Related
I am currently using bootloader 10.4.4.25 and cannot install the latest cm 11
And I am using CWR 6.0.4
Can anyone advise how can I update the bootloader so I can install cm11?
Thanks
Download the latest Asus firmware, unzip the file once resulting in another zip.
Copy that zip to your tabet and flash it in CWM (that you have everything you care about backed up off the tablet goes without saying, right?). That will get you onto the latest bootloader but also wipe your custom recovery.
Boot into fastboot, flash a CM11 compatible recovery.
Reboot
Boot into recovery, do a factory wipe and then flash the rom.
Thanks for the advise. I am downoading the latest firmware from ASUS website and will install it.
I am not sure how to flash a CM11 compatible recovery from fastboot. Can you give more details please? Shoudl I follow the root instruction from the ROM post and re-root the machine again?
Thanks in advance
berndblb said:
Download the latest Asus firmware, unzip the file once resulting in another zip.
Copy that zip to your tabet and flash it in CWM (that you have everything you care about backed up off the tablet goes without saying, right?). That will get you onto the latest bootloader but also wipe your custom recovery.
Boot into fastboot, flash a CM11 compatible recovery.
Reboot
Boot into recovery, do a factory wipe and then flash the rom.
Click to expand...
Click to collapse
Hi,
was trying to install new ROM & completly wipe out OPO (Including OS). to do so got some error in zip file execution.
So tried to update TWRP (2.8.6 to 3.0.2) and now stuck into OPO boot screen.
Please help!
Thanks in advance!
BR//
Ashok
ashokyadav668 said:
Hi,
was trying to install new ROM & completly wipe out OPO (Including OS). to do so got some error in zip file execution.
So tried to update TWRP (2.8.6 to 3.0.2) and now stuck into OPO boot screen.
Please help!
Thanks in advance!
BR//
Ashok
Click to expand...
Click to collapse
Can you boot into the recovery? Or fastboot? Also before trying to install a new ROM did you backup your previous?
Durso81 said:
Can you boot into the recovery? Or fastboot? Also before trying to install a new ROM did you backup your previous?
Click to expand...
Click to collapse
Can't boot into recovery mode, maybe something went wrong while updating TWRP to 3.0.2 but can boot into fastboot.
also had backup of previous rom but since i can't boot into TWRP now so can't restore it. Earlier on TWRP 2.8.6 i was getting zip file execution error while restoring/installing new ROM.
So for now i have only access to fastboot mode, how to proceed futher?
ashokyadav668 said:
Can't boot into recovery mode, maybe something went wrong while updating TWRP to 3.0.2 but can boot into fastboot.
also had backup of previous rom but since i can't boot into TWRP now so can't restore it. Earlier on TWRP 2.8.6 i was getting zip file execution error while restoring/installing new ROM.
So for now i have only access to fastboot mode, how to proceed futher?
Click to expand...
Click to collapse
You have 2 options you can flash the stock rom and recovery via fastboot here is a guide http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541 (Just skip step 4 don't relock the bootloader specially if you want to install TWRP) Make sure you download the correct file there is a 64gb and a 16gb listed in this guide or you can download the stock file straight from cynogen OS here https://cyngn.com/support
Or you can reinstall TWRP via fastboot by downloading TWRP here https://dl.twrp.me/bacon/ and install your backup if its still there. If its not there you can either download and install any custom rom you want or if you want the stock rom go with option 1 above and then re-install twrp. (Always remeber after installing TWRP don't fully boot into the system or you will loose TWRP, boot straight to recovery once its done flashing TWRP by holding the power button and volume down. )
Durso81 said:
You have 2 options you can flash the stock rom and recovery via fastboot here is a guide http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541 (Just skip step 4 don't relock the bootloader specially if you want to install TWRP) Make sure you download the correct file there is a 64gb and a 16gb listed in this guide or you can download the stock file straight from cynogen OS here https://cyngn.com/support
Or you can reinstall TWRP via fastboot by downloading TWRP here https://dl.twrp.me/bacon/ and install your backup if its still there. If its not there you can either download and install any custom rom you want or if you want the stock rom go with option 1 above and then re-install twrp. (Always remeber after installing TWRP don't fully boot into the system or you will loose TWRP, boot straight to recovery once its done flashing TWRP by holding the power button and volume down. )
Click to expand...
Click to collapse
Thanks!
Do you recommend any video guide for option 2 (TWRP via Fastboot).
ashokyadav668 said:
Thanks!
Do you recommend any video guide for option 2 (TWRP via Fastboot).
