Who's back? We're back.
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at CarbonROM's GitHub... and at CarbonROM Gerrit.
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Ask a question on our IRC channel. Connect to #teamcarbon on irc.freenode.net or click here. You'll find several other Carbon fans and usually one or more devs as well. Please be polite.
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
All tanks go to @Myself5 and @CarbonROM
XDA:DevDB Information
CarbonROM | cr-5.1 for Xperia Z5P E68XX (Unofficial), ROM for the Sony Xperia Z5 Premium
Contributors
kv123, Myself5, CarbonROM
Source Code: https://github.com/CarbonROM
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Testing
Created 2017-10-09
Last Updated 2017-10-12
Reserved
CarbonROM:
CARBON-CR-5.1-MOO-UNOFFICIAL-satsuki-20171020-0539.zip
CARBON-CR-5.1-MOO-UNOFFICIAL-satsuki-20171008-2110.zip
TWRP can be found here:
https://forum.xda-developers.com/sho...87&postcount=2
Reserved
09/10/2017 1st build
20/10/2017 fresh build
What is the difference between this rom an your ressuruction remix rom?
ok, i'll give it a try, thanks
vensterbank said:
What is the difference between this rom an your ressuruction remix rom?
Click to expand...
Click to collapse
Please read rom descriptions. Resurrection Remix the ROM has been based on LineageOS (formerly CM) ,slim, omni and original Remix ROM. CarbonROM is another rom based on AOSP. This build for those who like CarbonROM.
If no one need this rom i will delete thread.
kv123 said:
Please read rom descriptions. Resurrection Remix the ROM has been based on LineageOS (formerly CM) ,slim, omni and original Remix ROM. CarbonROM is another rom based on AOSP. This build for those who like CarbonROM.
If no one need this rom i will delete thread.
Click to expand...
Click to collapse
Directly aosp would be more stable than LOS in certain way?
Sent from my Sony E6883 using XDA Labs
---------- Post added at 06:25 PM ---------- Previous post was at 06:23 PM ----------
Other question. I've got rr installed in my e6833 can install carbom rom over rr? Must wipe system, data, dalvik and cache?
Thanks.
Sent from my Sony E6883 using XDA Labs
Hakkinen3K said:
Directly aosp would be more stable than LOS in certain way?
Sent from my Sony E6883 using XDA Labs
---------- Post added at 06:25 PM ---------- Previous post was at 06:23 PM ----------
Other question. I've got rr installed in my e6833 can install carbom rom over rr? Must wipe system, data, dalvik and cache?
Thanks.
Sent from my Sony E6883 using XDA Labs
Click to expand...
Click to collapse
You need to wipe data, dalvik and cache. System overwrites when you install rom.
I think that stability is the same.
What a surprise!
Stock Kernel ？ Or Carbon‘s?
924973961 said:
What a surprise!
Stock Kernel ？ Or Carbon‘s?
Click to expand...
Click to collapse
Kernel from CarbonROM sources. Almost the same as in LineageOS
Ok...
MTP, PTP, etc not always working most of the time is only charge.
Touch Screen is not very sensitive.
Edit: Battery is draining fast.
Is has root this rom?
Hakkinen3K said:
Ok...
MTP, PTP, etc not always working most of the time is only charge.
Touch Screen is not very sensitive.
Edit: Battery is draining fast.
Is has root this rom?
Click to expand...
Click to collapse
The issue with MTP is happening on Z5 on RR, LineageOS, etc., too
so it's a CAF/upstream, whatever custom ROM issue
Use a adb file manager or adb directly to pull and push files
(for windows there's Total Commander with a ADB file plugin https://totalcmd.net/plugring/android_adb.html )
Hakkinen3K said:
Ok...
MTP, PTP, etc not always working most of the time is only charge.
Touch Screen is not very sensitive.
Edit: Battery is draining fast.
Is has root this rom?
Click to expand...
Click to collapse
No, all my roms are not rooted by default.
zacharias.maladroit said:
The issue with MTP is happening on Z5 on RR, LineageOS, etc., too
so it's a CAF/upstream, whatever custom ROM issue
Use a adb file manager or adb directly to pull and push files
(for windows there's Total Commander with a ADB file plugin https://totalcmd.net/plugring/android_adb.html )
Click to expand...
Click to collapse
Hakkinen3K said:
Ok...
MTP, PTP, etc not always working most of the time is only charge.
