Hey Guys,
As we all know, our Zenfone 2 has a slightly different method for installing Magisk. It is often confusing to install Magisk Properly and there is sheer lack of proper guides and support for the same for our device.
I was recently looking to install magisk in order to get banking apps to work on my device and also get the play store device status to "Certified".
My Device is as follows:
Device: Asus Zenfone 2 | ZE551ML | 4GB RAM | 32 GB ROM
ROM: Lineage 14.1 Last Official Build and January 2019 Gapps (from openGapps)
Xposed: NO
Any other root modifications: NO
Now, you might be wondering what is the need of this guide.
Firstly, there are no threads that point to the procedure for installing latest Magisk (i.e. 18 and 18.1) for our devices.
I found it depressing taht we only had threads for Magisk 16 and 17.1 and none after that.
Secondly, the method i am going to show you, will work on all future versions of magisk. All very easily.
Thus this eliminates the need for multiple magisk version threads.
I would like to request you guys to report as and when a newer magisk version is released to report whether the method still works. So that we know this is still useful.
So lets start with the procedure:
1. A clean ROM is recommended without any modifications. Else all the effort would go waste if the CTS Test fails eventually.
So, backup your important stuff, format system, data, cache partitions in TWRP and clean flash your ROM of choice along with Gapps
2. Download Magisk from the Official Thread linked Here.
3. Download VerifiedBootsigner v8 from Here. This is designed by the Legendary Chainfire , the brains behind the legendary SuperSU.
4. I would recommed you to finish the setup of your device. i,e, ROM + Gapps first.
Then Reboot into recovery and flash Magisk zip downloaded from the link above in step 2.
5. After flashing Magisk, flash the VerifiedBootSigner v8 downloaded from the link above in step 3.
6. After successful flashing, reboot your Device and open Magisk Manager from the drawer. and Check your safetynet status.
7. You will get 2 green tics.
SUCCESS!
XDA:DevDB Information
Magisk Guide for Zenfone 2 (x86 Devices), App for all devices (see above for details)
Contributors
[email protected]
Version Information
Status: Stable
Created 2019-02-05
Last Updated 2019-02-05
thread closed as duplicate of https://forum.xda-developers.com/android/apps-games/magisk-versions-asus-zenfone-2-x86-t3897181
Hey Guys, after about 16 Hours of doing a few tests after Netflix mysteriously showed up in my Playstore on my Rooted S9, I have concluded that there's a strange interference that has something to do with theming a Device and Netflix's Bootloader check.
Currently I have confirmed it working on 2 devices, a Samsung Galaxy S9 (Exynos) and a Huawei P9. Both of these devices have Magisk 19.4 and Widevine L3. I did not install any magisk modules that could interfere with my tests such as Liboemcrypt Disabler.
Here the Steps I took:
1. Install a theming app that works (On my ROMs the only working theming app is swift installer, so If you own the APP or get it from some dark corner of the interwebs, you can follow my steps 1:1, if you only have a substratum theme that's working for you you can try using it, too, and post your results)
2. Theme every app (YOU NEED TO THEME THE PLAYSTORE AND PLAY SERVICES)
3. Let it reboot your phone so that the themes can work (In the case of Swift Installer, it will ask you to reboot 2 times)
4. Force Close the Playstore and clear all Playstore Data (OPTIONAL: Clear Play Services Cache)
5. Open Playstore and search for Netflix (If it says it's unable to install netflix, revert the Theming and do all steps again)
Regardless if it does or doesn't work for you, please post your device and optionally the Step you got stuck at. In the meantime, I will try to find out what actually causes Netflix to show up after theming your phone.
TESTED AND CONFIRMED DEVICES:
Samsung Galaxy S9 (Exynos) - LOS 15.1 - Magisk 19.4 - Swift Installer
Huawei P9 (AL10) - LOS 15.1 - Magisk 19.4 - Swift Installer
Reserved
PwizzROM-j7 NXT
TESTERS PLEASE
debloated OneUI
based on j701f
Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
Installation
1. Wipe caches, data, system and vendor
2. Install ROM
3. Install dmverity
4. Reboot to recovery
5. Reboot
Note:
This ROM contains everything I like.
If you want something else, I can show you how to build your own.