Click to expand...
Click to collapse
Never watched a video so can't recommend one particular. But here is a link to all guides and how to http://forum.xda-developers.com/oneplus-one/general/index-oneplus-one-resources-compilation-t2843675
Also there is a one click tool here to make it easy
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
ashokyadav668 said:
Thanks!
Do you recommend any video guide for option 2 (TWRP via Fastboot).
Click to expand...
Click to collapse
Thank you Durso81,
i have successfully installed TWRP & ROM.
Thanks for your time & effort for a beginner.
Hi. I'm here for help you
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Click to expand...
Click to collapse
1) How to install? If you have stock zenui go to 1C, if you have a custom ROM go to 1A
If you don't backup all your data you lost all.
1A) First do a TWRP backup on sdcard (if you don't have sdcard just do in internal storage and save the backup on pc. Select system, data, recovery and boot. Then go to wipe - advanced wipe, select dalvik, system, data, cache and Swype.
Then reboot in fastboot.
Now your phone don't have any OS installed so don't boot. We are going to install the stock and unmodified firmware and recovery on the phone.
1B) Download Asus flashtool:
https://drive.google.com/file/d/0B9rp3AJHKJXjNmRuRUJMWmtOT3c/view
and android 7 raw firmware for
ZE552KL:
http://www.mediafire.com/file/o12vo...14.2020.1703.28_M3.10.47.3_Phone-user.raw.zip
ZE520KL: http://www.mediafire.com/file/5qrp2...14.2020.1703.28_M3.10.47.3_Phone-user.raw.zip
Now boot your phone in fastboot, connect to pc, install and open Asus flash tool, select raw file and device model and flash the firmware. If the pc don't detect your phone install the drivers.
1C) Download from Asus site the latest nougat update:
WARNING: IF YOU OPEN THE ZIP FILE THE RECOVERY FAIL TO UPDATE
And you must delete this zip and download another
ZE552KL: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/UL-ASUS_Z012D-WW-14.2020.1712.85-user.zip
ZE520KL:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE520KL/UL-ASUS_Z017D_1-WW-14.2020.1712.85-user.zip
Put in device storage and wait the device to detect the update. Tap on notification and install. If fail try in order:
-put in sdcard and update via STOCK recovery
-sideload the file from your PC via adb
-download the file with another browser and delete the previous
After that, so the same with Android 8.0 update
ZE552KL: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/UL-ASUS_Z012D-WW-15.0410.1712.31-user.zip
ZE520KL: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE520KL/UL-ASUS_Z017D_1-WW-15.0410.1712.31-user.zip
2) Flash recovery
I know there are another method to flash a recovery but this method is simply:
2A) Download twrp from this thread:
https://forum.xda-developers.com/zenfone-3/development/recovery-twrp-3-2-1-ze520kl-ze552kl-t3742765
Download Zenfone 3 toolkit from this thread:
https://forum.xda-developers.com/zenfone-3/how-to/tool-zenfone-3-one-click-tool-t3507417
2B) Unpack and go to zenfone3_clictool/twrp folder. Delete both recoveries and put the 3.2.1 twrp in folder. If you have ZE552KL rename with " twrp-3.0.2-Z012D ", if you have ZE520KL rename with " twrp-3.0.2-Z017D ". Now boot your phone in fastboot, connect to pc and open the Zenfone 3 click tool, follow the instructions and select flash twrp for your device. Reboot your phone in recovery and see if can read internal storage. If read 0B try another time.
3) Rooting is so simple. Just download Magisk
boot in twrp and flash
Xposed work well, I tested only gravitybox
Substratum works... Meh
Reserved
ExperienceTesla said:
2) Flash recovery
I know there are another method to flash a recovery but this method is simply:
2A) Download twrp: https://www.dropbox.com/s/r9o4a3elbgvg6rj/twrp-3.2.1-0-Z012-20171220-oreotest.img?dl=1
Download Zenfone 3 toolkit from this thread:
https://forum.xda-developers.com/zenfone-3/how-to/tool-zenfone-3-one-click-tool-t3507417
2B) Unpack and go to zenfone3_clictool/twrp folder. Delete both recoveries and put the 3.2.1 twrp in folder. If you have ZE552KL rename with " twrp-3.0.2-Z012D ", if you have ZE520KL rename with " twrp-3.0.2-Z017D ". Now boot your phone in fastboot, connect to pc and open the Zenfone 3 click tool, follow the instructions and select flash twrp for your device. Reboot your phone in recovery and see if can read internal storage. If read 0B try another time.
