[Cover] Custom Nokia 8 XDA Cover for 3D-printing - Nokia 8 Accessories

Since the official Nokia 8 covers still aren't available anywhere..
I made a custom cover, printed it and now optimized it further.
The cover is available in 3D-Printable STL format.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please leave a thanks if you like it.
enjoy.

What scanner did you use to capture and what material to make ?
Looks awsome, too bad I dont have that phone

ZooBaAr said:
What scanner did you use to capture and what material to make ?
Looks awsome, too bad I dont have that phone
Click to expand...
Click to collapse
no scanner. just a caliper.
to create the 3d-models of the phone and cover, i used solidworks 2017.
i printed it with a objet 30 pro and the material was verowhite.
will print it in veroclear too and show pictures later.
material thickness i used 1.4mm (i can adjust this if needed for other printers).
if someone else prints it with different printers, please show pictures and report about stability.

I like the cover. How did you make a physical copy of it? xD
Well this means u can even customized other stuff such as maybe adding graphics or writing names?
Pardon me cause i have no idea how u do what u did xD

Thanks for that.. I'm going to print it now on an Anet A8 I'll let you know how it comes out..
Ill probably try PLA and some cheap TPU I have.

Awesome, thanks for the sharing, shall try the print on an M3D micro and see how it goes.

Hey, first of all thanks for a awesome cover model.
Too bad it is reeeeeally painful to print. :crying:
My printer is now starting to print it for the sixth time. So far this one is the best try (now at 7%).
I am printing it on its back to get nice flat surface on the outside without need for any support (so I hope).
I couldn't get the print start nicely for the first five prints and I thought it was because my filament was not suitable for any reason or the setting didn't were off. I am printing with eSun Luminous GreenPLA.
I tinkered with speeds and stuff and managed to get that first layer to stick really nice. But once it started to do second layer prints started to string and did not stick.
That's when I started to take a better look at the model itself after slicing. And I found the problem, after the first layer (note that I am printing at 0.15mm layer height) second layer starts printing its exterior lines on basicly nothing and this goes for first 0.45mm. After that the model is pretty much fine and does print on last layer, but I still see some similar problems, but I think it should still work.
To solve this problem I tried and cut first 0.45mm from the model leaving back thickness still somewhere around 1.5mm or so. It should work.
Now printer is doing its job steadily and so far so good, 10% done.
Ill post again when I know how this works

Related

VIDEO: Form-fitting black Silicon Case for HTC Desire - $10 - Amzer

Overall this is really great. I ordered it the day after I got my Desire, but it took 2 weeks just for it to get into production, and then another week to ship. It comes in a bunch of colors; I chose black. The fit is perfect, and all the buttons and holes line up just right. My only complaint is that I wish it were just a bit more stretchy-snug -- It's snug, but I'd like for it to have been more snug
.
ALSO:
It did not come with a carry strap, nor anchor point for one, but I made one myself and now it is secure in my hands everywhere I go. Mission accomplished. I will add pictures of that later tonight.
.
What are the white things stuck on the back of the phone?
al89nut said:
What are the white things stuck on the back of the phone?
Click to expand...
Click to collapse
Oh sorry, I forgot to mention that.... They have nothing to do with the silicone case... They are separate stick ons called "egrips" -- which you can apply to any device and it creates a friction that prevents stuff from sliding out of your hand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Prior to getting the silicone case in the mail, I needed to give myself some peace of mind to not let the Desire slip out of my hand. egrips are great... They makes them as strips you can apply where you like -- and they also make they as custom fits for an entire back of a phone...
I care a lot about aestehtics -- but I do not care about the back of my phone. I rank "NOT DROPPING MY PHONE" much much higher than "neat and tidy back side".
But, for the record, the egrips work great on the Desire back surface itself... But when I then applied them to the back of the silicon case, they don't adhere.
So, what do you think of the case?
Great video, thanks for the great review!
I wish everyone would review the products they bought the same way, with clean and alot of photos, detailed ones

acer s200 touch syntetizer (the clear plastic over the lcd)

