Hello maybe possible change lte band from auto to band 3(1800mhz) on this phone without rooting phone?Because if i root i lost warranty.This code not works *#2263# and this method not works https://youtu.be/fEs82-BRsNA very please help.Phone always on low speed band 20 800mhz.Band 3 works but signal is not stable.Huawei mifi router works very good set only 1800mhz band 3 i waiting answer thanks.
kiesa2 said:
Hello maybe possible change lte band from auto to band 3(1800mhz) on this phone without rooting phone?Because if i root i lost warranty.This code not works *#2263# and this method not works https://youtu.be/fEs82-BRsNA very please help.Phone always on low speed band 20 800mhz.Band 3 works but signal is not stable.Huawei mifi router works very good set only 1800mhz band 3 i waiting answer thanks.
Click to expand...
Click to collapse
hi try this code *#2683662#, then go through the 2nd menu option and you should find a menu option for band selection in there somewhere.
hamzahshakeel said:
hi try this code *#2683662#, then go through the 2nd menu option and you should find a menu option for band selection in there somewhere.
Click to expand...
Click to collapse
Says service mode not supported.Another code maybe is?
Išsiųsta naudojantis SM-G955F Tapatalk 4 Lt
kiesa2 said:
Says service mode not supported.Another code maybe is?
Išsiųsta naudojantis SM-G955F Tapatalk 4 Lt
Click to expand...
Click to collapse
This then i entered code.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Išsiųsta naudojantis SM-G955F Tapatalk 4 Lt
Ah Yh the code used to work for me as well but in a recent update I believe it's been disabled, I'm not sure how to get itback again I asked the same question on a separate thread but got no reply
Related
My phone is the Vega Secret Note. The phone does work, and I am able to access LTE 2100 here in Canada with it.
I just want to double check if there isn't any bands that could be locked... I've read somewhere on Naver that it does support LTE 2600. And since LTE 2600 is LTE MAX here it would be my prefered choice if it's available somehow on my phone. I'm wondering if it could be a hidden band that needs to be selected....
*#*#4636#*#* Does work, but there is no band selection on that menu
I am trying to get RF band selection menu.
I know Samsung usually uses : *#*#2263#*#*
But there is limited info for Vega phones on here and around the web....
the closest I came to was using thise code # # 7593 # but there is no LTE band selection menu.
I found this thread assuming since these codes are also from Vega that most would work, but only 2-3 works ...
http://forum.xda-developers.com/showthread.php?t=1765464&page=16
I've attached pictures of what I have been able to access so far.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what I'm looking for...
if anyone could help or share their opinions on this...
Thanks
dortenz said:
My phone is the Vega Secret Note. The phone does work, and I am able to access LTE 2100 here in Canada with it.
I just want to double check if there isn't any bands that could be locked... I've read somewhere on Naver that it does support LTE 2600. And since LTE 2600 is LTE MAX here it would be my prefered choice if it's available somehow on my phone. I'm wondering if it could be a hidden band that needs to be selected....
*#*#4636#*#* Does work, but there is no band selection on that menu
I am trying to get RF band selection menu.
I know Samsung usually uses : *#*#2263#*#*
But there is limited info for Vega phones on here and around the web....
the closest I came to was using thise code # # 7593 # but there is no LTE band selection menu.
I found this thread assuming since these codes are also from Vega that most would work, but only 2-3 works ...
http://forum.xda-developers.com/showthread.php?t=1765464&page=16
I've attached pictures of what I have been able to access so far.
View attachment 2609951 View attachment 2609952 View attachment 2609953 View attachment 2609954
This is what I'm looking for...
View attachment 2609955
if anyone could help or share their opinions on this...
Thanks
Click to expand...
Click to collapse
Try to ##7593#
as i know N920P is with LTE Band 1800 and 2600 from what i check from some site. after i unlock this unit , it still only runs on 3G
anyone here encounter the same as me too ? how to enable the LTE or the set actually doesnt comes with LTE in GSM only Runs on CDMA LTE ?
anyone can clarified ?
thanks .
kit_kit said:
as i know N920P is with LTE Band 1800 and 2600 from what i check from some site. after i unlock this unit , it still only runs on 3G
anyone here encounter the same as me too ? how to enable the LTE or the set actually doesnt comes with LTE in GSM only Runs on CDMA LTE ?
anyone can clarified ?
thanks .
Click to expand...
Click to collapse
- make sure network mode is set to automatic
- ##data#
- edit
- LTE
- LTE Roaming enable
- check the box - let it sit for a minute or reboot and you should be good.
rogerandgina said:
- make sure network mode is set to automatic
- ##data#
- edit
- LTE
- LTE Roaming enable
- check the box - let it sit for a minute or reboot and you should be good.
Click to expand...
Click to collapse
After i check LTE enable ,
network mode is automatically change to LTE/CDMA , there is no network after all .
kit_kit said:
After i check LTE enable ,
network mode is automatically change to LTE/CDMA , there is no network after all .
Click to expand...
Click to collapse
Do you have the correct apn? These are for at&t:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rogerandgina said:
Do you have the correct apn? These are for at&t:
View attachment 3807884
View attachment 3807885
Click to expand...
Click to collapse
i am not in US. i guess i have the right APN which my 3G is working well .
AT&T is not using band 1800 , 2600 i guess .
any guys encounter the same ?