Touch Screen is not very sensitive.
Edit: Battery is draining fast.
Is has root this rom?
Click to expand...
Click to collapse
Is issue appears on windows?
kv123 said:
Is issue appears on windows?
Click to expand...
Click to collapse
Yes, Windows 10 Anniversary Edition
zacharias.maladroit said:
Yes, Windows 10 Anniversary Edition
Click to expand...
Click to collapse
I use Xubuntu. Never heard about this issue.
please update, last build included patches that fixed WIFI KRACK and Bluetooth BlueBorne vulnerability
nice
Related
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you find everything you need to know about SlimRoms.
Downloads - Download the rom, gapps and other addons.
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequent asked questions with answers.
Kernel Source - The source of your device's kernel.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Forum
Disclaimer: SlimRoms are not responsible for any damages to your device.
XDA:DevDB Information
SlimKat - Amami, ROM for the Sony Xperia Z1 Compact
Contributors
OmarEinea, SlimRoms, prbassplayer
Source Code: https://github.com/SlimRoms
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: Build 9.0
Stable Release Date: 2014-12-26
Current Beta Version: Build 8.20
Beta Release Date: 2014-12-09
Created 2014-08-16
Last Updated 2014-12-29
Build 7.2.1 has 245 DPI (which makes everything tiny),
Next weekly will have 268 PDI (hope that is a little better)
So does this mean that we can start downloading from SlimRom official website?
I'm so happy!!!
Kudos!
Sent from my Xperia Z1 Compact
Yes of course, this means you can download directly from SlimRoms website,
And you'll have a weekly as soon as Slim team release one (you don't have to wait for me to do it )
Also you should be able to update using OTA updates between releases.
Enjoy.
Regards,
Omar.
Great
Wowo! I have a question, isn't Slimroms based on CyanogenMod or is it only ASOP?
pathaniya said:
Wowo! I have a question, isn't Slimroms based on CyanogenMod or is it only ASOP?
Click to expand...
Click to collapse
Nope, it is almost based on AOSP, there are some minor parts fetched from CyanogenMod repos (but insignificant to say it is based on CM )
Maybe a question you hear alot,but hows the battery life?
Sent from my D5503 using XDA Free mobile app
Are there any known issues?
thedoginthewok said:
Are there any known issues?
Click to expand...
Click to collapse
So far I don't think there is any bug, Try it for your self and report back if you find any:good:
DiederikC said:
Maybe a question you hear alot,but hows the battery life?
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
I've tried a lot of ROM, and this is by far the best battery handles.
New weekly is up
http://slimroms.net/index.php/downloads/dlsearch/viewcategory/1284-amami
Thanks OmarEinea
When making phone calls through a Parrot MKI9200 bluetooth car system on this rom, the person in the other end says that my voice stutters and is not easy to understand.
It does not happen on "stock" roms.
Anybody having the same issues.
Other than that it Works great.
essi said:
New weekly is up
http://slimroms.net/index.php/downloads/dlsearch/viewcategory/1284-amami
Thanks OmarEinea
Click to expand...
Click to collapse
Is updating through OTA working? 7.2.1 to 7.4!
henhoy said:
When making phone calls through a Parrot MKI9200 bluetooth car system on this rom, the person in the other end says that my voice stutters and is not easy to understand.
It does not happen on "stock" roms.
Anybody having the same issues.
Other than that it Works great.
Click to expand...
Click to collapse
I'll look into it.
OmarEinea said:
Is updating through OTA working? 7.2.1 to 7.4!
Click to expand...
Click to collapse
No, OTA in Slimcenter is not working ( Translated from German: Properties of SlimOTA can not be read )
(Notifications in App are enabled!)
---------- Post added at 06:06 PM ---------- Previous post was at 06:04 PM ----------
henhoy said:
When making phone calls through a Parrot MKI9200 bluetooth car system on this rom, the person in the other end says that my voice stutters and is not easy to understand.
It does not happen on "stock" roms.
Anybody having the same issues.
Other than that it Works great.
Click to expand...
Click to collapse
No problems here with BMW bluetooth calls, only thing is that I can not access messages from car, but this is since ever on Amami with SlimKat (Stock is working),
with SlimKat on old Galaxy S2 it was working too. (But that is nothing important would be just nice to have )
Has the latest slim kernel wifi tether fix?
funiewski said:
Has the latest slim kernel wifi tether fix?
