Related
I am still working on the thread
After the development of the AOSP for the mate 7 hit the wall I made this thread to gather the developers efforts to make this dream come to life
What we have here is a astock rom for the mate 7 all that it need is some rebooting or crashing bugs only lefted all we need is agood devoleper or two and some time for them and it can be completed
I stepped the first step to learn development but not even a close to give help
Any one can ask for help from a developer or can fix some bugs will be a great help
We have 4 places or more to ask for developers help in
Xda site and Huawei club site in both Huawei mate 7 and honor 6 section
The original thread link is down below
https://forum.xda-developers.com/mate-7/orig-development/rom-aosp-ascend-mate7-t3465656
Introduction
This project was done by gabry3795, acbka and the TheLolageMann
Source Code: https://github.com/mt7-dev/
Please note that it's a beta release and it's not intended for daily use because some important part is not working and it's unstable. So flash only if you want to test and contribute to this project.
Images
You can find images of the first build here and for current builds under the Screenshot Tab.
Installation Instruction
obviously your bootloader must be unlocked
Extract the .7z archive
Update your stock Huawei firmware to the latest version B571 - Android 6.0
Flash a custom recovery, I suggest you this twrp
Do a Factory Reset from recovery: Wipe » Swipe for Factory Reset
Boot in bootloader mode - Plug USB cable to your pc, hold Volume Down and Power button pressed. When a blank screen appears release them
From pc, by using fastboot, flash boot and system images
Code:
fastboot flash boot boot.img
fastboot flash system system.img
Reboot!
The easiest way to flash via fastboot is to
1- put the two files system and boot in any folder in your pc
2- when you are in the folder click on shift from the keyboard and while holding it right click anywhere
3- chose " open command Window here"
4- write "fastboot" and click inter
5- if you can see your device in the list you can flash the rom now by writing the two codes up one by one
6- after you finish you can start your PHONE now
Changelog
You can find changelogs here on github, every file will be named as the version released with many informations about the release.
Downloads
Again the release section of github repo. for MT7-L09 , it works on MT7-TI10 BUT with more crashes and worked with honor 6 after some prop editing to the cpu clock speed
MT7-L09 and MT7-TL10
Releases page, direct links below:
[2016/09/20] v0.1.0beta - Changelog | Download
[2016/10/05] v0.2.0beta - Changelog | Download
[2016/10/05] v0.2.2beta - Changelog | Download
V 0.2.2 is the latest with the GBs fix by TheLolageMann
Note for this version: After installing GApps you have to enable all permissions to them by going to Settings -> Apps -> Select Gapps and Google Play Services -> Permissions -> Enable all permissions.
XDA:DevDB Information
AOSPfortheMate7, ROM for the Huawei Ascend Mate 7
Contributors
gabry3795, acbka And TheLolageMann
Source Code: https://github.com/mt7-dev/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: v0.2.2
Beta Release Date: 2016-09-20
Created 2016-09-20
Last Updated 12-02-2017
mhmedahmed1996 said:
I am still working on the thread
After the development of the AOSP for the mate 7 hit the wall I made this thread to gather the developers efforts to make this dream come to life
What we have here is a astock rom for the mate 7 all that it need is some rebooting or crashing bugs only lefted all we need is agood devoleper or two and some time for them and it can be completed
I stepped the first step to learn development but not even a close to give help
The original thread link is down below
https://forum.xda-developers.com/mate-7/orig-development/rom-aosp-ascend-mate7-t3465656
Introduction
This project was done by gabry3795, acbka and the TheLolageMann
Source Code:https://github.com/mt7-dev/
Please note that it's a beta release and it's not intended for daily use because some important part is not working and it's unstable. So flash only if you want to test and contribute to this project.
Images
You can find images of the first build here and for current builds under the Screenshot Tab.
Installation Instruction
obviously your bootloader must be unlocked
Extract the .7z archive
Update your stock Huawei firmware to the latest version B571 - Android 6.0
Flash a custom recovery, I suggest you this twrp
Do a Factory Reset from recovery: Wipe » Swipe for Factory Reset
Boot in bootloader mode - Plug USB cable to your pc, hold Volume Down and Power button pressed. When a blank screen appears release them
From pc, by using fastboot, flash boot and system images
Reboot!