I've seen many screenshots of other huawei phones showing the network type icon beside both signal bars (eg. 4G and 2G or 4G and 3G. My huawei mate 9 shows only the network icon if the mobile data enabled sim. But i also want to know if the calls only sim is currenrly on 2G or 3G, how do i enable it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for your help or hints!
What happens if you switch 4G data from sim 2 to sim 1? Will that other network indicates correctly then?
I think they removed it in latest update?
I used to see 4g icon even when connected to wifi now it disappear when on wifi.
So maybe they disabled one when the other is active.
Between which region you got?
It depends by region. Don't know why...
There is system setting in local.prop, so it can be changed if you have root and cust partition read/write.
gm007 said:
I think they removed it in latest update?
I used to see 4g icon even when connected to wifi now it disappear when on wifi.
So maybe they disabled one when the other is active.
Between which region you got?
Click to expand...
Click to collapse
Ok i understand, i have a german mate 9
5[Strogino] said:
It depends by region. Don't know why...
There is system setting in local.prop, so it can be changed if you have root and cust partition read/write.
Click to expand...
Click to collapse
Ok thanks, when i root my phone one day i will change region.^^ so stupid of huawei, why don't need europeans to know on which network they are but eg. chinese people DO need it?
giantbike said:
What happens if you switch 4G data from sim 2 to sim 1? Will that other network indicates correctly then?
Click to expand...
Click to collapse
No
Is it Possible to Enable LTE Band 1 (2100Mhz) in Moto XT1225? I have tried editing NV values in 06828 and 06829 which enables LTE Band 1 but, it's of no use. I still couldn't use LTE Band 1. Vodafone India uses LTE Band 1. Looks like it hasn't been enabled. Is there any other way or chance to enable it? I'm in crDroid Android based on CM14.1 with @bhb27 kernal.
My ROM:
https://forum.xda-developers.com/moto-maxx/development/rom-crdroid-android-t3491257
Please Help.
Thanks.
gokkul.v said:
Is it Possible to Enable LTE Band 1 (2100Mhz) in Moto XT1225? I have tried editing NV values in 06828 and 06829 which enables LTE Band 1 but, it's of no use. I still couldn't use LTE Band 1. Vodafone India uses LTE Band 1. Looks like it hasn't been enabled. Is there any other way or chance to enable it? I'm in crDroid Android based on CM14.1 with @bhb27 kernal.
My ROM:
https://forum.xda-developers.com/moto-maxx/development/rom-crdroid-android-t3491257
Please Help.
Thanks.
Click to expand...
Click to collapse
Probably not. But you can see what all I did here. However, seems like you have done the same.
https://forum.xda-developers.com/showthread.php?t=2986947
Start there with post #7.
ChazzMatt said:
Probably not. But you can see what all I did here. However, seems like you have done the same.
https://forum.xda-developers.com/showthread.php?t=2986947
Start there with post #7.
Click to expand...
Click to collapse
yeah! I did the same. but do I wanna write same value to the second row like first row in 06828/29?? or wanna leave it as 0? Coz I wrote same values in all rows in 06828/29.
ChazzMatt said:
Probably not. But you can see what all I did here. However, seems like you have done the same.
https://forum.xda-developers.com/showthread.php?t=2986947
Start there with post #7.
Click to expand...
Click to collapse
After flashing those values I visited Vodafone store and a person there showed me the their CRM. the values which I wrote are seen in their CRM.
And I have a doubt.
I visited Vodafone Store and confirmed that they transmit 2G in 900Mhz, 3G in 1800Mhz and 4G in 2100Mhz in India.
My phone operates in 2100Mhz Band when I select 3G, and 1800Mhz in 2G. And no signal in 4G.
Is it possible to operate in such bands? Or since my phone as 2100Mhz support in Both 3G and 4G, the 4G is being used as 3G thinking it's 3G?
Please Help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I bought this unlocked from Amazon. Using boost mobile infinite
I called boost they said it should be able to be done from the phone
I called Motorola they said call boost
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is your model number? Is this a 5G Plus, or Stylus, or...?
We have device specific sections that you'll probably get more help in, so if we know where this thread needs to go, we can move it for you.
V0latyle said:
What is your model number? Is this a 5G Plus, or Stylus, or...?
We have device specific sections that you'll probably get more help in, so if we know where this thread needs to go, we can move it for you.
Click to expand...
Click to collapse
It's regular moto g 5g 2022 that is the model name.
You should have a toggle for 'Allow 5G' that will do what you want. If not, use the dial code *#*#4636#*#* and pick an appropriate config under Phone information -> Set Preferred Network Type that does not start with 'NR'.
fddm said:
You should have a toggle for 'Allow 5G' that will do what you want. If not, use the dial code *#*#4636#*#* and pick an appropriate config under Phone information -> Set Preferred Network Type that does not start with 'NR'.
Click to expand...
Click to collapse
Awesome. Where can I find the breakdowns of each network type. Which one is 3g. I think 4g is LTE
On the TMO network 2G is GSM, 3G is WCDMA, LTE is 4G, and NR is 5G. CDMA/EvDo would be for Verizon 2G/3G. TDSCDMA was developed in China so you won't see it deployed in the US.
fddm said:
On the TMO network 2G is GSM, 3G is WCDMA, LTE is 4G, and NR is 5G. CDMA/EvDo would be for Verizon 3G/4G. TDSCDMA was developed in China so you won't see it deployed in the US.
Click to expand...
Click to collapse
Blessings. Much appreciated. Have a great day