Click to expand...
Click to collapse
Unfortunately not yet, will try to include it in the next weekly with many other updates,
I'm busy until tomorrow, after that will start working again.
Regards,
Omar.
OmarEinea said:
So far I don't think there is any bug, Try it for your self and report back if you find any:good:
Click to expand...
Click to collapse
It's great to hear that this is now official, however, where is the link to the ROM for the Xperia Z1 Compact? I can't see it on their site.
Thanks
IndyUK said:
It's great to hear that this is now official, however, where is the link to the ROM for the Xperia Z1 Compact? I can't see it on their site.
Thanks
Click to expand...
Click to collapse
Go to the link in OP and enter Weekly and amami folder will be the very last one,
Also if you go to Official dir instead, you'l find an empty folder called amami it will be filled with big releases (8, 9, 10....)
OmarEinea said:
Go to the link in OP and enter Weekly and amami folder will be the very last one,
Also if you go to Official dir instead, you'l find an empty folder called amami it will be filled with big releases (8, 9, 10....)
Click to expand...
Click to collapse
Thank you! :good:
-- Begin copy-pasta template from one of my other unofficial build threads... please let me know if I miss updating something --
Note: I don't run this ROM personally, I really just built it. It shouldn't, but it may eat your cat.
Code:
*** Disclamer
-- You install these at your own risk! You are responsible for anything that happens from flashing these files to YOUR phone! If your
phone melts into a pile of goo, catches on fire etc. IT IS NOT MY RESPONSIBILTY BUT YOURS!
FAQ:
Q: Can I use this?
A: Do you have a developer aboot? If so then yes, but I won't help you install a developer aboot. I only ever had a Developer phone, so I only know the process as well as reading the thread. See this thread for info/help: HERE
Q: When/how often are these built?
A: Less often than my CM13.0 build, but at least every week. Unlike my CM13.0 build, I don't use this ROM so I won't be doing a "does it boot" check before uploading. Please tell the entire thread if one day's build doesn't work properly.
Q: Why did you do this ROM next instead of ______?
A: #1, it was easy. Vanir doesn't require me to make a new branch to change file names and text lines in the makefiles from "cm" to XXXX. #2, Vanir holds a special place to me for having device trees that worked for our S5 at least through Lollipop -- they allowed me to make my own CM builds. #3, I used it back in the day and they seemed pretty tight.
Q: Can I get help with something?
A: I have a full-time job and travel a lot. I'll try to jump in and answer some questions, but there is a lot of info out there for you to learn on your own. Aside from you having a vzw-variant, most of the details are standard KLTE.
Click to expand...
Click to collapse
Recovery:
The standard KLTE TWRP 3.1.0-0 should mostly work, but MTP doesn't work for any klte* variant using it.
I prefer KToonsez's 2.8.6-based Recovery. It's older, but MTP works.
There are Unofficial 3.*.0-* recoveries available by @jcadduono. I find that these don't support decryption properly, which I find to be mandatory.
Like many other devices, the .zip files can be flashed in a recovery. The .tar.md5 files can be flashed in ODIN. The .img files can be flashed using Flashify, a TWRP recovery. You can even get an .img file from a .zip or .tar.md5 if you just open it up.
If you use adopted storage then things get odd. The latest recovery by @jcadduono MAY support adopted storage if you don't encrypt userdata (I personally know that TWRP handles adopted storage for jflte and d2), but I do use encryption so I don't use that recovery. It may be that you only see /data/media/0 -- if so, I find that using Flashify for each nightly is the most straightforward way to update, but you could always manually copy to /data/media/0 before rebooting to recovery. This is a standard Marshmallow and TWRP thing.
Click to expand...
Click to collapse
Modem/Firmware:
Most of the LP modem/firmwares should work, but I use the one PB1 here. This modem matches with the proprietary vendor files that are part of the build. Flash it in ODIN. Please note that some have reported that you cannot flash these after the aboot unlock; If you cannot flash the PB1 modem/non-hlos it shouldn't cause any big problems.
https://www.androidfilehost.com/?fid=24459283995308895
Click to expand...
Click to collapse
GApps:
Various Vanir threads recommend SlimGapps, OpenGapps, or a Gapps packaged by DHO (the Vanir main developer). If you use OpenGapps, make sure to use an 6.0 version for ARM architecture. Like with all Gapps selections, they're all pretty much the same with the differences being which apps are packaged and what versions are packaged.
