Related
Hello all, I've been trying to root my Droid Maxx 4.4.4 SU6-7 and was working fine until after bricking it, I was unable to run the RUN_Root.bat. I'm running Windows 7 64 bit. This is the error I would get in the command prompt after trying to run RUN_Root.bat .
C:\Python27>python qdloadRoot.py MPRG8960.bin -ptf _root/partitions.txt
QDLoad utility version 1.2 (c) VBlack 2014
Found TTY port: com9
Requesting Params...
Params:
Version: 8
Min version: 1
Max write size: 1536 (0x00000600)
Model: 144
Device size: Invalid or unrecognized Flash device, or Flash device programming not supported by this implementation
Device type: Intel 28F400BX-TL or Intel 28F400BV-TL
Requesting SoftwareVersion...
Version: PBL_DloadVER2.0
Requesting SerialNumber...
Serial number: 00,00,48,03
Requesting HW Id...
HW Id: 00,00,48,03,e1,10,7e,00
Requesting PublicKey...
PublicKey: 39,c4,ee,3e,b5,be,eb,87,8e,2f,e3,b8,53,4d,14,6f,91 ,ca,fd,bb,94,2a,0d,aa,d0,1e,b0,87,62,d4,b9,b8
Uploading file 'MPRG8960.bin' to addr 0x2a000000...
Executing...
Could not find Qualcomm device in Emergency download mode
Done, with errors!!!
C:\Python27>pause
Press any key to continue . . .
I can still use the USB I think. I see Qualcomm HS-USB Loader 9008 (COM9) in the device manager whenever I would plug in the USB and it was manually updated after I selected x64 folder from the windows_drivers_QHSUSB_DLOAD folder(windows would say it was up to date when selecting x64 folder). I tried different ports but the Port otion never shows up for them in the device manager. I'm also not using USB 3.0.
I believe I followed every other instruction as far as I know from this thread http://forum.xda-developers.com/droid-ultra/general/droid-mini-maxx-ultra-root-pogress-100-t3071609 I'd really appreciate if someone could help me out.
Phoop said:
Hello all, I've been trying to root my Droid Maxx 4.4.4 SU6-7 and was working fine until after bricking it, I was unable to run the RUN_Root.bat. I'm running Windows 7 64 bit. This is the error I would get in the command prompt after trying to run RUN_Root.bat .
C:\Python27>python qdloadRoot.py MPRG8960.bin -ptf _root/partitions.txt
QDLoad utility version 1.2 (c) VBlack 2014
Found TTY port: com9
Requesting Params...
Params:
Version: 8
Min version: 1
Max write size: 1536 (0x00000600)
Model: 144
Device size: Invalid or unrecognized Flash device, or Flash device programming not supported by this implementation
Device type: Intel 28F400BX-TL or Intel 28F400BV-TL
Requesting SoftwareVersion...
Version: PBL_DloadVER2.0
Requesting SerialNumber...
Serial number: 00,00,48,03
Requesting HW Id...
HW Id: 00,00,48,03,e1,10,7e,00
Requesting PublicKey...
PublicKey: 39,c4,ee,3e,b5,be,eb,87,8e,2f,e3,b8,53,4d,14,6f,91 ,ca,fd,bb,94,2a,0d,aa,d0,1e,b0,87,62,d4,b9,b8
Uploading file 'MPRG8960.bin' to addr 0x2a000000...
Executing...
Could not find Qualcomm device in Emergency download mode
Done, with errors!!!
C:\Python27>pause
Press any key to continue . . .
I can still use the USB I think. I see Qualcomm HS-USB Loader 9008 (COM9) in the device manager whenever I would plug in the USB and it was manually updated after I selected x64 folder from the windows_drivers_QHSUSB_DLOAD folder(windows would say it was up to date when selecting x64 folder). I tried different ports but the Port otion never shows up for them in the device manager. I'm also not using USB 3.0.
I believe I followed every other instruction as far as I know from this thread http://forum.xda-developers.com/droid-ultra/general/droid-mini-maxx-ultra-root-pogress-100-t3071609 I'd really appreciate if someone could help me out.
Click to expand...
Click to collapse
Besides manually update the driver.
First, you have to disable the mandatory use of signed drivers in Windows.
Why? The driver you are trying to install (or update) is not signed and windows by default only allows the use of signed drivers.
Search a tutorial on "how to install an unsigned driver Windows 7"
I send you some, but I am the translator of google lol ..
I had a similar problem for the driver and the solution I gave you, solved my problem.
The best of luck, a big hug!
I managed to fix my problem yeasterday following br0adband advice in this thread http://forum.xda-developers.com/showpost.php?p=62651329&postcount=1159 sorry I forgot to close my thread(if I can figure out how). Thanks for that helpfull tip though, I'll keep that in mind for later driver issues.