@physwizz
ROM
Work in Progress
Source
Download Galaxy J7 Core SM-J701F (INS) J701FDDUACUG2 in Samfw - Samsung firmware download
Galaxy J7 Core SM-J701F (INS - India) J701FDDUACUG2 Pie(Android 9) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
physwizz collection
A collection of guides, kernels and ROMs. Guides Complete Guide to the A20 GSIs for the A20 Quick Root and TWRP for the A20 Making my First Kernel for the A20 A20 Rooting Guide Making Your Own ROM Making Your Own Version of QwizzROM-a20...
forum.xda-developers.com
Please I want pictures of this ROM
not work
hanynoshy said:
not work
Click to expand...
Click to collapse
Ok
Thanks for testing
Finally, I just found a custom recovery that is work for SM G9250, It is from a chinese website, I translated it and i want to share with you all,
this TWRP RECOVERY WORKS on these devices;
Samsung Galaxy S6 edge (HK)
Samsung Galaxy S6 edge (CN)
Here is the download link (100% Working) (package 3.0) :
(https://www.mediafire.com/file/ato69szuop6co5j/G9250+TWRP+Package+3.0.zip/file)
Beta channel (Package 3.1 beta):
(https://www.mediafire.com/file/nt82oquqittb1eh/G9250+TWRP+Package+3.1+(BETA).zip/file)
Hope You guys love it!!! it fully works on my (G9250 HK VERSION OF S6 EDGE)
This is a twrp package that made by me lol
originally it used baidu to download lol
Notes:
Package 1 (2021/12/20)18:30:
*TWRP 2.8.7.0 image with it
Package 1.5 (2021/12/24)HK 15:34:
*added Odin 3
*Fixed TWRP IMAGE not working
*fixed zip cannot be open
Package 2.0 (2021/12/30)HK 1:00:
*Added Twrp 3.2 Update (img file by umbrellaus)
*Added Samsung Driver download link
*Added download link from Google drive
Package 2.1 beta (2021/12/31) HK 13:30:
*removed broken samsung driver download link
*Added G9250 firmware download link
*Beta is avaliable now!
Package 3.0 (2022/01/06) :
*Fixed the download link
Package 3.1 beta (2022/01/07) :
*fixed errors
[Final] Package 4.0 :
Planed release in 2022 02/01
the twrp image is not made by me, I just sharing with you, here is the original poster:
三星_免费高速下载|百度网盘-分享无限制
百度网盘为您提供文件的网络备份、同步和分享服务。空间大、速度快、安全稳固，支持教育网加速，支持手机端。注册使用百度网盘即可享受免费存储空间
pan.baidu.com
thanks!!! I have tried many TWRP version for my s6 edge (SM-G9250) but it is only one I can use. the image which download In TWRP official website made "Recovery Is Not Seandroid Enforcing" wrong.
howerl said:
thanks!!! I have tried many TWRP version for my s6 edge (SM-G9250) but it is only one I can use. the image which download In TWRP official website made "Recovery Is Not Seandroid Enforcing" wrong.
Click to expand...
Click to collapse
no problem!
S908B & S908E system-rw Dr.Ketan ROM
Supported device : S918B & S908E/N for Full ROM, All rootable variants for Magisk Module
We do support usually 2-3 years since device launched, but yet no guarantee, We may drop support for any device / any variant/s anytime without any prior notice.
ROM Features
ROM Features varies with version of ROM. For more details, read changelog post. Link available in post #3 for changelog of all versions.
Must read changelog for a version you are going to install, it will have latest information about features, changes, known bug list/fix and Installation guide of respective version.
There are two types of ROM available since OneUI 5.0
1.Full system-rw ROM : Full ROM includes super.img with system-rw capabilities + stock enforcing kernel + ROM Control & Modification
Supported device : S908B & S908E
2.Magisk ROM Module and here explained in details how it is different from full ROM
Supported device : All S22 variants
Credit and Thanks :
@Chainfire - Respected elite developer for supersu and his unbelievable contribution to XDA/Android community. @wanam - Respected elite developer for his awesome contribution and references to his works.
@topjohnwu for Magisk
@xperiacle the amazing developer for reference to his work and tools. @amarullz for aroma installer. @gharrington for 3minit battery and QuickLaunch.
ROM Control source and all credit and thanks goes to @daxgirl and @Wuby986 for their open source project for RomControl.
@AbrahamGC for some ideas samsungvn htcmania & 4PDA for tips and some stock apks.