OpenGapps
SlimGapps
DHO's Gapps. These are a little bit older.
Click to expand...
Click to collapse
Downloads (the thing you were looking for):
I'll build at least once per week, at least until the RR team picks up the torch. Once the build is complete, I upload it to my AFH account.
VanirAOSP m6 KLTEVZW weekly-ish
Click to expand...
Click to collapse
Does/Doesn't Work:
Everyone that gives it a shot needs to let the thread know.
Click to expand...
Click to collapse
Thanks:
Everyone on the Vanir and CM teams. This is 99% of their stuff with just a couple tweaks to make it build, (hopefully) boot, and run for KLTEVZW. See Post 2 for those changes.
Click to expand...
Click to collapse
Android Version: 6.0.1_r22 (prior to 20160406 build)
Android Version: 6.0.1_r24 (20160406-present build)
I forgot something. I know I did. I'll try to update this post sometime.
More things...
Source
In order of importance:
VanirAOSP github: https://github.com/VanirAOSP
Cyanogenmod github: https://github.com/cyanogenmod
My github: https://github.com/haggertk
Click to expand...
Click to collapse
Man, you're awesome. Glad to have someone like you to port all these rims. ***roms oh my god
Thanks for turning me in a flashing junkie again... Lol, great work... Now just miss PacMan rom, Dirty Unicorns and AOKP...
Running smooth with Vanir..
Thanks haggertk!!
Thanks again! I love how smooth and stable it is. Not too much mod bullcrap, and I get my WiFi on notifications.
Sent from my SM-G900V using XDA-Developers mobile app
Runs smooth, what happenned to this thread?
Is this ROM still supported? Anyone know what's going on with it?
MortimerR said:
Is this ROM still supported? Anyone know what's going on with it?
Click to expand...
Click to collapse
Check here..
http://forum.xda-developers.com/showthread.php?t=3355159
Sent from my SM-G900V using Tapatalk
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Introduction
Resurrection Remix the ROM has been based on CM,slim.omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Resurrection Remix
Special thanks to, the CM team,OMNI team ,SLIMROMS and of course to all the supporters
Screens (used theme DEEP DARKNESS //)
Installation instructions
1. Install ROM with TWRP and let it boot
2. Reboot to TWRP again
3. Install latest open-gapps-pico (http://opengapps.org)
4. Configure system
5. Enjoy!
Downloads
H850: https://gwolf2u.com/download-category/h850/
H830: https://gwolf2u.com/download-category/h830/
XDA:DevDB Information
[UNOFFICIAL][H850][H830][MM] Resurrection Remix For LG G5 (No longer updated), ROM for the LG G5
Contributors
gwolfu, drsn0w, King_lilrowrow
Source Code: https://github.com/ConquestDev
ROM OS Version: 6.0.x Marshmallow
Based On: Resurrection Remix
Version Information
Status: No Longer Updated
Created 2016-10-29
Last Updated 2016-11-29
Reserved
Changelog:
v5.7.4-20161101-h850
- first atempt on fixing bluesleep wakelock
- first atempt on fixing hotspot
Cool.
Where are the changelogs and what is working or not workig
Sent from my LG-H850 using XDA-Developers mobile app
Chiko-HH said:
Cool.
Where are the changelogs and what is working or not workig
Sent from my LG-H850 using XDA-Developers mobile app
Click to expand...
Click to collapse
This is just the initial build so no changelog
As for what is working and what not, well most of the things work so waiting to hear what is not
Making a Nandroid now, but then I have to go afk for a bit and need my phone ... I'll be flashing it this afternoon though :victory:
I haven't had RR since I got my G5 and sold my S4 (with RR on it :laugh: ) in early May, can't wait to get back on it
H830 is already building now
Posting as soon as done
gwolfu said:
H830 is already building now
Posting as soon as done
Click to expand...
Click to collapse
If you are responsible for h850 builds, when would you like me to take over the h830 builds? Not trying to sound rude, sorry if I do, just don't know how to word my question.
nima0003 said:
If you are responsible for h850 builds, when would you like me to take over the h830 builds? Not trying to sound rude, sorry if I do, just don't know how to word my question.
Click to expand...