The easiest way to flash via fastboot is to
1- put the two files system and boot in any folder in your pc
2- when you are in the folder click on shift from the keyboard and while holding it right click anywhere
3- chose " open command Window here"
4- write "fastboot" and click inter
5- if you can see your device in the list you can flash the rom now by writing the two codes up one by one
6- after you finish you can start your PHONE now
Changelog
You can find changelogs here on github, every file will be named as the version released with many informations about the release.
Downloads
Again the release section of github repo. for MT7-L09 , it works on MT7-TI10 BUT with more crashes and worked with honor 6 after some prop editing to the cpu clock speed
MT7-L09 and MT7-TL10
Releases page, direct links below:
[2016/09/20] v0.1.0beta - Changelog | Download
[2016/10/05] v0.2.0beta - Changelog | Download
[2016/10/05] v0.2.2beta - Changelog | Download
V 0.2.2 is the latest with the GBs fix by TheLolageMann
Note for this version: After installing GApps you have to enable all permissions to them by going to Settings -> Apps -> Select Gapps and Google Play Services -> Permissions -> Enable all permissions.
XDA:DevDB Information
AOSPfortheMate7, ROM for the Huawei Ascend Mate 7
Contributors
gabry3795, acbka And TheLolageMann
Source Code:https://github.com/mt7-dev/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: v0.2.2
Beta Release Date: 2016-09-20
Created 2016-09-20
Last Updated 12-02-2017
Click to expand...
Click to collapse
Thanks :good::good::good:
fazi2015 said:
Thanks :good::good::good:
Click to expand...
Click to collapse
Any one have any news about it can write it here
We can update the post with every news
Would it be possible for me to get a bug list for the current status of the project. Although I don't have the device I can definitely see if I could take a look at it. No promises though
There's still a way to get AOSP to the mate 7.
Last resort: Find a dev and pay him. On reddit r/android you could find devs. Perhaps if everybidy whos interested pays a minor fee, the dev is willing to help us.
https://www.reddit.com/r/Android/comments/69o2t8/huawei_mate_7_aosp_devs_wanted/
---------- Post added at 11:19 PM ---------- Previous post was at 11:12 PM ----------
WildfireDEV said:
Would it be possible for me to get a bug list for the current status of the project. Although I don't have the device I can definitely see if I could take a look at it. No promises though
Click to expand...
Click to collapse
First of all, thanks.
Second, There's a document on github which mentions bugs and you can find people mentioning bugs in the old thread: https://forum.xda-developers.com/mate-7/orig-development/rom-aosp-ascend-mate7-t3465656/page22
---
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SuperSU 2.82 for EMUI 5
Note: SuperSU 2.82 working on EMUI 5 but may not on EMUI 5.0.1 or 5.1
Here is updated SuperSU-2.82-SR5 for EMUI5.0.1
This will work (tested) on EVA (Huawei P9) - based on original SuperSU SR5 by @Chainfire
Download: https://www.androidfilehost.com/?fid=673956719939815322
MD5: b168a88bc815d3fac521ace97402a949
Older Versions here: (Thread will get general update soon)
SuperSU-2.82-EMUI5
Changelog: First 4 Versions based on original Chaifires SuperSU 2.82 code with mounting vendor and search for boot_a. These versions are without additional modification by phh superuser files/scripts
The second 3 Versions (a/b) - 09.06.2017 01:17- are mixed with phh superuser and original Chaifires SuperSU Code (same as 2.79 for EMUI): Download-Links below - for Firmwares before b38x and without loop support
Current Status: STABLE
NOTE: If your device has no Root - just flash it with the related TWRP for your device! - But if your device is rooted with previous Versions of SuperSU for EMUI, dont flash it over existing Root but make the steps written below "How do Root"
4 Versions based on original Chainfire SuperSU 2.82 code - 07.06.2017
Succesful tested on P9 b383, b386 and Mate 9, also working on Honor 6x BLN-B360 - but may work also on other devices from Firmwares b38x up and new Nougat Firmwares for Devices, which had Marshmallow until short time ago.
It will probably not work on other Firmwares before b38x (for these devices are the modified versions with mixed code from SuperSU and phh Superuser)
1) SuperSU-v2.82-EMUI5-SELEnforcing.zip
Just added init.d script, but let's SELinux as it is.