AbrahamGC and Anan1211 for Secure folder and s-health A12 ianmacd for TWRP @afaneh92 for TWRP, system/vendor rw scripts and modules. @Arteush for bluetooth fix (losing BT pair on reboot) on Android Q, aka_vkl for Dolby digital, kdrag0n for SafetyNet fix @Winb33 for custom font pack. HuskyDG for Bootloop Protector magisk module. MrWeahere for CRB Kitchen
XDA devDB InformationS908 I Dr.Ketan ROM , ROM for the Samsung Galaxy S22 Ultra
Contributors
Dr.Ketan
ROM OS Version: Android 12
ROM Kernel: Stock (pre-rooted). Source code (samsung) here
ROM Firmware Required: Stock Samsung specified version
Version Information
Status: Stable
Created 2022-03-12
Installation, Important Infos & Download
Installation : State of the art Installation procedure.
Detailed installation guide separately available in download area along with ROM files for Full ROM and for magisk module read changelog post.
WARNING
Before you root your device you must be aware that
This will void warranty.
As of now you will lose Samsung Pay and Samsung Pass forever if you root once, even unrooting won't help.
There are many features stop working when you unlock bootloader other than S pay/Pass like Samsung Health, Secure Folder, Galaxy Watch pairing issue, Issue connecting old gear watch (S3 or earlier), Google Pay etc but ROM is patched for all these mentioned features. Still you may trouble using some bank apps and these may fixed by adding these apps to Magisk Hide
There may be some knox features there which you may not able to use but I can't list those as I never used. Just Google It
Patched featurs are working today when writing this, No idea if it may stop working next moment/tomorrow or later
Also to note, once you root, you can't go back to "pre-rooted" state completely. It is one way!
OTA won't work once you root device.
ROOT with caution.
You can unroot & Relock bootloader after flashing stock firmware, but still your warranty flag remain 0x1 and most of countries it still voids warranty. Also after unrooting & relocking bootloader, some knox features never work again.
ROM Tool permission : Files & media - To save and read files, Calendar - Tool needs some time monitoring to avoid using RT immediately after reboot. Special access for accessibility service - Since Android 12 it requires for QS panel custom Toggl e.g. Reboot to recovery
Download : https://drketanrom.com/
ChangeLog for Magisk Module ROM
OneUI 4.0
Spoiler: ChangeLog OneUI 4.1
ChangeLog OneUI 4.1
- S01 - 12.03.2022
- S02 - 14.03.2022
- S03 - 19.03.2022 & S03.1 - 30.03.2022
- S04 - 06.04.2022
- S05 - 27.04.2022
- S06 - 27.05.2022
- S07 - 05.06.2022
- S08 - 18.06.2022
- S09 - 08.07.2022
- S10 - 05.08.2022
- S11 - 15.10.2022
OneUI 5.0
- T01 - 26.10.2022
- T02 - 19.11.2022
- T03 - 14.12.2022
- T04 - 15.01.2023
OneUI 5.1
- T05 - 17.02.2023
- T06 - 11.03.2023
- T07 - 14.04.2023
- T08 - 15.05.2023
- T09 - 20.06.2023
ChangeLog for Full System-RW ROM
OneUI 5.0
- T01 - 07.11.2022
- T02 - 20.11.2022
- T03 - 14.12.2022
- T04 - 17.01.2023
OneUI 5.1
- T05 - 17.02.2023
- T06 - 11.03.2023
- T07 - 11.04.2023
- T08 - 12.05.2023
- T09 - 21.06.2023
How to Root (currently non rooted device) with or without TWRP
Spoiler: Root existing non rooted device
Root with or Without TWRP
1.Root without TWRP :
Unlock Bootloader
You needs to download stock firmware (You can get stock firmware with Frija) and extract AP*.tar.md5 file and patch with magisk. Flash patched file with AP tab of Odin PS : In case root files without TWRP available in download area for your variant, you can use that for AP slot instead of Patching AP
put device in download mode and connect to PC and flash above files
Reboot to recovery and select to format data
Reboot to system → You will see Magisk stub in drawer → Update it. (In case stub not there, Donload magisk app from Download area and intall manually) → Open Magisk - It will ask to complete additionl setup, Let it do. → Reboot device. You are now ready to Intall Dr.Ketan ROM module. Move to next step.
