Hi all. This is my first post so I don't know if it's in the correct place or not.
The thing is' I live in Cuba. Mobile network here is limited to 2G and 3G on 900Mhz with a sole provider, ETECSA. I got a sprint's HTC One A9 unlocked from my cousin in USA. Voice and SMS work fine but data is a no go no matter what I do. Android UI shows disconnected while *#*#4636#*#* status screen displays connecting all the time. I've setup manually the apn and tried every option as well (setting it as default, internet,supl), setting username as default. Nothing works. I noticed I can't change the bearer for the apn settings. Any fix or solution, ideas?. I can provide diagnostics data being directed the appropriate way. Also the phone has twrp and is rooted via supersu. Thanks in advance.
PS. Forgot to say. Running Android 7.0.
Hola
Hola amigo .. tambien soy de cuba y me paso exactamente lo mismo...encontrast alguna solucion.. por favor hazmelo saber si puedes...mi numero es 52658334
Related
I have a MDA with -T---mobile, and want to use with Movistar, I have Unlock with xdadev_all_unlock-v1.3, all seem ok, I don´t know if I need to do some configuration I don´t know what can to do
What do you want to configure? MMS, WAP/GPRS settings? Does it now work with Movistar since you were able to unlock it?
hello,
I also used that program to use MDA compact (t-mobile) with AMENA in Madrid, but i dont know what you need to configure GPRS and all that. i imagine on movistar homepage you can get that info. does the phone itself (not mms, gprs etc) work ok on movistar? it should work fine - the phone will be completely unlocked after using that unlock program.
un saludo,
-Neil.
you must see this spanish web, and see the solution
esta en español, asi que no tendras problemas
http://www.todopocketpc.com/foro/showthread.php?t=42893
I bought a Treo 750 from AT&T. I moved to Argentina, and unlocked the phone for any SIM. I got a Prepaid CTI Movil SIM (which is now Claro) and the Claro card to charge it.
I was able to activate the sim with the phone, but am unable to charge my card to it.
So I am wondering if my AT&T WM6 ROM is not allowing me to perform calling from the phone. Is it a different radio than the one AT&T uses?
Maybe this thread should be in Catellano, but my Spanish is very shaky.
Anyone else having an issue with a phone purchased in the US, but being used with CTI Movil in Argentina?
This is the error I get: "El servicio de prepago no se encuentra disponible" which translates to: "Prepaid service is not available."
I've searched for a while and found nothing and so decided to ask for help. Please.
nfopirate
http://pclove.us/argentina
call *611. If you can talk their automated system, then it shouldn't be a problem with the phone.
I can get to the fast speaking woman via *611, but I can't understand much.
Can you help me navigate through the menu to the place to enter my prepaid card number? When I try entering my number through the Mi CTI Movil menu, it sends the text message then comes back with the same error.
"El servicio de prepago no se encuentra disponible"
Any help would really be appreciated.
Issue resolved.
I don't know what the problem was, but I'm guessing it takes the network about 24 hours for your number and SIM to be registered so money can be added to the account. I just kept trying every 30 minutes or so and then one time it worked.
I hope this helps someone.
Dear all:
This is all new stuff to me...so please, bear with me.
Prior to last week I had a Moto Q9h from Claro PR for which I’m subscribed to their data plan. Most of the time (92% or more) that I had phone it was using their 3G network with no problems. Once in a while I got the “E”.
About a week ago or so I bought from (e-bay USA) a T-Mobile HTC Touch Pro 2 (T-Mobile_Rhodium) with the following OS and firmware versions:
Windows Mobile 6.5 (Build 21881.50.84)
ROM ver: 1.91.531.4 (74508) WWE
ROM date: 12/15/09
Radio ver.: 4.49.25.57
Protocol ver: 61.44tc.25.32AU
Once I got the phone, I unlocked it and I’m using my Claro SIM card however I’m not able to access Claro’s 3G network only Edge (E). After looking around on the net I found Claro’s PR APN names and ports. I added them onto the phone but it seems that I’m missing something cause I still can’t access Claro’s 3G network.
I have changed the phone settings to use Auto Network type and Band selection and I can connect using EDGE. If I forced the settings to use GSM/EDGE no problem, I can connect. If I forced the settings to use WCDMA I can’t connect at all.
Is there anything else I’m missing or overlooking to get the 3G configuration working on the phone?
Do I need to update the ROM or Radio? And if so, to which version?
Any ideas, advice, suggestions...
thanks in advance for your time and contributions.
warm regards...
