Hey Guys -
I've had my Gear S2 for a few months now and even though I enjoy it, have a nagging issue I can't seem to fix. I've searched everywhere and tried a few things, but no luck.
My Issue
My Gear S2 is obviously connected to my phone via bluetooth most of the time. If / when I power on my headset (M 165), it does not work as phone still goes to the Gear S2. In Bluetooth Settings, it shows both connected, but the M165 says "(No Phone) behind it. The only way I can use the headset is if I turn off bluetooth on my Gear S2. The same thing happens when I connect to my car's bluetooth as it says "No Phone" too. (see attached screenshot)
What I've Tried
- Disabling "Phone Audio" for the Gear S2: When I do this, the watch disconnects from BT. When I reconnect it, Phone Audio is enabled again
- Bluetooth Auto Connect: I installed this and set the Gear S2 to enable everything but Media and Call audio then set the headset to have only those two enabled. Didn't make a difference when testing as things still connected the same way
- Tasker: I've tried using a variety of plugins to get things to connect correctly, but still no go
Specs
- Phone: HTC One A9 / Marshmallow 6.0.1 / Rooted / s-off
- Watch: Gear S2 / Latest Firmware
- Headset: PLT_M165
Any suggestions? Am I perhaps using Bluetooth Auto Connect wrong? Thanks!
Have you tried another Bluetooth headset? I recommend you to try it if you didn't. I am not experiencing this issue and here is my setup:
I have Note 5 with latest Android 6.0.1 available.
Gear s2 (3g/4g model from T-Mobile) with latest firmware available.
I have Jawbone ERA (few year old model)
I also have Plantronics Legend
When watch is connected to my phone and then I connect any of the above Bluetooth headsets to my phone, then I am able to make/received calls on the headsets and in Bluetooth settings I see "phone" where as your pictures show as "no phone".
How did you connect your watch to your phone by just pairing via Bluetooth or through Gear Manager app?
I have this same issue with my Pixel 2XL it seems that having a samsung phone fixes this issue but any other android phone will exhibit this issue. if you disable phone call audio to the watch everything else will work properly. but you cannnot take calls on the watch.
Has anyone found a better fix then this???
Related
Hi, I recently flashed my phone (Galaxy Note 3) with CM 11 and my Galaxy Gear with null_23.
I connected the two of them via Bluetooth and everything seemed to work perfectly, until someone called me...
That was when I noticed that my phone forwards my audio to my gear speakers as it counts equivalently to any bluetooth earpiece. I tried unchecking Phone audio profile in bluetoth device settings but that completely disconnects my gear. (I should probably also mention the reason I want them connected is cause I'm using Bluetooth tethering for internet access on my gear).
I tried using an app I found called SoundAbout that forced audio device but it did so by (unchecking phone audio profile?) disconnecting the gear entirely.. which is not preferable.
I have been trying to search around for any info on how to do this, but all I've ever found has been to do the opposite, force bluetooth over other outputs.
Currently I have to change the output manually every time I answer/call someone, which takes a few sec where the other party wonders why I'm not responding..
I thought I would be able to change default phone audio output in my phone app or something, but no, no such setting is available.. its frustrating to be stuck with so little customisation even after invreasing it with a custom ROM... dang..
Thanks for any help!
Hey Guys -
I've got an issue I can't solve. My primary device is an HTC One A9 (rooted/s-off). Below are the Bluetooth devices I use daily and the profiles I use for each:
- Car: Phone, Media (Audio)
- S2 Watch: Phone, Data
- Headset: Phone
As the watch is connected most of the time, the phone connects to it even if the other two are connected.
Basically, I want to prioritze the devices so that that...
1. If all 3 are connected, the car is used for phone
2. If Headset and watch are connected, the headset connects for phone
etc...
I've tried Bluetooth Auto Connect, but despite configuration can't get this working. I use Tasker for many things, but not sure if it's best solution
Any ideas or apps which could easily do this?
Sent from my HTC One A9 using XDA-Developers mobile app
Hi.
Just got my S8 and tried to pair it to my Gear S3. All goes fine and both stay connected until I disable the watch audio function in the S8 bluetooth options (to not conflict with my car handsfree system).
After that, they just disconnect and don't connect anymore.
Any help out there?
Thanks!
Choose connect to another phone. Gear watch will ask you to light reset, after that you can reconnect your device to the phone. All your downloaded apps will be deleted on gear watch, but you can reinstall them.
Hi everyone,
I've been having an issue off and on for months and it's really starting to drive me crazy. I've got a Gear S2 Classic with 3G and a Google Pixel on Android O.
At random intervals when the Gear S2 is connected, the phone gets confused as to what to do with audio - If I try making a voice call using my handset, no audio comes from the phone OR from my watch. The same happens if I receive a call and I try answering on the handset - it'll connect, but I can't hear audio, and the other party can't hear me.
At the same time, audio will play out of my phone - but not out of a wired headset if I plug one in.
It's certainly related to the Gear S2 - if I remove the Gear S2 plugins from my phone and restart, everything works fine, including Bluetooth headsets - but I can't, for the life of me, come up with a solution to the problem.
Restarting the phone in safe mode also tends to do the trick, but only as long as the Gear's not connected.
Has anyone else experienced this?
Hi everyone,
Could you guys answer me this: Is the Gear S3 supposed to disconnect the bluetooth connection to my phone every 2 minutes or so? I can't get it to stay connected no matter what i try. I need to reboot my phone everyday because if i don't.. it won't connect at all.
After the reboot everything seems good and i can connect the gear through the Gear app. it only keeps disconnecting every 2 minutes... I've contacted Samsung about this and they told me that the bluetooth version on my phone was insufficient. They suggested i upgraded my phone from an Oneplus one to a Galaxy S8. I bought a Oneplus 5T instead but the problem remains. After i contacted Samsung for a second time they told me that's its probably a hardware related issue. Sounds unlikely to me since rebooting the phone allows me to connect to the watch.
Anyone having the same problem?
anyone?
no problems here, using oneplus 3T (so not the 5T) (On beta OS: A3003_28_180112) and gear s3 frontier on 3.0.1
jbrugger said:
no problems here, using oneplus 3T (so not the 5T) (On beta OS: A3003_28_180112) and gear s3 frontier on 3.0.1
Click to expand...
Click to collapse
Hmm ok. I think it's really weird i need to restart my phone every morning in order to connect to the phone.. Makes no sense
I am experiencing a similar issue with my 5T and Gear S3. Sometimes all the system sound (not multimedia ones though) are being routed to the ear speaker instead of the multimedia speaker. I missed an alarm several times. The fix for me is the same - to toggle BT connection with Gear S3.
I have lockscreen sounds enabled. So, I realize the issue reproduces when the lockscreen sound starts to be very quite and is being emitted via the ear speaker.
Another issue with the Gear S3 I am experiencing is as follows. If I start Google Play Music on my phone, Gear S3 does not see the player is started. Anyway I can start the player from the watch. Also, if I toggle the BT, everything works perfectly. Could you check this on your side as well?
I had a similar situation, the Gear S3 was disconnecting very often. In the end, I found that it was the battery saving settings on my N8 Sirocco that killed the connection to my Gear S3. I turned settings and blacklist off, and now it stays connected.