HI, i have a couple of weird issues on my Mate 9, look out in forum and online and get nothing:
1. Overnight the phone auto disabled wifi and goes into vibration, i have checked the turn on/off settings and both are disabled, also not using Energy Saving. can't find any setting related.
2. When connected to my car Bluethoot and playing spotify or any other music app, sometimes the Phone Bluetooth "auto disable" and have to manually enabled.
3. When connected to my Gear S3, and the start my car it connects to BT, but does not enable Phone call, have to go into BT settings for car and enabled, the it disabled the Phone calls on Gear S3. Not found any proiority for BT devices.
None of this happen with same devices and Samsung S7, so it seems to be the Mate 9, any ideas, My mate it's MHA-L29 C605B111.
Thanks
Related
Hey Guys -
I've had my Gear S2 for a few months now and even though I enjoy it, have a nagging issue I can't seem to fix. I've searched everywhere and tried a few things, but no luck.
My Issue
My Gear S2 is obviously connected to my phone via bluetooth most of the time. If / when I power on my headset (M 165), it does not work as phone still goes to the Gear S2. In Bluetooth Settings, it shows both connected, but the M165 says "(No Phone) behind it. The only way I can use the headset is if I turn off bluetooth on my Gear S2. The same thing happens when I connect to my car's bluetooth as it says "No Phone" too. (see attached screenshot)
What I've Tried
- Disabling "Phone Audio" for the Gear S2: When I do this, the watch disconnects from BT. When I reconnect it, Phone Audio is enabled again
- Bluetooth Auto Connect: I installed this and set the Gear S2 to enable everything but Media and Call audio then set the headset to have only those two enabled. Didn't make a difference when testing as things still connected the same way
- Tasker: I've tried using a variety of plugins to get things to connect correctly, but still no go
Specs
- Phone: HTC One A9 / Marshmallow 6.0.1 / Rooted / s-off
- Watch: Gear S2 / Latest Firmware
- Headset: PLT_M165
Any suggestions? Am I perhaps using Bluetooth Auto Connect wrong? Thanks!
Have you tried another Bluetooth headset? I recommend you to try it if you didn't. I am not experiencing this issue and here is my setup:
I have Note 5 with latest Android 6.0.1 available.
Gear s2 (3g/4g model from T-Mobile) with latest firmware available.
I have Jawbone ERA (few year old model)
I also have Plantronics Legend
When watch is connected to my phone and then I connect any of the above Bluetooth headsets to my phone, then I am able to make/received calls on the headsets and in Bluetooth settings I see "phone" where as your pictures show as "no phone".
How did you connect your watch to your phone by just pairing via Bluetooth or through Gear Manager app?
I have this same issue with my Pixel 2XL it seems that having a samsung phone fixes this issue but any other android phone will exhibit this issue. if you disable phone call audio to the watch everything else will work properly. but you cannnot take calls on the watch.
Has anyone found a better fix then this???
Hi,
my Mate 9 connects fine with my car, "contact sharing" works as well as " message access" and "phone audio"- so basically the phone functions are working as they should.
However I do have problems with my "media audio". This doesn't get activated in most of the times (like 90%). Which means I have to go into the Bluetooth settings, click on my connected car and switch the "media audio" on in order to listen to my cell phone audio player.
At first I thought it was my car, but it works perfectly with my other two Samsungs (S6 and S5) - media audio is getting activated automatically and music is playing. So it has to do with my Mate 9.
Does anyone have any recommendations on what to do here? At this (frustrating) point I'm even willing to use a third party app or widget which allows me to quickly activate media audio without going through all the Bluetooth setting menus.
Help?
I haven't got a solution but I am having the same issue
.
Sent from my MHA-L09 using Tapatalk
Having the same problem with not just my car but also my Creative Soundblaster Roar. Everytime I try to play music from my phone when I am in the car, it plays from the phone instead, but the song title does show in the car display screen. I need to restart my phone and reconnect before I can play it through the car sound system
Bluetooth Auto Connect has always been helpful for me and works fine on my p10
Same problem here (p20 pro) except that it is "phone audio" that doesn't turn on automatically. Have to turn it on manually each time. Very irritating.
I've got the same problem, has anyone found a fix yet?
Hi all,
I have a 2008 vehicle in which Bluetooth seems to be a problem depending on which ROM I have installed on the device.
I'm currently on Android 9 OB 7 and Bluetooth connects and stays connected through incoming and outgoing calls. Works flawlessly.
However, with for example Lineage (among others), the Bluetooth pairs, but connection drops soon after or drops after the first call with the car stereo showing "Net Search", meaning the car BT lost service but the phone Bluetooth is still connected. I've tried restarting and resetting network settings but no luck at all. Changing dev options doesn't work either.
I'm thinking it could be a Bluetooth stack difference?
Is there a way to replace the lineage Bluetooth with OOS?
