3A. Reboot to custom recoveries (TWRP, OrangeFox, etc)
3A-α) manually
Spoiler
Power off your phone, wait until screen turns black,
press and hold Vol+ and Power button Together (most Xiaomi/Redmi/Poco phones) until screen turns on.
(Picture from GSMarena)
keep holding Vol+ button, release Power button until booted into recovery.
3A-β) or with PC program/command
Spoiler
4A. In custom recovery on phone, tap Install
Spoiler
5A. In Download folder, tap on Magisk-vXX.X.zip.
Swipe to confirm Flash
Wait until it's done
6A. Wipe cache/dalvik
Then Reboot System
B) the Pro Patch image way :
(PC/Computer used)
Spoiler
2B. Choose boot.img and extract from custom Rom/MIUI Rom on PC which match current phone OS.
Connect phone to PC and copy that boot.img into phone Download folder.
3B. In Magisk app, click Install. Select and Patch a file.
Spoiler
4B. Copy the patched file to PC somewhere easy to find.
5B. Open PC program XiaomiADBFastbootTools
1) Select image magisk_patched-*****_*****.img
2) confirm selecting the patched image file name
3) choose boot partition in next drop down menu
4) Flash Image into boot partition, Yes.
Wait for "Writing 'boot' OKAY"
6B. Reboot to system
7. Go into Magisk app and check if it's installed.
Spoiler
8. Voila... or can do something more (Didn't feel the difference, though it said Recommended)
9. Reboot. Voila! Enjoy Magisk
##End of Magisk (Root) installation.
Section 3.5: Update Magisk
For Poco X3 Pro, repeat Section 3.
Donate if you find it helpful: paypal.me/pl1992aw
Reserved... Maybe for troubleshoot
Q. Why not use Mi-Flash?
A. Because one may easily accidently Clean All and Lock with different region MIUI and brick the device.
Go Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 and see how many users brick their device using Mi-Flash.
Be sure to check ARB index of MIUI.
Q. Why flash MIUI with TWRP not Fastboot?
A. To check you actually had unlocked bootloader. Without unlocked bootloader, you shouldn't be able to boot into TWRP.
Q. Widevine issues?
A. Read threads in spoiler:
Spoiler
You can have Widevine L1 on custom Roms.
https://forum.xda-developers.com/t/4267263/page-2#post-84919939
You can lost Widevine L1 on official MIUI Roms even without unlocking or root.
https://forum.xda-developers.com/t/4281695/
Devices supporting Widevine L1 certificate renewal officially:
POCO X3 Pro (vayu) [Stable V12.5.1.0.RJUMIXM+]
* Cetain devices have been losing Widevine L1 certificate randomly. The reason is unknown to us.
* Certificate renewal is done via Settings -> Passwords & security -> Fingerprint unlock -> Fingerprint payments -> Widevine (L1)
https://xiaomi.eu/community/threads/info-widevine-l1-support.61064/
If your device haven't officially receive MIUI update to 12.5.1.0, try Xiaomi.eu
Read also:
https://xiaomi.eu/community/threads/info-widevine-l1-support.61064/#post-606155
Thanks for your efforts bro..
i just unlocked the bootloader of my poco x3 pro 6/128 global stable(VAYU) and tired to root it with Magisk method before that i found a patched file of boot image from a post and i just directly did the flashing now its stuck in the MIUI logo dont know what to do next anyone can help me out with this,,, and im going to attached the boot image aswell try to look at it if its fine and what should i do next.
Faysal_khan_070 said:
i just unlocked the bootloader of my poco x3 pro 6/128 global stable(VAYU) and tired to root it with Magisk method before that i found a patched file of boot image from a post and i just directly did the flashing now its stuck in the MIUI logo dont know what to do next anyone can help me out with this,,, and im going to attached the boot image aswell try to look at it if its fine and what should i do next.
Click to expand...
Click to collapse
Are you sure your phone is Global? Which country?
What version of MIUI?
How did you flash your boot image?
What partition did you flash the boot image into?
Were you using this one? If yes, flash the boot.img from here into your phone boot partition and see if your phone can boot up.
Boot your phone into Fastboot or TWRP. If you can, there's still hope. Do the step in above Unlock bootloader step 18.
pl1992aw said:
Are you sure your phone is Global? Which country?
What version of MIUI?
How did you flash your boot image?
What partition did you flash the boot image into?
Were you using this one? If yes, flash the boot.img from here into your phone boot partition and see if your phone can boot up.
Boot your phone into Fastboot or TWRP. If you can, there's still hope. Do the step in above Unlock bootloader step 18.
Click to expand...
Click to collapse
YES, im dam sure its GLOBAL and im from Pakistan.
it was the MIUI 12.0.4 BUT Before unlocking it i updated to MIUI 12.0.6
ok so i just followed the MAGISK method and i downloaded a patched file from a post now i don't know where to find that post but it was for the MIUI 12.0.6 so i started to flash it through fastboot mode with a PC and i was done with it but when i pass on the command to reboot my phone it took so much time and then i released that it was stuck there in the LOGO . now im downloading the full ROM of miui 12.0.6(fasboot) to see if i can patch the boot image from there and hope it work.