Download: https://www.androidfilehost.com/?fid=673368273298961353
MD5: 18529db8978a39212db335ad006760cf
2) SuperSU-v2.82-EMUI5-SELPermissive.zip
Added init.d script and set SELinux permanently to permissive (required for Viper4Android)
Download: https://www.androidfilehost.com/?fid=817550096634775861
MD5: 57a081ba3ba03691c4ffaf9ab141a44e
3) SuperSU-v2.82-EMUI5-KangV-Roms.zip
Added init.d script, SELinux Permissive, Script for K-Settings
Download: https://www.androidfilehost.com/?fid=817550096634775860
MD5: 5e68f7b1175f7b51d64802f7416a04f5
4) SuperSU-v2.82-without-additive.zip - try out, if none of the three above works (its without additional features, just Root)
Download: https://www.androidfilehost.com/?fid=961840155545571636
MD5: bfa6f458949f6deb056044b0337ef31a
3 Versions (a/b) mixed with original Chainfire SuperSU 2.82 code and pph superuser code - 09.06.2017
For devices which has no Loop Support yet, but working also on devices, which can succesful use Version 1, 2, 3 and 4.
Kirin 960 based Devices must use Version 6 a/b and 7
Following versions are not compatible with AOSPA based Roms.
5. Version comes in 2 editions (5a and 5b) - should work with devices which have fully working TWRPs - like P9
Version 5/a - Name: SuperSUv2.82-EMUI5-dm-verity-Enforcing.zip
DOWNLOAD UPDATED VERSION: https://www.androidfilehost.com/?fid=961840155545572192
MD5: 0da8bcbf0eb164c7512ae083012b45eb
About:
dm-verity and dm-crypt enabled
init.d Support
SELinux Enforcing
Version 5/b - Name: SuperSUv2.82-EMUI5-dm-verity-Permissive.zip
DOWNLOAD UPDATED VERSION: https://www.androidfilehost.com/?fid=817550096634776377
MD5: 14a0ac7fd3a725ee326e9944399a916e
About:
dm-verity and dm-crypt enabled
init.d Support
permanent SELinux Permissive
Version 5 (a/b) is working (tested) on:
Huawei P9
Huawei P9 Lite
Huawei Mate 8
Huawei Mate 9
Honor 8
Not working:
Huawei Honor 8 FRD-L09C432B380
Huawei P10 and P10 plus - must have noverity version
6. Version comes in 2 editions - for Kirin 960 based Devices like P10 and P10+ and should work with other devices which have NOT properly working TWRPs
Version 6/a - Name: SuperSUv2.82-EMUI5-noverity-Enforcing.zip
DOWNLOAD UPDATED VERSION: https://www.androidfilehost.com/?fid=889764386195906385
MD5: a37380d6f1659f78bbd341954ed804b2
About:
dm-verity DISABLED
init.d Support
SELinux Enforcing
Version 6/b - Name: SuperSUv2.82-EMUI5-noverity-Permissive.zip
DOWNLOAD UPDATED VERSION: https://www.androidfilehost.com/?fid=889764386195906386
MD5: 99f06e5fe34b93409d558fc119d15e59
About:
dm-verity DISABLED
init.d Support
permanent SELinux Permissive
Version 6 (a/b) is working (tested) on:
Huawei P10+
Huawei P10
Huawei Mate 9
Huawei P8 Lite 2017
Huawei Honor 8 FRD-L09C432B386
7. Version comes in 2 editions - special for KangV-ROMs on Kirin 960 based Devices.
Version 7/a - Name: SuperSUv2.82-EMUI5-dm-verity-KangV.zip
DOWNLOAD UPDATED VERSION: https://www.androidfilehost.com/?fid=745425885120739007
MD5: 8ca92c52a338fd82e923d0479769e23a
Version 7/b - Name: SuperSUv2.82-EMUI5-noverity-KangV.zip
Download for testing issues: https://www.androidfilehost.com/?fid=889764386195906387
MD5:0df87e5c4a5d41a0ed8b21085a33a6e8
About:
Version 7/a = dm-verity and dm-crypt enabled
Version 7/b = dm-verity disabled
init.d Support
script for K-Settings
script for busybox in /system/xbin
permanent SELinux Permissive
Version 7/a is working (tested) on:
KangV Roms
Huawei Mate 8
Huawei P9
Version 7/b is not tested yet!
PREVIOUS FINAL VERSION 2.81 - mixed code with chainfires and phh superusers - was working on most Huawei Devices:
https://www.androidfilehost.com/?w=files&flid=183923
How Do Root:A) You need unlocked Bootloader and the TWRP related for your device installed!