2.Root with TWRP
Unlock Bootloader
Download TWRP, Patched vbmeta and Kernel and system-rw script zip from TWRP thread (Link below)
Select TWRP tar file with AP slot and Patched vbmeta for USERDATA slot of Odin PS : In case root files with TWRP available in download area for your variant, you can use that for AP slot. It contains both TWRP+patched vbmeta
Put device in download mode and connect to PC and flash above files
When Flashing completes, disconnect device and starightway reboot to TWRP
Run multidisabler from TWRP → Advanced → Terminal → and type : multidisabler (it may take few minutes, keep patience)
Wipe Data (Full wipe, that you needs to type YES to continue)
Reboot TWRP and now connect to PC and copy Custom kernel and flash from TWRP as zip
get Latest magisk apk and flash from TWRP
If you want to make system-rw, Get afaneh92_lp_rw_tool_v*.zip from TWRP thread and flash
Reboot device to system Update Magisk from stub if availble OR Install Magisk apk
Now ready to install Dr.Ketan Module, Follow XDA ROM Changelog post to install ROM Module
Thanks & Credit to Afaneh92 for TWRP & Kernel, below are link for OP Exynos and SnapDragon
PS : For detailed instructions about Magisk installation (root) read here. In case still you have question, move to Question forum of S22 section and ask for help. This thread is development thread and any questions related to how to root will be ignored.
How to Update Firmware and Keep root/twrp intact without losing data
PS : We highly recommend to make data backup before trying this as something went wrong and you may lose data.
Spoiler: Update Firmwre with Keeping Root/TWRP/data intact
Read below methods depending on you have root with or without TWRP
1.Rooted S908B/E/N/0 without TWRP
Unlock bootloader
You needs to download stock firmware you want to update (You can get stock firmware with Frija) and extract AP*.tar.md5 file and patch with magisk. Select Patched AP file for AP slot and BL*.tar.md5,CP_tar.md5,Home_CSC*tar.md5 for BL,CP and CSC slot accordingly. (PS : In case root files without TWRP available in download area for your variant, you can use that for AP slot instead of Patching AP, Importnt : Use Home_CSC*tar.md5 if you want to keep data. Selecting CSC*.tar.md5 will Wipe data autometiclly.)
Reboot device → You are now ready to Intall Dr.Ketan ROM module. Move to next step.
2.Rooted S908B/E/N/0 with TWRP
Download latest firmware as per pre-requisite
Disable Auto Reboot option in Odin
Select appropriate slot in Odin for BL,AP,CP and CSC (Using HOME_CSC will keep data, while using CSC* will format data) from stock firmware
Select TWRP file for USEDATA slot . File must include patched vbmeta file. If TWRP doesn't have patched vbmeta included, you have to make one yourself. To make TWRP+Patched vbmeta : Download both the files from TWRP thread and extract it to get recovery.img and vbmet.img. On your PC, select these two .img files and Rt click → select 7zip → Add to archieve → select archieve format "tar" → Select OK and this will create a tar file that have TWRP+Patched vbmeta. Use newly created tar file for Userdat slot of Odin. PS : Incase download area have Rootfiles with TWRP for your device then it contains everything TWRP+patched vbmeta + Kernel, extract zip to get all required files
When Flashing completes, disconnect device and starightway reboot to TWRP. Importnt : At this stage you should be quick to reboot to TWRP, If you flais and device tries to boot to system, you may have to wipe data.
Run multidisabler from TWRP → Advanced → Terminal → and type : multidisabler (it may take few minutes, keep patience)
Wipe Data (If you are already using Afaneh92's TWRP and used multidisabler + Format data, you can select to Factory Reset too (This will preserve media file) OR you can skip wipe option at all in case you want dirty Install.)
Reboot to TWRP In case you have wiped data.
Copy Kernel & Magisk apk/zip to device (Alternatively use USB storage)
Install kernel (Flash Kernel zip from TWRP)
Flash Magisk
If you want to make system-rw, Get afaneh92_lp_rw_tool_v*.zip from TWRP thread and flash
If you don't have magisk app in drawer (in case of clean install), Install manually.
Open Magisk app and complete setup if it asked for
PS : If you are on any other TWRP or Stock recovery, you must FORMAT DATA (That requires to type 'Yes' to confrm wipe)
Now ready to install Dr.Ketan Module, Follow XDA ROM Changelog post to install ROM Module
Thanks & Credit to Afaneh92 for TWRP & Kernel, below are link for OP Exynos and SnapDragon
PS : For detailed instructions about Magisk installation (root) read here. In case still you have question, move to Question forum of S22 section and ask for help. This thread is development thread and any questions related to how to root will be ignored.
Help & Support
We do support only ROM related queries here over XDA thread only, we do not have/encourage any private support over telegram or other media to support ROM related queries.
We do not answer any ROM related question over private chat.