Click to expand...
Click to collapse
Great job!
However, I have a question. TWRP you mention to in 2A's version is 3.0.2 or 3.2.1?
I'm sorry that my English is bad.
So, just to be sure, I'm currently on ViperOS, I need to follow from 1A step, right? Or anything before that I have to do first?
nyanntaryou said:
Great job!
However, I have a question. TWRP you mention to in 2A's version is 3.0.2 or 3.2.1?
I'm sorry that my English is bad.
Click to expand...
Click to collapse
Is 3.2.1 . It's a beta TWRP so may have some bug. But basic functions works
tkhquang said:
So, just to be sure, I'm currently on ViperOS, I need to follow from 1A step, right? Or anything before that I have to do first?
Click to expand...
Click to collapse
Yes. You need to follow whole thread: first start with backup, save backup to pc, flash stock ecc ecc
ExperienceTesla said:
Is 3.2.1 . It's a beta TWRP so may have some bug. But basic functions works
Click to expand...
Click to collapse
Can it work on both ze520kl and ze552kl?
Thank you in advance for your kind cooperation.
nyanntaryou said:
Can it work on both ze520kl and ze552kl?
Thank you in advance for your kind cooperation.
Click to expand...
Click to collapse
No, it doesn't work on the ZE520KL.
As oreo is finally available on this phone I'll also build a new twrp version for it
(If anyone is wondering: I posted OP's twrp some time ago in the oreo beta leak thread here)
Stay tuned...
planet9 said:
No, it doesn't work on the ZE520KL.
As oreo is finally available on this phone I'll also build a new twrp version for it
(If anyone is wondering: I posted OP's twrp some time ago in the oreo beta leak thread here)
Stay tuned...
Click to expand...
Click to collapse
Thank you for the great work!
The ZE552KL TWRP works fine for flashing the Magisk at my ZE520KL but not much else
I can't wait to get a proper TWRP for my ZE520KL
Will this also work for Z012DC (Canadian 5.5" Zenfone3)? I'm running WW_14.2020.1709.68 with TWRP and rooted, would I start from 1A or 1C?
rdmozero said:
Thank you for the great work!
The ZE552KL TWRP works fine for flashing the Magisk at my ZE520KL but not much else
I can't wait to get a proper TWRP for my ZE520KL
Click to expand...
Click to collapse
Is there any issues when you flashed twrp on your phone ze520kl?
rdmozero said:
Thank you for the great work!
The ZE552KL TWRP works fine for flashing the Magisk at my ZE520KL but not much else
I can't wait to get a proper TWRP for my ZE520KL
Click to expand...
Click to collapse
I really didn't expect this to work - there's always something new to learn
mecoromeo said:
Is there any issues when you flashed twrp on your phone ze520kl?
Click to expand...
Click to collapse
You can find the proper twrp version for your devices here:
https://forum.xda-developers.com/zenfone-3/development/recovery-twrp-3-2-1-ze520kl-ze552kl-t3742765
Ok, so I flash TWRP recovery and everything is OK, but, When I start the phone, it goes to bootloop...What should I do? Am I missing a step?
@Kevinxdfun29
Flash magisk, supersu binary or the no verify file if you don't want root. Then wipe cache and dalvik .
ExperienceTesla said:
Hi. I'm here for help you
1) How to install? If you have stock zenui go to 1C, if you have a custom ROM go to 1A
If you don't backup all your data you lost all.
1A) First do a TWRP backup on sdcard (if you don't have sdcard just do in internal storage and save the backup on pc. Select system, data, recovery and boot. Then go to wipe - advanced wipe, select dalvik, system, data, cache and Swype.
Then reboot in fastboot.
Now your phone don't have any OS installed so don't boot. We are going to install the stock and unmodified firmware and recovery on the phone.
1B) Download Asus flashtool:
https://drive.google.com/file/d/0B9rp3AJHKJXjNmRuRUJMWmtOT3c/view
and android 7 raw firmware for
ZE552KL:
http://www.mediafire.com/file/o12vo...14.2020.1703.28_M3.10.47.3_Phone-user.raw.zip
ZE520KL: http://www.mediafire.com/file/5qrp2...14.2020.1703.28_M3.10.47.3_Phone-user.raw.zip
Now boot your phone in fastboot, connect to pc, install and open Asus flash tool, select raw file and device model and flash the firmware. If the pc don't detect your phone install the drivers.