TWRP for Huawei P9 Nougat you can find here - with Decryption Support by Recognized Developer OldDroid: https://forum.xda-developers.com/p9/development/twrp-t3565703
B) Look into your settings: Developer options must be enabled and inside: ADB Debugging and USB Debugging, as well as in settings/advanced settings/security "Allow unknown sources" PC should have the driver installed for connecting Phone in Fastboot Mode.
C) Make a TWRP Backup of - boot.img - data - system -vendor - before flashing SuperSUfor EMUI 5 - if one version dont work on your Huawei Device as it should, restore original boot.img with TWRP and try one of the other versions.
Note: If your Phone is not rooted -just flash SuperSU 2.81 EMUI 5 and reboot - Phone boots up two times and with the second boot you come back to your homescreen with Root.
If your Phone is rooted und you want update SuperSU - dont flash over existing Root, do following steps:
1) Copy SuperSU-2.82.zip to your external SD
2) Make a Complete Unroot from SuperSU App!
3) SuperSU ask: "Should SuperSU restore original boot.img" - check YES (2 times)
4) Phone reboots - dont wait but in the moment your screen is black press VOL+ Button and hold it the whole time until you are booted to TWRP.
5) In TWRP go to install and select SuperSU 2.82, swype to install
6) Search on Homescreen for SuperSU App and open it - look if you're done - if yes =good
NEXT STEPS ONLY IF ROOTING WAS NOT SUCCESFUL OR IF SUPERSU APK CANNOT UNROOT OR RESTORE BOOT.IMG:
Flash original (unmodified) boot.img with Fastboot - or restore boot.img from the Stock TWRP Backup (boot) of same Firmware
- if restored from TWRP Backup, dont restart system, go back and - flash SuperSU
- if flashed instead with Fastboot - disconnect USB from Device and with Power and VOL+ boot to TWRP and flash SuperSU
Note 2: If you are own the SuperSU PRO Version - you have just to update the SuperSU-Pro.apk directly from SuperSU "Upgrade to Pro Version". You will redirected to Playstore, install the Update!
If your Phone has a Custom Rom like Nougat KangV Rom - you can try to flash over existing Root - if it dont work (its different: for most will work, for some not) you can do:
Unroot with following steps:
0) KangV Roms for Nougat come with prerooted boot.img. SuperSU 2.82 should be able to patch and update it - just try.
If the update fails it would be good to find (or have) the original unmodified boot.img for the Firmware on which Rom is based and restore this.
1) Look into your settings: Developer options must be enabled and inside: ADB Debugging and USB Debugging, as well as in settings/advanced settings/security "Allow unknown sources" PC should have the driver installed for connecting Phone in Fastboot Mode.
2) Copy SuperSU 2.82 EMUI 5 to your external SD
3) Open old or not properly working SuperSU and make a "complete Unroot" - when SuperSU ask you 2 times "Do you want to restore original boot.img" check: YES
Maybe it is successful - perhaps not - if yes:
4) Phone reboots - but it cannot reboot to system!!
5) Instead booting to system you come into Huawei eRecovery - just make SHUTDOWN.
Now same steps, if the restore of original boot.img was not succesful - you must restore original (unmodifiied) boot.img from Firmware. If you have a TWRP-Backup from unrooted original boot.img restore it and go to 8) - if you have not a TWRP Backup for restore - go to step 6)
6) Connect Phone with USB to PC and with Vol- and Power start Phone into fastboot mode.
7) Flash unmodified boot.img with Minimal ADB and Fastboot. Disconnect phone from USB.
8) Press VOL+ with the finger of your left hand and press it all the time and with the finger of your right hand press Power Button.
9) Phone boot up and soon as Huawei Logo is shown on screen, release the Power Button but stay pressing VOL+ the whole time until you are in TWRP.
10) Flash SuperSU 2.82 EMUI 5
11) Phone boots up now two times and will finally boot to system.
12) search for SuperSU on Homescreen - its not on your usual place, its somwhere else on homescreen - open it and you should have now clean SuperSU 2.82
Do this steps just, if you had problems with flashing 2.82
Please report if you rooted your device successful / not succesful - and give information about your Device-model, Build number, TWRP-Version (fully or not properly working, ist it able to mount data with f2fs, make backup and restore?...)