Xiaomi mi4 received no USB driver
Xiaomi mi4 not recognize the USB driver, .....
I have installed many drivers still fail Xiaomi
*
on PC will not have a yellow bug control usb .....
please help my
That Other Devices/USB Device is read only mass storage drive with Xiaomi drivers, Properties/Details/Hardware ids should be USBSTOR/Other*. I think it works as expected with official stable roms, but not on developement ones.
You have other drivers correctly installed, no need to worry about that one.
Install Mi pc suite. It wil download the drivers automatically. http://pcsuite.mi.com/
This doesnt work, once you are on a non stock rom Mipc suite wont recognize the phone either unfortunately
I've owned an MTK6572 based smart-phone in the past (Karbonn-A35) and found the SPFlashTool and MTKDroidTool extremely useful. The former is used for flashing stock/custom ROMs and the latter for taking backups, viewing partition blocks, rooting and a variety of other stuff.
Now, I've got a new Xiaomi Mi Pad and couldn't wait to do the same on that one! So, I'd like to know more about this chipset family (Nvidia Tegra), how is the developer support compared to the MTK65xx family here? Most importantly, can you tell me any tools to perform the following on my Mi Pad:
1. Root and take the ROM backup.
2. View Partition blocks (like /system, /data, etc.) and extract the MBR/EBR1, etc. from device.
3. Flash a ROM to the device.
prahladyeri said:
I've owned an MTK6572 based smart-phone in the past (Karbonn-A35) and found the SPFlashTool and MTKDroidTool extremely useful. The former is used for flashing stock/custom ROMs and the latter for taking backups, viewing partition blocks, rooting and a variety of other stuff.
Now, I've got a new Xiaomi Mi Pad and couldn't wait to do the same on that one! So, I'd like to know more about this chipset family (Nvidia Tegra), how is the developer support compared to the MTK65xx family here? Most importantly, can you tell me any tools to perform the following on my Mi Pad:
1. Root and take the ROM backup.
2. View Partition blocks (like /system, /data, etc.) and extract the MBR/EBR1, etc. from device.
3. Flash a ROM to the device.
Click to expand...
Click to collapse
Read this http://http.download.nvidia.com/tegra-public-appnotes/flashing-tools.html
But will it work on MiPad?
[email protected] said:
Read this http://http.download.nvidia.com/tegra-public-appnotes/flashing-tools.html
Click to expand...
Click to collapse
Thanks, but is this known to work on the Xiaomi Mi Pad?
prahladyeri said:
Thanks, but is this known to work on the Xiaomi Mi Pad?
Click to expand...
Click to collapse
Its known to work on tegra chipsets but I can't confirm for your phone.don't expect everything to be simple as sp flash tool for mt65xx.its better you download fastbooot drivers for your phone and a flashing tool(there's a miui flashing tool).enable fastboot mode on your phone and start flashing ROMs.http://en.miui.com/thread-27463-1-1.html
Just get in the know of fastboot mode and you'll be fine.
Please link for ZTE K3DX-V5G firmware.
ZTE K3DX-V5G firmware
Why do you need ZTE K3DX-V5G firmware?
Is there something wrong with your device?
Do you recommend buying the ZTE K3DX-V5G?
The brand name is V5 or ZTE or Guan or Mango.
It is the same device, manufatured by V5 and sold by ZTE, Guan and Mango.
Guan K3DX-V5G
https://deviceatlas.com/device-data/devices/guan/k3dx-v5g/28213760
BangGearWatch | ZTE V5G-K3DX
https://www.banggearwatch.com/pricetracker/zte-v5g-k3dx-5-5-inch-3gb-1369255/
The price was €64 at BangGood, for a short time.
The price was €70 at MyeFOX.
V5 K3DX-V5G 3GB RAM 32GB ROM Qualcomm Snapdragon 617 1.5GHz Octa Core FHD Display 5.5 inches Android 5.1 4G LTE Smartphone
https://www.myefox.fr/telephones/v5...a-core-fhd-ecran-55-pouces-android-5-g-223880
K3DX-V5G supports naked-eye 3D and eye-tracking.
It has a K3DX display with column interlaced mode.
Therefore is fully compatible with PhereoRol3D app.
https://github.com/JackDesBwa/PhereoRoll3D
Get the latest release here
https://github.com/JackDesBwa/PhereoRoll3D/releases
Have you tried PhereoRol3D ?
BootStomp and DR.CHECKER
Your phone has a locked bootloader.
You need to run these two tools: DR.CHECKER and BootStomp.
DR.CHECKER : A Soundy Vulnerability Detection Tool for Linux Kernel Drivers.