1C) Download from Asus site the latest nougat update:
WARNING: IF YOU OPEN THE ZIP FILE THE RECOVERY FAIL TO UPDATE
And you must delete this zip and download another
ZE552KL: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/UL-ASUS_Z012D-WW-14.2020.1712.85-user.zip
ZE520KL:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE520KL/UL-ASUS_Z017D_1-WW-14.2020.1712.85-user.zip
Put in device storage and wait the device to detect the update. Tap on notification and install. If fail try in order:
-put in sdcard and update via STOCK recovery
-sideload the file from your PC via adb
-download the file with another browser and delete the previous
After that, so the same with Android 8.0 update
ZE552KL: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/UL-ASUS_Z012D-WW-15.0410.1712.31-user.zip
ZE520KL: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE520KL/UL-ASUS_Z017D_1-WW-15.0410.1712.31-user.zip
2) Flash recovery
I know there are another method to flash a recovery but this method is simply:
2A) Download twrp: https://www.dropbox.com/s/r9o4a3elbgvg6rj/twrp-3.2.1-0-Z012-20171220-oreotest.img?dl=1
Download Zenfone 3 toolkit from this thread:
https://forum.xda-developers.com/zenfone-3/how-to/tool-zenfone-3-one-click-tool-t3507417
2B) Unpack and go to zenfone3_clictool/twrp folder. Delete both recoveries and put the 3.2.1 twrp in folder. If you have ZE552KL rename with " twrp-3.0.2-Z012D ", if you have ZE520KL rename with " twrp-3.0.2-Z017D ". Now boot your phone in fastboot, connect to pc and open the Zenfone 3 click tool, follow the instructions and select flash twrp for your device. Reboot your phone in recovery and see if can read internal storage. If read 0B try another time.
3) Rooting is so simple. Just download Magisk
boot in twrp and flash
Xposed work well, I tested only gravitybox
Substratum works... Meh
Click to expand...
Click to collapse
My phone is now WW-15.0410.1712.31
I cant sure that my phone will boot or not after flashed twrp. So I go to fastboot mode, and boot into twrp by command:
fastboot boot twrp-3.2.1-0-Z012-20171220-oreotest.img
downloading 'boot.img'...
OKAY [ 0.786s]
booting...
But nothing happens, my phone still in fastboot mode.
I can boot into twrp with beta oreo previously released.
I think that twrp is not compatible with official oreo now.
sontranngoc said:
My phone is now WW-15.0410.1712.31
I cant sure that my phone will boot or not after flashed twrp. So I go to fastboot mode, and boot into twrp by command:
fastboot boot twrp-3.2.1-0-Z012-20171220-oreotest.img
downloading 'boot.img'...
OKAY [ 0.786s]
booting...
But nothing happens, my phone still in fastboot mode.
I can boot into twrp with beta oreo previously released.
I think that twrp is not compatible with official oreo now.
Click to expand...
Click to collapse
Try install recovery following the instructions in first post. Worked for me
If the "zenfone3 clicktool" method not work try
fastboot flash recovery twrp-3.2.1-0-Z012-20171220-oreotest.img
So reboot in recovery and give me a feedback
ExperienceTesla said:
Try install recovery following the instructions in first post. Worked for me
If the "zenfone3 clicktool" method not work try
fastboot flash recovery twrp-3.2.1-0-Z012-20171220-oreotest.img
So reboot in recovery and give me a feedback
Click to expand...
Click to collapse
Yes. I flashed the twrp successfully. But I cant boot into twrp without flashed it. I need to backup the latest stock recovery, in order to flash a new stock rom in future.
i got bootloop after trying to reboot my phone from twrp recovery. wtf
Flat Bar Indicator
w1040 said:
i got bootloop after trying to reboot my phone from twrp recovery. wtf
Click to expand...
Click to collapse
When does Android 8.0 support the Flat Bar Indicator module?
dzunghooca said:
When does Android 8.0 support the Flat Bar Indicator module?
Click to expand...
Click to collapse
Wrong thread bro
Guys i faced a wierd problem . I flashed twrp image and then twrp zip and then magisk ..i rebooted and when i tried to boot in recovery . The recovery was gone but magisk is still . What should i doo nowwww ?
What you do now is you
fastboot boot blu_sparktwrp.img
And then in twrp you flash blu_sparktwrp.zip
Reboot to twrp
Flash magisk 17.2.Zip
Done..rebot.
whizeguy said:
What you do now is you
fastboot boot blu_sparktwrp.img
And then in twrp you flash blu_sparktwrp.zip
Reboot to twrp
Flash magisk 17.2.Zip
Done..rebot.