Credits:
@Chainfire - SuperSU
@CCMT - SuperSU Release
@phhusson - phh's SuperUser/ OpenSource SELinux-capable SuperUser
@OldDroid - TWRP for P9 Android 7 with Decryption Support
@ante0 - Mate 9 Development
@Telperion - Honor 8 Development
Thank you
Thanks for the great job.
how do you root it if it's still not rooted? I lost root when I upgraded to nougat and never found out how to get it back
Thanks for job, but 2.81 version is really works? Because the 2.79 is not fully good: there was 1 problem: doesn't delete system programs with the Titanium Backup.
kazshizka said:
how do you root it if it's still not rooted? I lost root when I upgraded to nougat and never found out how to get it back
Click to expand...
Click to collapse
You just need the right TWRP and then flash SuperSU zip, reboot phone without wipe of Dalvik /Cache
Which phone model to you have?
Shyciii said:
Thanks for job, but 2.81 version is really works? Because the 2.79 is not fully good: there was 1 problem: doesn't delete system programs with the Titanium Backup.
Click to expand...
Click to collapse
You need also a good busybox 1.26.2 - I always use the one from YashdSaraf (xda)
Tecalote said:
You need also a good busybox 1.26.2 - I always use the one from YashdSaraf (xda)
Click to expand...
Click to collapse
SuperSU must works without busybox. My friend modified the SuperSU version 2.79, and it works fully.
Tecalote said:
You just need the right TWRP and then flash SuperSU zip, reboot phone without wipe of Dalvik /Cache
Which phone model to you have?
Click to expand...
Click to collapse
My phone is a P9, Model is EVA L-19. So i need to flash TWRP first? I just used a one click program the last time I rooted it so I'm too sure how to do stuff
kazshizka said:
My phone is a P9, Model is EVA L-19. So i need to flash TWRP first? I just used a one click program the last time I rooted it so I'm too sure how to do stuff
Click to expand...
Click to collapse
You need this TWRP: https://forum.xda-developers.com/p9/development/twrp-t3565703
And after flash with this TWRP this SuperSU and you are rooted
If you don't know how to flash TWRP, search related Thread
Tecalote said:
You need this TWRP: https://forum.xda-developers.com/p9/development/twrp-t3565703
And after flash with this TWRP this SuperSU and you are rooted
If you don't know how to flash TWRP, search related Thread
Click to expand...
Click to collapse
Many Thanks!!!!
Shyciii said:
SuperSU must works without busybox. My friend modified the SuperSU version 2.79, and it works fully.
Click to expand...
Click to collapse
This SuperSU works fully - but we talked about TitaniumBackup and this would may work better with Busybox.
Root without Busybox is like a tree without leaves.
I have not tested yet, if SuperSU works in case of TitaniumBackup without Busybox.
But you can test it by yourself.
And if your friend make it better let him do this Job - but don't discuss with me about Busybox
Shyciii said:
Thanks for job, but 2.81 version is really works? Because the 2.79 is not fully good: there was 1 problem: doesn't delete system programs with the Titanium Backup.
Click to expand...
Click to collapse
I have the same issues but these might be unrelated to the most recent SuperSU version. I cannot uninstall system apps and I can't "frost" system apps in Titanium Backup (I have pro version).
Also some other root apps don't work correctly like:
https://play.google.com/store/apps/details?id=de.andip71.screenoff&hl=de
https://play.google.com/store/apps/details?id=com.goodmooddroid.gesturecontrol&hl=de
clouds5 said:
I have the same issues but these might be unrelated to the most recent SuperSU version. I cannot uninstall system apps and I can't "frost" system apps in Titanium Backup (I have pro version).
Also some other root apps don't work correctly like:
https://play.google.com/store/apps/details?id=de.andip71.screenoff&hl=de
https://play.google.com/store/apps/details?id=com.goodmooddroid.gesturecontrol&hl=de
Click to expand...
Click to collapse
I make some tests in the evening on Stock Firmware with this SuperSU and will report you how to do
For PRO SuperSU is one more information in OP (OP updated)
cant freeze apps?
Terminal:
su
setenforce 0
done
xtcislove said:
cant freeze apps?
Terminal:
su
setenforce 0
done
Click to expand...
Click to collapse
Good idea to set temporarily SELinux from Enforcing to Permissive. :good:
I made also second version of SuperSU 2.81 for EMUI 5, which enables SELinux durable to permissive.