It is a single script!
This repo contains all the sources, including setup scripts. Now with an Amazing UI to view the warnings along with corresponding source files.
https://github.com/ucsb-seclab/dr_checker
BootStomp
https://seclab.cs.ucsb.edu/academic/publishing/#bootstomp-security-bootloaders-mobile-devices-2017
Did you manage to root ZTE K3DX-V5G ?
Partitions table
Get an excellent partitions table of ZTE K3DX-V5G
This format is ideal for recovery.
Device Info HW
https://play.google.com/store/apps/details?id=ru.andr7e.deviceinfohw&hl=en_US
NOTE - Find attached the partitions table of SuperD D1 (SuperD C1001). It is another device with Naked-eye 3D and eye-tracking.
Do you own a ZTE K3DX-V5G ?
You do not own a ZTE K3DX-V5G, do you?
V5 K3DX V5G Smartphone Unboxing (3D Video Camera)
https://www.youtube.com/watch?v=KkQhQszdSYs
Mango K3DX-V5G
https://v.youku.com/v_show/id_XMjgxMDI4OTcyOA==.html
3D Dongdong APP: Over 10,000 3D movies provided
http://en.k3dx.com/prolist/7/17.html
Thank you for many information about it.
I did not own it now due to it heat up too much compare with SD 625 / 636 phone.
Discussion V5 K3DX-V5G at russian 4pda forum
Discussion V5 K3DX-V5G
http://4pda.ru/forum/index.php?showtopic=944204
There is new firmware available from chinese versions (latest 1.3)
Firmware in China
http://www.shuajibao.com/rom/Zte/23777
Version 1.3 is not official. It is a custom ROM by this russian guy... Sidorovvitalik.
But development has already stopped because he is selling his ZTE V5 K3DX-V5G.
K3DX V5G stockrom
Please can someone upload the stockrom.
After scouring the internet for hours, I stumbled upon this post:
https://4pda.ru/forum/index.php?showtopic=944204&st=220
And guess what, I found the firmware for the device! Eventually, I was able to fix my bricked K3DX V5G, and here it is:
https://yadi.sk/d/TSjrTYbKBV4KWA
What I did was:
1. Decompressing the file
2. Flashing it with fastboot
3. Device resurrected!
Fastboot commands:
Code:
fastboot flash:raw boot boot.img
fastboot flash system system.img
edit: found out that it is a clone of ZTE v5 pro N940SC
Ma'am/Sir. Can i ask what usb driver did you use to detect your k3dx-v5g? Because mine is not detecting. Thanks in advance.
Ma'am/Sir. Can i ask what usb driver did you use to detect your k3dx-v5g? Because mine is not detecting. Thanks in advance.
asce16 said:
Ma'am/Sir. Can i ask what usb driver did you use to detect your k3dx-v5g? Because mine is not detecting. Thanks in advance.
Click to expand...
Click to collapse
Are you on Linux or Windows?
Ma'am/Sir. What usb driver did you use to detect your k3dx v5g phone? I cant find compatible to mine, my pc cant detect my k3dx v5g phone. Plsss. Send link. Thanks in advance.
B83C said:
Are you on Linux or Windows?
Click to expand...
Click to collapse
Window.
B83C said:
Are you on Linux or Windows?
Click to expand...
Click to collapse
Also ma'am/sir. can i ask a little favor? Can you send me full guide how to flash this file. Plssss
asce16 said:
Also ma'am/sir. can i ask a little favor? Can you send me full guide how to flash this file. Plssss
Click to expand...
Click to collapse
Hmm well, have u tried peeking at the device manager when you phone is connected to your PC in fastboot mode?
If there's an entry showing your device you will need grab a fastboot binary to flash the firmware.
Here's a link to the tool called minimal ADB and Fastboot: here
You will also need to extract the firmware to somewhere in your drive.
Having done all the extraction and installation,
and since you're on Windows, you should do:
Bash:
\path\to\fastboot flash:raw boot \path\to\boot.img
\path\to\fastboot flash system \path\to\system.img
where \path\to\fastboot points to the path where you have extracted/installed the tool (or if you have added its path to the PATH environment variable, you can avoid the hassle to write the full path), and \path\to\boot.img and system.img points to absolute path of the extracted firmware.
Then, you are good to go!
B83C said:
Hmm well, have u tried peeking at the device manager when you phone is connected to your PC in fastboot mode?
If there's an entry showing your device you will need grab a fastboot binary to flash the firmware.
Here's a link to the tool called minimal ADB and Fastboot: here
You will also need to extract the firmware to somewhere in your drive.