Faysal_khan_070 said:
YES, im dam sure its GLOBAL and im from Pakistan.
it was the MIUI 12.0.4 BUT Before unlocking it i updated to MIUI 12.0.6
ok so i just followed the MAGISK method and i downloaded a patched file from a post now i don't know where to find that post but it was for the MIUI 12.0.6 so i started to flash it through fastboot mode with a PC and i was done with it but when i pass on the command to reboot my phone it took so much time and then i released that it was stuck there in the LOGO . now im downloading the full ROM of miui 12.0.6(fasboot) to see if i can patch the boot image from there and hope it work.
Click to expand...
Click to collapse
How you going to patch boot image if you cannot get into MIUI and use Magisk to patch boot.img?
You will need another phone to do that though.
Safe way is to do a complete clean data format and flash MIUI Rom.
i have another phone to patch it but the problem is what version should be used for patching magisk 22 or the latest one? how to flash miui rom and can i now go back to miui 12.0.4?
pl1992aw said:
Are you sure your phone is Global? Which country?
What version of MIUI?
How did you flash your boot image?
What partition did you flash the boot image into?
Were you using this one? If yes, flash the boot.img from here into your phone boot partition and see if your phone can boot up.
Boot your phone into Fastboot or TWRP. If you can, there's still hope. Do the step in above Unlock bootloader step 18.
Click to expand...
Click to collapse
i flashed the boot image from this attachment and its still stuck in there.
Faysal_khan_070 said:
i have another phone to patch it but the problem is what version should be used for patching magisk 22 or the latest one? how to flash miui rom and can i now go back to miui 12.0.4?
Click to expand...
Click to collapse
Now my suggestion is to do a Clean complete Rom install. So all your data and files will be gone.
If you agree to clean all your data, follow above Clean Flash custom ROMs. Start from step 8. When you need to get into Fastboot, do it manually.
You don't need to download ArrowOS. Download MIUI 12.0.6.0 Recovery Rom and flash through TWRP.
Don't think of Magisk and MIUI 12.0.4.0 just yet. First get back to be able to see MIUI working.
Do I have to keep a SIM card in the phone throughout the entire unlock process? I would be taking it out of my actual daily driver phone so I'm just curious
spookykidmm said:
Do I have to keep a SIM card in the phone throughout the entire unlock process? I would be taking it out of my actual daily driver phone so I'm just curious
Click to expand...
Click to collapse
You don't have to keep that SIM card after you done Unlock bootloader step 6.
You can remove your SIM card once step 6 was done. But you still need to have the number accessible to receive SMS if Mi-Account ask for verification.
Did you lose anything by unlocking bootloader? Like Widevine or something. Also, any special partition or file one should backup before unlocking (Not counting user data)? In Sony phones user have to backup TA partition or they will lose some features.
Thanks in advance
Rapier- said:
Did you lose anything by unlocking bootloader? Like Widevine or something. Also, any special partition or file one should backup before unlocking (Not counting user data)? In Sony phones user have to backup TA partition or they will lose some features.
Thanks in advance
Click to expand...
Click to collapse
Loss from Unlocking bootloader is written in above tutorial.
Partition backup is generally not needed if you do things correctly. For now, even if you have full backup of qcn, maybe can't even restore.
Read here: https://forum.xda-developers.com/t/4276823/post-85014473
Widevine issue, Read both:
You can have Widevine L1 on custom Roms.
https://forum.xda-developers.com/t/4267263/page-2#post-84919939
You can lost Widevine L1 on official MIUI Roms even without unlocking or root.
https://forum.xda-developers.com/t/4281695/
How can I use the Xiaomi Unlock tool on GNU/Linux? I tried using Wine, but I cannot log in.
wertguygywe said:
How can I use the Xiaomi Unlock tool on GNU/Linux? I tried using Wine, but I cannot log in.
Click to expand...
Click to collapse
Third party unlock tools that claim works on Linux and Mac. Trust it or not is your decision, can't tell you about it since it's 3rd party. Didn't use it before.
[TOOL][WIN/LIN/MAC] MiUnlockTool - Unlock bootloader of xiaomi devices on mac & linux
[TOOL][WIN/LIN/MAC] MiUnlockTool - Unlock bootloader of xiaomi devices on mac & linux Ciao xda users, I'm here to introduce a new tool of mine, MiUnlockTool. MiUnlockTool is an unofficial tool used to unlock bootloader on Xiaomi devices. This...
forum.xda-developers.com
Or find a Windows PC.
Or find USB drive and make a Windows To Go bootable disk. With this, you can boot from USB that contains Windows inside while not removing your Linux and MacOS.
Xiaomi Unlock tool (provided by Xiaomi officially) had only designed for Windows.
I have the latest arrow os on poco x3 pro now. But magisk failed to be installed.
It rebooted fastboot mode repeatedly after flashing magisk_patched_[random_strings].img.
If I flash original boot.img, it can be rebooted to system.
Below are some error in magisk install log I think:
cp: can't preserve ownership of 'busybox': Operation not permitted
cp: can't preserve ownership of 'magisk32': Operation not permitted
cp: can't preserve ownership of 'magisk64': Operation not permitted
cp: can't preserve ownership of 'magiskboot': Operation not permitted
cp: can't preserve ownership of 'magiskinit': Operation not permitted
This does not work due to a bad Java dependency. @
pl1992aw