But I didn't post it here.
I don't know if people would like to have this.
Tecalote said:
Good idea to set temporarily SELinux from Enforcing to Permissive. :good:
I made also second version of SuperSU 2.81 for EMUI 5, which enables SELinux durable to permissive.
But I didn't post it here.
I don't know if people would like to have this.
Click to expand...
Click to collapse
Give it to me
xtcislove said:
Give it to me
Click to expand...
Click to collapse
Okay, in the later evening. I am at work now (Job)
Soon I come home
Give me too
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
scaniathe said:
Give me too
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
Yeah, I will update Thread with both versions and Users can choose
This ROM can not be installed on Android 6.
The "way back" to EMUI 4 goes by official rollback.
[Custom ROM] [K-ROM V.2] Honor 6x (Berlin) BLN-L21C432B360 - EMUI 5 -Android 7
Based on Huawei firmware C432B360 and HRT_Kangvip B357.
My ROM has been developed and tested on this device:
Huawei Honor 6x - Premium - [BERLIN]
Model number: BLN-L21
EMUI 4 build number: NRD90M test-keys
EMUI 5 build number: BLN- L21C432B360
-OTA updated Free device, without branding, with root and TWRP Recovery 3.1.1
The following mods were integrated and activated:
- Autostart administration in the phone manager
- Call Recorder
- KangVip Advanced Settings
Should extensions or Xposed be added, will be updated immediately.
Whether the following instructions on Provider Branding is applicable,
I could not test and therefore advise against it.
The Rom was installed successfully on BLL-L21C185B361 (Middle East) from @--ahmed.
You need:
- PC or Windows tablet
- USB cable
- Windows 7 / 8.1 / 10
- Minimal Adb and Fastboot
- OEM unlocking active in the developer options
- Huawei HiSuite (installs all necessary drivers)
- USB debugging on. Back up your data using Huawei Backup.
The Rom is installed as if you wanted to restore a TWRP backup.
Before the ROM installation, please create a TWRP 3.1.1 backup for emergencies !!
Conditions for installation:
The firmware EMUI 5 / B360 (nougat) must be preinstalled. My ROM can not be installed on Android 6. Root is not necessary.
TWRP Recovery 3.1.1 (berlin311.img) is required.
OEM + FRP unlocked.
OEM Unlock and USB on in phonesettings.
TWRP installation is described here:
https://www.android-hilfe.de/thema/...test-keys-android-7-0-nougat-emui-5-0.834824/
The compressed file contained in the download package
2017-06.system.update.B360.k.rom.v.2.rar (1,008.1 MB) please unzip (do not download as zip). The backup file created in this way
2017-06.system.update.B360.k.rom.v.2 please copy to the ExtSd in the TWRP backup folder.
Installation:
Please do not make wipes. Do not delete the cache or dalvik cache. Also no other partition and also no Factoryreset to perform. Later, this is feasible.
In TWRP now my backup restore and reboot.
All partitions; lease do not part recovery.
Your applications, with data and settings, are retained.
If TWRP wants to root, please refuse the request.
Now the ROM installation is complete. An additional installation of SuperSu and BusyBox is not necessary. Both were integrated And configured. There are comprehensive reading and writing rights.
The ROM is partially debloated. Some Google Apps have been removed. They can be installed by you if necessary. You can do that, too Do well with the HiApp.
Please make regular backups. ...... and remember: A custom ROM is Never as perfect as a stock Rom. He has to teach him something.
Never update the app from SuperSu. If it does happen, immediately the app delete and install the SuperSu App from the download package.
Should you ever make a Factoryreset, updated before that Google Account.
Root, K-Settings and the OTA update capability will remain thereafter.
The Rom is to be used very well as a Rescue System. Because it has no data partition, it provides independently a new in the boot process , one if none exists.
Have fun ! I hope my bad English is clear enough. Sorry!
Download Package:
- 2017-06.system.update.B360.k.rom.v.2.rar
- berlin311.img - TWRP Recovery
- eu.chainfire.supersu.apk
- minimal_adb_fastboot_v1.4_setup.exe
Big thanks to: HRT_Kangvip,
@OldDroid, Chainfire, Stephen (Stericson) + Jmz Software, Team Win Recovery Project, and Huawei Technologies Co., Ltd 华为 技术 有限公司
German thread: https://www.android-hilfe.de/thema/...rlin-bln-l21c432b360-emui-5-android-7.835906/
NOTE: Despite careful elaboration, I can not guarantee that this manual will not cause damage to the device or operating system and therefore does not assume liability for any damage or malfunctions to the hardware and software! If you are still insecure, follow these steps: Do not run the instructions unless the conditions (model number, Android version, etc.) are applicable to you or your device. Read instructions carefully and completely, look up unknown terms. Check downloaded files for viruses. Make a backup of important settings and data. Do not follow the instructions if you do not know what you are doing.