Hi i have to change the touch panel due to a big scratch,anyone here know if i have to disassembly all the phone?Or else someone with a service manual?
My phone was out in the rain for a bit so my digitizer is all messed up. Only thing I can do is touch the bottons on bottom. Not much function in the touchscreen besides that. Have ordered a new digitizer and will hopefully get it by the weekend or next week. Can report back how it goes with the disassembly or have you already done yours? Please give a report on how to do it if that's the case.
I m still waiting for mine from hong kong.look s like someone else had changed the syntetizer in the forum,but i had no reply to my question
Ok. I guess we'll have to wait and see who gets his first. Whoever does though it would be nice with a report on how it went.
Hi i ve received the touch panel,but i tried to disassembly the phone,but i can not get the cover to open.I unscrewed the 5 screws on the rear but the cover is as strong as before.Have you ever tried to disassembly our phone?
And the touchscreen i received it s not the new one but the old engineering example,i think it s the same but i want to try the respone so i can give the seller the positive or negative feedback.The panel differ from the classic one for the acer logo on top right,not at the bottom center,and...there is the trasparent hole near the headphone for the front camera as you can see from this old sample picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And this is mine
I read in the screen replacement forum. There are two more screws at the left and right sides of battery house.
Hope that helps. The guy in hongkong that sent me the digitizer sent it by registered air mail first but sent another one by EMS so hopefully i'll have it this week.
Ok i ve found the way by myself,it s not so difficult,i ve seen the two screws after...You have only to pay attenction to not force too much the plastics when you try to open the cover and when you try to detach the touch panel.The best way is to use a guitar plectrum and start to open from the bottom right,for the touch you have to go carefully.Now i ask in the forum if they need a guide with high res photos,because i ve taked pictures with my nokia n95
Well I would be really interested in seeing the pictures. Please do share. How's the new touchscreen working out ?
You can see my guide in the general section,maybe will be sticked.The panel is working good,but it seems a little less sensitive than the official oem one.Maybe the engineering sample is a little different.In plus the light from the touch keys is not diffused good,and i have an hole for the front camera,wich is not present in retail s200.But if you go to the guide you can see pictures
I have now changed my digitizer and thanks to your guide it went pretty smooth. Was done in about 10-15 mins. I got the oem one but the buttons on the bottom is diffuse as you said yours was. maybe i can move the white from the old one to make it nices. Probably won't bother though. Don't really find a difference in response from before the change.

[Q] DHD Case Advice

Hi everyone,
i am expecting my DHD to be shipped on Monday (hopefully )
so instead of waiting restlessly in front of my computer screen i decided to design my own case for the DHD since most online cases don't fit my taste.
as of now i've made the first prototype design and would like to ask you for general advice and help.
my two questions are as follows:
1. since i do not have the device at hand i don't know the exact dimensions so could anyone tell me (based on the pics) if you think the prototypes are of the right size?
2. i am not sure which design to go for, could you tell me which do you think looks best and the criteria on which you based your opinion?
thanks
note about the pics: i also included pics of a smaller card holder which i had previously made to show how the laser engraving actually looks like (i think this time the laser strength was too powerful as it cut through the material xD) and how the thread is supposed to look like (i made the android one in a hurry as i had to finish an essay before i could go out xD)
also, my favourite atm is the androids design but the wax which i tried melting on it seemed to make it look worse than i thought it would, probably cos the laser cut out too much xD, so i would also like to ask you, do you think i should make the background androids larger to increase detail or do they look ok that way?
heh another note: TEKBOI/ TEK301 is my usual nickname, that's why i engraved it
finally, the case prototypes , i hope you like them
EDIT: Thanks apprentice for letting me know about the pics :/ i think they should work now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your images just won't download, so can't advise.
apprentice said:
Your images just won't download, so can't advise.
Click to expand...
Click to collapse
are they visible now?
tomorrow i should have time to cut out another case but i'm not sure if i should keep the same design or not, i am not sure wether to blame to intricate design of the androids or the higher laser setting, i'll trychanging both probably xD
wow. they are amazing! i prefer the simpler design, but both are very cool.
I actually remade the Android one but enlarged the background androids this time. I attached a pic I just took with the dhd cos I'm not home. Once I got the phone I made a smaller design as this one is slightly too big and I also changed the Android sizes again. I haven't had time to go cut it yet though :/
Thanks btw xD
Sent from my Desire HD using XDA App