There is no bluetooth.default.so file that I could find
Any help or direction is appreciated.
nickelnine said:
Hi all,
I have a 2008 vehicle in which Bluetooth seems to be a problem depending on which ROM I have installed on the device.
I'm currently on Android 9 OB 7 and Bluetooth connects and stays connected through incoming and outgoing calls. Works flawlessly.
However, with for example Lineage (among others), the Bluetooth pairs, but connection drops soon after or drops after the first call with the car stereo showing "Net Search", meaning the car BT lost service but the phone Bluetooth is still connected. I've tried restarting and resetting network settings but no luck at all. Changing dev options doesn't work either.
I'm thinking it could be a Bluetooth stack difference?
Is there a way to replace the lineage Bluetooth with OOS?
There is no bluetooth.default.so file that I could find
Any help or direction is appreciated.
Click to expand...
Click to collapse
I am having the same issue with 9.0.2 OOS. So not sure if this us a compatibility issue with more than 1-2 years old vehicles or something else? Glad to hear that OB7 is working fine for you. Hope fix is coming soon. It's simply annoying.
I am having car connection issues as well. I have a 2010 Ford Edge. Just moved from Sony Xperia XA1 Ultra on Orea to my first OP device - OP6 Pie 9.0.2 - I can connect to my car initially but once I turn off my car, I have to go through a series of reconnect steps. I called tech support and we spent about 45 min troubleshooting - of course I was told I was the only one who had complained of this issue - anyway no resolution. The only way I can "reconnect" is to go into my car's system settings and select "connect to BT device" then toggle bluetooth off and on in the phone - sometimes this works with the first go, other times I have to repeat this cycle 5 or 6 times. Simply selecting "previously paired devices" in the phone app doesn't work either.
Really a pain in the tush, because I am usually in a hurry and don't have time to go through all this scenario to get a connection.
On the other hand, I have a bluetooth ear piece (made by Samsung that is like 5 or 6 years old) that reconnects every time I turn it on, no problems.
Car connections too but was not present in omni
I found for stock, performing a network reset (mobile, wifi Bluetooth) then restarting the device fixed the Bluetooth connection issue.
For custom non-stock ROMs, for my issue at least, I found its not a Bluetooth issue at all but rather the mobile network drops and the car Bluetooth cannot reconnect. The same network reset as above does not work but what does work is toggle off the "automatically select network" and manually select the mobile network from the menu that pops up. This keeps the mobile network intact (until the next device reboot, at which point repeat the steps) with the car and all is good.
I only figured it out by accident; hope this helps others.
So as the title says.....
I have a OnePlus 7 pro paired to a Samsung Galaxy active 2 watch. I love both devices BUT many times when I'm driving and using my Android auto head unit and I make or receive calls it usually has 3 options phone, speaker phone, and Bluetooth. If I let it use Bluetooth, it will *usually* go to my watch and not my Bluetooth audio for Android auto
I just want to be clear, it's a pioneer 4200nex head unit, not the Android auto app
I am rooted and have made a profile that is if connected to my head unit Bluetooth then it should disconnect from the watch and kill the watch app (tried with and without the killing the app part) all to no avail
I'm so confused, other than literally turning off Bluetooth on my watch to drive, (which kills battery because then it goes to 4g) is there anything I can do to make the head unit Bluetooth default for calls when connected?
I upgraded to s22 ultra from s21. When I get into my car my Bluetooth pairs with my phone for CALLS automatically, however not for AUDIO (both connect on its own once in a while) . I have to manually go into Bluetooth settings and switch on manually. This is annoying since I have a job where I'm in and out of my car. This was never an issue with my previous phone (S21)
Things I have tried but no luck.
In Bluetooth app settings clear data.
In Bluetooth app setting unpair and delete every device in memory.
In Bluetooth agent setting - change battery saving mode to unrestricted from optimized
Hmmm that seems strange.. Maybe try making sure auto is checked in the bluetooth seetings. I have the same phone and I'm not experiencing audio issues.
maybe try running a routine for the bluetooth
There is definitely something wrong with BT in the latest firmware. I occasionally get volume drops and those are huge drops. This bug happened in one or two previous firmware too, got sorted out, but in the latest there is it again. I hope it will be fixed ASAP.
Is it a Ford ?
You have to manually select the phone in Source to play audio or anything else.
Calls take priority over any setting, so they work always without an issue.
JazonX said:
Is it a Ford ?
You have to manually select the phone in Source to play audio or anything else.
Calls take priority over any setting, so they work always without an issue.
Click to expand...
Click to collapse
It's an aftermarket Bluetooth added to an old Honda via peripheral plugged into the stock cd player unit. I am going to try and disconnecting the battery terminals for 30 mins so I can reset the Bluetooth unit itself.
When I have my car bluetooth device connected as "audio" only, then I have to manually connect to it from my phone.
When I have my car bluetooth device connected as "audio & calls" , then the s22 ultra connects automatically
I recall reading that audio+calls connects automatically
Audio only requires manual connection
I drive a 2017 Ford F150 but I think its not a Ford issue