Downloads:
Updates and development stopped. With Oreo we'll go on again! !
We need this ROM! Thank you!!
ChinHon said:
Hi, I have built a custom Rom for my 6x premium. It works with small errors. (Google sync) I will try it for a week. Must remove the small bugs. When the Rom is finished I will post it here. Of course, only if you want it.
It is for the most part stock. Some Googleware is frozen or removed. The known Kangvip settings are installed. As well as the Call Recorder and Viper. It is, like all my Roms for the Mate S, based on a TWRP backup file.
Click to expand...
Click to collapse
Waiting for links. :highfive:
Sent from my Honor 8 using XDA Labs
Screen shots
.......
.......
Gonna wait for links
ChinHon said:
This editor has never liked me. There is my german thread.
https://www.android-hilfe.de/thema/...21c432b360-emui-5-android-7-krom_b357.835254/
Click to expand...
Click to collapse
Any download links now man?
Sent from my Honor 8 using XDA Labs
,........
ChinHon said:
Does not appear before Sunday. The test is not finished yet. The newest Screenshots are there.
https://www.android-hilfe.de/thema/...i-5-android-7-krom_b357.835254/#post-10518141
Click to expand...
Click to collapse
We'll be waiting man.
Sent from my Honor 8 using XDA Labs
........
Very interesting. What toolchain are you using when you compile? I haven't been able to build my environment correctly yet using the OpenKirin source and gcc-linaro.
.......
ChinHon said:
I cannot publish it. EMUI 5 is encoded. I do not want which becomes unsafe the new system.
Click to expand...
Click to collapse
So it's discontinued?
what about BLN-L22
Ramesh006 said:
what about BLN-L22
Click to expand...
Click to collapse
It should work. If it ever gets published.
.......
.......
ChinHon said:
At the moment I am in New York. I am Sunday again back in Germany. Then I write the Tutorial and upload the Rom. It goes not without Tuto. I would absolutely like to prevent bricks.
Click to expand...
Click to collapse
So sunday is the day.
Sent from my Honor 8 using XDA Labs
.......
About the Android Open Source Project
Android is an open source software stack for mobile devices and a corresponding open source project led by Google. This site and the Android Open Source Project (AOSP) repository offer the information and source code needed to create custom variants of the Android stack, port devices and accessories to the Android platform, and ensure devices meet the compatibility requirements that keep the Android ecosystem a healthy and stable environment for millions of users.
BUGS:
TELL ME.
GAPPS:
Click here to download this gapps.
Downloads:
25-03-2019
aosp-9-20190325-prague-haky86.zip
Android 9.0.0 R34.
Security Patches: 5 March 2019.
Video Recording: fix some lags.
Fix “preparing for setup” only with SimpleGAPPS .
Include HI6250 Hardware Overlays from GSI , thanks to Dil3mm4.
Include Phh Treble Settings from GSI to DSSI ROMs . thanks to Phhusson.
Include vndk-sp-28 blobs..
15-05-2019
aosp-9-20190515-prague-root.zip.
Android 9.0.0 R39.
May 2019 Patches.
Fix most minor bugs.
Fix Notification access.
Possible fix for BLE (with selinux rule instead!)
Fix Google Play errors:
Go to Settings.
Open Apps.
Search for Google Play Store and Google Play Services.
Give the permissions especially to storages to get Play Store worked correctley.
Installation Guides:
Download the latest update.
Make sure to have this TWRP
Reboot to TWRP, flash this rom without wiping any partition.
Go to Install > Install Image and select RECOVERY_RAMDISK.IMG as Recovery Ramdisk.
Reboot to Stock Recovery from TWRP and wipe data & cache partition, reboot enjoy the rom
Avoid wasting time with wiping data with TWRP or will never ever boot, follow my steps and will boot for sure.