Click to collapse
Just sent PM but seems it did not work
Wanted to build just one version to make sure it works and from there will let you do tests and builds
No prob you are not rude
Nice to see You here Mate! Welcome to the Dark Side x)
Miustone said:
Nice to see You here Mate! Welcome to the Dark Side x)
Click to expand...
Click to collapse
like it here on the dark side
nah kidding... doing this for the free puppies
anyway, H830 build it up
@nima0003 will most likely try to maintain it since he has that variant and can test it
I will build H850 versions
Why is there 2 threads for Resurrection Rom?
aladin6 said:
Why is there 2 threads for Resurrection Rom?
Click to expand...
Click to collapse
Because first build by nima0003 was not booting due to some compiling errors
I compiled for both H850 and H830 to let members test and add feedback, but my focus is the H850 variant as I don't own the other
So I explained him how to build it properly and he will most likely take care of the H830 build
Also this thread is a DevDB one that is better suited for development builds
So why don't you add a detail on this thread's title like [H850] and the other to [H830]?
Since waiting for nima0003 to confirm if the build process worked and if he can take care of builds
For now this is for both H850 and H830 and can also continue to be so in the future
This is like the CM thread where two members are taking care of different variant builds
Flashed it and mostly set it up, now restoring apps with TiBu ... oh how I missed all the possibilities RR has for customizations :victory: :angel:
Seeing the RR bootlogo nearly brought tears to my eyes ... almost 6 months without RR was definitely too long :crying:
Thanks for making RR possible for this amazing phone @gwolfu :good:
I hope that we'll get all bugs fixed in CM to profit of Resurrection ROM.
Love RR. IMO its tbe best. I have the h850. Downloading now. I will report if any bugs were found. Thanks @gwolfu
Only bug I found so far is that Allo fc immediately when trying to open it ... tried 2 times, uninstalled/installed Allo again, no dice.
But since everybody I know uses Hangouts or Whatsapp anyway I'm not too bothered about it :angel:
Well I have 2 bugs:
1. double tap to wake don't work.
2. While changing led notification led always blinking.
Otherwise from what I've see all works well.
I have 2 requests:
1. Can u make vibration stronger?
2. Can u make more space between nav bar icones.?
Thanks for your hard work
Hi World,
I've been building a ROM nightly, pulling from LineageOS, LineageOMS, and SultanXDA.
It's been fine for me, so I thought I'd share it for others to use too.
This is my first go at posting this kind of thing, so please go easy on me.
Sources:
https://github.com/LineageOS
https://github.com/LineageOMS
https://github.com/sultanxda
Credits
LineageOS team
Substratum team
@Sultanxda
Before Flashing...
You MUST be on the correct Firmware for this image to flash. Download them here:
OnePlus 3T
OnePlus 3
Downloads:
XDA
Android File Host
Flash the firmware image in TWRP. From there in, it's the usual instructions. Flash in TWRP, optionally use GAPPS and Magisk/SuperSU/Lineage-Addon.
Usual risks apply.
If there is any other information I should be including here, please let me know.
XDA:DevDB Information
Lineage OS with SultanXDA tweaks and OMS, ROM for the OnePlus 3
Contributors
prmcmanus
ROM OS Version: 7.x Nougat
ROM Firmware Required: OB8
Based On: LineageOS
Version Information
Status: Nightly
Created 2017-06-18
Last Updated 2017-06-18
Changelog
In the attachments.
This is the how I'm capturing Change Logs until I set up my own repo. Advice is welcomed if there are better methods.
Code:
repo forall -pc ' git log --since=$(cat /home/mcmanus/android/changelog/lastbuild_OP3.txt) --date-order ' > /home/mcmanus/android/changelog/OP3-changelog-$(date +%Y-%m-%d).txt
date +%d.%m.%Y > /home/mcmanus/android/changelog/lastbuild_OP3.txt
Reserved
Good start bro!! ?
@prmcmanus
Welcome brother..[emoji120]
There is already a sultanxda based + oms supported build, so please will you tell us about changlog...
Anyway We appreciate your work and contribution for 3(T)...[emoji4]
mukesh22584 said:
@prmcmanus
Welcome brother..[emoji120]
There is already a sultanxda based + oms supported build, so please will you tell us about changlog...
Anyway We appreciate your work and contribution for 3(T)...[emoji4]
Click to expand...
Click to collapse
Thanks I didn't realise there was already a similar ROM, which is why I built this one.
It looks like the other is adding other features, whereas I'm sticking to the sources for now, so that's be the difference between the two.