Click to expand...
Click to collapse
It didnt work ....it goes away after a reboot
sanu26661 said:
It didnt work ....it goes away after a reboot
Click to expand...
Click to collapse
It must work. You're basically flashing TWRP temporarily, so when you are in TWRP for the first time, you have to flash the zip file so that it stays installed. Try that again, maybe you did something wrong, but it has to work, you just need the .img that you flash with your PC, and the .zip that you flash using TWRP when you boot into it the first time.
Kluxe Nobody said:
It must work. You're basically flashing TWRP temporarily, so when you are in TWRP for the first time, you have to flash the zip file so that it stays installed. Try that again, maybe you did something wrong, but it has to work, you just need the .img that you flash with your PC, and the .zip that you flash using TWRP when you boot into it the first time.
Click to expand...
Click to collapse
I booted img first then installed zip but when i reboot to recovery thers only stock recovery present ...did like 10 times results are same
the blu_spark twrp? v2?
If twrp isn't sticking, from my experience is to lock bootloader, flash stock OS and start from scratch.....
Do not flash stock with unlocked bootloader
Hello xda-comunity
I'm unable to install the oxygenos update 9.5.8 GM21BA
So I was following this guide to unlock my bootloader and root my phone with magisk.
( https://www.google.com/amp/s/www.xda-developers.com/unlock-bootloader-root-oneplus-7-pro/amp/ )
All went well. I got the notification that there is a new update (see above)
In the guide there was a step - by - step instruction on how to update the phone and keep root. I did that.
And now when try to install the update I get a bootloop into recovery. I figured out that the op7pro is a 2 slot phone ( slot a, slot b) and when I install a update it sets the for example slot b (where the update is installed) as default.
So when something goes wrong it just loads up the "previous" slot (in this example slot a) as default again and says that the update failed to install. Correct me if I'm wrong .
And now to the my problem, the phone doesn't load on slot b nor does it default back to slot a, instead I get a recovery bootloop when I'm in slot b.
The fix here is to flash twrp via fastboot and load slot a again, my phone then boots up like normal.
And here is the problem I can't install the update because I probably messed up slot b.
I know it's a long post and I appreciate every possible answer. Thanks in advance.
Wipe Data, Dalvik.
Flash the OTA, TWRP Installer.
Reboot to Recovery.
Flash the ROM, TWRP Installer again.
Reboot to Recovery.
Flash Magisk and other zips like roms or kernels
Reboot system
This will install on both slots
whatthekj said:
Wipe Data, Dalvik.
Flash the OTA, TWRP Installer.
Reboot to Recovery.
Flash the ROM, TWRP Installer again.
Reboot to Recovery.
Flash Magisk and other zips like roms or kernels
Reboot system
This will install on both slots
Click to expand...
Click to collapse
Thanks for the quick response I will try that as soon as I'm home from work. How do I find the ota? Can I download it? Or is it saves in a folder on the phone? Because I downloaded it like 3 times now.
jollyjumper2000 said:
Thanks for the quick response I will try that as soon as I'm home from work. How do I find the ota? Can I download it? Or is it saves in a folder on the phone? Because I downloaded it like 3 times now.
Click to expand...
Click to collapse
Use this thread https://forum.xda-developers.com/oneplus-7-pro/how-to/oneplus-7-pro-global-repo-oxygen-os-t3930585 and download the correct OTA for your phone. Copy it to the root of your phone then flash it in TWRP and follow the steps I gave you.
whatthekj said:
Wipe Data, Dalvik.
Flash the OTA, TWRP Installer.
Reboot to Recovery.
Flash the ROM, TWRP Installer again.
Reboot to Recovery.
Flash Magisk and other zips like roms or kernels
Reboot system
This will install on both slots
Click to expand...
Click to collapse
On step 3 do I need to flash the rom new? even tho if i keep it stock? or do you mean the ota?
jollyjumper2000 said:
On step 3 do I need to flash the rom new? even tho if i keep it stock? or do you mean the ota?
Click to expand...
Click to collapse
Sorry I worded that oddly.
If you want to keep it stock then:
Wipe Data (Optional but recommended), Dalvik.
Flash the OTA, TWRP Installer.
Reboot to Recovery.
Flash the OTA, TWRP Installer again.
Reboot to Recovery.
Flash Magisk and/or kernels (Step is optional)
Reboot system
If youre installing a custom ROM like Havoc then:
Wipe Data, Dalvik.