Homemade SPen holder out of old pen - my results

Hi all,
I was looking for a replacement Spen for my Note 8 but couldn't find any good (mostly the offset was unacceptable). Then I found a video where some guy (I can't find the video right now. If you know it please post a link and I will add it here) had a great idea of putting Note's 3 Spen inside old ordinary Uniball pen. With that in mind I bought Note's 3 Spen and found few old pens laying around in my office.
Three hours of work and this is what I got:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What I used:
1 x Old BIC pen
1 x PCB push button
1 x Note 3 Spen
some isolation tape
some paper
some plastic part that I used as a distance inside the pen (Spen was shorter than BIC pen)
Things to keep in mind:
Be careful for your stylus! Mine got stuck twice and getting it out was pretty tricky.
Use your tools wisely. You don't want to brake the Spen or cut/puncture your own hand!
I was successful doing this homemade "spen holder" but I am not responsible for any damage or problems that may arise when you try to do something similar. Always use your brain and be sure you have enough knowledge before you start to work.
I thought one might use this idea if you need accurate and nice stylus in "full" size.
PS
One can of course close the pen and then it looks just like ordinary one. The blue tape is just for my information that this one is actually Spen as I am using identical pen for normal paper writing and drawing
Impressive work, love DIY projects
Nice project and very good idea, i will defiantly try something similar because i got used to write a lot on my note 8.0 and spen is not that comfortable for longer usage.
why cant i think of this... good idea my friend... going to get one... hahaha... kind of tired writing with the current spen... going to use the old note 1 spen to try modding the pen...
what's the PCB button for? to activate the s-pen button?

Case + Notebook + Pen Slot?

Did a quick search and didn't find what I was looking for.
I'm in the Navy and I keep PDFs of all important instructions on my Note 8. I use it all the time at work. I go to a lot of meetings and take notes on a regular 5.5 x 8 inch notepad, I have sticky notes, highliters, and an assortment of pens with me. Im looking for a case that will hold my Note 8 on one side, my notepad on the other side, ans still have slots for pens.
When I first got this I ordered what I thought was exactly what I described above on Amazon. When I got it, turns out the dimensions weren't exactly accurate . It's simply too big to walk around with all day. It's more of what I'd picture an art student would carry around.
I'm looking for something compact, not much bigger than the Tablet itself but with room on the opposite side for a notepad and slots for pens.
Im kicking around a few ideas on Amazon but im afraid to order without the opinion of someone who owns and uses one with the Note 8, in fear of another poor purchase.
Thanks everyone!!
I've been using one of the green "leader book" holders from Rite in the Rain for a little while now; item number C9200A. It's not perfect, and I haven't figured out a way to keep the Note 8 really secured in the binder itself, but there are several pen slots which are big enough to hold a highligher/sharpie/etc, and a few other slots and pockets for smart cards or anything else. And the dimensions are perfect for holding the tablet.
The ones we get from supply (I'm Army btw), come with a packet of inserts that has graphed notebook paper, and fillable pages for things like a 9-line MEDEVAC request, call for fire request, unexploded ordinance, and others. Some of it might be Army specific, but I'm sure you could find it useful too
Anyway, I've been in the same boat as you for awhile, and besides finding some "tactical" (lol) iPad Mini cases/binders, I haven't been able to find much. Let me know if you find something better!
http://www.amazon.com/rooCASE-Samsu...&sr=8-2&keywords=galaxy+note+8+case+executive
This is one other I was looking at, but it doesn't look like it has any room for a notebook. We don't have a supply! But I'll look into what you posted and keep on looking for something. Right now I got a nylon foldable case from the Chaplains that's working well, but having the same problem as the tablet not being totally secure.
Also, it's big!
Thanks for the input!
I use this one. I don't use the planner, but the notepad on top. I then insert the tablet into the pouch below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(not red, but brown)
thanks
ehy thanks !

Categories

Resources