I'll get the change log in the reserved post
Hi! Thank you for your work!
Please consider taking features from this unofficial Sultan's build by @matssa as, according to him, he will stop building for OP3 as OP5 comes out.
Would be awesome if your rom kinda 'inherited' his work into the future
Nezorflame said:
Hi! Thank you for your work!
Please consider taking features from this unofficial Sultan's build by @matssa as, according to him, he will stop building for OP3 as OP5 comes out.
Would be awesome if your rom kinda 'inherited' his work into the future
Click to expand...
Click to collapse
Hi @Nezorflame, I didn't realise this ROM existed until yesterday! Looks interesting, and definitely more involved than what I'm currently doing. I won't be implementing anything from that ROM until development ceases on it. If/when that happens, I'll definitely look into it
prmcmanus said:
Hi @Nezorflame, I didn't realise this ROM existed until yesterday! Looks interesting, and definitely more involved than what I'm currently doing. I won't be implementing anything from that ROM until development ceases on it. If/when that happens, I'll definitely look into it
Click to expand...
Click to collapse
He did mention that he is gonna keep his repos up for anybody who wants to continue updating and building his version.
Sent from my ONEPLUS A3000 using Tapatalk
prmcmanus said:
Hi @Nezorflame, I didn't realise this ROM existed until yesterday! Looks interesting, and definitely more involved than what I'm currently doing. I won't be implementing anything from that ROM until development ceases on it. If/when that happens, I'll definitely look into it
Click to expand...
Click to collapse
Looking forward to it! One thing would be nice though, even if we forget about the features - OTA update
Started using your builds as Matssa is about stop supporting his builds. Got no issues, runs stable and smooth. Looking forward to future updates. Update notes would definitely help this rom grow, ota as well
Switching to this ROM as well as matssa will do only one, final build. @prmcmanus please consider my previous request
Would be really cool if this Dev picks up right where Matsaa leaves off.
Nezorflame said:
Hi! Thank you for your work!
Please consider taking features from this unofficial Sultan's build by @matssa as, according to him, he will stop building for OP3 as OP5 comes out.
Would be awesome if your rom kinda 'inherited' his work into the future
Click to expand...
Click to collapse
Stupifier said:
Would be really cool if this Dev picks up right where Matsaa leaves off.
Click to expand...
Click to collapse
I think calling me a Dev might be overly-generous at this point, but I'll learn as I go and do what I can.
I work a 4-on 4-off shift pattern, so I'll look into Matssa's ROM more in a couple of days, and I aim to pick it up.
prmcmanus said:
I think calling me a Dev might be overly-generous at this point, but I'll learn as I go and do what I can.
I work a 4-on 4-off shift pattern, so I'll look into Matssa's ROM more in a couple of days, and I aim to pick it up.
Click to expand...
Click to collapse
That's good news! Matssa managed to get lock screen blur working like on official Lineage. Sultan's builds and your current builds don't have this feature so I'm looking forward to see you pick his ROM up.
Sent from my ONEPLUS A3000 using Tapatalk
Yes! Finally just a LineageOS ROM with sultan kernel and OMS without all the extra stuff
THANK YOU!
OTA updates would be one nice thing to add... For the rest it's perfect as is
@prmcmanus
I've just downloaded your build to flash..
Why are you not updating your thread, I've seen you're making build daily ( may be nightly)...[emoji106]
mukesh22584 said:
@prmcmanus
I've just downloaded your build to flash..
Why are you not updating your thread, I've seen you're making build daily ( may be nightly)...[emoji106]
Click to expand...
Click to collapse
'Cos it's the first ROM I've shared and I don't know what everyone wants to know
I've been a bit suspicious of the fact all the builds are coming out at a very similar size, so I've started from a clean slate on the last two builds and they still turn out similar.
Not had a chance to look at Matssa's build properly yet.
OTA will be the first thing I implement, given that it's what is being requested
prmcmanus said:
'Cos it's the first ROM I've shared and I don't know what everyone wants to know
I've been a bit suspicious of the fact all the builds are coming out at a very similar size, so I've started from a clean slate on the last two builds and they still turn out similar.
Not had a chance to look at Matssa's build properly yet.
OTA will be the first thing I implement, given that it's what is being requested
Click to expand...
Click to collapse
I've flashed your latest build and everything seems fine... Just unable to install V4A...