If your queries doesn't have enough information, it will be ignored.
We recommend everyone to read OP,Changelog and Installation guide before you install ROM. If answer to your queries already there in OP, Changelog post or in Installation guide, it will be ignored
Any queries not reated to XDA ROM (e.g. TweaksPro) then you must seek help from developer over mail/privately. Here we discuss only XDA ROM related issue.
For reporting issue/bugs you must provide enough info as said below under "How to report bug/issue"
How to report bugs/Issue?
To report issue, you needs to provide following informations, else it will be ignored. Also if your query is already mentioned on OP/ChangeLogg post, it will be ignored.
1.ROM build number.
2.Dirty/Clean Install. - If you have dirty installed, Then first clean install and report if issue persists.
3.Bug/Issue appears right after installing or later?
4.How to reproduce error.
5.Is there any same reports there on thread on your searching?
6.Is there any mention about same bug on OP or changeLog post?
7.Logs - Attach logs here/Upload to other places where it can be downloaded without registration and doesn't have ad (we recommend dropbox/Gdrive) and post link.
Click to expand...
Click to collapse
Finally! After all the teasers and trailers ... We are getting into serious business !
THANK YOU
All the best and cheers Dr. !
ChangeLog S01
Based on S908EXXU1AVBF Android12 March 2022 security patch OneUI 4.1
ROM Tool on essential fix auto setup zygisk including SafetyNet fix (no needs to change any option manually)
Important Instructions for setting up ROM (NEW)
Prerequisite :
Must have installed firmware S908EXXU1AVBF S22 Ultra
Rooted device with Magisk (Zygisk) Intallled (Follow steps belo in case you have non rooted device)
How to Root device
Unlock bootloader
Download Root_files*.zip (available in download area) - Extract and Flash Root_Files_*.tar.md5 with Odin for AP tab
Reboot to recovery and select to format data (Factory reset option on stock recovery)
Reboot device → You will see Magisk stub in drawer → Update it. (In case stuf not there, Donload magisk app from Donload area and intall manually) → Open Magisk - It will ask to complete additionl setup, Let it do. → Reboot device. You are now ready to Intall Dr.Ketan ROM module. Move to next step.
How to Install Dr.Ketn ROM Module
Download DrKetan_ROM_S*_module.zip and copy to device, We recommend to check MD5 to rule out faulty download
Uninstall any other magisk module you have installed
Open Magisk app → Click on Module → Select Install from storage → Select Module file you have copied to device → Complete Intallation and reboot device
Setting up device first time after Module installation
Open ROM Tool, Apply essential fix and Reboot,
After reboot you can check SafetyNet and should be passed. You can use this app from playstore or This from Github to check SafetyNet
Now you can further setup ROM a per your liking. Also MagikHide is Configure Denylist now and available under Magisk Settings.
Since A12 Stable Magisk not working and new Magisk doesn't have buil-in Module repo, You can get standalone module manager from here For more details and queries about new magisk ref this
PS : Plz don't install any other mods for SafetyNet, All queries related to Magisk/SafetyNet will be ignored if already explained above
TweaksPro version requires 4.1.0 or up
ROM Features (XDA Version)
- Ad Free QS Panel Toggle
- Reboot to recovery QS Panel Toggle
- Native call recorder (Manual) While you are on call - click 3 dot - Record (Should work without CSC restriction)
- Auto Call recorder without CSC restriction (ROM Tool - Mods & Fix)
- High Volume warning disabled
- Pre fixed Titanium freezing while restoring apps
- Probable fix for Titanium Backup schedule
- Internet browser Secret mode
- S Health patch for using with rooted device.
- ROM Tool with following Options
AdFree mode Enable/Disable
Single click install/uninstall custom fonts (on the fly)
YouTube Vanced Installer (No xposed requires)
NonRoot - Requires MicroG to login
Root - Truely alternate to Youtube, Can login to youtube without MicroG (disable Play store update)
You have to click on NonRoot/Root depending on your choice, then you needs to click "Install" tab and latest version of Youtube vanced will get installed.
StatusBar Icons
Show/Hide stock battery
Show/Hide 3minit battery
show/hide stock clock
show/hide 3minit clock
ROM Control - See below
Mods & Fix
Auto Call Record
Titanium backup FC fix
Google Pay Fix
Added camera fix (Certain users reported camera failed issue. This is reported on stock too, here is someworkaroung meanwhile samsung fix it)
SafetyNet Fix
Samsung Health & Private share fix
Update & Fix
- ROM Control (systemUI preferences)
Battery Bar with thickness and color option
Virtual key on statusbar (Lt/Cinter/Rt)
Network meter with Toggle (Lt/Rt/Quick Panel/None) with color option
PS : There may be few more options in ROM control but won't work if those are not mentioned here.