Same problem here on the Claro network Dominican I have a edge connection but no 3g on my desire and my milestone too, but my chip work with blackberry on 3g.
sorry for my bad English please help!!!
The reason T Mobile phones have problems with Claro in Puerto Rico, is because T Mobile broadcasts their 3G at 1700Mhz, and Claro does at 1800Mhz, like AT&T. T Mobile phones cant receive the 1800Mhz signal, so you will never be able to get 3G on T Mobile phones, unless you use T Mobile. You must get the T Mobile phones, as unbranded international phones, to be able to get 3G with Claro and AT&T.
Motorola Defy with Claro PR
I just installed Gingerbread to my Motorola Defy but have no signal...My provider is Claro PR; if i choose the frequence band from TMobile im able to get signal just to make calls...Dont even show "E" for Edge...
What frequence should i use? Is it possible to get 3G with Claro PR?
Thanks...
cifeli34 said:
I just installed Gingerbread to my Motorola Defy but have no signal...My provider is Claro PR; if i choose the frequence band from TMobile im able to get signal just to make calls...Dont even show "E" for Edge...
What frequence should i use? Is it possible to get 3G with Claro PR?
Thanks...
Click to expand...
Click to collapse
Did you try putting the Claro APN so it can connect to the network?
Go to Settings > Wireless > Mobile Networks > Access Point Names
Press your menu button and choose New APN:
Name: Claro
APN: internet.claropr.com
Press menu again and choose save.
Good Luck
Intentastes ponerle el APN de Claro para que se pueda conectar a la red de Claro?
Ve a Ajustes > Conexiones Inalambricas > Redes Moviles > Nombres de Puntos de accesso
Oprimes menu y seleccionas Nuevo APN
Nombre: Claro
APN: internet.claropr.com
Oprimes Menu y seleccionas Guardar
Buena Suerte
sp0rkticus said:
Did you try putting the Claro APN so it can connect to the network?
Go to Settings > Wireless > Mobile Networks > Access Point Names
Press your menu button and choose New APN:
Name: Claro
APN: internet.claropr.com
Press menu again and choose save.
Good Luck
Intentastes ponerle el APN de Claro para que se pueda conectar a la red de Claro?
Ve a Ajustes > Conexiones Inalambricas > Redes Moviles > Nombres de Puntos de accesso
Oprimes menu y seleccionas Nuevo APN
Nombre: Claro
APN: internet.claropr.com
Oprimes Menu y seleccionas Guardar
Buena Suerte
Click to expand...
Click to collapse
Over a year later.. This worked for me using a Claro PR SIM on a still going strong Vibrant that I had laying around and got the SIM unlock code straight from T-Mo. 1.5 y/o Claro Galaxy SII apparently crapped out on me, lets see what the shop says. Pretty stable 3G signal even, if available.
THANKS!
Hi, i just bought a sprint s6 edge phone and I had to configure the apn in order to get 3g connection in Mexico with Telcel.
So what I'm trying to ask is that if I change the csc code from spr to tce then i would get the rom according my region and therefore 4g connection?
If this doesn't work, could I brick my phone?
Currentlu my phone is running renegade rom, and it's rooted.
Regards
You won't get 4g and it won't brick your phone. It'll only reset it back to factory settings but it will not unlock other frequencies then the current ones.
call sprint and get your msl code, go into ##data#, edit and turn on the bands for mexico. saludos y arriba las chivas
It should work
I have my Sprint S6 Edge connected to MetroPCS and I am receiving LTE. When I was in Mexico I got my same phone connect to Telcel and my 4GLTE was working also. Just go in to the APN settings and where it says bearer, put it to LTE. It takes a while to connect but it will connect. As far as I know you only need the MSL if you want to send and receive pictures on 4GLte since you will need to edit the MMSC URL from there. Also once you change the APN settings make sure the network mode switched to automatic. In my experience Changing the sales code bricked my phone by saying "unfortunately, system ui has stopped" forcing me to go back to my stock rom.
Hi,
I'm running superman rom on my french GS7 and I have lately faced issues with the mobile data connection while roaming. My connection settings are correct and the connection sometimes works, but most of the time (not always in the same area) it simply doesn't connect. I have tried to restrict to 3G but it didn't help...
Any idea ?
Anyone could help please? I'd like to know how to debug it to figure out whether it comes from the rom, my settings or my provider..
Envoyé de mon SM-G930F en utilisant Tapatalk
Flash stock and factory reset, then you'll have the answer to all three