Will report you after a battery cycle....
@prmcmanus idle drain is so solid let's check active drain..and also installed V4A after many attempt...
Thanks for build...
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
MoKee OpenSource is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion...
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
Read here for developer application; with this, you can host your unofficial MoKee builds on our server!
Important information:
This thread is for official MoKee 10.0 builds for OnePlus 3/3T. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Tips:
You need at least OxygenOS 9.0.2 firmware, otherwise you'll get error 7 when installing the zip. Latest firmware is recommended.
Installation:
First time flashing MoKee 10.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (Due to system-as-root, you may encounter minor issues with official TWRP. The following custom TWRP uses system-as-root and is highly recommended: https://androidfilehost.com/?fid=4349826312261695823) Note that it's NOT compatible with pre-10 ROMs!
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash MoKee
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/mokee
Credits:
MoKee Developers: https://github.com/orgs/MoKee/members
Code Aurora Forum
LineageOS
AOSP
Slim Roms
OmniROM
......
Download:
https://download.mokeedev.com/?device=oneplus3
XDA:DevDB Information
MoKee, ROM for the OnePlus 3
Contributors
dianlujitao
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Nightly
Created 2020-01-16
Last Updated 2020-01-16
dianlujitao said:
...
Optional: Install the Google Apps addon package
...
Click to expand...
Click to collapse
Which Gapps is recommended? I couldn't find a Gapps package on Mokee site.
Sent from my OnePlus3T using XDA Labs
Do i need to install every nightly by ota or can i skip?
BillGoss said:
Which Gapps is recommended? I couldn't find a Gapps package on Mokee site.
Click to expand...
Click to collapse
EDIT: They aren't on the site :silly: , I just saw "Open Gapps" in the official site... I would install Open Gapps then as security measure
Master_TC said:
Do i need to install every nightly by ota or can i skip?
Click to expand...
Click to collapse
you can skip
deleted
Hello,
Why there are so few posts in this ROM? Anyone using it?
Can anyone tell is it stable to be used as a daily driver, any major problems?
Thank you.
ammarwajihi said:
Hello,
Why there are so few posts in this ROM? Anyone using it?
Can anyone tell is it stable to be used as a daily driver, any major problems?
Thank you.
Click to expand...
Click to collapse
i am using it, and daily driver rom, no major problems for now, good rom.
Kernel in enforced mode.
Rom encrypted
locked bootloader
helderfp said:
i am using it, and daily driver rom, no major problems for now, good rom.
Kernel in enforced mode.
Rom encrypted
locked bootloader
Click to expand...
Click to collapse
Oh! My bad it was just released today. Even on Pie thread, there are not many posts, so I was confused.
Thanks, man.
ammarwajihi said:
Oh! My bad it was just released today. Even on Pie thread, there are not many posts, so I was confused.
Thanks, man.
Click to expand...
Click to collapse
Post by dianlujitao made today but rom official released 2 days ago
60 Fps video recording, is it supported ?
helderfp said:
Post by dianlujitao made today but rom official released 2 days ago
Click to expand...
Click to collapse
Okay, and can you provide link gapps?
Gapps: https://sourceforge.net/projects/opengapps/files/arm64/beta/
This rom works on encrypted devices like LOS 16 right?
Thanks for your work @dianlujitao!!
zadock said:
This rom works on encrypted devices like LOS 16 right?
Thanks for your work @dianlujitao!!
Click to expand...
Click to collapse
Yes
Sent from my OnePlus3T using XDA Labs
Master_TC said:
Gapps: https://sourceforge.net/projects/opengapps/files/arm64/beta/
Click to expand...
Click to collapse
Thanks man
lost 20% battery over night. stand by drain very high
Rom is pretty good. But the fact is you have to donate to unlock all the customisations, and the fact that there are ads in mokee update centre really let me down from using this rom. I know running a server needs money and all, but including ads in inbuilt apps is a big no from me!
Sent from my ONEPLUS A3003 using Tapatalk
The rom is working great, all thanks to the developers. I wanted to know if there is a way to turn VOLTE on on this rom, thanks
Rajesh_m said:
Rom is pretty good. But the fact is you have to donate to unlock all the customisations, and the fact that there are ads in mokee update centre really let me down from using this rom. I know running a server needs money and all, but including ads in inbuilt apps is a big no from me!
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Which customisations do you mean?