Flash the OTA, ROM then TWRP Installer.
Reboot to Recovery.
Flash the ROM, TWRP Installer again.
Reboot to Recovery.
Flash GApps and Magisk (Step is optional)
Reboot system
whatthekj said:
Sorry I worded that oddly.
If you want to keep it stock then:
Wipe Data (Optional but recommended), Dalvik.
Flash the OTA, TWRP Installer.
Reboot to Recovery.
Flash the OTA, TWRP Installer again.
Reboot to Recovery.
Flash Magisk and/or kernels (Step is optional)
Reboot system
If youre installing a custom ROM like Havoc then:
Wipe Data, Dalvik.
Flash the OTA, ROM then TWRP Installer.
Reboot to Recovery.
Flash the ROM, TWRP Installer again.
Reboot to Recovery.
Flash GApps and Magisk (Step is optional)
Reboot system
Click to expand...
Click to collapse
No need to say sorry i´m so greatful for your help.
thanks again
whatthekj said:
Sorry I worded that oddly.
If you want to keep it stock then:
Wipe Data (Optional but recommended), Dalvik.
Flash the OTA, TWRP Installer.
Reboot to Recovery.
Flash the OTA, TWRP Installer again.
Reboot to Recovery.
Flash Magisk and/or kernels (Step is optional)
Reboot system
If youre installing a custom ROM like Havoc then:
Wipe Data, Dalvik.
Flash the OTA, ROM then TWRP Installer.
Reboot to Recovery.
Flash the ROM, TWRP Installer again.
Reboot to Recovery.
Flash GApps and Magisk (Step is optional)
Reboot system
Click to expand...
Click to collapse
Ok so I flashed the ota and twrp installer and rebooted into recovery
but now I cant find the ota and twrp installer files in the root folder. Maybe bec I´m on slot b now?
I dont know how to flash it the second time
Can i flash it from ADB on the PC? Because i flashed it from twrp. when yes what are the commands for it?
jollyjumper2000 said:
Ok so I flashed the ota and twrp installer and rebooted into recovery
but now I cant find the ota and twrp installer files in the root folder. Maybe bec I´m on slot b now?
I dont know how to flash it the second time
Can i flash it from ADB on the PC? Because i flashed it from twrp. when yes what are the commands for it?
Click to expand...
Click to collapse
You can drag the files back into the root of your phone and flash them on the other slot. You could ADB fastboot but just dragging the zips to your phone is easier in my opinion.
whatthekj said:
You can drag the files back into the root of your phone and flash them on the other slot. You could ADB fastboot but just dragging the zips to your phone is easier in my opinion.
Click to expand...
Click to collapse
Sorry if Iam stupid but is that how it works?
I flash the zips on slot a then reboot to boot into slot b to flash it there again?
Because I dont get it, am I missing something here?
Edit: Seems like I Bootloop into recovery on slot b.
jollyjumper2000 said:
Sorry if Iam stupid but is that how it works?
I flash the zips on slot a then reboot to boot into slot b to flash it there again?
Because I dont get it, am I missing something here?
Edit: Seems like I Bootloop into recovery on slot b.
Click to expand...
Click to collapse
Yes you flash on both slots. If youve already flashed both then flash magisk and reboot to system. It should take about 10min to boot so dont worry.
Edit: If youre getting a bootloop or having bugs then follow this https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-f to get back to stock international
Then follow https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322 then flash Magisk and reboot
This is ONLY if you cannot get it to boot after updating
whatthekj said:
Yes you flash on both slots. If youve already flashed both then flash magisk and reboot to system. It should take about 10min to boot so dont worry.
Click to expand...
Click to collapse
Ok but how do i do that when slot b is empty?
I dont know how to put files on slot b.
When I switch slots I have to reboot.
I can only boot into system on slot a.
whatthekj said:
Yes you flash on both slots. If youve already flashed both then flash magisk and reboot to system. It should take about 10min to boot so dont worry.
Edit: If youre getting a bootloop or having bugs then follow this https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-f to get back to stock international
Then follow https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322 then flash Magisk and reboot
This is ONLY if you cannot get it to boot after updating
Click to expand...
Click to collapse
Your link gets me to the front page of the Oneplus 7 pro Guides, News, etc....
It should've taken you to the Fastboot thread. Look at this one instead https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Alright i flashed the ROM new
Was able to install the newest ota just perfect.
Kept it unrooted, I think I'm gonna let it unrooted because of all the work I have to do Everytime a new ota comes (maybe later when the phone is older)
Thank you so much for your help.