XDA:DevDB Information
Android Open Source Project Pie for HI6250 Emui 8.x based, ROM for the Honor 8 Lite
Contributors
haky 86, flex1911
Source Code: http://github.com/hak86
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2018-11-18
Beta Release Date: 2018-11-18
Created 2018-11-18
Last Updated 2018-11-22
let's reserve one post, screenshots are under "Screenshots" tab in the OP. have a nice day!
** New ROM **
New build is ready.
Follow steps to boot it as I did.
Check screenshots in attached files.
problem in partition length
haky 86 said:
New build is ready.
Follow steps to boot it as I did.
Check screenshots in attached files.
Click to expand...
Click to collapse
hi
i have a problem when i try to flash recovery the twrp it says
( target reported max download size of 471859200 bytes
sending 'recovery' (24954 KB)...
OKAY [ 0.630s]
writing 'recovery'...
FAILED (remote: partition length get error))
i have emui 8 with official rom from p8lite 2017
and it has a E recovery mode when the bootloader was lock and i didnt wipe any partition
can u help me plzzzzzzzzzzzzzzzzz?
** ROM **
New flashable version is up, check the op for the last changelog.
Honor 8 Lite "Prague" ROMs can be found here too.
https://www.haky86.com/pra/emui-8/
Recommended TWRP:
https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
flash the version .2
I'll push new topics for new roms in this section.
accidentlly wipe partitions and now my phone not start
haky 86 said:
New flashable version is up, check the op for the last changelog.
Honor 8 Lite "Prague" ROMs can be found here too.
https://www.haky86.com/pra/emui-8/
Recommended TWRP:
https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
flash the version .2
I'll push new topics for new roms in this section.
Click to expand...
Click to collapse
hello again.
i installed the lineage os very well ty for that
but i have some problem with GAPPs forced to stop
and i try to factory reset but accidentlly wipe every things can u help me fix that.
now my phone is in loop boot
realy need help plz!!!!
vandal051 said:
hello again.
i installed the lineage os very well ty for that
but i have some problem with GAPPs forced to stop
and i try to factory reset but accidentlly wipe every things can u help me fix that.
now my phone is in loop boot
realy need help plz!!!!
Click to expand...
Click to collapse
Join telegram group, I don't like reply.
https://t.me/EmuiDev
telegram ID not find
haky 86 said:
Join telegram group, I don't like reply.
i try to jion the gp but it say user name not found
can u inv me in group?
my username is @Arsham_chap
and my phone number is 00989376323666
im from iran
thank you very much for ur helping :good::good:
Click to expand...
Click to collapse
Is this Rom is good or not please tell me
brother please help me !!!
i need bootloader key for Honor 8 lite device . i want to run custom rom please .
looks promising but... any luck for PRA-LA1 ?
nkale862 said:
brother please help me !!!
i need bootloader key for Honor 8 lite device . i want to run custom rom please .
Click to expand...
Click to collapse
use potatoav (search google or github). it works i have honor 8 lite
Features:
- If you find an error report it in comments or in evert groups
- fix mtp
- update blobs and other changes
- go down to the change list to see more things c:
Attention !
It is forbidden to change the url by shortening links respect my time and especially that it is free and free respect the URL that I share and if you share somewhere you have to give thanks @ seba3567
respect my time invested and only allow my link to the Android file server that I shared
evert for ever?
download:
https://www.androidfilehost.com/?w=files&flid=293693
install:
1. Enter the fastboot mode
2. Run "fastboot boot [name] .img" on the command line (if you want to have it permanently, once you have started to install, select and install the image, restart it in the system and then everything will be ready. . installed
3. Enjoy it
changelog
r1
- update sources
- sync pie r35
- fix mtp
-update partition
- It has been enabled to erase the vendor partition
XDA:DevDB Information
[RECOVERY[evert]Unofficial TWRP recovery for g6 plus, Tool/Utility for the Moto G6 Plus
Contributors
sebastian3567HD
Version Information
Status: Stable
Created 2019-05-08
Last Updated 2019-05-07
Thanks! I will test bro (Y)
Working awesome!
I guess flashing other rom will overwrite installed twrp!
This was my process:
Boot twrp: fastboot boot twrp.img
Go to advanced and select install recovery ramdisk
Check backup current boot(if something goes wrong only restore it)
Swipe to install
And flash Magisk after that
Reboot
Sent from my Moto G6 Plus using XDA Labs
sorry.....
thread closed the project was sent to evert groups in Latin