Having done all the extraction and installation,
and since you're on Windows, you should do:
Bash:
\path\to\fastboot flash:raw boot \path\to\boot.img
\path\to\fastboot flash system \path\to\system.img
where \path\to\fastboot points to the path where you have extracted/installed the tool (or if you have added its path to the PATH environment variable, you can avoid the hassle to write the full path), and \path\to\boot.img and system.img points to absolute path of the extracted firmware.
Then, you are good to go!
Click to expand...
Click to collapse
Ma'am/sir. Thanks, it's fix now. Thanks for the help. Godbless and stay safe.
Hello, in case you are looking for a twrp image for the device, here's one I have ported myself:
TWRP_N940Sc_V3
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
B83C said:
Hello, in case you are looking for a twrp image for the device, here's one I have ported myself:
https://www.mediafire.com/file/0547s4g8hdojctq/TWRP_N940Sc_V3.img/fileTh
Click to expand...
Click to collapse
Thankyou! Uhm is there any custom rom? Can you please port a custom rom or upload please i really need it[/url]
John072021 said:
Thankyou! Uhm is there any custom rom? Can you please port a custom rom or upload please i really need it[/url]
Click to expand...
Click to collapse
I regret to tell you that, no. Currently I have been using the phone as a debian server, since the LCD has been inadvertently broken ( I exerted too much force on it ). Moreover, the device doesn't recognize its battery, which suggests that I might have broken some part of it. Therefore, I have kinda lost any hopes for it. Plus, my linux machine is not powerful enough to build an android OS ( what do you expect much from an intel celeron? ).
PS: I might do it once I get my hands on a much powerful one, or maybe a powerful enough VPS? I am not quite sure but currently I am still in high school, meaning that I may or may not have time....
Best regards,
B83C
the miflash unlock too does not recognize the phone ( and yes I have done all other steps of creating an account, tying a phone number,phone is logged in with the miaccount, updating it to 6.5.224.4 ,putting phone to fastboot enabling developer options)
fastboot devices also does not turn up with anything because I do not have any drivers installed ( nowhere in website it says i need to manually find drivers but i am assuming that is the issue because in device manager it says no drivers installed )
how do i install drivers ? where do I find them ? after googling a little I couldn't find anything official in qualcomm website or poco xiaomi website my old phone was an intel one and installing drivers was as easy as going to the official intel website and downloading them
if someone can point me in the right direction i'd be glad
Unlock bootloader first. It takes one week (168 hours) to be accepted by xiaomi.
Thank you for your reply but have you read anything i wrote
Try to check this Guide.
hellokelly said:
the miflash unlock too does not recognize the phone ( and yes I have done all other steps of creating an account, tying a phone number,phone is logged in with the miaccount, updating it to 6.5.224.4 ,putting phone to fastboot enabling developer options)
fastboot devices also does not turn up with anything because I do not have any drivers installed ( nowhere in website it says i need to manually find drivers but i am assuming that is the issue because in device manager it says no drivers installed )
how do i install drivers ? where do I find them ? after googling a little I couldn't find anything official in qualcomm website or poco xiaomi website my old phone was an intel one and installing drivers was as easy as going to the official intel website and downloading them
if someone can point me in the right direction i'd be glad
Click to expand...
Click to collapse
It sounds like you need the adb drivers installed. Have a look here and see if that helps.
Xiaomi Poco X3 ADB Driver, PC Software & User Manual Download
Here, we provide free Xiaomi Poco X3 ADB Driver, PC Software & User Manual Download with single click on the download link below.
www.xiaomidriversdownload.com
That website failed to give me the drivers nothing happens when I click download / not to mention that it looks like one of those auto-generated spam websites to trick search engines to get clicks and push dubious phishing software and ads to unsuspecting users I think you should remove that link.
but I managed to fix my issue quickly after searching a bit more and looking at a youtube video where a guy came across the same problem I experienced
Can a mod here and or someone in lineageOS website change the
tutorials or guides or add additional info ?
DOWNLOAD THE MI UNLOCK TOOL is a bit misleading , because the newest version of the miunlock tool 6.5 and the version you download 5.5 etc.. when you click on download
https://en.miui.com/unlock/download_en.html on this webpage
DOES NOT CONTAIN ANY DRIVERS you have to find the older versions by clicking FAQ and going here :
https://c.mi.com/thread-2262302-1-0.html
and download 4.5 and lower because the driver_install.exe file
DOES NOT EXIST in the newer versions of the tool which creates the problem I am having.
Xiamoitool V2
GitHub - francescotescari/XiaoMiToolV2: XiaomiTool V2 - Modding tool for xiaomi devices
XiaomiTool V2 - Modding tool for xiaomi devices. Contribute to francescotescari/XiaoMiToolV2 development by creating an account on GitHub.
github.com
at this github page also supposed to work and install drivers but I have not used it.