Known Bug/Tips/Fix
3 minit users can use 3minit battery paid version for free. Check this (Thanks to gharrington )
Tips on TWRP and App Backup/Restore Read Here
Download : DrKetanROM.com
PS : This is a fully customized ROM and for end users only, ROM or any part of ROM not allowed to redistribute,modify or to use as base to prepare new ROM.
STATUS : Online
Haleluja, its here!! Great amazing work! OMG I'm so excited! Let's go!!
Thanks alot !!! Finally I can unpack my S22 Ultra ^^ and use it as real Phone
Proud to be the first worldwide to have a Custom ROM, FULL ROOT, Adblock etc on a S22 Ultra Exynos
Community LOVE for you!! ♥♥♥♥♥
EDIT: HERE IS THE GUIDE TO USE FOR EXYNOS (still testing)
Ok, so basically find and download the firmware (S908BXXU1AVC6 for EU - or ask me for the File..) to the phone eather with the Phone itself or trought USB-Cable, install magisk.apk from here, unpack the zip file from Firmware and patch the ap file via magisk, get the files to the pc and use odin to flash the patched Firmware.
of course unlock bootloader before and go to download mode.
Here is how to do that:
Guide to root Galaxy S22 Ultra (B/E/N/0), unlock bootloader and flash official firmware (noob friendly)
Your warranty is now void. If you root your device, Your KNOX status will be tripped. You can still pass the safety net after you root if you follow the instructions. Sorry for USA models, you can't root unless you can unlock your bootloader You...
forum.xda-developers.com
or
https://www.droidwin.com/how-to-unlock-bootloader-on-samsung-galaxy-s22-s22-plus-s22-ultra/
Then follow the other steps from Dr. Ketan
S01 Dr.Ketan Magisk ROM is Online now
Must read changelog above for Installation guide and other Info
Thank you for Support & Trust on this ROM.
no rom, only module
Yaiks. Hopefully it will be available for B variant
iampatricktan said:
Yaiks. Hopefully it will be available for B variant
Click to expand...
Click to collapse
You can try on exynos (only module, no root files). If it doesn't work then maximum you needs is to factory reset.
In that case I may consider to make separate rom
dr.ketan said:
You can try on exynos (only module, no root files). If it doesn't work then maximum you needs is to factory reset.
In that case I may consider to make separate rom
Click to expand...
Click to collapse
I think its much better to make separate only for Exnos variant? So that files for SD will not be included, correct me if I'm wrong about that. Also been using your ROM since my Note 9.
dr.ketan said:
S01 Dr.Ketan Magisk ROM is Online now
Must read changelog above for Installation guide and other Info
Thank you for Support & Trust on this ROM.
.
Click to expand...
Click to collapse
Huge thx my bro
ok, so great news, it works at least for exynos as well!
Safetynet also works!
Problems so far:
Can't change my keyboard - UI restarts
com.android.phone closes down
and it says system is unstable - please do a factory restore - on boot up.
But all in all it seems to work, with root etc.
Thx Dr My bro. Hopefully we can have the Exynos version seperatly if possible and not too much of your time consuming.
beautyangel said:
Thx Dr My bro. Hopefully we can have the Exynos version seperatly if possible and not too much of your time consuming.
Click to expand...
Click to collapse
||||| said:
ok, so great news, it works at least for exynos as well!
Safetynet also works!
Problems so far:
Can't change my keyboard - UI restarts
com.android.phone closes down
and it says system is unstable - please do a factory restore - on boot up.
But all in all it seems to work, with root etc.
Click to expand...
Click to collapse
Will do it later today
Any of you free just inbox me
For S908B EXYNOS Users
I have added Bootlogo error text removal file in Download area. Instructions packed inside.
PS : DON'T USE ON SNAPDRAGON device
.
A thousand thank yous @dr.ketan and to @||||| for your Exynos work
Just need delivery of my S22 from Sammy now
dr.ketan said:
For S908B EXYNOS Users
I have added Bootlogo error text removal file in Download area. Instructions packed inside.
PS : DON'T USE ON SNAPDRAGON device
Huge Huge thx Dr my Bro and @||||| for all Awesome job.
Click to expand...
Click to collapse